Can use 4G network

hi,
my SIM card ,network provider and my passport cell phone should support the 4G network, but i can't find the 4G section at "Settings->Network and connections -> Mobile Network -> Network Mode". I only could see 2G, 3G, and 2G & 3G.
how can i use 4G network?

funny, in my passport "network mode" does not appear at all thereby not allowing selection of any "G" ...I can only assume this is carrier specific (I have AT&T USA) & the hand-off from one "G" to another is handled by the tower to give the most efficient available... I have seen the 4G symbol from time to time depending where I lurk...
10.3.1 SW .1779 OS .2726 WLAN .1.1 Radio .2727

Similar Messages

One computer can use the network while another can't even see it?

Hello helpful people...
I have a MacBook Pro (original release) and my roommate has an iBookG4. I have had a two-airport network system for years and never had a single issue with connectivity. About 2 months ago, my roommate's iBook started having trouble finding not only our network, but any network... now three shipments to Apple later, they have changed the airport card twice, the logic board, the RAM, etc. All other aspects of the computer seem to be working fine now, except that when I click on the airport icon at the top of the screen, it pulls up no networks. On my MacBook (sitting side by side with the iBook), I usually hit about 10 networks in my condo. Naturally, this would mean that there must still be something wrong with the airport card... but wait... it gets better.
When I take the iBook to the Apple Store... it works PERFECTLY. And I feel stupid. What the ****? Do any of you have any clue as to what is going on?
More specifically, if I type in the name of my network so that it can try to join. It keeps telling me that the password is invalid (and trust me... it's the right one). Also, if I EVER get it to connect to the network (it's hit or miss), it will self-assign an IP address and will never hit the internet. All of this is happening as I use my MacBook Pro on the same network and type this. I am so frustrated (as is my roommate).
Any ideas would be much appreciated.

Yes, you can do this. The registration doesn't have to be done on the same system the iPhone is going to be used with.

Where do I find user properties for network printers so that I can use a network printer

Wanting to connect to a PC networked Xerox 4595 workcenter ... the print job spools, but I need to add my user to those with permission to use that printer. How do I access this information on a MacBook Pro? (Printer properties don't include this information)

Are you connecting to a printer shared from the server, shared by a PC or directly to the printer via the network itself.

Can I use a network hard drive for time machine

Can I use a network drive for my time machine back up. I currently have a 1TB WD AND its full with mostly videos and other back ups?

Such a configuration is not supported. This does not mean it will not work, but it is not guaranteed to work reliably.
Considering the "mission profile" for a backup strategy, you should consider this an unacceptable application for Time Machine.
Read Apple Support Communities contributor Pondini's Time Machine FAQ discussion regarding this subject here:
http://pondini.org/TM/2.html
Scroll down to the pink box.
There are other, significant concerns regarding sharing a Time Machine volume with other content. Time Machine needs to have control of the whole volume.
More info here: Mac Basics: Time Machine

How can I allow network users to use File Sharing on 10.8 Server?

