Can UCCHECK be performed on already UNICODE migrated system during ECC upgr

Hi there,
Can UCCHECK be performed on already UNICODE migrated system during ECC upgrade?
If NO, why? What is the technical reason?
Prakash

Hi,
first unicode means
Unicode is a 16-bit code to represent universal character set, which is used to facilitate a better exchange of data between different systems.
for uncheck
The transaction UCCHECK is used to find Unicode related issues. You can use transaction UCCHECK to examine a Unicode program set for syntax errors without having to set the program attribute "Unicode checks active" for every individual program. From the list of Unicode syntax errors, you can go directly to the affected programs and remove the errors. It is also possible to automatically create transport requests and set the Unicode program attribute for a program set.
why you are checking second time.
Regards,
Madhu

Similar Messages

Please help ! Can I cut-off New G/L migration date during fiscal year ?

Dear Experts
I know that the principles of migration date of New G/L migration should be on first day of fiscal year and Year-end closing of the old fiscal year must be complete before New General Ledger Accounting is activated.
However, if I need, can I cut-off new G/L migration date during fiscal year before year-end closing ? And Which points should be concern.
Best regards,
Suphawat

Hi,
First you should have installed the cockpit., you should have completed the testing and migrated the transports before the end of the Fiscal year which is 31st March in your case. Depending on the scenario, this will take 20 - 40 days.
You can begin the migration once your year end activity is performed.
If you have not installed the cockpit and completed the configuration and tested it.. forget it for this year, do it next year.
Hope this is clear now.
Edited by: Jayaraman N on Apr 7, 2011 10:41 AM

Can I cut-off New G/L migration date during fiscal year ?

Dear Experts
I know that the principles of migration date of New G/L migration should be on first day of fiscal year and Year-end closing of the old fiscal year must be complete before New General Ledger Accounting is activated.
However, if I need, can I cut-off new G/L migration date during fiscal year before year-end closing ? And Which points should be concern.
Best regards,
Suphawat
Moderator: Please, search SDN

Hi,
First you should have installed the cockpit., you should have completed the testing and migrated the transports before the end of the Fiscal year which is 31st March in your case. Depending on the scenario, this will take 20 - 40 days.
You can begin the migration once your year end activity is performed.
If you have not installed the cockpit and completed the configuration and tested it.. forget it for this year, do it next year.
Hope this is clear now.
Edited by: Jayaraman N on Apr 7, 2011 10:41 AM

MDMP Unicode Conversion problem during ECC upgrade

hi Experts,
I met a problem when upgrade from 4.6c to ecc 6.
in 4.6c, some key users made some chinese written entries in table field while he/she was logon as English, so, the language field in this entry is "EN" although the actual language was written by chinese, after upgrade to ECC6, we found the chinese words became messy code, maybe it was due to the chinese were encoded by english codepage during conversion, my question is, how can I avoid this? I really don't want this happen in our PRD upgrade.
The second question is: if a field contains both chinese and english, then, which language should it be assigned? english or chinese? I'm afraid if we assign this word as "EN" in vocabulary, then, after upgrade, the chinese part will be messy code.
Thank you for your kind suggestions.
Freshman

Hi,
you can either use transaction SUMG (manually) to repair the entries ( you have to add the according table - please check unicode conversion guide for details) or you need to change the language key in the table to Chinese if you want the Unicode conversion to convert the data correctly.
To your second question: If the English texts are restricted to US7ASCII characters ("normal" English without special characters) those texts containing Chinese and English words can (and must !) be assigned to ZH, as US7ASCII characters are included in the Chinese code page.
Best regards,
Nilsn Buerckel

