Can USA Mac Pro and Screen be used on 220 ?

Have Mac Pro for 6 months, just been relo'd overseas can my Mac Pro work ? Specs say either 110 or 220, but not sure what I need to do, if anything

Nothing, other than an adapter to convert the plug pin configuration as required. The power supply can be used with both 100-120V 60 Hz and 220-240V 50Hz power sources without doing anything.

Similar Messages

How can i stream(air mirroring) *.mkv files between Mac Pro and AppleTV2 by using quicktimeX?

How can i stream(air mirroring) *.mkv files between Mac Pro and AppleTV2 by using quicktimeX?
Need support!

How can i stream(air mirroring) *.mkv files between Mac Pro and AppleTV2 by using quicktimeX?
As stated you can't. Even if the compressed data is TV compatible, the container is not. If the file is playback compatible with the QT X Player, you can, of course, play the file on your main system and "mirror" its display to the TV. Unfortunately, this normally means only the video is played back via the TV device. On the other hand, if you convert the MKV content to an TV compatible file (or move the compressed data to an TV compatible container if the data is already TV compatible), then you can mirror the QT X player (with audio) to the TV device in the full screen mode, air play/mirror it from iTunes (or any mobile device), or stream it directly from itunes.
Basically, what you can do here depends on the compressed data in the MKV file container and how you define "mirroring."

I got a new Mac Pro and I am using my 30 inch cinema display. It has been flickering grey sometimes and then will stay grey and I have to reboot... this is very annoying..help. I have reset the pram and that seems to help for a bit but then it starts up

I got a new Mac Pro and I am using my 30 inch cinema display. It has been flickering grey sometimes and then will stay grey and lock up my computer and I have to reboot... this is very annoying..help. I have reset the pram and that seems to help for a bit but then it starts up again...and please don't tell me to check for software updates:)

I got a new Mac Pro and I am using my 30 inch cinema display. It has been flickering grey sometimes and then will stay grey and lock up my computer and I have to reboot... this is very annoying..help. I have reset the pram and that seems to help for a bit but then it starts up again...and please don't tell me to check for software updates:)

HT201343 If you have a Mac Pro and want to use airplay, this work great with an apple TV set up!

http://airparrot.com/download/Mac/AirParrot.dmg
Now like my iOS and MacBook Air I can use apple tv on my Mac Pro tower! Try before you buy!

Yes count your self lucky. AirPlay is extremely failure prone and very aggravating to most users. Espeically if you do not have EXTREMELY high end networking hard ware if you are using WiFi. If you insist on going down this road you can look into an app called AirPariot. It might let you use AirPlay..... but again I wouldn't

I have moved from a G5 Powermac to an Intel Mac Pro and am porting over Items from a Backup HDD. How can I access and use drawings and documents created on the PC computer on the Intel computer ?

I have moved from a G5 Powermac to an Intel Mac Pro and selectively porting over items from a backup hard drive.
How can I access and use documents and drawings created on the PC based computer ?

Clarisworks, you need Appleworks, which will only work with Mac OS X10.6.8 or earlier. See this tip if you must go newer. Mac Pros with newer hardware configuration than July 20, 2011 can't use Mac OS X 10.6.8 or earlier without this tip and then it would be Mac OS X Server. I'm not sure if the new black Mac Pro supports that configuration or not.
iPhoto, there is an iPhoto for all versions of Mac OS X.
iTunes, there is an iTunes for all versions of Mac OS X. Note with iTunes versions 11 and later, which are needed for syncing with iOS 7 or or later, you will lose coverflow, if you liked that feature. Sadly you can't run an older version of iTunes from within Mac OS X 10.9 or later.
Sketchup: http://help.sketchup.com/en/article/60107 shows the versions that will work with intermediate Mac OS X versions, and this shows the latest version: http://help.sketchup.com/en/article/36208 be sure to click on the operating system you choose to use.
GIF - Viewing GIFs Apple's Preview can do that. Editing them, I like http://www.lemkesoft.com/ Graphicconverter.
DMG is able to be opened by all versions of Mac OS X. This are just "disk images" which store programs on a virtual disk that will open when double clicked. Frequently you'll find the installer of the said program inside. To find out if the program itself is compatible with 10.7 through 10.9, see http://www.roaringapps.com/
Otherwise see the resources on:
https://discussions.apple.com/docs/DOC-2455
If you end up deciding to stick with Snow Leopard.

