Can View be used to define Interface for Integrator?

Hi, I tried creating a view on top of header and lines table and registered the view using ad_dd.register_table. When I select this view in Interface definition page, it says 'Invalid Interface Table Name' . Is it possible to create Interface based on view?
Edited by: user12132926 on Mar 21, 2013 4:08 AM

unfortunately no, there procedure creating background the interface columns uses the ALL_TABLES view to generate the columns
regards
Giuseppe

Similar Messages

Using one Message Interface for all mappings

Hi Folks,
I am using a BPM in which i m getting a file from file system which have system ID in it.
I am having three send Synchronous step following that.
What i need is to use the Message interface for file to be used for receiver determination based on system id in case of Synchronous interfaces.
DO i need to include this File msg. interface in each mapping, if i do so will it be possible to send req. and get response for synchronous call.
OR is there any way to to use the file msg. interface for each mapping.
we are on SP17,I also tried Extended mapping but i am having SYNCHRONOUS send steps.
Plz help me out
Sachin

Bhavesh
1. You receiver a file in your BPM . This has a field called SYSTEM ID?
2. On the basis of the System ID field you need to determine the Receiver to which the Synchronous Request message has to be sent?
Sorry for that...because I was confused with jai's ans.. that's why said like that
You are absolutely correct
This is what i want to do.
i can't use switch step here. my BPM looks like this
RecFile->sync send->transformation1->transformation2->sync send2->transformation3->BLOCK
in BLOCK
Sync Send3->transformation4 and so on...
I am using three different Sync ABS Interface for each Sync send steps.
In receiver determination i want to get the data from respective R/3 system based on system ID i.e. logical system in File MI.
Say if it T90CLNT90 then get data from BS_SAPR3_4.6 else from BS_4.7
Sachin
Message was edited by:
Sachin Dhingra

Do I need to Define Interfaces for RFC

Hi,
I am doing RFC to File. I want to get the RFC response to an xml file. If I do using BPM , then 1.Should I define Interfaces for RFC as Abstract Interfaces?
Do I need to create any Interfaces for RFC ?
Should I map RFC request to File or RFC Response to File?.
Regards,
Varun

Hii
https://www.sdn.sap.com/irj/sdn/wiki?path=/display/snippets/abap%2b-%2bsimple%2bprogram%2bto%2bcreate%2bsales%2border%2busing%2bbapi
https://wiki.sdn.sap.com/wiki/display/Snippets/ABAP-Simpleprogramtocreatesalesorderusing+BAPI
RFC to SOAP
****************/Tutorials/XI/RFCtoSOAP/page1.htm
RFC-Webservice
****************/Tutorials/XI/RFC2WebService/Page1.htm

Can Anyone suggest and audio/midi interface for MacBook Logic Express?

Can anyone suggest an audio/midi interface for use with a MacBook and Logic Express? I'm seeing a lot of problems with Tascam devices; does anyone have an interface that actually works well? Two audio inputs and midi i/o would suit my current needs, but more would be fine if it works.
Thanks!

Any of the Pro-Tool Mboxs will work with Logic Express. Kind of an unadvertised feature. But I have an original M-box with very nice Focusrite Preamps that works like a charm. No midi though.. some of the newer M-boxes have them.
Also, I have a Presonus Firebox and I know they make some smaller interfaces. No problems working with those.
M-audio Makes some great interfaces too. Their Fast Track pro would probably have everything you need for under $200.

I buy adobe creative suite for teachers and students about one year ago but now i'm not longer a student. Can I still use this programs legally for commercial purposes or do I have to buy some upgrades or something like this? Please help

I buy adobe creative suite for teachers and students about one year ago but now i'm not longer a student. Can I still use this programs legally for commercial purposes or do I have to buy some upgrades or something like this? Please help

The license did not have use restrictions Licenses and terms of use | Adobe
BUT... when your one year Education account ends, I do not think you will be able to renew at the Education rate

I have 2 itunes accounts. I can no longer use my first one for purchases so I had to start a new one and it will not sync from my new one without deleting everything on my same ipod from my previous account. How do I sync between both accounts?

