Can view net camera with E-63

Dear all,
again i am putting the isue , I would like to see net camera and access Pc on remote whot should do with E63,
vkt
I have Nokia E63 and connected internet through WLAN.
I have two problem
1) I m able to open the sites,when i connect a wab comera which is on the same connection, it shows net viewer but no vedio shows. what file or setting require to do to see the web vedio.
2) I want to take remove PC on mobile or it possible if yes what require to do?
regards
vkt

For the white screen try:
- A reset;
Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Connect to your computer and try to restore via iTunes
- If still white screen. let the battery fully drain. After charging for an hour try the above again.
If still problem then it appears you have a hardware problem and an appointment at the Genius Bar of an Apple store is in order.

Similar Messages

How can I USB camera with Excite AX-15?

I want to use the USB micro-scope camera( http://www.dino-lite.com/products_list_minute.php?product_number_abridge=AM7013MT ) with my Excite AX-15. Can I use a UVC standard camera with my pad?

What phone do you have, and what ROM (the factory default or a homebrew one)? Is your phone rooted? And what setup are you using for network management on your computer?
Using the stock HTC ROMs (1.5 as well as 2.1), my HTC Hero shows up as a USB modem in NetworkManager when USB teethering is enabled on the phone (the same should be the case with other Android phones from HTC with the Sense UI). I'm not sure how it works with other setups, such as WICD, but with NetworkManager it 'just works'.
As far as I know, the same should be the case when the native USB teethering in Android 2.2 is activated. However, not all 2.2 ROMs support the feature, even though the menu option is present -- e.g. the FroydVillain ROM I'm currently using (the same goes for some 2.1 ROMS, such as VanillaEclair pre version 5.0, where the menu option was present but in effect did nothing). If that is the case, you can try the Android Wired Teether app -- or, if that does not work, Azilink to share your phone's internet connection through VPN.
The azilink soultion is more or less bound to work no matter what, but it takes some effort to set up (i.e. getting ADB running and configuring OpenVPN). There's a quite informative thread on it in the Ubuntu Forums

View iPhone camera with iPod

I would like an app so I can link my iPod touch to my iPhone and use it to control my camera. Hold iPhone in one hand aim it and use the iPod to viwe what the camera sees and make it take a picture.

For the white screen try:
- A reset;
Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Connect to your computer and try to restore via iTunes
- If still white screen. let the battery fully drain. After charging for an hour try the above again.
If still problem then it appears you have a hardware problem and an appointment at the Genius Bar of an Apple store is in order.

How to install my WVC210 Wireless-G PTZ Internet Camera so I can view it from any where in the world.

Hi guys I just bught a
WVC210 Wireless-G PTZ Internet Camera
I need to install it so that I can view it from any where in the world. I have no Idea how to do this.
I would like if some one can send me a video tutorial on how to do it.
I have a website that I am runing so I guess I can use that if I need something like Hosting and Domain things.
I want to know if it is posible that I can some how configure it so I can view the camera on one of my websites page.
For exaple: www.example.com/mycamera???
If not well I would love to here the options I have.
Thank you very much in advance!

Rogerio,
I have never seen a router like you have and I wouldn't dare advise you about changing the settings. It appears that it is a router/modem that was provided by your ISP. If this is the case, I recommend that you call your ISP and ask them for Port Forwarding assistance. You need to forward port 80 to the LAN IP address of your camera. The LAN IP address of your camera is the IP address that you use to log into the web interface. You should not need to change any settings on the camera. After you have had the ISP help you forward the port to the camera, go to ipchicken.com and you will see your WAN IP address. Write that address down and then go to a remote location and type it into your web browser. You should get the login page of the camera. Note that your WAN IP is subject to change. You can ask your ISP to provide you with a static IP address which will be an additional charge each month but your IP address will not change. Another option is to use a service such as dyndns to create a unique URL that you can use to access the camera remotely even if your WAN IP address changes. We can discuss that after you get access to the camera if you have further questions.