I am in the process of setting up a new OS X 10.8 Server. I have exported/imported the network users from my previous OS X 10.6.8 Server using Workspace Manager. I have re-entered the passwords of the users. I have existing clients running (stil logged in).
I have set up the File Sharing service in Server.app. I have several mount points. I have made the Users mount point available for home directories over AFP.
Now, the system administrator can connect to the server and get access to the file shares. So the basic file sharing system works.
Also: the users on a client can get there password verified (e.g. when unlocking screen protection) by the server. It is just AFP they can't get access to, while the system administrator account (OD /Local on the server) can be used. So, the password in the server is OK too. It seems to be a matter of privileges.
But no network user (OD user in directory /LDAPv3/127.0.0.1 on the server) can get access. Where can I give network users privileges for File Sharing on the server?
I did try to add either the "Open Directory Users" group or a specific user that was imported into com.apple.access_afp. If I do that, there is partial success. I can connect to the server from the client with a user account other than system administrator from the server (but connecting is slow). But Mobile Home Sync does not work:
1:: [13/04/05 16:11:10.379] Scheduling next sync of "HomeSync_Mirror" at 2013-04-05 14:11:20 +0000
1:: [13/04/05 16:11:20.782] ==========================================================
0:: [13/04/05 16:11:20.782] Starting automatic sync of "HomeSync_Mirror".
1:: [13/04/05 16:11:20.786] Peer "network" reports changes since last sync.
1:: [13/04/05 16:11:20.786] [0x7fd5a9224760/<SStore_FS:0x105db3420>] +[SStore_FS newStore_FSForPeer:alias:]: isRemote = NO
1:: [13/04/05 16:11:20.786] [0x7fd5a9224760/<SStore_FS:0x105db3420>] +[SStore_FS newStore_FSForPeer:rootPath:rootAlias:rootRef:storePath:optionalStoreID:]: peer = <SPeer_FS:0x7fd5a5009520> = local, optionalStoreID = (null), peer.storeIDString = *
1:: [13/04/05 16:11:20.786] [0x7fd5a9224760/<SStore_FS:0x105db3420>] +[SStore_FS newStore_FSForPeer:rootPath:rootAlias:rootRef:storePath:optionalStoreID:]: rootPath        = /Users/gerben
1:: [13/04/05 16:11:20.786] [0x7fd5a9224760/<SStore_FS:0x105db3420>] +[SStore_FS newStore_FSForPeer:rootPath:rootAlias:rootRef:storePath:optionalStoreID:]: storePath       = /Users/gerben/.FileSync/store.filesyncstatetree
1:: [13/04/05 16:11:20.787] [0x7fd5a9224760/<SStore_FS:0x105db3420>] +[SStore_FS newStore_FSForPeer:rootPath:rootAlias:rootRef:storePath:optionalStoreID:]: rootAlias       = {path='/Users/gerben', targetName='gerben', volumeName='Macintosh HD', type=DIR, volumeCreateDate=2010-08-10-12:58:16, targetCreateDate=2011-08-28-18:39:13, parentDirID=37638, nodeID=3003598, filesystemID=0000 ('0000'), signature=0x482b ('H+'), isBootVolume=YES, isAutomounted=NO, isEjectable=NO, hasPersistentFileIDs=YES, mounted=YES, url='file://localhost/'}
0:: [13/04/05 16:11:20.789] -[SPeer_FS _mountServerCallbackShares:status:]: received error 64
0:: [13/04/05 16:11:20.790] EXCEPTION: _mountServerCallbackShares:status: (Host is down) <-[SPeer_FS mountPeerVolumeWithURLString:] (Peer-FS.m:446): "'(-1)' error 64">
0:: [13/04/05 16:11:20.790] USERINFO: {
0:: [13/04/05 16:11:20.790]     NSLocalizedDescription = "Host is down";
0:: [13/04/05 16:11:20.790] }
0:: [13/04/05 16:11:20.790] BACKTRACE: {
0:: [13/04/05 16:11:20.790] ? | 0x105cb79b7
0:: [13/04/05 16:11:20.790] ? | 0x105cbf0e5
0:: [13/04/05 16:11:20.790] ? | 0x105c2c866
0:: [13/04/05 16:11:20.790] ? | 0x105c2babd
0:: [13/04/05 16:11:20.790] ? | 0x105c2acb4
0:: [13/04/05 16:11:20.790] ? | 0x7fff858bb72a
0:: [13/04/05 16:11:20.790] ? | 0x7fff858bb6a2
0:: [13/04/05 16:11:20.790] ? | 0x7fff874cf8bf
0:: [13/04/05 16:11:20.790] ? | 0x7fff874d2b75
0:: [13/04/05 16:11:20.790] }
1:: [13/04/05 16:11:20.790] Peer "network" is unable to sync. (-[SPeer_FS mountPeerVolumeWithURLString:] (Peer-FS.m:446): "'(-1)' error 64")
0:: [13/04/05 16:11:20.790] Peer "network" is unable to sync. Not enough peers will be available to continue syncing.
0:: [13/04/05 16:11:20.790] Aborting sync of "HomeSync_Mirror".
1:: [13/04/05 16:11:20.790] -[SPeer abortSync] "local"
1:: [13/04/05 16:11:20.797] -[SStore_FS setupWithAlias:andRef:] (Store-FS.m:447): unlink('/Users/gerben/.FileSync/.fstemp.QW1Gh-bhvgEhVwmG3.noindex')
0:: [13/04/05 16:11:20.798] EXCEPTION: !IF <-[SPeer(protected) doPrepareForSyncWithResolvedConflicts:] (Peer.m:1149): "'(([self checkAbort]))'">
0:: [13/04/05 16:11:20.798] BACKTRACE: {
0:: [13/04/05 16:11:20.798] ? | 0x105c2bb66
0:: [13/04/05 16:11:20.798] ? | 0x105c2acb4
0:: [13/04/05 16:11:20.798] ? | 0x7fff858bb72a
0:: [13/04/05 16:11:20.798] ? | 0x7fff858bb6a2
0:: [13/04/05 16:11:20.798] ? | 0x7fff874cf8bf
0:: [13/04/05 16:11:20.798] ? | 0x7fff874d2b75
0:: [13/04/05 16:11:20.798] }
1:: [13/04/05 16:11:20.798] -[SStore_FS deleteStateTreeTurdFile] (Store-FS.m:476): unlink('/Users/gerben/.FileSync/store.filesyncstatetree.statetree_dirty')
1:: [13/04/05 16:11:20.798] Peer "local" is unable to sync. (-[SPeer(protected) doPrepareForSyncWithResolvedConflicts:] (Peer.m:1149): "'(([self checkAbort]))'")
0:: [13/04/05 16:11:20.798] Peer "local" is unable to sync. Not enough peers will be available to continue syncing.
1:: [13/04/05 16:11:20.798] EXCEPTION: SFAbortedException <-[SSyncEngine _waitForPeers:] (SyncEngine.m:1922): "'(_abort)'">
1:: [13/04/05 16:11:20.798] -[SSyncEngine threadMain_SyncEngine_sync:]: sync failed with exception "-[SSyncEngine _waitForPeers:] (SyncEngine.m:1922): "'(_abort)'"".
0:: [13/04/05 16:11:21.066] Sync of "HomeSync_Mirror" encountered errors. (_mountServerCallbackShares:status: (Host is down))
0:: [13/04/05 16:11:21.067] Last successful sync completed at 2013-04-04 20:17:15 +0000.
0:: [13/04/05 16:11:21.067] Finished sync of "HomeSync_Mirror".
1:: [13/04/05 16:11:21.067] Scheduling next sync of "HomeSync_Mirror" at 2013-04-05 14:31:21 +0000
1:: [13/04/05 16:11:21.284] 1-pass sync of "HomeSync_Mirror" took 0.02 seconds

