Can volume slider be locked in place?

I do an Internet radio show and play songs directly from iTunes.  We strive to have all DJs play their music at the same volume.  The volume slider in the iTunes window does not have a number scale on it, and moves when I accidentally move the cursor in that area.   Without a number scale to revert to, is there any way to lock the slider in place to retain my optimum volume setting?
Thanks.

like i say you need to change the MTU on the router to 1400.
Got the setup page 192.168.0.1 and then on the left you will see "Advanced" under that you will see "wan setup" click on it, now you should see "MTU size(in bytes) the number there should be 1500 change this to 1400 and then click apply now you should be ok.
Tony in Paddington, London on UKonline22(11Mb down 756up).
Hore this helps.

Similar Messages

  • How to fix my volume slider so i can see it on the screen

    I have a dv6-1355dx and i had to restore it to the factory settings and ever since then when i try my volume slider it works still i just dont see it on the screen anymore any one that knows what this could be would help me out alot

    Welcome to the HP Forum!
    bpc4587 wrote:
    I have a dv6-1355dx and i had to restore it to the factory settings and ever since then when i try my volume slider it works still i just dont see it on the screen anymore any one that knows what this could be would help me out alot
    What is the installed operating system and version (32-bit or 64-bit)?
    Do you mean the volume slider from the taskbar or the one from the audio software/
    The audio driver can be found on the driver and software download section of the web support portal for your notebook.  This is the page you seek. Use the dropdown to select the correct version of the installed operating system for your notebook. Right-click Computer and select properties to see which version is installed in your notebook.
    Kind regards,
    erico
    ****Please click on Accept As Solution if a suggestion solves your problem. It helps others facing the same problem to find a solution easily****
    2015 Microsoft MVP - Windows Experience Consumer

  • I have an I phone 4 and since I upgrade to the lastest ios  6.1.3 , my volume slider is missing. The sound works when but I can't mute or turn up or turn down the volume. I've tried a hard reset , reboot, blowing air in the dock and earrplug jack. :-(

    I tried almost evrything to restore my volume slider( + & - ). My phone rings, plays music and every other sound but I can't mute or put  the volume up r down with the side buttons.. My volume slider bar is missing. This is only simce I upgraded to iso 6.1.3 .. What's with that?? I figured out how to manually  mute the phone through (General, Accessibitily) by muting the bell for sound and unmuting the bell for silent mode. But what a freaken pain, when you have to take all those extra steps to turn your volume up or down or  mute your Iphone??
    We have no Apple Store here so no luck to bring it in to get looked at.. Please , does anyone out there know what else I coold do???
    Cheers

    Does it work with headphones plugged in?  That is typically the culprit, the device mistakenly believes that a pair of headphones are plugged in.

  • I can't get the volume to work when I watch a you tube video, there's no volume slide under the play button, and my volume control on my I pad won't do anything either, but the volume of all my alarms and sounds works perfect, what can I do??

    I can't get the volume to work when I watch a you tube video, there's no volume slide under the play button and my volume control on my I pad don't do anything to help, but yet my volume works perfect on everything else, what can I do???

    do u have your ipad doing airplay because that could happen

  • My iPad is locked and I can't slide to unlock it.

    Hello,
    My Ipad has been locked, i can't slide to unlock, any solution...please.

    IPhone, iPad, iPod touch: Wrong passcode results in red disabled screen
    Please Get the iPad User Manual for iOS 5

  • When I lock my screen I can't slide it to unlock I can unlock by the finger print but once on home screen I can swip or press any apps

    When I lock my screen I can't slide it to unlock I can unlock by the finger print but once on home screen I can swip or press any apps

    Try holding the Power and Home button until the phone powers off and the Apple logo appears
    No data will be lost

  • HT201412 My husbands new ipad is frozen. We can't slide to unlock or turn it off. In the center of the screen is a pop up block that says "This ipad has not been backed up. Backups happen when this ipadis plugged in, locked, and connected to Wifi." What c

