Can users access iPlanet Calendar Server 2.0 (iCS 2.0) from anywhere?

Can users access iPlanet Calendar Server 2.0 (iCS 2.x) from anywhere?

Regardless of whether you are a remote user, mobile user, or in the
office every day, you need access to your calendaring information anytime from
anywhere. iCS 2.x provides a personal calendar and event solution that can be
any device that includes a web browser. iCS 2.x works with other Alliance
solutions such as Sun Internet Mail Server and Netscape Messaging Server
software to ensure complete access to your calendar data regardless of location,
platform, or browser.

Hi,
Thank you for your suggestion. I have tried with your option also. Still I am getting the second time userid/password dialogue box.
Is there any other solution to avoid the second time user authentication dialogue box?
Do you want to see the ACL file?
Thanks & Regards,
Murthy

Similar Messages

Where can I find iPlanet Calendar Server resources?

Where can I find iPlanet Calendar Server 2.0 resources on the iPlanet web site?

See the Technical Resources page at: 
http://www.iplanet.com/support/technical_resources/ics/.

Do a backup.
Quit the application.
Go to Finder and select your user/home folder. With that Finder window as the front window, either select Finder/View/Show View options or go command - J. When the View options opens, check ’Show Library Folder’. That should make your user library folder visible in your user/home folder. Select Library. Then go to Calendars.

Does iPlanet Calendar Server 2.x (iCS 2.x) support IETF iCalendar standards?

Does iPlanet Calendar Server 2.x (iCS 2.x) support IETF iCalendar
standards?

iPlanet Calendar Server was designed from the ground up to support
IETF calendar
standards. Its standards-based features make it easier for users to
share
calendaring information across the network. As standards continue to
evolve and
emerge, iPlanet will continue to support for these new IETF standards.
The relevant IETF calendar standards are:
<ul>
<li>iCalendar (RFC2445)
<li>iTIP (RFC2446 iCalendar Transport-Independent Interoperability Protocol)
<li>iMIP (RFC2447 iCalendar Message-Based Interoperability Protocol)
<li>CAP (draft - Calendar Access Protocol)
</ul>

Does iPlanet Calendar Server 2.x (iCS 2.x) support IETF iCalendar
standards?

iPlanet Calendar Server was designed from the ground up to support
IETF calendar
standards. Its standards-based features make it easier for users to
share
calendaring information across the network. As standards continue to
evolve and
emerge, iPlanet will continue to support for these new IETF standards.
The relevant IETF calendar standards are:
<ul>
<li>iCalendar (RFC2445)
<li>iTIP (RFC2446 iCalendar Transport-Independent Interoperability Protocol)
<li>iMIP (RFC2447 iCalendar Message-Based Interoperability Protocol)
<li>CAP (draft - Calendar Access Protocol)
</ul>

With Mountain Lion Server, can users access the Messages Server from outside your network?

I would like to setup a new messaging service between my employees because we have issues with most online services. I'm thinking of getting a Mac Mini Server, so I can run Messages Server, but I have an employee outside my network. Can they login to the server remotely to use the Messages Server?
Thanks

If you're talking about setting up and using the Jabber messaging service provided by OS X server then yes, it's really easy to set up and use in and out of the office. The only trick it is, and also most other services, is a correct DNS setup so you're able to connect and use the server from the "outside".
I use this myself (via Lion server rather than Moutain Lion server) from behind a dynamic IP addressed ADSL line and have no problems whatsoever.

Problem logging into iPlanet Calendar Server from pull-down menu in Communicator

When I run the iPlanet Calendar Server's cstool
utility and enter the command 

cstool -p 80 ping name.of.server
 

I receive the message 

Calendar Server is up and running!

I can also access the LDAP service of the Calendar Server with no problem.
However, if I try to connect to this server using the pull-down menu for
Netscape Communicator 4.7 with Calendar, I receive the error message 

The server is unreachable. Verify that the network is available and that the
server application is running.

To use the iPlanet Calendar Server client, point your browser at the client
port that was specified when the iPlanet Calendar Server was installed.

For example, 

http://your_server_name:80

If you forgot which client port is specified, you can find the value for the
port number in the service.http.port
parameter in the server's
/opt/SUNWicsrv/cal/bin/config/server.conf
file.

So if you accepted the defaults during the installation process who are the database users? ias_admin? system? sys? I've tried all and gotten ORA-01017: invalid username/password; logon denied. These fail in the OEM console as well. I apologize in advance if the answer is embarassingly obvious.