Hi Gerben,
Try creating a brand new user, that's not imported and see if that works. Every user/group has a little gear in the Server.app/Users or Groups which allows specific access to specific services, perhaps filesharing is off in that section?
Is your DNS setup properly? Can you verify that clients can see the FQDN of your server?
After setting up the Users folder for mobilehomes, did you check whether the group and the separate users have access to filesharing? I am able to select the correct homefolder /Users and restrict the homefolder size.
Goodluck!
Jeffrey

Requirement is to run CMD.EXE under the Local System Account. So that we can map a network drive to be used by a windows service, which will be created by command: - net use z: \\servername\sharedfolder /persistent:yes

Environment:
OS: Windows 7 32/64 bit, Windows 2008 Server 64
bit/ Windows 2012 Server 64 bit
Priority:
- Critical
Requirement: - Since
the Windows Service is running under the Local System Account, we would like to emulate this same behaviour.
Basically, we would like to run CMD.EXE under the Local System Account. So that we can map a network drive to be used by a service using following
command
net use z: \\servername\sharedfolder /persistent:yes.
Already Attempt:
We tried to launch the CMD.exe using the DOS Task Scheduler AT command. Here’s a sample command:
AT 10:36 /interactive cmd.exe
But I received a warning that “due
to security enhancements, this task will run at the time excepted but not interactively.”
It turns out that this approach will work for XP, 2000 and Server 2003 but due to session isolation
Interactive services no longer work on Windows 7, Windows Server 2008 and above.
2. We
tried to create a secondary Windows Service via the Service Control (sc.exe) which merely launches CMD.exe.
<Drive>:\sc create RunCMDAsLSA binpath= "cmd" type=own type=interact <Drive>:\sc
start RunCMDAsLSA
In this case the service fails to start and results it the following error message:
FAILED 1053: The service did not respond to the start or control request in a timely fashion.
3. One
suggestion, we found to launch CMD.exe via a Scheduled Task, but
it is not giving any option to launch CMD.exe in interactive mode; so that I can map network drive using net command.
4. I read an article, which
demonstrates the use of PSTools from SysInternals. I launched the command line and executed following command
psexec -i -s cmd.exe
PSTools worked fine, but It seems that in scope of Sysinternals Software License
Terms. You may not "use the software for commercial software hosting services."
Application will deploy on client, which will be like commercial,
so we are not able to use PSTools.
Kindly assist us for achieving the requirement. We have tried all the ways, but nothing is working for us. Kindly suggest.
I will be really thankful.