I have 2 itunes accounts. I can no longer use my first one for purchases so I had to start a new one and it will not sync from my new one without deleting everything on my same ipod from my previous account. How do I sync between both accounts?

Wayland wrote:
The CS.com service account has long been closed. I cannot get it to respond to my years ago password for that account. So I ask them to send me a new password and of course it goes to my years ago email number.
Don't have it send email.
Answer the security questions.

Can I only use the itunes ID for the music and my other id for my computer and Iphone

Can I just use one Itunes id for Match and another Id for my apps on my phone and my Mac?

If I'm understanding your question correctly, no. iTunes Match is tied to an Apple ID and regional store. Once you sign into an Apple ID on a device and use iTunes Match it is not possible to switch between Apple IDs for 90 days. You will not be able to regularly update your apps.

Can I easily use a Dell monitir for my MacBook?

Can I easily use a Dell monitor for my MacBook?

Couple thoughts:
1. ALWAYS put the drive in that fits the way it's suppose to. not a good thing to put one in that doesn't fit right as it can cause issues with ejecting disc or damage other parts.
2. the +R stuff seems to hold up better than the -R. I only use +R discs now, I've seen a few -Rs fail after time & have spoken to PC people that had the same thing.
OWC sells the drive that fits your machine & burns everything CD & DVD wise. http://eshop.macsales.com/shop/superdrive/MacBookPro17

Can Flash be used as the GUI for an application

Can Flash be used as the GUI for an application (desktop software, not web based) written for the .NET framework? I want to author an application that would be perfect for flash as a the GUI, but it would need to be able to support a pretty full API for Flash and the wrapper application, written in c#, as they would be passing a lot of data between eachother, as well as getting and sending data over the web. So, can Flash be used in .NET? What kind of API does it have? Or am I stuck with the Windows look/feek thanks,

i'm no expert on this, but read up on Adobe Air. In the most basic terms it allows you to create flash apps that can be deployed on the desktop and will run mac/windows.
this article here might address your exact query:
http://ajaxian.com/archives/commandproxy-integrating-air-and-net

Can iCloud be used as a backup for iBank data?

can iCloud be used as a backup for iBank data?

iBank isn't compatible with iCloud, but developers could add it to the Mac App Store version soon

When we use jsf can we also use hibernate or ejb for database visting.

when we use jsf can we also use hibernate or ejb for database visting.

http://blog.exadel.com/?p=8
http://java.sys-con.com/read/46977.htm
http://www.javaworld.com/javaworld/jw-07-2004/jw-0719-jsf.html
http://www.jroller.com/page/ksevindik/?anchor=lookup_tables_with_hibernate_and
Sergey : http://jsfTutorials.net

Anyone, can icloud be used only on computer for storage, etc., without having a device with ios 5?

Anyone, can icloud be used only on computer for storage, etc., without having a device with ios 5?

Apple iCloud Related Support/How-To/Troubleshooting Docs:
Apple IDs and iCloud
iCloud: iCloud security and privacy overview
MobileMe: About moving to iCloud
Frequently asked questions about the MobileMe transition and iCloud
iCloud: Troubleshooting the move from MobileMe to iCloud
iCloud: MobileMe services that no longer sync after moving to iCloud
iCloud: Supported system requirements
iCloud: What if my device or computer doesn't meet iCloud system requirements?
Creating an iCloud account: Frequently Asked Questions
iCloud: Managing your iCloud storage
iCloud: Purchasing iCloud Storage and Billing
iCloud: Resetting your Photo Stream
iCloud: Calendar & reminder data removed from iCal when disabling iCloud Calendar
MobileMe: Advanced iCal troubleshooting for MobileMe Calendar data
iCloud: What version of Windows software am I using for iCloud?