IPlanet Calendar Server 5.0 WCAP commands fetchcomponents_by_range,fetchevents_by_id,fetchtodos_by_id returns the event dtstart & dtend in GMT and not in the timezone (tzid) specified in the command

hi,
i am vinod from knowledge systems pvt ltd. we are the partners with the iplanet india for customer support.
problem description :
m fetchcomponents_by_range,m fetchevents_by_id,m fetchtodos_by_id returns the event dtstart & dtend in GMT and not the timezone (tzid) requested
i have an development issue with the iplanet calendar server 5.x.if i execute WCAP command storeevents.wcap as follows for storing an event
http://localhost:portnumber/storeevents.wcap?id=n38tew98wbhhv95s&calid=userA&tzid=America/Indianapolis&rid=0&dtstart=20020419T050000Z&duration=PT1H0M&summary=eventtest&fmt-out=text/xml
in the calendar server the dtstart and the dtend for this event is as follows
dtStart = 1019210400 (20020419T100000Z) [19-Apr-02 10:00AM GMT] (isDate = 0)
dtEnd = 1019214000 (20020419T110000Z) [19-Apr-02 11:00AM GMT] (isDate = 0)
NOTE : in the WCAP command i had specified the time in America/Indianapolis i,e 0500 hrs behind GMT(-0500) hence the server stores the dtstart & dtend in the GMT which is perfect as explained in the docs.
Now for retreving the same event i execute the following command
http://localhost:portnumber/fetchcomponents_by_range.wcap?id=n38tew98wbhhv95s&rid=0&calid=vt&tzid=America/Indianapolis&fmt-out=text/xml
the result has the event details but the dtstart & dtend are in GMT and not in the America/Indianapolis timezone requested.
<START>20020419T100000Z</START>
<END>20020419T110000Z</END>
NOTE : the Mime type requested in the WCAP is text/xml. the expected dtstart is 20020419T050000Z and dtend is 20020419T060000Z applied to the timezone specified in the tzid parameter(America/Indianapolis)
issue :
m fetchcomponents_by_range,m fetchevents_by_id,m fetchtodos_by_id returns the event dtstart & dtend in GMT and not the timezone (tzid) requested
docs says the following which is not true for retrieving the events.....
For example, if a command such as storeevents or fetchcomponents_by_range
specifies a tzid parameter, the parameter value must be a tzid that is defined in the list of 91 time zones. The server will return data in that time zone and all data will have dates applied to that time zone.If the command specifies an unrecognized tzid, the server will return a GMT timezone by default. All data returned on that command will have its dates applied in GMT.
release notes has the following. i could not understand the point no. 1 could u please suggest me how to retrieve the event with dtstart & dtend values applied to the timezone supplied in the parameter tzid.
1. The following seven commands now take an additional parameter, tzid:
m deleteevents_by_id
m deletetodos_by_id
m fetchcomponents_by_alarmrange
m fetchcomponents_by_lastmod
m fetchcomponents_by_range
m fetchevents_by_id
m fetchtodos_by_id
The value of tzid must be a time zone ID string, such as “America/Los_Angeles”. Note that these are not localized. If other ISO 8601 DateTime string parameters, such as rid, dtstart and dtend, do not have a “Z” on the end, this parameter determines the time zone to use.
2. The following two commands, which already have the tzid parameter, have been modified:
m storeevents
m storetodos
The value is no longer a quoted string, but is now a time zone ID string to match the acceptable values for tzid in the seven commands listed above.The default value of the tzid parameter in all commands is the server's default time zone. This is a change for storeevents and storetodos.
thanks
vinod

I have found the solution! I post how I managed in case someone else has the same issue.
You have to go to "Settings" -> "Settings Editor".
There, there is a "display" entry.
When you open the tree, you can see both of your displays (in my case, LVDS1 and VGA1).
Under VGA1 (the "extra" monitor), there is a "Position" entry. There, you need to set the "X" variable to the last pixel of the other display resolution.
E.g.: if you principal display is a "1366x768", then the "X" value will be 1366.
You can also play on the "Y" if your screens are not horizontally aligned, but 0 should be fine.
I hope this helps :-)

ICS 2.x: Instructions for using Solstice/Legato Networker to back up iPlanet Calendar Server

Instructions for using Solstice/Legato Networker to back up iPlanet Calendar
Server

The following discussion expands upon the instructions for using the
Solstice/Legato client software to back up Calendar Server in the iPlanet
Calendar Server: Administration Guide. You can find this documentation at
the following URL: 

http://docs.iplanet.com/docs/manuals/calendar/ics21/ag/calagadm.htm#1064539

If the Solstice/Legato Networker is installed under the default directory (as
per the recommended installation procedures), there should be three files
dedicated to Solstice/Legato Networker. 

