Can VC3 allow us to connect 3 webcams to laptop & then stream to Google+ Hangouts On Air?

Hellllllllp!
We are a non profit, Sena Foundation (www.sena.org), that has been offering free support for dying folks and doing free grief and loss education since 1982. A number of years ago we produced a half hour TV program (Sharing the Seasons) featuring interviews with individuals going through catastrophic loss.
The programs need to be updated and - since the economic collapse, which has cost us over 60% of our funding - there is no money to produce new programs.
Then came - Google+ Hangouts On Air.
We will be able to produce the new series with our own tech volunteers. Free!
Problem. BIG problem. We need to connect 3 webcams (probably Logitech c910 webcams) with usb cables to a laptop, and be able to stream live to On Air. We will edit on the fly, so we need to switch between the three cameras.
We are using Windows7.
Reading the info for Adobe Visual Communicator 3, it sounds like we should be able to do this.
Are we right?
What hardware (usb switcher etc?) will we need?
Is there anyone that can give us specific instructions about setting this up?
Do we need to purchase the update too?
Thanks in advance for any help you may have.
- Bill Schaefer
Sena Foundation
[email protected]

Hello Scotte525
No, I am not using VPN. I have enabled it on the server, but we don'øt need it to connect from outside. On the Macs we just type cmd-K and afp://IP-address and then we are prompte for username and password.
I had hope something similar was available on the Windows 7 computer, but i can't make it work.
And I don't know how to use VPN from the Windows laptop.
If I do what you suggest = Window-key plus R and type like you wrote \\IP-address\ I am told I cannot make a connection.
However!!!!! When I clicked "diagnose this issue" after a while the Windows computer told me that "the print and file sharing ressource (IP-address) is online but isn't responding to connection attempts.
So now I have to start looking at the server, where close to everything is enabled (and the Mac's connect without problems, so what is it that isn't responding? This is very confusing). If you have any hints (or have experince in setting up a Mac OS X server to give access to Windows 7 PC(s) I would be most grateful for your help.
Kind regards,
Peter

Similar Messages

How can i allow multiple incoming connections on my windows 8 vpn server?

Hi eveyone,
Im trying to find out how to allow more than 1 incoming VPN connection into my windows 8.1 PC and no clue how to do it without openVPN or other programs (which i have no clue how to set up either)
Im starting to use my home NAS for work where I store everything on it so when ever I go to a job I can either access it or save a new file to it. The problem is my wife also wants to use it and I dont want to not be allowed to connect when I need to or
not allow her to connect.
Is there any way I can allow 2+ incoming connections on my home PC without getting a seperate software?
If the only option is getting a seperate program can anyone provide something that I can settup to my home router so I can access the NAS by the private IP?
Thank you

Short answer - no. The client OS only allows one incoming VPN connection.
Bill

Can use HttpUrlConnection class to connect once to server, then inside loop

Hello there!
I want to ask if can I use an HttpUrlConnection class to connect once to server and then inside a loop and with the same instance send many request to a web service?
What about "persistence connections"?
Regards,
Marcello

It already uses HTTP 1.1 persistent connections and a TCP connection pool behind the scenes. There is nothing to be gained from trying to re-implement that yourself and you won't succeed. HttpURLConnection can be used for exactly one request and one response. The underlying TCP connection is reused until you call disconnect(), but there's not much control you can exert over that.

I have half downloaded an album on my Iphone 4s, but dount i have enough internet allowance to complete, can i carry on the download on my laptop then sync the music to my phone?

I have started to download an album on my phone, but I doubt my internet allowance will allow me to complete the download. On Itunes it says the album is purchased but I want to download it to my library so that i can then sync it to my phone, if this is possible?