LCD live viewing & copy work with EOS 70D (W)

Hi,
Can anyone please provide insight, guidance, solutions to accomplish this efficiently?
Goal/operation:
I want to use the camera for copy work: portfolio, flat art, photos, objects etc. I have old family photo albums I want to copy/photograph each image separately without removing/disturbing/damaging the images in the books.
The camera is mounted on a vertical copy stand shooting down (subject is mainly flat art).
I want to be able to view through the LCD in live view (camera is 90º facing down at copy board), have manual control, set up & align the subject and shoot the photos using the flash lighting system in quick efficient production process.
Equipment used:
Camera EOS 70D (W)
Minolta Copy stand
Novatron 240 portable light system, 2 lights with polarized sheet film
synch connections:
wireless - Pocket Wizard Plus 2 Transceiver.
wired - Nikon AS-15 Hot shot cord adapter
PROBLEM
I am having issues being able to view through the LCD, set up & align the subject and shoot the photos - without jumping through hoops.
It seems I have to switch to Av from M after shutter release to view subject in LCD, then switch back to M for the next shot, camera fails to shoot and shows error message: “Press start/stop button to activate movie shooting”. This doesn’t make sense as I’m not movie shooting.
If I change the mode to “Flash off” and back to “M” then it appears to work, however once I switch to Av mode to view the subject again, it starts the process all over.
There must be a better/easier way.
Could this be a potential bug in the camera? or am I missing something? I don’t see solutions in manual.
Will mode setting “C” Custom allow “Live viewing” w/ custom “Manual control” to bypass the need to use “M” manual setting that wont allow LCD viewing?
Camera settings:
Shooting with LCD (live view shooting)
mode setting:
Av - for live viewing and setup of subject
Then switch to M - Manual for manual control and shutter release
Also - I would like to connect to Apple Mac Laptop computer, live view on screen, and if possible have the option to record the photos direct to computer hard disk. Can this be done with this camera? IF so, what is needed?
Best regards,
J

-Canon 70D have built-in Wifi, so you can connect your camera with your computer wirelessly for tethered shooting. I have PC so the instruction may be different, but you need to install Canon EOS Utility.
-You can do everything in M mode even Live View. I think you are doing something wrong here, you may need to re-read your manual regarding this problem.
-C mode is customized M mode, so you can do everything in C mode also. With C mode, you can save all the setting so you can come back later. It's a great use in your case where you can make your C mode has all the settings for your work, then when you take the camera out to shoot something else, use other mode. Later, when you come back, just switch back to C so you don't have to change anything.
Weekend Travelers Blog | Eastern Sierra Fall Color Guide

Can view attachments but can't forward them

*Pls advise me how can I forward my emails with attachments.I can view my mails with attachments but when I forward them, my friends only receive most of mails w/o attachments.I am using Iphone4 IOS 4.I have tried my hotmail,gmail & yahoo accounts but facing same problem.*

I've never done it so all I can do is see what the User Guide says:
Forward a message Open a message and tap , then tap Forward.
Add one or more email addresses, type your
message, then tap Send.
When you forward a message, you can include the
files or images attached to the original message.
IF I'm reading this right, it looks like forwarding attachments is an optional action, not a default. Let me try it.
OK, it worked for me on my iPad. On my iMac I created a message with an attachment in my ISP account and sent it to an AOL account. I then read the message on my iPad after which I forwarded it to my Moble Me account. I then used my iMac to log into MobileMe and the message was there with the attachment.
Here are the steps I took on my iPad: After tapping on the forwarding icon, a drop down appeared asking me if I wanted to include the attachment. I said yes and then sent off the message. Is that what you did? My iPad has iOS 4.2.1 on it.

I can't use camera on nokia 701 after updates bell...

Just like this!
How to fix?
http://www.youtube.com/watch?v=Q4qrC7JPCPk

@Areefza
Unfortunately several devices affected since Belle FP2, although upon my 808 I can still use camera with Camera Pro or Silent Film Director for Video ironically.
Happy to have helped forum with a Support Ratio = 42.5

Macbook pro fails to read sd card with movies recorded on it, any ideas? I can view them in the video camera so know they are there somewhere. I am now thinking I should have formatted or initialised the new card before using it.

My macbook pro is failing to read a new sd card with movies recorded on it. Any ideas please? A previously used SD card has downloaded without problems. I have tried using a card reader as well as downloading from the video camera itself, neither works.
I can view the latest recordings on the video camera so know they are there somewhere. I am now thinking I should have formatted or initialised the new card before using it but didn't think of that at the time. Obviously don't want to do this now as it will wipe the movies.

Hi and Welcome to the Forums!
From everything you've described, you've done everything possible. Hence, I recommend you seek out your warranty support.
Good luck and let us know.
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Unable to view external webcam content. I'm using IE11 with Windows 7 64 bit. I've tried deactivating Activex control, tried different browsers etc, tweeked the tools for trusted sites etc, but am totally stuck. I know the cams are working as i can view

Unable to view external webcam content. I'm using IE11 with Windows 7 64 bit. I've tried deactivating Activex control, tried different browsers etc, tweeked the tools for trusted sites etc, but am totally stuck. I know the cams are working as i can view them on mobile phone via puffin browser. I can play Youtube videos etc just fine. So why not the webcam?