<OL>
<LI>icsasm
<LI>legbackup.sh
<LI>legrestore.sh
</OL>

To initiate the Networker backup directory image, use the command 

csbackup -l

This command creates a directory named "
backup/" in the bin
directory and corresponds to Step 1
under the procedure for Backing Up Calendar Server Data in the
iPlanet Calendar Server Documentation.

After you have initiated the directory image, you can use the following commands
to back up or restore 1) a Calendar database, 2) a specific user's default
calendar, or 3) a specific calendar. The following commands assume that the Networker
client software is installed under the /usr/bin/nsr
directory and the iCS 2.x server is
installed under the /opt
directory.

1) Calendar Database
? To back up a database: 

/usr/bin/nsr/save -s legato server host/opt/SUNWicsrv/cal/bin/backup
? To restore a database: 

/usr/bin/nsr/recover -a -f -s legato server host
/opt/SUNWicsrv/cal/bin/backup
 

2) User's Default Calendar
? To back up a user's default calendar: 

/usr/bin/nsr/save -s legato server host
/opt/SUNWicsrv/cal/bin/backup/userid
? To restore a user's default calendar: 

/usr/bin/nsr/recover -a -f -s legato server host
/opt/SUNWicsrv/cal/bin/backup/userid 

3) Specific Calendar
? To backup a specific calendar: 

/usr/bin/nsr/save -s legato server host
/opt/SUNWicsrv/cal/bin/backup/userid calid
? To restore a specific calendar: 

/usr/bin/nsr/recover -a -f -s legato server host
/opt/SUNWicsrv/cal/bin/backup/userid calid

You can also use the Networker graphical user interface to schedule backups.
For example, you could set up a client saveset to back up
/opt/SUNWicsrv/cal/bin/backup
periodically.

For more information regarding Solstice/Legato Networker software, please
see the Sun documentation at 

http://www.sun.com/storage/software/backup.html 

Also see technote 4311, "iCS 2.x: What is the difference between
csbackup/csrestore and the Solstice/Legato Networker functionality?," at 

Hi,
Check below link:
http://help.sap.com/saphelp_nwpi711/helpdata/en/f2/31ad41810c11d288ec0000e8200722/content.htm
Thanks
Sunny

Can't access google calendar with parental controls on

We are trying to give our daughter accesss to the family's Google calendar. In the parental controls we have "try to limit adult websites" as the selection. With this on, she is not able to log into the calendar - it gives a message that says something about not being able to establish a secure connection. She can go on the Google homepage without problem and search, etc. - but she can't access the Google sign-in or the calendar.
When we change the parental controls setting to "allow all websites" she can log onto the calendar without any problem.
We also tried adding the various google web address strings under the "customize" tab for "always allow these sites" while still leaving the "try to limit adult websites" as the overall setting. Even with the specific sites approved - she still can't access the calendar.
What's up?? Isn't there a way we can allow her to see the calendar without having to give her unecessary exposure to anything on the net?

So after I made my original post above I continued searching the forums and found the answer below. It refers to Googla Mail but their solution worked just as well for Google Calendar. Who knew it would be so simple. I just went into "always allow these sites" and put in the 1e100.net and it worked like a champ! The adult sites are still screened out but she can now access Google without any issue.
atobteam
Re: Why can't I access Gmail anymore when internet restrictions are in plac
Apr 10, 2010 1:52 PM (in response to atobteam)
Finally!!!!! This solution works! Yea! There are two scenarios I know of: 1. If you have users for whom under "Parental Controls/Content" you've chosen "Allow access only to these websites" (they can only get to the websites that are bookmarked by you) and if Google Mail was already a bookmark, then just do this: click the plus sign below the list in "Parental Controls/Content/Allow access only to these websites", and choose "Add Bookmark." On the pop-up, name the site "goog" or anything you want; then type in: 1e100.net in the box asking for an address. This will produce a new bookmark (named "goog" or whatever you've chosen), but will in effect just be a dummy or slave bookmark that you'll never use, but it'll allow you to get to your user's google mail sign in page by hitting the old google mail bookmark he or she used to hit. Second scenario (I have both scenarios in my home): if you have users for whom under "Parental Controls/Content" you've chosen "Try to Limit Access to Adult Websites Automatically", click the "Customize" button and then on the top of the pop-up, under "Always Allow These Websites," click the plus button and then add: 1e100.net . Then click OK. This user will now be able to get to his or her google mail sign in page.