Hi McCrubb!
I have an article here that can help you restore your iOS device more thoroughly:
iOS: Unable to update or restore
http://support.apple.com/kb/HT1808
Thanks for using the Apple Support Communities!
Cheers,
Braden

Hi I cannot play music on my Ipod lately. I can play the mucis when connected to the laptop. When not connected to laptop, all mucis icons read "No music" which is incorrect. Any ideas welcomed Frank

Hi,
I cannot play mucis on my Ipod lately and cannot solve this problem.
There is music there and I can play it connected to laptop.
Without connection to laptop I can play radio but not music.
All mucis icons read "No music" and this is not correct
Any help apprecaited
Frank

This category is for iPod shuffle. Is that the type of iPod you have, because your description of the problem does not sound like it's about a shuffle? If it's not a shuffle, what is the iPod model...?
There is music there and I can play it connected to laptop.
Are you doing the playing using the iPod, or are you playing the music using iTunes on the laptop?
All mucis icons read "No music" and this is not correct
Do these icons with "No music" appear on the laptop's screen, or on the iPod's screen

HT1296 my ipad continues to drop the wifi connection. I can get it to connect for awhile but then it drops the connection. Any ideas on how to rectify the problem

my ipad continues to drop the wifi connection. I can get it to re connect for awhile but then the ipad loses the connection. any idea how to fix this problem with the Ipad, it is very frustrating!! I have reset it, tried shutting it off and on, turned on airplane mode and then back to wifi etc??

Try update firmware of router.

Different Bluetooth connections for phone and music streaming

Can I have different Bluetooth connections for phone and music streaming functions on my 4s? If I can is there a way that the will automatically select (remember) the proper bluetooth receiver?

TDMA interference, and is a type of RFI (Radio Frequency Interference) unique to GSM mobile phones. It affects all GSM mobile phones, but is not harmful to you or your electronics. It is just an audible indicator of network activity.
GSM mobile phones generate this interference when they communicate with the cellular network. You don't need to be actively using the phone, as it constantly accessing the network to check signal strength, synchronize the clock, or perform other network-related tasks. The only way to stop this interference is to turn off the phone or its network capabilities. For example, by using Airplane Mode.

I can not acces my icloud account from my i phone it told me my password wrong , but i can acces my i cloud account from my laptop

i can not acces my icloud account from my i phone it told me my password wrong , but i can acces my i cloud account from my laptop with same password

Contact Google.

I have an iPod Touch but I currently don't have a PC. I found an app that would allow me to connect to my network drive and I was able to transfer music files to it. These files do not show under the Music app and I can't find any way to do it.

I need help from some Apple people. I have an iPod Touch and I wanted to load it up with some fresh music but I currently don't have a PC. I found an app that would allow me to connect to my 2TB network drive directly and I was able to transfer a bunch of music files to the iPod. Unfortunately, these new files do not show under the Music app and I can't seem to find any way to convince the iPod that they are music. I can play them through the file manager only. Android doesn't have this problem, any music I put on my phone is recognized as music and can be played through any of the music apps. Am I missing something or is Apple to inflexible to handle this?

You can't. The only way to get songs in the Music app is to sync from a computer or to download from iTunes.

HT1212 Old ipod, can not get it to connect with itunes & i no longer have the computer it was once synced to. It will not allow me to do anything but turn it off & on.

Old ipod, can not get it to connect with itunes & i no longer have the computer it was once synced to. It will not allow me to do anything but turn it off & on.

Place the iOS device in Recovery Mode and then connect to your computer and restore via iTunes. The iPod will be erased.
iOS: Wrong passcode results in red disabled screen
If recovery mode does not work try DFU mode.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
For how to restore:
iTunes: Restoring iOS software
To restore from backup see:
iOS: Back up and restore your iOS device with iCloud or iTunes
If you restore from iCloud backup the apps will be automatically downloaded. If you restore from iTunes backup the apps and music have to be in the iTunes library since synced media like apps and music are not included in the backup of the iOS device that iTunes makes.
You can redownload most iTunes purchases by:
Downloading past purchases from the App Store, iBookstore, and iTunes Store
If problem what happens or does not happen and when in the instructions? When you successfully get the iPod in recovery mode and connect to computer iTunes should say it found an iPod in recovery mode.