Unicode Migration on MaxDB - create indices - R3Load

Hi Folks!
Currently we are performing an Unicode Migration (CU&UC) ECC 6.0 on Windows 2003 / MaxDB 7.6.
We are using migration monitor for parallel export and import with 12 R3Load processes on each side.
Export is finished successfully but import is taking very long for index creation.
There is one strange behaviour:
import_state.propeties -> all packages are marked with "+" except one:
S006=?
When I take a look at S006.STR there is only one table (S006) and two indices (S006ADQ, S006Z00) listed.
Taking a look at Import installDir:
S006.TSK shows:
T S006 C ok
P S006~0 C ok
D S006 I ok
I S006~ADQ C ok
S006.TSK.bck shows:
T S006 C xeq
P S006~0 C xeq
D S006 I xeq
I S006~ADQ C xeq
I S006~Z00 C xeq
S006.log shows:
(DB) INFO: S006 created#20081203192452
(DB) INFO: Savepoint on database executed#20081203192453
(DB) INFO: S006~0 created#20081203192453
(DB) INFO: Savepoint on database executed#20081203193256
(IMP) INFO: import of S006 completed (4858941 rows) #20081203193256
(DB) INFO: S006~ADQ created#20081203193351
(DB) INFO: S006~ADQ created#20081203193351
(DB) INFO: COSP~1 created#20081203193504
(DB) INFO: COSP~2 created#20081203193920
(DB) INFO: RESB~M created#20081203194032
(and many many more)
There is only one R3Load running at the moment (others are finished)
I am not a MaxDB pro but what it looks like (to me):
All packages have been imported successfully and import_monitor is creating MaxDB indices using just one R3Load for creation and S006.log to log all the (secondary) indices which have been created.
This procedure is taking very long (more than 12 hours now). Is this a normal behaviour or is there any way to speed up index creation after data has been imported?
If I recall correctly, using Oracle each R3Load creates table, imports data and creates indices right afterwards.
On MaxDB it looks like index creation is performed with just one R3Load after all tables have been imported.
I have read a note about MaxDB parallel index creation which might be the reason for this behaviour (only one index creation at a time using parallel server tasks). But taking a look at the import runtime this doesn't seem to be efficient.
Any ideas or suggestions?
Thanks a lot.
/cheers

You´re right with what you see/saw. That behaviour is caused by the task how MaxDB created indexes. It uses "server tasks" to get all the blocks/pages from disk and create the index. If more than one index creation would run in parallel, it would take much more time because they would "fight" for the max. number of server tasks.
You can see what the database is doing by executing
x_cons <SID> sh ac 1
Unfortunately there is no way of changing that behaviour....
Markus

I know my back up exists I can see it on disk utility but migration and disc utility wont work to restore my back up on my new hard drive it shows up with the message "this disk is already in use" i am so done. someone pls help me

I know my back up exists I can see it on disk utility but migration and disc utility wont work to restore my back up on my new hard drive it shows up with the message "this disk is already in use" i am so done. someone pls help me

Otherwise software may be attempted to access the drive. The the computer up in Safe Mode by holding shift when you turn it on. Also be sure to power off and on the hard drive itself.

Can i seperate ABAP conversion from the Unicode Migration Process ?

Hi all,
I don't have detailed technical information about ABAP programs and i need to deliver a project (unicode migration project) which needs some time arrangements. Because of that, we're trying to find out other ways to decrease the total time.
As SAP guide says; before the migration, we must convert the ABAP programs. When we check them, only ABAP programs that our developers wrote, need to be converted. So the question is; is it possible to seperate these steps ? I mean, go on the unicode migration without converting ABAP programs and meanwhile, change ABAP programs in another SAP system (similar to the live one). With this process, save some time and then import the converted ABAP programs to the migrated unicode system. Is it possible ?
Any help will be appreciated, thanks in advance.

I currently am using Postbox during the trial period because the frustration of trying to solve this ridiculous problem I posted about above was too much. Unlike most people, I won't rant and rave about OS X's decline after Lion and Mountain Lion as I never had major issues after upgrading to either of them. It's just beyond belief that the magnitude of this last problem being able to break an app within something that is just supposed to "work" that is beyond me.
Anyway, I was wondering if anyone who uses Postbox might be able to offer a suggestion or two about how to import mailboxes from a Time Machine backup as I would still like to have access to those folders which were "On My Mac" with all of the archived messages which were contained within each of them? I know that you can import from Apple Mail, but that's only if it is currently set up they way you want it to be. And as I no longer have those settings because I can't restore to the point before I deleted all the accounts, etc. from Mail in my frustration -- I'm sure I can't just point Postbox to some plist file to have it mimic my old Mail setup.
Anyone?

Migration error The operation can only be performed if the following objects are writable

Hi Experts ,
The operation can only be performed if the following objects are writable:The project is not in the repository, but there are some read-only files
Component com.*******k.custsmry.comp.VcCustSumryRptComp
Read-only: D:\software\nwds -7.31SP12\eclipse\workspace.jdi\LocalDevelopment\DCs\******\portal_dev\custsmry\_comp\src\packages\com\*******\custsmry\comp\VcCustSumryRptComp.wdcomponent
Regards
Govardan

Hi jun wu,
Making it writable in windows works ,
Actually my dc migrations is from nwds 7.01 to 7.3 ,
in 7.01 it is NWDI , the dc is under a track so im migration the dc individually to 7.3 , i.e one by one instead of migrating the entire Track.
After migration required dcs from 7.01 to 7.3 we are planning to move that to new track in 7.3 .
will it have any impact when that dc is moved to new track ? is it right approach to make it wirtable throught windows.
Regards
Govardan