How can I access a calendar backup from my old iPhone?

How can I access a calendar backup from my old iPhone?
I recently had to get a replacement iPhone 4. The tech at the Apple Store thought that I might have had a software problem and recommended that I not "restore from backup," but start this phone as a new device and just sync the apps and what-not. My calendar on my computer was different than the one on my old phone, though, and now I need the data from my old iPhone calendar. I did back up my old phone just prior to taking it to the Apple Store.
HELP!

Well what you can do is update to ios5 then use icloud to sync your calandar up to your phone then restore your phone as new and when prompted in the new phone setup put in your icloud username and password and you will have your calandar events back.

Can't access my Directory Server using the Console installed on a machine

can't access my Directory Server using the Console installed on a remote server, lookied into knowledge base article 4693, but still same any idea ?

I too am having problems accessing Directory server from Netscape Console installed on Winxp.
If I try to open Directory server it doesn't give any error. No windows nothing.
If I try th same from the machine on which it is installed everything is fine. What is strange is that it did open a couple of times. But at the same time I can open the admin server, Netscape Messaging server from the xp box. Searching all over for a solution. Any help/pointers would be greatly appreciated.
Config details:
iDS4.13, iMS 5.0, running on Sol 8 box
Netscape Console 4.2 on WinXP.
Thanks

Can I install iPlanet Application Server 6 on Solris on Intel

Can I install iPlanet Application Server 6 on "Solris on Intel".
Raj

Hi Raj, 
Sorry but unfortunately the short answer is no. 
The iPlanet Application Server is supported on 
UltraSPARC running Solaris 2.6 or Solaris 8 
or 
Windows NT 4.0 SP 5 
It's also available on HP-UX 11.0 and AIX 4.3.3 
but I don't know on which hardware 
You can check the documentation on http://docs.iplanet.com 
Hope this helps 
Caryl 
Sun Developer Technical Support

Does anyone know where I can download the IPlanet App Server 6.0 SP3 to get rid of this f... SP2 installation night mare on win NT

Does anyone know where I can download the IPlanet Application Server 6.0 SP3 to get rid of this f... SP2 installation night mare on win NT

Hi,
You an download the iAS6.5 from http://wwws.sun.com/software/download/download/
There is no place where you can download the SP3. Anyway 6.5 has more advance features. Anyway SP2 works fine with win NT. If you have any specific problem with installation, you can point them out. I would suggest you to use 6.5 instead.
Thanks
parsu

I can not access the calendar, reports that calendar application unexpectedly ended. please help

I can not access the calendar, reports that calendar application unexpectedly ended. please help
Os Mountain Lion

Which install type did you choose? If you chose Custom, you may not have installed OHS at all...

I recently got an apple computer at work and downloaded my Juno email on it. Now, I can not access all my past email in my juno inbox from other computers. Pls help.

I recently got an apple computer at work and downloaded my Juno email on it. Now, I can not access all my past email in my juno inbox from other computers. Pls help.

If it's a POP account and you set it up in Mail with the option to delete read messages from the server, then you can indeed no longer read it on the server. You may be able to restore the messages to the server if you also have IMAP access. Ask your mail service provider whether it's possible.

I have subscribed to I Tunes Match on my computer where I've been syncing and backing up my I Phone. Can I access my music before all the artwork is uploaded from my computer?

I have subscribed to I Tunes Match on my computer where I've been syncing and backing up my I Phone. Can I access my music before all the artwork is uploaded from my computer?

Hi,
You will no longer be able to sync manually with match. I would suggest that you wait until match has competed its process on your computer and that you are told how many tracks are in the cloud.
If you activate match on your iOS device too soon, you may find that all your tracks are not there. Ps it is not just artwork that is being uploaded, it's music as well.
Jim

Can users access iPlanet Calendar Server 2.0 (iCS 2.0) from anywhere?

Similar Messages

Maybe you are looking for