Hello, someone can please tell me, if there is an adapter or something that allow me to connect directly my iPad 2 with a printer or a flashdrive ? Thanks

Hello, someone can please tell me, if there is an adapter or something that allow me to connect directly my iPad 2 with a printer or a flashdrive ? Thanks

You can use the camera connection kit to connect, but there's no protocol for any sort of data or file transfer beyond properly named photos and videos. You can plug them in but they won't do anything.
The only printing the iPad natively supports is air print to specific printers, or printing to wifi printers with third party apps. You cannot use flash drives for data transfer (beyond the mentioned photos and videos)

K7n2 delta, won't allow me to connect to the internet via pci modem

motherboard: K7n2 delta, nforce2 ultra
won't allow me to connect to the internet via pci modem
i have got 2 computers with same mobo, can connnect through external 56k
but the 2 internal 56ks (one in each computer), will not connect.
just dials then beeps, or no dialing tone.
the 2 internal ones are differnet makes, but connect through PCI
there must be something wrong with Mobo settings or pci stuff
all internet and modem settings are correct, etc etc etc
can u help
or does anyone have a pci 56k running on that mobo?

Quote
Originally posted by Solway
i made my creative one work and dial, using pulse dialing, but it takes ages
but my other one has no dialing tone, its werid.
If your not hearing dial tone you might have your phone plugged into the wrong port. Most modems have 2 outlets, one is labeled line ( that is the one you should have plugged into the jack (RJ11C). If that's correct, query the modem and see if it tests OK, you may have a defective modem.

Need help with selecting an LCD TV that can wirelessly connect to my laptop

I specifically need to have the ability to view my laptop's display wirelessly on the tv. My office is going to use it as a presentation display so when I'm in a power point presentation on my laptop it is actually displayed on the tv. Please let me know what tv's allow this or if there is an accessory I can purchase to make the connection. I'm hoping there is a blue tooth type option or a USB receiver that can be used.

I have an LG 55" TV that allows me to stream from my router to the TV via cat5. It isDLNA compatible, so it can receive signals from any compatible device.
If you find my post useful or informative, please click the icon below with the plus sign and star to give kudos. Thank you!

Can I use iCloud without connecting to wifi?

I am using an iPhone 4. Is it absolutely necessary for me to connect to a wifi connection before iCloud works? can't I just use connect and sync everything using iCloud through my 3G mobile network? I thought that that's the point of iCloud? I do something on my iPhone, through iCloud, it magically appears on my Macbook Air. Or am I mistaken?

Contacts, calendar, notes, email, bookmarks etc all sync over any Internet connection, not just WiFi.
PhotoStream only syncs over WiFi to avoid congesting 3G networks and using up all your 3G data allowance.

How can i test my vpn connection?

so recently i decided to test if ver 1.3.0.3 of the quickvpn client would work better with the 1.3.0.5 rvs4000 firmware. i loaded quickvpn to an xp pro computer (freshly built, i might add) and got to work. in order to test the connection, i attempted to piggy back off an unsecured wireless network. this network is on the same ISP network as i am.
i use dynamic DNS, and the unsecured wireless network could resolve my IP correctly, but for some reason i couldnt connect to my home network from the unsecured network. my router is set to respond to lan requests, but i couldnt ping it. my router passes HTTP traffic to a computer in my network, but i couldnt bring up the webpage. finally, my router responds with the router config page over port 443, and i couldnt bring that up.
so i used my ISP's dialup service to test. initially, as always, i had a million problems with the vpn client. systematically, i tried to resolve the issues. i installed the patch in the readme for quickvpn. i checked log files to see where stuff was failing. eventually, i could connect to the VPN, but would get that "remote gateway is not responding" crap. i know of a (poor) workaround for this which allows you to "finalize" the connection, but that workaround doesnt allow you to ping around in your network. sometime later, after randomly messing with settings, the tunnel would connect without the workaround. i have no idea what "fixed" this.
despite all this, my 28.8Kbps connection wouldnt allow me to do anything meaningful on my network. i couldnt connect to the router or to a server of mine (http or fileshare). the only thing i could do was ping internal devices. other requests seemed to "hang" rather than timeout or do anything more concrete. basically, i gave up on testing using dialup, even though my router and the client software confirm a good connection. but i still wasnt convinced.
next, i figured i could create some type of "DMZ" on my network by placing a switch between my ISP's modem and my router. im not a cisco network professional by any means, but im pretty familiar with networking on a above-average level. that said, despite my best, i couldnt get my quickvpn computer to see my router from the "DMZ".
finally, i figured i could just test the tunnel while directly connected to my network's lan. bad idea. everything seems to go okay until it locks up on "activating policy". rebooting or otherwise ending the negotiation ends in the computer being unable to do anything anymore. when i try to ping anything, i get "negotiating ip security" ad infinitum. the only way i could fix this was by doing a system restore.
so here's the question: how can i test my quickvpn connection?why can't i just tunnel through my network? and before you scream that you can't, thegreenbow vpn client has NO PROBLEM connecting to my rvs4000 while connected to my own network.