Can i know some thing about unicode errors

can i know some thing about unicode errors

Hi,
UCCCHECK is to check if all your programs are UNICODE compatiable.
Now UNICODE means
Unicode - Overview
Before release 6.10, SAP supported different codes for representing characters of different fonts, for example ASCII, EBCDIC as single-byte code pages or double-bytecode pages:
ASCII (American Standard Code for Information Interchange) encodes every character with one byte. This means that a maximum of 256 characters can be displayed (strictly speaking, standard ASCII only encodes one character using 7 bit and can therefore only represent 128 characters. The extension to 8 bit is introduced with ISO-8859). Examples of common code pages are ISO-8859-1 for Western European, or ISO-8859-5 for Cyrillic fonts.
EBCDIC (Extended Binary Coded Decimal Interchange) also encodes each character using one byte, and can therefore also represent 256 characters. For example,EBCDIC 0697/0500 is an IBM format that has been used on the AS400 platform for Western European fonts.
Double byte code pages require between 1 and 2 bytes per character. This enables the representation of 65,536 characters, of which only 10,000 to 15,000 characters are normally used. For example, the code page SJIS is used for Japanese and BIG5 for traditional Chinese fonts.
Using these character sets, all languages can be handled individually in one ABAP-based SAP system. Difficulties arise if texts from different incompatible character sets are mixed in one central system. The exchange of data between systems with incompatible character sets can also lead to problems.
The solution to this problem is the use of a character set that includes all characters at once. This is realized by Unicode Unicode (ISO/IEC 10646) . A variety of Unicode character representations is possible for the Unicode character set, for example UTF, in which a character can occupy between one and four bytes.
From release 6.10, the SAP NetWeaver Application Server supports both Unicode and non-Unicode systems. Non-Unicode systems are conventional ABAP systems, in which one character is usually represented by one byte. Unicode systems are ABAP systems that are based on a Unicode character set and which have a corresponding underlying operating system, including a database.
Before release 6.10, many ABAP programming methods were based on the fact that one character corresponds to one byte. Before a system is converted to Unicode, ABAP programs must therefore be modified at all points where an explicit or implicit assumption is made about the internal length of a character.
ABAP supports this conversion using new syntax rules and new language constructs, whereby emphasis was placed on retaining as much of the existing source code as possible. As a preparation for the conversion to Unicode - but also independently of whether a system will actually be converted to Unicode - the checkbox Unicode checks active can be selected in the program properties. The transaction UCCHECK supports the activation of this check for existing programs. If this property is set, the program is identified as a Unicode program. In a Unicode program, an additional stricter syntax check is performed than in non-Unicode programs. In some cases, statements must also be enhanced by using new additions. A syntactically correct Unicode program will normally run with the same semantics and the same results in Unicode and non-Unicode systems. (Exceptions to this rule are low-level programs that query and evaluate the number of bytes per character). Programs that are required to run in both systems should therefore also be tested on both platforms.
In a Unicode system, only Unicode programs can be executed. Before converting to a Unicode system, the profile parameter abap/unicode_check should be set to "ON" so that only the execution of Unicode programs is permitted. Non-Unicode programs can only be executed in non-Unicode systems. All language constructs that have been introduced for Unicode programs can, however, also be used in non-Unicode programs.
It has been established that existing programs that have been programmed with no errors mostly fulfill the new Unicode rules and therefore require very little modification. Conversely, most programs that require significant changes are due to an error-prone and therefore questionable programming style. Even if you are not planning a conversion to a Unicode system, Unicode programs are preferable because they are more easily maintained and less prone to errors. Just as outdated and dangerous language constructs are declared obsolete and are no longer permitted for use in ABAP Objects, the rules for Unicode programs also offer increased security when programming, for example when working with character fields and mixed structures. This applies particularly for the storage of external data (for example using the file interface), which has been completely reviewed for use in Unicode programs. When creating a new program, SAP therefore recommends that you always identify the program as a Unicode program, and older programs can be converted to Unicode in stages.
Regards,
Shakir

How to improve the performance of the Data Migration program ?

Hi All,
I have written a program for Data Migration of Opportunities, but it is taking a lot of time to create or update opportunities.
I have used so many function modules like
" 'CONVERSION_EXIT_ALPHA_INPUT' " -- 8 TIMES
"GUID_CREATE'" -- 4 TIMES
"CRM_ORDER_READ" -- 1 TIME
"CONVERT_INTO_TIMESTAMP" -- 4 TIMES
"CRM_ORDER_MAINTAIN" --- 1 TIME
"CRM_ORDERADM_H_CHANGE_OW" - 1 TIME
"'BAPI_BUSPROCESSND_SAVE" -- 1 TIME
"BAPI_TRANSACTION_COMMIT" -- 1 TIME
"BAPI_BUSPROCESSND_CREATEMULTI" OR "BAPI_BUSPROCESSND_CHANGEMULTI"
and all these function modules are for every record in a loop. for 1000 records it is taking 75 min approximately. How i can improve its performance ?