Hi Sir,
Nothing worked from above for us. You can see our remarks on posted query.
That’s why, we posted on forum.
And there will not be any vulnerability, because, if we will use "net
use ..."
in network domain; definitely,
we will provide username and password of mapped drive system.
And, that system, itself is given by client; so that, there must not be any vulnerability; they are ready to provide user name and password.
We need a way; by which we can complete the requirement. Kindly assist.
Regards,
S. P. Singh

I have an airport extreme and express, if I use the extreme as a base station connected to my old router can I use the express to extend the signal while also creating a new network that only I can use?

I have an airport extreme and express, if I use the extreme as a base station connected to my old router can I use the express to extend the signal while also creating a new network that only I can use? Essentially having two wifi connection off the same network? If so how do I set this up?

Extending using a wireless connection always results in a performance compromise.
If the Express is going to extend using a wireless connection, then the Express will need to be located about half way between the AirPort Extreme and the general area where you need more wireless coverage. The more that you have line-of-sight between the Extreme and Express, the better the network will operate.
Remember......the Express can only "extend" the quality and signal speed that it receives, so it needs to be located where it can get a very good signal from the Extreme. Although Apple cleverly uses the term "extend", a more accurate term for the Express would be "repeater".
If the Express will extend by connecting to the Extreme using a permanent, wired Ethernet cable connection......highly recommended for best performance.....then the Express can be located exactly where you need more wireless coverage. There is no signal loss at all through the Ethernet cable, so the Express gets a full speed signal no matter where it might be located.
Post back to let us know which way to you want to go.

Can you use a network share as location for users' home

I am running a Mac mini with Mountain Lion and Server.app as a home server. For added storage space I have a NAS. I would like to set up the open directory network users' home share on the NAS. Is that even possible?
I am able to mount the network share on the mini using either afp or nfs, and I can also add the NAS share as a home folder enabled share in the server.app and select that as location for a users home folder, but that only results in the user not being able to log on to his account. Is there something that I am missing or is what I am trying to accomplish simply not possible?

It used to be officially supported to use NFS for clients to access their network home directories but with Lion (and Mountain Lion) this was no longer officially supported.
Therefore the need as I mentioned to 're-share' the volume via AFP. As you implied this does unfortunately impose an additional network overhead as traffic has to go as follows.
client ----> AFP ----> Server -----> NFS -----> NAS
What you could consider to help at least a little bit is to connect the server to the NAS on a totally separate network to the network the server uses to talk to the clients on. The main network would be between the server and clients, and you would use a second Ethernet connection just link the NAS and the server. As the clients will not need to talk directly to the NAS this will not be a problem. This would at least mean that each network only gets one set of traffic either AFP or NFS but not both and means the server can use both at full speed at the same time.
The Mac Pro still has two built-in 1Gbps Ethernet ports but you can also get either a USB3 Ethernet adaptor or a Thunderbolt to Ethernet adaptor (I have used one of these on a Mac mini server).
If you did not already have the NAS then people starting from new would be better off either getting a Thunderbolt RAID which can be directly attached to the Mac server, or at the higher-end go the traditional route of setting up a SAN and using an FDDI connection.
Note: You can now get Thunderbolt to FDDI interfaces.

