Can WCS identify and track Bluetooth devices?
I realize the WCS can track rogue AP's, clients, RFID tags, etc... but waht about Bluetooth devices? Don't see anything documented about this.
I believe that if it could, it would only show up as a roving noise/interference source.
Bluetooth uses all / most of the same spectrum as 802.11b/g .... except it uses it by hopping across it, not staying on a single "channel" as the 802.11b/g clients do.
So, to a bandwidth monitor, it would appear as a full-spectrum noise, which (if mobile) would travel across the monitored zone.
It may be able to pinpoint the source through triangulation .... I'm not sure and haven't had much playtime on the WCS.
Good Luck
Scott
Similar Messages
-
How can I connect to other bluetooth devices
Hi Folks,
Having only just become a new iphone 4s user I've now found out that my iphone will not connect to any other manufactured phones and other Bluetooth devices, is there any way around this or is it an iphone only club!!!. Many thanks in anticipation of a reply, Astonharry.You need to go to the App stores and find compatible apps. iOS device do not natively have to ability to transfer info to a computer via BT to a computer.
With iOS 8 you can use AirDrop -
How can I identify and delete duplicates on the latest version of itunes?
How can I identify and delete duplicates on the lastest version of iTunes?
The show duplicates/show exact duplicates features have been left out of iTunes 11. Rumor suggests they will be restored in the next build. In the meantime I have written two Windows scripts to make playlists of Duplicates and Exact Duplicates, either from a selection of tracks or the entire library. Note that, as with the iTunes feature, this list makes no distinction between "originals" and "dupes", you have to decide which is which.
There is also my DeDuper script for automatically removing duplicate copies but keeping one remaining copy of each set. This can preserve ratings, play counts, playlist membership, etc. which are lost in a manual clean up. Please take note of the warning to backup your library before deduping. See this thread for background on deduping and the script.
If you want to manually remove duplicate tracks use shift-delete to remove selected tracks from the library as well as the playlist. Keep one of each repeated group of files and don't send the others to the recycle bin unless you are sure that there are multiple files on the disc as opposed to multiple entries to the same file. Same advice to backup applies.
tt2 -
8830 and Blueant bluetooth device
I can pair my Blueant Z9i bluetooth device to my Sprint 8830. But, when I do, the volume control on the B/B becomes locked at a low level. Thus, the volume on the headset is too low, even when the headset is set on max. Anything I can do to unlock the 8830's volume control and adjust it above "low"? Blueant says it's a Blackberry problem (I've tried it with other 8830s, and it locked the volume on all of them!), B/B says it's a Sprint problem, and Sprint says it's either Blueant or B/B! Help! Has anyone else encountered this? We have hundreds of 8830s here, and I tried 4 others, and they all locked the volume upon pairing. Thanks!
Try looking at this link:
http://docs.blueantwireless.com/en/Q1/troubleshooting/blackberry.html -
I have several thousand digital photos of which several are duplicates. Can I identify and remove them using Photoshop Elements 13?
See:
Elements Organizer Help | Search options to find media -
How can i cfp and nuke the device ??
how can i cfp and nuke the device ??
my Z10 stl100-1 have a bb10-0015 error and i can't use link to reload it And more than one way can't fix this error
autoloader can't connect to the device just ask me for my password
some one tell my the way to fix it cfp and nuke the device
whats that mean
plzz help meYou already have multiple threads running on this issue, and duplicating with a new thread doesn't help, please refer to your previous threads.
http://supportforums.blackberry.com/t5/BlackBerry-Z10/can-t-reload-aftar-i-have-BB10-0015-error/m-p/...
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code -
My iPhone 4 Bluetooth, using ios7, cannot identify any other bluetooth device (even other apple products). Says device not supported. How to solve this problem?
Supported Bluetooth Profiles
It is not supposed to detect other Apple products via Bluetooth. -
How can I identify and remove duplicate file (audio & photo)
How can I identify and remove duplicate file (audio & photo)? I have quite a few libraries created as backup files.
Terence,
Yes, the duplicates appear in the iPhoto window. I have folders with same name occuring two or even three times sometimes with exactly the same set of photos (ie photos with the same ID) and sometimes with a limited set of photos. Other folders appear only once.
I normally take my MacBook with me if I'm shooting a lot of photos, such as on holiday, and then want to transfer them to my iMac when i get home. Other times I transfer the camera's memory stick directly to my iMac.
I have great difficulty transferring the photos from my MacBook to my iMac. I don't want to store my photos on my iDisk due to the length of time it takes to upload them.
Thanks again.
Simon -
I recently tried to update my iphone software via itunes but got an error and my iphone has gone to recovery mode and now it doesn't connects to my itunes. i tried everything but can't connect and apple mobile device(recovery mode) driver is not installed. Where can i get apple mobile device(recovery mode) driver software? please help
http://support.apple.com/kb/TS3694#error1
-
I have suddenly lost the volume from my iPad. It works through the Bluetooth device only. I have turned off the lock rotation in settings.