Can the Mac Pro run Window XP (booth camp) and be used as a MAc OS server

Hi There
Can the Mac Pro run Window XP (booth camp) and be used as a MAc OS server in the same time?
I am a small business and I was thinking of using the new mac pro for a new workstation on my studio and to also use it as a server for 5 work others stations. Is that possible? Or I am asking a bit to much work load to do for the Mac Pro?
Can the Mac Pro can run under Window XP and Autocad and still be accessed by other workstation whilst working on the cad software? Is booth camp will slow the machine like Virtual PC?
IS the MAc Pro can manage file hosting website with PHP and mySQL capabilites?
CHARLES
MAC PRO Mac OS X (10.4.7)

Great question, but it appears the answer is no (at this time); they promise to work on it immediately. Check this thread at parallels.
http://forum.parallels.com/thread3659.html
iMAC G5 20" - 2GB RAM - 150 GB Hard Drive Mac OS X (10.4.6) Also MacMini & MacBook Pro Intel Core Duo - OS X & WIN2K

I just opened my new Mac Pro and I have a USB keyboard, not a bluetooth -- it doesn't recognize the USB keyboard and I can't get past the "bluetooth keyboard pairing" screen.

I just opened my new Mac Pro and I have a USB keyboard, not a bluetooth -- it doesn't recognize the USB keyboard and I can't get past the "bluetooth keyboard pairing" screen.

What specific KB?
Do you know it works?
I set my 2103 nMP with an older (black) Apple USB KB and it worked fine

What is better Mac Mini or Mac Pro and 4K 40" screen or iMac 5K for work with Exel

I am working on Macbook pro retina for around 16 hours a day, it is ok but the screen is to small. I am opening about 25 - 30 EXCEL windows, 20 - 25 safari windows at the same time. Excel windows are small, they only show 40 rows and S column Now I am considering buying iMac 5k ( but the screen is only 27", however a very high resolution but I think that fonts and digits displayed may be too small ). I am also considering Mac Mini or Pro with 40" 4K TV ( 4k computer monitors are 27 - 31" , so better idea would be purchasing iMac 5k ) . The problem is that 40 - 42" TV don't have Display Port ( I can't find it anywhere )
Please help me to choose what would suit my needs better. I need large screen to work comfortably with an Excel sheets. What is better? Mac Mini or Mac Pro and 4K 40" screen or iMac 5K for work with Excel ?. The other problem I have is that when I spend 16 hours at work with retina macbook , my eyes are ok. Using the 30'' Dell screen 2560/1440 my eyes are tired after 2 hours.
Thanks for your help on advance
Best regards
David

Currently you can only get 4 K at 30 Hz via HDMI. Some users have reported jerky curser movement because of the 30 Hz.
I would go for the 5K iMac. You can add a second screen at 4K.
FaceTime HD camera
Simultaneously supports full native resolution on the built-in display and up to 3840 by 2160 pixels on an external display
Support for extended desktop and video mirroring modes
The Mac Mini supports:
Support for up to two displays at 2560 by 1600 pixels, both at millions of colors
Thunderbolt digital video output
Native Mini DisplayPort output
DVI output using Mini DisplayPort to DVI Adapter (sold separately)
VGA output using Mini DisplayPort to VGA Adapter (sold separately)
Dual-link DVI output using Mini DisplayPort to Dual-Link DVI Adapter (sold separately)
HDMI video output
Support for 1080p resolution at up to 60Hz
Support for 3840-by-2160 resolution at 30Hz
Support for 4096-by-2160 resolution at 24Hz
The 2013 Mac Pro can use three and more displays:
Mac Pro (Late 2013): Using multiple displays - Apple Support
I would go for multiple screens

I install windows 7 on my mac pro. and participate in windows 7 to 50gb 2 disk. but now i cannot enter my mac. only windows is appearing what should i do. when try enter my mac want me to format rest of disk. how can i reinstall my mac

i install windows 7 on my mac pro. and participate in windows 7 to 50gb 2 disk. but now i cannot enter my mac. only windows is appearing what should i do. when try enter my mac want me to format rest of the disk. how can i reinstall my mac?

If you use Windows program to partition the Hard Drive, the Apple partition gets destroyed.
Windows does not understand it is a guest on your Mac, and throws garabge wherever it pleases.

I have a new mac pro and can't get a side scroll bar. What can I do to get this?

I have a new mac pro and can't get a side scroll bar. How can I get this?

The scroll bar is now set to appear automatically when you start scrolling with a trackpad or scroll wheel mouse. If you are using an mouse without a scrolling device, you should change a setting.
In System Preferences, click General, and in the Show Scroll Bars section, click the option for how you want it to work. If you want to see them all the time click "Always."

Just got a new mac pro and can't manage to set a password and keep it. It keeps telling me I have the wrong password.

Just got a new mac pro and can't manage to set a password and keep it. It keeps telling me I have the wrong password. I want to start over and I can't even get back in to do this bc it won't take any of my passwords. How can I start over completely?