Can I use a network hard drive to store my music

This might be more of an Itunes question, but I would like to know if there is a problem using a network Hard drive to store all my music on? I'll be using 2 computers to access it, 1 computer handles my kids for there Ipods each having there own logins, and the 2nd computer for my Ipod..
Or do I need to have one computer with 3 seperate logins.. I just want to do things the right way without violating anything.
Thanks for your help.

No problem with using network drive. Many do.
Easiest when doing this from the start but can be done at any time. Some things will depends on drive. For me, only one can access drive at a time. create a folder on network drive for the library to be in. For each user on each computer map the folder on the network drive to a drive letter. Set iTunes to use this mapped drive as the library location.
Notes to be aware of. Each user will have access to all files on network drive. Files added by one user will be accessible to other users but they must manually add them to their own library. If multiple users subscribe to same podcast there will be duplicate files of episodes in folder. If one user deletes a file from device other users will be affected if tracks was in their library.

Can you use a network hard drive to store your music

This might be more of an Itunes question, but I would like to know if there is a problem using a network Hard drive to store all my music on? I'll be using 2 computers to access it, 1 computer handles my kids for there Ipods each having there own logins, and the 2nd computer for my Ipod..
Or do I need to have one computer with 3 seperate logins.. I just want to do things the right way without violating anything.
Thanks for your help.

No problem with using network drive. Many do.
Easiest when doing this from the start but can be done at any time. Some things will depends on drive. For me, only one can access drive at a time. create a folder on network drive for the library to be in. For each user on each computer map the folder on the network drive to a drive letter. Set iTunes to use this mapped drive as the library location.
Notes to be aware of. Each user will have access to all files on network drive. Files added by one user will be accessible to other users but they must manually add them to their own library. If multiple users subscribe to same podcast there will be duplicate files of episodes in folder. If one user deletes a file from device other users will be affected if tracks was in their library.

How can I use Guest network when my internal server provides the DNS?

How can I use guest network when my internal server provides the DNS? The help article TS4505 tells me to enter an external DNS server, but I believe I can not configure my network that way...

Apple assumes that you will be connecting the Time Capsule to a simple modem....and.....that the Time Capsule is configured as a router to provide DHCP and NAT services for the network.
The Guest Network cannot be enabled correctly unless the Time Capsule is in charge of DHCP and NAT services on the network.
Another way of saying the same thing is that the Guest Network will not operate correctly if the Time Capsule is configured in Bridge Mode or DHCP Only.

Using the Parallels program to run a Windows program, can two Macs network to use the Windows program?

When using the Parallels program to run a Windows program, can I network my MacBook Pro with my friend so we can use the same Windows program.

Not legally.

My iphone can use only one network

Hi, my iphone can use only Orange network. I live in mauritius and i just bought my iphone from Mauritius telecome Orange. Now when i insert another network on it, it says please insert simcard. I cant use other network on this. Is it possible to unlock it, and how?
Some people told me to jailbreak it :O i dont wana do this!
Please help me out.. i really love using iphone

If Orange won't unlock your iPhone, and I'm sorry to say that according to Apple's information they do not offer unlocking (though call them to confirm) your only recourse would be to sell the iPhone and purchase a new one in the country to which you move, should you do so.
Regards.

I can't make or receive calls in my iPhone 5(just bought second hand and unlocked), but I am able to use 3G network. If I use the same SIM card in other phone it works fine. I have tried network resetting and restore.

I can't make or receive calls in my iPhone 5(just bought second hand and unlocked), but I am able to use 3G network. If I use the same SIM card in other phone it works fine. I have tried network resetting and restore.
I bought this cheap from an unknown persons. I have checked it is not in blacklist. And unlocked by apple.

Those are all carrier features, so contact your cell phone provider.

Sir you have replied for my question, and i updated my software and all those things, yet it is showing unable to connect network, but i can use internet by sim, is it the problem related with hardware? can you tell me a solution for it?

sir you have replied for my question, and i updated my software and all those things, yet it is showing unable to connect network, but i can use internet by sim, is it the problem related with hardware? can you tell me a solution for it?

you seem to be referring to an ongoing issue
click here to respsond -> sir help me to enable my network connection, my iphone 4s is not connecting with any wireless connection, what i should do for enabling network connection?
CCC

Can use 4G network

Similar Messages

Maybe you are looking for