    My husband's new ipad is frozen. We can not slide to unlock or turn it off. A pop-up appears in center of screen that says "this ipad has not been backed up. Backups happen when this ipad is plugged in, locked, and connected to the internet." Can someone tell us what to do. Holding the power buttons down did no good.
    Thank you

    Frozen or unresponsive iPad
    Resolve these most common issues:
        •    Display remains black or blank
        •    Touch screen not responding
        •    Application unexpectedly closes or freezes
    http://www.apple.com/support/ipad/assistant/ipad/
    iPad Frozen? How to Force Quit an App, Reset or Restart Your iPad
    http://ipadacademy.com/2010/11/ipad-frozen-how-to-force-quit-an-app-reset-or-res tart-your-ipad
    What to Do When Your iPad Won't Turn On
    http://ipad.about.com/od/iPad_Troubleshooting/ss/What-To-Do-When-Your-Ipad-Wo-No t-Turn-On.htm
    iOS: Not responding or does not turn on
    http://support.apple.com/kb/TS3281
    iPad: Basic troubleshooting
    http://support.apple.com/kb/TS3274
     Cheers, Tom

  • Tabbed windows float in space, can they lock in place?

    This seems new to me. In CS5, you could have mulitple images open in tabs, and there would be no additioanal padding around the canvas area; the image would lock in place to the upper left.
    Now in tabs in CS6, the canvas floats in space. Any way to have tabs and get rid of the space/padding?

    What operating system?
    Usually in the standard screen mode using tabs, the image needs to be zoomed slightly bigger than the image window to be able to over scroll on windows systems.
    I haven't really noticed a difference in behaviour between cs5 and cs6 in this regard on windows.
    Added: I can see from your other posts that your on a mac?
    Message was edited by: R_Kelly

  • I just received a iPod Touch 5th generation for xmas and it acts like it is locked, when you slide the slider it says unlock button and nothing happens.  Can't slide the power off either.  It tells you the time, unlock button, power off button but nothing

    I just received a iPod Touch 5th generation for xmas and it acts like it is locked, when you slide the slider it says unlock button and nothing happens.  Can't slide the power off either.  It tells you the time, unlock button, power off button but nothing happens.  Voice just tells you the unlock button, time, poweroff button.
    Please help also itunes says I need to enter on iPod the passcode to reset to factory.  I can't get it open to enter passcode, slider doesn't work.  It is one day old and this happen xmas afternoon.  PLEASE Help someone

    Try:
    - iOS: Not responding or does not turn on
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - Try on another computer                            
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
    Apple Retail Store - Genius Bar                                     

  • I have iphone 4s 32GB ,the volume of the ringer and alerts can't be adjusted using the volume buttons and lock sounds and keyboard clicks available, but all not appear ??!!!!!!!

    I have iphone 4s 32GB ,the volume of the ringer and alerts can't be adjusted using the volume buttons and lock sounds and keyboard clicks available, but all not appear ??!!!!!!!

    Hi nitramred,
    To start troubleshooting this issue where you are unable to adjust the volume after receiving a call, please go ahead and first force close all of the apps currently running on the device, and then reset it by following the steps in the articles below.
    iOS: Force an app to close
    Turn your iOS device off and on (restart) and reset
    Take care,
    Alex H.

  • My nephews iPad Mini is stuck on the lock screen. It's frozen and you can't slide the unlock bar. I tried rebooting it and it didn't work. What can I do to fix it?

    My nephews iPad Mini is stuck on the lock screen. It's frozen and you can't slide the unlock bar. I tried rebooting it and it didn't work. What can I do to fix it?