You got a new laptop? try asking there or in Lion forum.
If it has Lion, use the Recovery Mode boot Command-R
Use that to erase and reinstall - it has network install ability.
Want MacBook Pro forum or Lion Community?
MacBook Pro
Lion Mac OS X Communities
New, as in from Apple, it would have asked for full setup.
Want to reset the password? (it is used then I'd wipe it clean and start over)
How to run the Password Reset utility in OS X 10.7 Lion

Can my mac pro Bluetooth talk to my new ATV using Bluetooth to send slideshows

Can my mac pro Bluetooth talk to my new ATV using Bluetooth to send slideshows, music and movies

You know you don't have to buy a replacement dvd drive from apple. For example, take a look at OWC's selection.
You don't say what year your mac pro is so I use a 2008 as an example. On that page click the little picture that shows a 2008 mac pro. That will take you to this page. And there's an example of a Lite-On drive.
In addition, on the right side of that page are links to instructional videos on how to add the drive to your machine. Click, for example, Optical, med (medium) and you will see how straight forward it is to change the optical drive.

I just got my first mac pro and I can't get the photos out of iPhotos moved on my hp external hard drive, I try export says unable, then I try to drag it from the desktop to the external hard drive but same problem. Thank you so much

I just got my first mac pro and I can't get the photos out of iPhotos and move them on my hp external hard drive, I try export says unable, then I try to drag it from the desktop to the external hard drive but same problem. what to do? Thank you so much

How is your external drive formatted? Use Disk Utility to check the volume format. If it is NTFS, you will need to reformat the HDD as exFAT in order to retain universal compatibility (RW to it on both Mac and Windows).

I have a Mac Pro and it seems to have a malware. How can I remove it

I have a Mac Pro and seems like it has a malware, adware . How can i remove it. MACkeeper keeps on popping

You installed the "DownLite" trojan, perhaps under a different name. Remove it as follows.
Malware is constantly changing to get around the defenses against it. The instructions in this comment are valid as of now, as far as I know. They won't necessarily be valid in the future. Anyone finding this comment a few days or more after it was posted should look for more recent discussions or start a new one.
Back up all data.
Triple-click anywhere in the line below on this page to select it:
/Library/LaunchAgents/com.vsearch.agent.plist
Right-click or control-click the line and select
          Services ▹ Reveal in Finder (or just Reveal)
from the contextual menu.* A folder should open with an item named "VSearch" selected. Drag the selected item to the Trash. You may be prompted for your administrator login password.
Repeat with each of these lines:
/Library/LaunchDaemons/com.vsearch.daemon.plist
/Library/LaunchDaemons/com.vsearch.helper.plist
/Library/LaunchDaemons/Jack.plist
Restart the computer and empty the Trash. Then delete the following items in the same way:
/Library/Application Support/VSearch
/Library/PrivilegedHelperTools/Jack
/System/Library/Frameworks/VSearch.framework
Some of these items may be absent, in which case you'll get a message that the file can't be found. Skip that item and go on to the next one.
From the Safari menu bar, select
          Safari ▹ Preferences... ▹ Extensions
Uninstall any extensions you don't know you need, including any that have the word "Spigot" in the description. If in doubt, uninstall all extensions. Do the equivalent for the Firefox and Chrome browsers, if you use either of those.
This trojan is distributed on illegal websites that traffic in pirated movies. If you, or anyone else who uses the computer, visit such sites and follow prompts to install software, you can expect much worse to happen in the future.
You may be wondering why you didn't get a warning from Gatekeeper about installing software from an unknown developer, as you should have. The reason is that the DownLite developer has a codesigning certificate issued by Apple, which causes Gatekeeper to give the installer a pass. Apple could revoke the certificate, but as of this writing, has not done so, even though it's aware of the problem. This failure of oversight is inexcusable and has compromised both Gatekeeper and the Developer ID program. You can't rely on Gatekeeper alone to protect you from harmful software.
*If you don't see the contextual menu item, copy the selected text to the Clipboard by pressing the key combination command-C. In the Finder, select
          Go ▹ Go to Folder...
from the menu bar and paste into the box that opens by pressing command-V. You won't see what you pasted because a line break is included. Press return.

Can a Mac pro tower be laid on its side for use

Can a Mac Pro Tower be placed on its side and be used that way without any damage occurring?

Yes. Did that with mine for years. Only issue was even though the Pioneer has a DVD "lip" to hold in place it was awkward at times.
I use something like a coffee table. Put a rubber backed pad to absorb sound vibration, allows all those messy cables to go underneath (and curtain would be nice too).

Can USA Mac Pro and Screen be used on 220 ?

Similar Messages

Maybe you are looking for