Can Visual Composer applications only be created and deployed on EP?

We are working with Visual Composer on our Enterprise Portal box and I like it a lot. However, our company is investigating Microsoft Sharepoint as a possible candidate for Portals. This could mean that we are not going to use EP. I would like to know if it is possible to create and deploy Visual Composer applications if we don't have EP installed.
As VC is dedicated SAP technology I don't think this can work but I want to be be 100 % sure. Maybe there are other ways to run VC in a sharepoint portal that I don't know off?
kr
Angelique Heutinck

Hi Angelique,
You need the SAP Enterprise Portal to run Visual Composer.
In the VC you create pages and iviews that need the enterprise portal services to run.
"... Visual Composer operates on top of the SAP NetWeaver portal, utilizing the portal’s connector-framework interfaces to enable access to a range of data services, including SAP and third-party enterprise systems. In addition to accessing mySAP ERP systems, users can access SAP Business Warehouse and any open/JDBC stored procedures..."
http://help.sap.com/erp2005_ehp_03/helpdata/EN/42/ef8270370a1bcae10000000a11466f/frameset.htm
Best regards,
José

Similar Messages

  • How to deploy Visual composer applications and set up the server

    Hi ,
    I have SAP Netweaver developer studio client installed on my Laptop and I can use it to create VC applications but I cannot visualise the applications since I don't have server.
    Is there a server that  I can install and configure? and what else do I need before I can successfully deploy visual composer applications.
    thanks

    Hi Bhat,
    Please ping server whether it is reachable or not.
    Please enter IP and host name in the host file (Start>>Drivers>>etc>>host file)
    Then enter host and instance number in NWDS. then open server view through open perspective, it will show you whether server is up or not.
    Hope this will helps you.
    Regards
    Arun

  • How can I integrate Visual Composer applications with enterprise portal

    Hello All,
    I have a requirement to show BI reports built from webapplicaoins and Visual Composer to present on the Enterprise Portal 7.0
    Can anybody suggest me the procedure to do the same.
    Thanks

    Hi Agarwal
    When you create and deploy a VC application, the deployed iView/s are automatically created in the portal under the folder that you have specified (in VC Tools> Compiler options>portal deployment), or by default under Content Administration>Portal Content>Visual Composer folder.
    Check this for your BI, VC and Portal requirement:
    <a href="https://www.sdn.sap.comhttp://www.sdn.sap.comhttp://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/ad182ac7-0a01-0010-4fb8-8a4d217b19c1">https://www.sdn.sap.comhttp://www.sdn.sap.comhttp://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/ad182ac7-0a01-0010-4fb8-8a4d217b19c1</a>
    You can then use these iViews with your role, page, etc.
    Manoj

  • Can Visual Composer talk to/connect to any database?..

    Hi ,
    My first question is if Visual Composer can talk to a database directly?
    I would like to know the all the databases which visual composer can connect to?
    Does it connect only to SAP Backend systems?
    Or can it connect to Any Database like SQL server etc.,?
    If so, how can visual composer be configured to any database?...
    Please help!
    Thanks,
    Vaishali.

    Hi Vaishali,
    It can talk to Any SAP Data base or Java or Oracle data base through portal.
    First you have to confihure all your backends in Your portal and Connect them to Your VC User through Usermapping.
    So all Backends will appear in VC There by you can use the for your application in your portal.
    If helpful award points
    Regards,
    Govindu

  • Free Visual Composer session for BPM Users (and win an iPod!)

    Hello to all BPM fans and users!
    We would like to invite you to a free online session that focuses on creating UIs for your human tasks in BPM, using Visual Composer ! Forget all these Web Dynpro APIs and focus on what's really important - your user. With Visual Composer, you can seamlessly create UIs that use data coming from the BPM process and send data from the task to the process.
    You can integrate a variety of UI elements and manipulate data inside the Visual Composer model, insert Flex elements, and also add Web Dynpro components and UI if you realize that something is still missing.
    The first of several online sessions will take place on Thursday 3/6/2010 13:00 GMT+2 and you're all invited. Attend the session for a chance to win an iPod !
    Weu2019ll have more of these sessions, focusing on other more advanced topics of Visual Composer. To receive the session connection data, please send us an email to visualcomposer @ sap.com and tell us a bit about yourself: your role in your company, the kind of projects you usually do, and the level of knowledge and experience you have with Visual Composer (if any).