First, confirm that ActiveX Filtering is configured to allow Flash content:
https://forums.adobe.com/thread/867968
Internet Explorer 11 introduces a number of changes both to how the browser identifies itself to remote web servers, and to how it processes JavaScript intended to target behaviors specific to Internet Explorer. Unfortunately, this means that content on some sites will be broken until the content provider changes their site to conform to the new development approach required by modern versions of IE.
You can try to work around these issues by using Compatibility View:
http://windows.microsoft.com/en-us/internet-explorer/use-compatibility-view#ie=ie-11
If that is too inconvenient, using Google Chrome may be a preferable alternative.

When try to view a movie with a external reader it makes a weird noise at time and other times works fine I think I read somewhere theat you can only use thereader that came with your computer

When I put a movie DVD in my external reader it makes a strange noise and at times it gets hung up I have to force quit it and then I can eject the dvd
I believe I read some wherre that you can only use the reader that came with my computer

That sounds like the drive is faulty. CD and DVD will have seperate heads, and burn and read will be different lasers in each. If it's still in warranty I'd exchange it.

Macbook Pro 2.53 mid 2009 came with 60 watt magsafe can I use a 85 watt without issues also can i use the new aluminum tip one?

My macbook came with a 60 watt magsafe charger with the white magnetic tip. It crapped out on me and now need to buy a new one but everyone says it uses a 85 watt which is false since i bought it new and the 60 watt charger came in the sealed box.
1. If I buy the 85 watt will it damage my macbook pro?
2. can I use the new magsafe charger with the new aluminuin tip with my macbook pro?
Look below in red is the proof
15-inch Configurations
Enclosure
Precision aluminum unibody
Processor
2.53GHz Intel Core 2 Duo
2.66GHz Intel Core 2 Duo
2.8GHz Intel Core 2 Duo
L2 cache
3MB shared
3MB shared
6MB shared
System bus
1066MHz
1066MHz
1066MHz
Memory
4GB (two 2GB SO-DIMMs) of 1066MHz DDR3 SDRAM; supports up to 8GB
Hard drive4
250GB Serial ATA; 5400 rpm
320GB Serial ATA; 5400 rpm
500GB Serial ATA; 5400 rpm
Slot-loading optical drive
8x SuperDrive (DVD±R DL/DVD±RW/CD-RW)
Graphics
NVIDIA GeForce 9400M graphics processor with 256MB of DDR3 SDRAM shared with main memory3
NVIDIA GeForce 9600M GT graphics processor; and NVIDIA GeForce 9400M graphics processor with 256MB of DDR3 SDRAM shared with main memory3
Graphics memory
256MB GDDR3
512MB GDDR3
Video
Built-in iSight camera; Mini DisplayPort output port with support for DVI, VGA, and dual-link DVI (requires adapters, sold separately)
Display
15.4-inch (diagonal) LED-backlit glossy widescreen display, 1440-by-900 resolution
Expansion
One FireWire 800 port (up to 800 Mbps), two USB 2.0 ports (up to 480 Mbps), SD card slot
Audio
Built-in stereo speakers, built-in omnidirectional microphone, combined optical digital input/analog line in, combined optical digital output/analog line out
Networking
Built-in 10/100/1000BASE-T (Gigabit) Ethernet
Wireless
Built-in AirPort Extreme Wi-Fi (based on IEEE 802.11n draft specification)2; built-in Bluetooth 2.1 + EDR (Enhanced Data Rate) module
Hardware accessories
60W MagSafe Power Adapter, AC wall plug, power cord
85W MagSafe Power Adapter, AC wall plug, power cord
Limited warranty
and service
Your MacBook Pro comes with 90 days of free telephone support and a one-year limited warranty. Purchase the AppleCare Protection Plan to extend your service and support to three years from your computer’s purchase date. Only the AppleCare Protection Plan provides you with direct telephone support from Apple technical experts and the assurance that repairs will be handled by Apple-authorized technicians using genuine Apple parts. For more information, visit Apple support or call 800-823-2775.
Apple and the global
environment
Learn more about Apple’s dedication to reducing the environmental impact of our products and processes. The Apple Product Environmental Specification details the environmental attributes of our products.
Recycling
Apple takes a holistic view of materials management and waste minimization. Learn more about how to recycle your Mac.