Hi Raman,
For Performance improvment do the following things:
First Remove the CRM_ORDER_READ and use the tables to get the data and then use Read Statement on Internal Tables.
Second, Instead of BAPI_BUSPROCESSND_CREATEMULTI use BAPI_OPPORTUNITY_CREATEMULTI and then use BAPI_TRANSACTION_COMMIT. No need to use 'BAPI_BUSPROCESSND_SAVE.
Third thing, Not sure why you are creating guid 4 times, No need to generate guid if you use BAPI_OPPORTUNITY_CREATEMULTI. Guid will get generated.
Fourth, instead of using 'CONVERSION_EXIT_ALPHA_INPUT' multiple times, create a variable of req. length and then pass the values.
Hope this helps.

Essbase Perform backup, recovery, application migration and task automation

Hi Everyone,
I am very new (actually starting) to Essbase and trying to learn it from the documentation and examples available on the web. At my job, we just are planning to use Hyperion Essbase for planning and budgeting application. As I am the Oracle DBA so the installation and admin tasks are falling on my shoulders. Can you please refer me to the documentation, Note or References for Essbase Performing backups, recovery, application migration, task automation and optimization. Or a starting point from where I can explore the Essbase administration part only.
Thanks
-Samar-

Hi,
There is documentation available
Oracle Hyperion Enterprise Performance Management System Backup and Recovery Guide Release 11.1.1.3 =
http://download.oracle.com/docs/cd/E12825_01/epm.111/epm_backup_recovery/launch.html
or pdf version - http://download.oracle.com/docs/cd/E12825_01/epm.111/epm_backup_recovery.pdf
System 9.3.1
http://download.oracle.com/docs/cd/E10530_01/doc/epm.931/hfm_backup.pdf
All documentation
http://www.oracle.com/technology/documentation/epm.html
Cheers
John
http://john-goodwin.blogspot.com/

My appstore n camera icon has gone..anyone can help me..i already try to go setting and restriction but did not works..

My appstore n camera icon has gone..anyone can help me..i already try to go setting and restriction but did not works..
I also cannot update ios..how to solve this problem..?

Your going to have to perform a restore.

Can only access emails through OWA after migration from exchange 2007 to 2013

can only access emails through OWA after migration from exchange 2007 to 2013, in other words unable to access mails through outlook or from other Applications services.
needed RCA ... plz help..

Hi,
From your description, you can send and receive messages only when you use OWA after migration from Exchange 2007 to Exchange 2013. If I have misunderstood your concern, please let me know.
In your case, I recommend you create a new test mailbox in your Exchange 2013 and check if you can send and receive messages on Outlook. If yes, it is recommended to create a new profile to solve this issue.
Hope this can be helpful to you.
Best regards,
Amy Wang
TechNet Community Support

Can we use Perform statement in start routine ,Form and endform.

Hi,
Can we use Perform statement in start routine ? Then write the ABAP code between Form and Endform.
Example : Can I use Perform ABC in start routine. Then define ABC at the end of start routine.
      Form ABC,
      ......<ABAP> code .....
      Endform.

Hi,
In BI 7.0 we have start routines defined using Class where you might be able to create your own performs, but in case of BW3.5 Start routines are defined using Form so there I don't think it will allow you to create one more form.
But you can surely try both the approaches.
Reards,
Durgesh.

How can I purchase an app already installed by another user?

We're using MacBooks in our business and I'm the new IT guy there. Basically I've discovered that due to lots of disregard by my predecessor (who is now my boss...>_>), people have apps installed on their computers that they don't "own" due to the fact his Apple ID is the one that they belong to. This presented a problem today when one of my coworkers tried to use Keynote, required an update to open a file, and was denied further progress due to needing my boss's Apple ID (eventually we just logged in as him and installed the update in order to keep things moving).
Is there some way to clear off apps that don't belong to a current user so that user can repurchase the app from the App Store with their own account and/or not be nagged by updates they can never complete due to Apple ID mismatches? Otherwise they just say "Installed" or "Update" and the users can't do a thing about it. I'd like to be able to reinstall Keynote to his machine under his Apple ID and also know how to fix this problem down the line when it's sure to happen again so people can reinstall apps/update apps already on their machines with their own Apple IDs.

You company has started a journey down the wrong road and you could have a mess of a future ahead.
Company Macs are not consumer Macs and should not be set up with personal Apple IDs. You should speak to the Volume Licensing division of Apple for advice on setting up Macs with company Apple IDs and volume licenses.
http://www.apple.com/business/vpp/

Can UCCHECK be performed on already UNICODE migrated system during ECC upgr

Similar Messages

Maybe you are looking for