    Hello to all BPM fans and users!
    We would like to invite you to a free online session that focuses on creating UIs for your human tasks in BPM, using Visual Composer ! Forget all these Web Dynpro APIs and focus on what's really important - your user. With Visual Composer, you can seamlessly create UIs that use data coming from the BPM process and send data from the task to the process.
    You can integrate a variety of UI elements and manipulate data inside the Visual Composer model, insert Flex elements, and also add Web Dynpro components and UI if you realize that something is still missing.
    The first of several online sessions will take place on Thursday 3/6/2010 13:00 GMT+2 and you're all invited. Attend the session for a chance to win an iPod !
    Weu2019ll have more of these sessions, focusing on other more advanced topics of Visual Composer. To receive the session connection data, please send us an email to visualcomposer @ sap.com and tell us a bit about yourself: your role in your company, the kind of projects you usually do, and the level of knowledge and experience you have with Visual Composer (if any).

  • Where to get the par file for visual composer application?

    Hi Gurus,
    I have referred few forum postings about transporting VC iview .
    to do that first we have to deploy the par file of the Visual composer application into the target system(QA & Prod) where ever we want to import it........
    Now my query is I went to System admin->support-Portal runtime->Root Folder-->Portal apps........
    where i have seen my Visual composer application name and otpion to download when I downloeded it it has downloded in unknown format............can i deploy this to SDM of the target system?
    Or I need to change the file format into par or par.bak file?
    please tell me how to go about it.........
    higher points will be rewarded for the useful inputs.......
    Thanks in Advance,
    Dharani

    Hi Dharani,
    Tools --> Options --> Compiler --> Check box deploy for par and mention the namespace and vendorname in the PAR prefix name
    Very similar to how its done in NWDS.
    Cheers,
    Rahul.

  • Can Visual composer be used for editing ESS

    hi friends:
                can we use Visual composer to edit ESS ?
    thank you very much

    Hi Jingying,
    SAP Standard ESS/MSS component are available in ITS and Web Dynpro Based. ESS/MSS component are not based on visual composer applications..
    But you have developed custom ESS/MSS applications in visual composer as per client requirement and integrated in the ESS/MSS component. Then you can use visual composer to modify visual composer applciations.
    Hope it helps
    Regards
    Arun

  • Default Value in Numeric Input Field in Visual Composer Application

    Hi All,
    I have developed a visual composer application which has a numeric input field for Hours.
    It is mapped to a backend module.
    We are using portal 7.31
    The problem is that the deafult value of this input field is "0", but the rquirement is to display as "0.0"
    The functionality has been tested with input values in decimals and works fine. The problem is when the screen first populates, that field should show "0.0" .
    Please advise.
    Thanks

    Hi Soumya Chanda,
    I don't know of an agreeable way around it. You could have a textual input, but then it doesn't have the numeric control behavior, plus you need to handle incorrect typing (alphanumeric notes).
    Sorry!

  • Creative Cloud membership (one-year) .. I Can use the application on my Computer and Laptop

    Creative Cloud membership (one-year) .. I Can use the application on my Computer and Laptop

    Cloud License allows 2 activations http://www.adobe.com/legal/licenses-terms.html
    -Install on a 2nd computer http://forums.adobe.com/thread/1452292?tstart=0
    -Windows or Mac does not matter... 2 on the same operating system, or 1 on each
    -Both computer Cloud subscriptions may not be in use at the same time

  • After full charge i can use my macbook only for 2hrs and after 20 min my battery percentage decrease from 100% to 87% and it will happend every 20 min .. pls help me

    after full charge i can use my macbook only for 2hrs and after 20 min my battery percentage decrease from 100% to 87% and it will happend every 20 min .. pls help me

    Hi,
    How old is your MBP? how many cycle batter do have ?
    I will also recomend to use the software http://www.macupdate.com/app/mac/24141/battery-health-monitor
    to monitor battery life.
    You should be able to read everything from the software.
    Please post results.
    Regards,
    Mirek

  • How can I delete albums that I created and imported photos into on my iPhone4

    How can I delete albums that I created and imported photos into on my iPhone4

    If you synced the Photos from your computer to your phone, you have to unsync the pictures via iTunes.
    Summary Pane > Photos > Uncheck "Sync Photos from ..."