The Settings > General > Use Side Switch To does not turn rotation lock nor notification mute on or off, all that setting does is say what the switch on the side of the iPad is controlling. What do you have Use Side Switch To set to ? If 'mute' then you need to slide the switch on the side of the iPad above the volume control 'off' (so it doesn't show orange) to unmute ; if you have the side switch set to control 'rotation lock' then you can mute/unmute via Control Centre (swipe up from the bottom edge of the iPad, if the mute is white then sounds are muted, tap it to unmute and the icon should turn grey).
If that doesn't work (and Bluetooth is off) then try a soft-reset. -
Help! Must Delete and Recreate Bluetooth Device Each Sync
I need to Hotsync my Treo 650 under both Mac OS X v.5 (Leopard) and Win XP on the same machine running under Boot Camp. Before Leopard, I was able to do this via Bluetooth (cable on Treo 650 does not work right at all) without issue.
Under Leopard, when I try to Hotsync, I get the error, "Unable to initiate Hotsync operation because port is in use by another application". If I Delete the device from the Bluetooth list and setup the device from scratch, it works perfectly and continues to do so while in Leopard.
But when I go to Win XP under Bootcamp and try to sync, I get the same error message all over again. To fix it, I delete and recreate the device setup in Bluetooth and it syncs just fine while in XP. But when I return to Mac OS X, I am back to the same error message and must delete and recreate the device again.
Does anyone know how I can set up the Treo 650 so that I don't have to delete and recreate the Bluetooth setup everytime I need to sync?Hi,
see this thread :
http://forums.ni.com/t5/LabVIEW/Using-the-Bluetooth-of-a-Mobile-Phone-with-LabVIEW/m-p/1623196#M5864...
regards,
V-F -
How can i use iobd2 with bluetooth device obd2
Hi,
I want to connect an obd2 bluetooth device with my iphone 4S/ipad 3 via bluetooth. My Apple device can't find the bluetooth device. What can I do to solve this Problem? I don't want to buy an android tablet or phone.Better a year late than never... There is an answer on Re: I want to connect a obd2 bluetooth device. Do i have to buy an android?
-
I run a small service company and we use the iphone 4, do you have a program we can use for scheduling from one or two computers that allows us to schedule service calls and track our service techs.
A program we can enter each phone and have there schedule and current location available at all times.Search the iTunes App store or find a developer to create an app that meets your needs.
-
Can you export to a Bluetooth device?
I wonder if it possible to export pictures to a mobile phone via bluetooth.
Does the Bluetooth device mount in the Finder? If not then you’ll need to export to the desktop and then move the files to the device with the BlueTooth File Exchange.
Regards
TD -
Can I upgrade and add a device on the same order?
I am on My Verizon and can't figure out how to upgrade and add a new device on the same order. Is there any way to do this or do I have to do seperate orders?
maxpower12 wrote:
I am on My Verizon and can't figure out how to upgrade and add a new device on the same order. Is there any way to do this or do I have to do seperate orders?
Online has a difficult time processing more than one account transaction at a time. One order has to be completed before the other can be started, and if it involves a change to your plan which won't take effect until the next billing cycle, it won't process the second part at all.
I have found I can get the same online deals by calling customer service and explaining (clearly, politely) that I was unable to complete the transaction online. They have been able to manage the multiple changes (add a line, upgrade another line, etc) quite efficiently.
The only time they will not match online prices is if you were trying to order from a third party, like Amazon or Wirefly - you will get VERIZON's online prices, not another vendor's. **Edit - I see you are using MyVerizon...so customer service will be your best shot.
Message was edited by: SuzyQ
Maybe you are looking for
-
Migrate from GUI to web based application
what's the easy and the fast method to migrate java GUI application to a web based aplpication. thanks in advance for information
-
My Ipad doesn't connect to wifi while all other devices are connected.
My iPad doesn't connect to wifi anymore while all other devices in the same network are connected including iPod. iPad was connected this morning, but quit connecting since this afternoon. It tries to connect, but everytime connects, it disconnect wi
-
I have a desk top which has Windows Vista. On this computer I have been running Itunes for a long time. My new computer is a Lap top and it runs Windows 7. I recently loaded Itune on the new computer. I attemted to use Easy Transfer to transfer my
-
No Webobjects in "New Project" Assistant
Hello, I would like to learn how to program with Webobjects. I installed Xcode 3.0 and failed to include the Webobject option, I then went back to the DVD and installed the Webobject pacakge. When I open up Xcode and click on "New Project" There is n
-
hello again! : ( I have problems with receiving mails, my installation is local, therefore I am using telnet but it marks errors to me you have some idea? bash-2.03# telnet pegaso.qoslabs.com 25 Trying 192.168.20.20... Connected to hostname.com. Esca