Hi Aaron,
I am going exactly the same thing as you however, I had my cousin buy and install a RVS4000 at his house in Australia.
I access it from the USA so that I can help manage his Local Area Network, he is just not technical..
I setup a DDNS client on his RVS4000 so that I can always get to his Router via a domain name rather than a IP address.
I noticed that you didn't mention anything regarding importing client certificate into the directory of the VPN client on your PC.
I also noticed I disabled IPSec passthrough on the router in Australia, see the pictures below, not sure why, but the VPN client is working.
I also did not setup any gateway to gateway VPN tunnels, Only added a client , exported certificate as per the manual, See the last screen capture below.
You will also note if you view the screen captures that my cousins RVS4000 has not been upgraded to the new code.Is there a reason for that...not really...he's just a user, not really technical. Also note I have not added any VPN tunnels on my RVS4000.
I have a reasonably reliable connection between the USA and Australia. I didn;t have to play with any other options, just add users to the VPN client database.
Your description of the working environment of your PC is missing details on the version of XP, so i will mention the following taken from the software release notes of the RVS4000 ;
There is a known issue with Windows XP SP2 Firewall.
ICMP packets are always dropped by the firewall when the firewall is enabled.
This issue causes the QuickVPN client to be unable to establish a tunnel with the remote QuickVPN server successfully.
Microsoft has released a patch to fix this issue, which you can get from:
http://support.microsoft.com/kb/889527/en-us
After you install the patch, the issue should be resolved. You can also fix this issue by upgrading Windows XP to SP3.
You cannot plug a PC on the same network as the router for testing, they must be on dissimilar WAN networks for testing purposes.
Your remote PC VPN client will not be allocated a IP address in the RVS4000's network, hosts behind the RVS4000 will still respond to pings, as they direct the responses to their default gateway, the RVS4000.
The thegreenbow VPN client is a distracter at this point costing 50 something EURO for a license, lets try to get the quickVPN client working !
So, if you still wish try the following, firstly make sure your XP has been upgraded to SP3;
1. If you upgraded your router to the new version of code, then reset your router to factory defaults to re-initialize your router, yes start again.
2. Export the VPN client certificate to the directory that contains the VPN client. In my case it is;
"C:\Program Files\Cisco Small Business\QuickVPN Client"
3. add a VPN client account to the router
4. Use port 60443 from the quickVPN client. and try VPNing to the router.
5 hmmm, if the client still fails try disabling IPSec Passthrough on the router for grins and giggles.
If this fails, call the SBSC at the following location for resolution;
http://www.cisco.com/en/US/support/tsd_cisco_small_business_support_center_contacts.html
good luck ...regards Dave

Can VC3 allow us to connect 3 webcams to laptop & then stream to Google+ Hangouts On Air?

Similar Messages

Maybe you are looking for