  • How to create and deploy a simple jstl applicaton in weblogic 10.3.3

    How to create and deploy a simple jstl applicaton in weblogic 10.3.3

    1) Since JSTL libraries are provided as Web application libraries, they must be deployed before the Web application that is using JSTL functionality is deployed. The libraries can be deployed using the Administration Console or with the command-line weblogic.Deployer tool.
    Here’s an example of deploying a JSTL 1.2 library using the weblogic.Deployer command-line:
    java weblogic.Deployer -adminurl t3://localhost:7001
    -user weblogic -password weblogic
    -deploy -library
    d:/beahome/wlserver_10.3/common/deployable-libraries/jstl-1.2.war
    This command deploys the JSTL 1.2 library using the default library-name, specification-version and implementation-version defined by the MANIFEST.MF in the library.
    After a library is deployed, the extension-name, specification-version and implementation-version of the library can be found in Administration console. This information can also be found in the MANIFEST.MF file of the library WAR file.
    For more information on deploying a Web module refer below URL
    http://docs.oracle.com/cd/E15051_01/wls/docs103/deployment/deployunits.html
    2) To reference a JSF or JSTL library, a standard web application can define a <library-ref> descriptor in the application’s weblogic.xml file. Here is an example:
    <library-ref>
    <library-name>jsf</library-name>
    <specification-version>1.2</specification-version>
    <implementation-version>1.2.0</implementation-version>
    <exact-match>false</exact-match>
    </library-ref>
    For more information on referencing a Web application library refer below URL
    http://docs.oracle.com/cd/E15051_01/wls/docs103/programming/libraries.html
    3) Create a sample JSP in your application and JSP should look as shown below
    <%@ taglib prefix="c" uri="http://java.sun.com/jstl/core" %>
    <html>
    <head>
    <title>TestJSTL</title>
    </head>
    <body>
    <c:set var="topic" value="JSTL" />     
    <c:out value="${topic}" />
    </body>
    </html>
    4) Create WAR and deploy and test.
    Edited by: Murali Veligeti on Jul 26, 2012 9:00 AM

  • Create and deploy sda file in NWDS 7.0

    Hi,
    Could u pls tel me how to import , create and deploy sda file.
    I hav got an .sda file, i need to import ,made changes to that nd deploy it again in NWDS 7.0
    help me by providing some links or turorials...
    thanks
    raji

    Hi,
    As i told you earlier, there is no option to import a .sda file in NWDS 7.0.
    So you have to follow the approach which i mentioned in your earlier thread.
    https://www.sdn.sap.com/irj/scn/profile?userid=3978830
    That is the only way which you can do.
    Regards,
    Saleem

  • Creating and deploying ejb 3.0 session bean with annotated pojo

    I try to create and deploy a EJB 3.0 stateless session bean (and associated webservice) with the following steps:
    1) Create Interface "Repository"
    package de.xxx.config;
    import java.rmi.Remote;
    import java.rmi.RemoteException;
    import javax.jws.WebMethod;
    import javax.jws.WebService;
    @WebService
    public interface Repository extends Remote {
         @WebMethod(operationName = "findCampaignByChannel")
         public String findCampaignByChannel(String channelName) throws RemoteException;
    2) create dummy "RepositoryImpl"
    package de.xxx.config;
    import java.rmi.RemoteException;
    import javax.ejb.Stateless;
    import javax.jws.WebService;
    @WebService(endpointInterface="de.xxx.config.Repository")
    @Stateless
    public class RepositoryImpl implements Repository {
         public String findCampaignByChannel(String channelName) throws RemoteException {
              return null;
    3) The two class files are packaged into a jar without any further descriptors
    4) The jar is deployed with admin_client into the oc4j instance using the commands:
    -deploy -file <jarfile> -deploymentName <name>
    Result:
    An ear was constructed and started but no session bean or webservice is found (using the console). But according to to the docs a jar file without a ejb-jar.xml should be recognized as a EJB 3.0 ejb-jar file and the necessary steps to create session bean and expose webservice should be done automatically.
    My question:
    Which step do i miss here ?
    Tools used:
    Eclipse 3.2 for the jar file
    SoaSuite 10.1.3.1 for oc4j

    another strange problem.
    i have an APplication server added ( JBOSS ).
    when i create deployment profile (EAR ) application server is showed in the ComboBox .
    But when i create Java Test Client for some EJB and when i check " Connect Remote Application server" there is 2 comboboxes
    J2EE Application
    App Server Connection.
    first combo is ok there is EJB applicaiton
    Secound is empty .. but i Have App Server.
    Another think is that when i create EJB 3.0 its BAD to see J2EE app it must be J EE 5 app or just Java EE app

  • DynPro application compiled under SP14 and deployed to SP11 Portal

    Hello,
    I have accidently compiled and deployed a DynPro application on NWDS client with SP14 to NW Portal with SP11. Now I receive an exception:
    java.lang.NoClassDefFoundError: com/sap/tc/webdynpro/progmodel/api/IWDEventHandlerId
    Is there any way to retreive this jar from the SP11 server and recompile the application with it?

    HI Roy,
    You question is confusing. In heading you said that "DynPro application compiled under SP14 and deployed to SP11 Portal" and in message you said "application on NWDS client with SP11 to NW Portal with SP11".
    If you have compiled application with SP11 then it should be ok. But, if you have compiled with SP14 then it surely gives such error.
    You can open your dynpro application in NWDS SP11 and then rebuild it and deploy on the WAS SP11. It will work.
    Regards,
    Bhavik

Maybe you are looking for