How to use Variable in interface for Mapping in ODI 11g

Hi,
I want to use Variable 'Year' in interface mapping. how i can do that? I define a variable YEAR1 = '2001' and in interface i put #YEAR1 but it didn't work for me. is there any other way?
Example.
I m using 'Year' column in mapping and it is having different 3 constant values so i was think to define 3 variable Year1= '2001' & Year2= '2005' & Year3= '2010'.
In interface i just want to put variable name insted giving fix value.
regards
Sher

Thank u
I m trying with all the options & when i create Variable i and set Default value to ''2001'
'#YEAR'
#YEAR
'#PROJECT_NAME.YEAR'
#PROJECT_NAM.YEAR
#PROJECT_NAME.'YEAR'
and setting to Stagging Area
But still it is not working out.
I m suing ODI11.1.1.3
is it any issue?

How to modify & use Printer Defination files for Character Mode Report

How can use & modify printer defination files for changing formats & orientation in character mode report. I donot know how to use printer defination files I tried to set the system parameter (Desformat) but it doesn't work.

I m also faced same problem that u face,
If u want to make character mode report so plz follow these instructions:
1. Set the properties of Report Name Node in Character Cell is Yes.
2. Change the mode of the System Parameter Mode is Character.
3. Goto the Layout---> Main Section Properties and set the Character Report Width and Height like 132 and 66
4. Create Formula Column and write this code "RETURN(CHR(14));"
5. Goto Layout Model and map this formula column into Header of the Body Like If ur Company Name is "ABC COMPANY" attached with field and map Formula Column.
5. Goto Printer Definition File DFLT.prt open in NotePad and set width and hieght that u set in Main Section of Report.
6. At Last u Run the Report with Some System Parameter or User Parameter and View as Character Mode Report.
In My Case I used EPSON LQ2180 Printer
So, U Ask More Qustion and u have more knowledge About character mode report Plz Mail me at this address.
Shahid Shafi
[email protected]

How to use pre-defined scenarios for RosettaNet with XI 3.0

Hi all.
 I am working in Comgroup Shanghai co. ltd. which is partner of SAP China.
 We have a potential customer who use RosettaNet as their Supply Chain EDI system.
 I would like to make a demo for demostrate the pre-defined scenarios for RosettaNet RNIF 2.0 packages.
 Where can I find such guideline ? I have checked the article: implementing RosettaNet with XI 3.0, but it cannot help me.
 Another question is how I can develop my own scenarios for the RNIF standards which are not included in XI RosettaNet business package ?

Hi Andy,
See the instructions below after you installed the RosettaNet STK.
Below given is the sample config for PIP3B2 Scenario. Part I is using STK and Part II is using 2 XI systems.
Part I. Test Using STK
In your XI ID:
1) Define both the parties 1) Shipper(Your Partner) 2) Receiver(Your company) with identifiers like DUNS Number.
2) In ID goto>Tools>Transfer Integration Scenarios from IR-->select the scenario "PIP3B2_Receiver" from the drop down list.
3) Follow the 4 steps in the config wizard.
4) While creating your CC, create it from the channel template delivered with the RosettaNet BP.
 4.1) Specify the URL for STK which should be in the following format
http://<STK Server>:<port>/rosettanet/servlet/listenerServlet?userId=<Party Name>
 4.2)In the location fields, enter your location and your partner location.
In your STK
1) Start the RosettaNet STK.
2) enter the UserID<Partner Name in XI>
3) Select the Test Scenario, 3B2V01.01-AdvanceShipmentNotification-0001-Scenario-Shipper
4) Enter Global Business ID(DUNS Number) and Location ID for both the partners. These fields should be same as in your R/3 Party configuration.
5) Enter the URL as follows:
http://<XI Server:<J2EE_Port>/MessagingSystem/receive/RNIFAdapter/RNIF
If everything is configured correctly as mentioned, you should be able to test your single-action scenario.
Part II Test using another XI System
For these follow the steps above for XI Config.
Configure one XI System as PIP3B2 Shipper using the Scenario "PIP3B2_Shipper" and config wizard as mentioned above.
Configure the other XI as PIP3B2 Receiver using the scenario "PIP3B2_Receiver" and config wizard.
In the Url field, specify the URL as follows:
http://<XI host>:<J2EE_Port>/MessagingSystem/receive/RNIFAdapter/RNIF
Hope this helps.
Regards,
Sam Raju

Can View be used to define Interface for Integrator?

Similar Messages

Maybe you are looking for