    How can I unlock my iPad if I forgot the passcode?
    http://www.everymac.com/systems/apple/ipad/ipad-troubleshooting-repair-faq/ipad- how-to-unlock-open-forgot-code-passcode-password-login.html
    iOS: Device disabled after entering wrong passcode
    http://support.apple.com/kb/ht1212
    How can I unlock my iPad if I forgot the passcode?
    http://tinyurl.com/7ndy8tb
    How to Reset a Forgotten Password for an iOS Device
    http://www.wikihow.com/Reset-a-Forgotten-Password-for-an-iOS-Device
    Using iPhone/iPad Recovery Mode
    http://ipod.about.com/od/iphonetroubleshooting/a/Iphone-Recovery-Mode.htm
    You may have to do this several times.
    Saw this solution on another post about an iPad in a school environment. Might work on your iPad so you won't lose everything.
    ~~~~~~~~~~~~~
    ‘iPad is disabled’ fix without resetting using iTunes
    Today I met my match with an iPad that had a passcode entered too many times, resulting in it displaying the message ‘iPad is disabled – Connect to iTunes’. This was a student iPad and since they use Notability for most of their work there was a chance that her files were not all backed up to the cloud. I really wanted to just re-activate the iPad instead of totally resetting it back to our default image.
    I reached out to my PLN on Twitter and had some help from a few people through retweets and a couple of clarification tweets. I love that so many are willing to help out so quickly. Through this I also learned that I look like Lt. Riker from Star Trek (thanks @FillineMachine).
    Through some trial and error (and a little sheer luck), I was able to reactivate the iPad without loosing any data. Note, this will only work on the computer it last synced with. Here’s how:
    1. Configurator is useless in reactivating a locked iPad. You will only be able to completely reformat the iPad using Configurator. If that’s ok with you, go for it – otherwise don’t waste your time trying to figure it out.
    2. Open iTunes with the iPad disconnected.
    3. Connect the iPad to the computer and wait for it to show up in the devices section in iTunes.
    4. Click on the iPad name when it appears and you will be given the option to restore a backup or setup as a new iPad (since it is locked).
    5. Click ‘Setup as new iPad’ and then click restore.
    6. The iPad will start backing up before it does the full restore and sync. CANCEL THE BACKUP IMMEDIATELY. You do this by clicking the small x in the status window in iTunes.
    7. When the backup cancels, it immediately starts syncing – cancel this as well using the same small x in the iTunes status window.
    8. The first stage in the restore process unlocks the iPad, you are basically just canceling out the restore process as soon as it reactivates the iPad.
    If done correctly, you will experience no data loss and the result will be a reactivated iPad. I have now tried this with about 5 iPads that were locked identically by students and each time it worked like a charm.
    ~~~~~~~~~~~~~
    Try it and good luck. You have nothing more to lose if it doesn't work for you.
     Cheers, Tom

  • This ipad hasb't been backed up in 6weeks. Backups happen when this iPad is plugged in , locked, and connected to wi-fi. i see this message in my ipad for last four days. i can't get out of it. i can't slide to power off on the sreen

    i have recieved the message on my iPad: This ipad hasb't been backed up in 6weeks. Backups happen when this iPad is plugged in , locked, and connected to wi-fi. i see this message in my ipad for last four days. i can't get out of it. i can't slide to power off on the sreen. the touch screen is locked. So i can't do anything eithere switch off or reset. kindly advice me.

    Try this support article >  iOS: Not responding or does not turn on

  • Can the external volume control be lock on model Md128c

    can the external volume control be locked and accidental adjustments

    I only just spotted this myself... by accident! fantastic feature- maybe should try and make more people aware of it though.

  • My iTouch's screen is locked. Can't slide to unlock. Already reset to factory settings and restarted iTouch. Please help.

    iTouch screen is locked. Can't slide to unlock. Reset to factory settings and restarted it from the decice. Voice activation works. Please help.

    try restart
    http://support.apple.com/kb/ht1430
    and make sure your fingers are not too dry
    if it still don't wok then yes it's likely a defect with the touch of the screen

  • On my iPod touch I can't access the 'Lock Sounds' feature. I have no sound and I can't get to the volume limit nor do i have the passcode once i am able to access it, any suggestions?

    On my iPod touch I can't access the 'Lock Sounds' feature. I have no sounds and I can't get to the volume limit feature nor do i have the passcode once i am able to access it, any suggestions?

    On my iPod touch I can't access the 'Lock Sounds' feature. I have no sounds and I can't get to the volume limit feature nor do i have the passcode once i am able to access it, any suggestions?

Maybe you are looking for