Yes, you can use the 85 watt adaptor. You cannot use the new adaptors because your computer is not equipped with the proper MagSafe connector. But you can use the older MBP adaptors as well as a 60 watt replacement adaptor. All can be found at Apple's Online Store.

1. I have an iPod which has purchases synced with I tunes with an apple ID. I now have an iPad with a new ID for cloud. I have cloud storage capacity of 5gb which came with the iPad. How can I use one ID and store my existing music in cloud?

1. I have an iPod which has purchases synced with I tunes with an apple ID. I now have an iPad with a new ID for cloud. I have cloud storage capacity of 5gb which came with the iPad. How can I use one ID and store my existing music in cloud?

HI Frostyfrog
CHeck out iTunes Match which has an annual fee of £21 or thereabouts. You can store a maximum of 25,000 songs there and they all become available on your other kit, iPhone, iPad and iPod. I know it works as I have over 23000 songs uploaded of which only a few we're bought through iTunes.
it works by comparing your music to the whole iTunes music dadata base so you access the same tunes that you could get from iTunes. If you have obscure stuff, it uploads your own music to the cloud as a copy.
I Find it incredible that on my iPhone with its 16gb memory I can view almost 200 gb of music (ie my 23000 songs) and play any of them. Anything I add to iTunes becomes available via the cloud fairly quickly from a few minutes or a little longer if adding a lot.
The first time you use it it will take quite a while to match your music if you have a lot, but after that it is all automatic. Read the stuff on the apple site. Your PC needs to be at least running Vista. I recommend it and at less than 50p a week it's good value.
Good luck

I purchased some movies off iTunes from my account from my fathers IPad as a gift but didn't realize can not view if not logged with my account. Is there any way to save directly to the IPad (regardless of account)? Or transfer to him so he can view have?

I purchased some movies off iTunes from my account (but from my father IPad) to download as a gift,
but didn't realize he can not view if not logged in with my account.
Is there any way to save directly to the IPad (regardless of account) so he can view?
Or transfer to his account?
Or is any was to cancel the recent purchase if can not transfer as I will not watch these myself?

sure pretty simple. make a backup of your current settings
http://support.apple.com/kb/HT1766?viewlocale=en_US
then restore device from old backup you need pics off of
then import pics to computer
http://support.apple.com/kb/HT4083
you may need to save pics to camera roll first
then restore the new backup and sync pics back to phone via itunes
Peace, Clyde

Do i need to use the phone line that came with the printer to fax paperwork or can I buy a new one?

This question was solved.
View Solution.

Hi Willcarter,
It is all up to you. You can use the phone line which came with the printer or you can get a new one. It does need to be a 2-wire phone line though.
Thanks
Josh.C
Click on the BLUE KUDOS button on the left to say "Thanks"
Although I am an HP employee, I am speaking for myself and not for HP.

Can Not Find Apple Loops files that came with Logic 7

I recently reinstalled my system and upgraded to leopard but am still running Logic 7.
My problem is that all of the apple loops that came with the application are no longer accessable for some reason.
I can view all of the loops in the loop browser, but any time I click on one to preview, it comes up with this error message: "Club Dance Beat 038.caf" - what kind of file is this?" It seems like all of the files are .caf.
When I search my system to try and find the loops, I cant find any loops that seem to go with logic. There are apple loops for garage band and soundtrack pro but not logic.
Can anyone help me in accessing my apple loops for logic? Shouldnt these things just come with the application when I install it? That does not seem to be the case here for whatever reason.
thanks much
Jesse

Jesse C. wrote:
I recently reinstalled my system and upgraded to leopard but am still running Logic 7.
My problem is that all of the apple loops that came with the application are no longer accessable for some reason.
I can view all of the loops in the loop browser, but any time I click on one to preview, it comes up with this error message: "Club Dance Beat 038.caf" - what kind of file is this?" It seems like all of the files are .caf.
When I search my system to try and find the loops, I cant find any loops that seem to go with logic. There are apple loops for garage band and soundtrack pro but not logic.
Can anyone help me in accessing my apple loops for logic? Shouldnt these things just come with the application when I install it? That does not seem to be the case here for whatever reason.
thanks much
Jesse
Your "problem" is that you now own the Garageband Loops, which are in the new .caf format.
Your version of Logic cannot open these files.
These .caf files were introduced with Logic 8. You would do good to upgrade Logic, if you really need to use those files.
Cheers

Can view net camera with E-63

Similar Messages

Maybe you are looking for