Can we able to see the Work Items status in the BPM Workspace

HI,
Can we able to see the work item status in the BPM workspace.
For exampls, I have create the request as requester then it will go for approval.
After sometime i login into the workspace can i able to see my request status(it mean where it is like approval1, approval 2)?
Pls let me know, its possible in the BPM workspace.
Regards,
Anandh P

Hello Anandh,
You can utilse the filter option of the BPM workspace.
When you filter the instances you can view the status of all the instances even if they are currently not assigned to the particular user.
All you need to do is click on the show filter link.
Select the process from the Filter by: combo box.
Check the status boxes and click on apply filter.
You will be able to view the instance even if it is not assigned to you.(Though you will not be able to work on it.)
If you wish to give custom messages like "pending with HR" or "Pending with Admin" then you need to add a column by creating a project variable and mapping it to the custom view. Then these messages can also be shown on the instances.
Hope ths helps.
Regards,
Jaydev Doshi

Similar Messages

How can i able to see the Task in CWB Administrator page

Hi Everyone,
Hope everybody is doing fine !
Here i'm requesting for help in CWB administrator setup, i have done the CWB setup as required like;
1. Defined Plan Years
2. Defined Life Event Reasons.
3. Defined Plan Type.
4. Defined Plan. (4.1. Defined Task within Compensation Workbench Tab)
5. Defined Plan Enrollment Requirements.
6. Defined Standard Rates.
7. Run Program "Participation Process: Compensation Workbench"
8. Found require employees processed sucessfully from log.
9. Loged in as Manager/Administrator > Open Compensation Workbench Administrator page
10. Found message "There is no Task for Employee"
So could anybody please help me, how can i able to see the task work sheet in CWB administrator page.
Regards
AshokP

Hi Avinash,
Thanks For Your Response,
I have created task in Plan window (Navigate to Details > Compensation Workbench (Select Task Type) with Full Access.
So could you please advise me, whether i'm skipping any step as you have been stated like Task needs to be define under 'Plan Enrollment Requirement Window'
Thanks
AshokP

I am using 3GS in my iPhone I can't able to see the wallpaper

I am using 3GS in my iPhone I can't able to see the wallpaper

Could you please edit your question and include more details about your problem as I do not complelty understand your problem.
Thanks,
- Tim

I can't able to see BI content SRM cube and quries in bex anlyzer?

I can't able to see BI content SRM cube and quries in bex anlyzer under search, roles and infoarea?
Details: Today I installed SRM Cube 0SR_FIC01 and all of its queries from BI contents (BI 7.0). I can't able to see the cube and its queries in Bex. But in RSA1 i can see that this cube is active.
How to find all the queries of this cube in bex? the search option was able to find the cube but that is all. my goal is to see all the queries off of this cube.

go to the AWB - open ur cube - menu - edit - where used to - there you shoudl be see all the queries that you have installed. If you dont see any queries out there, the queries were installed properly. Reinstall the queries.
If you see them there, then it shoudl be a authorization issue. Talk to ur security folks

I have an iTunes account where I have downloaded Digital movies & I am able to see the list on the desktop of the original downloads. When I log on another device with my login I do not see my list to access them. Why can't I access from another device

I have an iTunes account where I have downloaded Digital movies & I am able to see the list on the desktop of the original downloads. When I log on another device with my login I do not see my list to access them. Why can't I access from another device

Hey GingCarv,
Great question. You'll want to download the movies from your purchase history. The following article explains how to do so:
Downloading past purchases from the App Store, iBookstore, and iTunes Store
http://support.apple.com/kb/HT2519
Note: At this time, movies are not available for automatic downloads.
Thanks,
Matt M.

Not able to see the open items in f-53

Dear All,
One user has posted some vendor invoices by using the fb60 in 2010 december month.when the user is trying to do the payment by using "f-53" transaction code, the open items are not appearing here. the items are not set blocked.
We are able to see the open items with over due simble. but not appearing in f-53.
please any body could help me in this.
Thanks and regards,
Mr.Rao
Moderator message: not directly related to ABAP development, please have a look in the respective functional forum.
Edited by: Thomas Zloch on Jan 6, 2011 4:21 PM

Hi,
Check in table REGUP in transaction SE16N, whether this invoice document number is there.
If yes, you will get the payment run information there and then in F110 you need to process that completely.
Regards,
Gaurav

I have an external hard drive from my time capsule that stopped working on me. I am attempting to access the data with a hard drive reader on my MAC. I am able to see the drive in disk utility and under system info USB. But I am unable to access the data.

I have an external hard drive from my time capsule that stopped working on me. I am attempting to access the data with a hard drive reader on my MAC. I am able to see the drive in disk utility and under system info USB. But I am unable to access the data and it does not show on the desktop when connected.

Ok if disk utility was able to verify the drive I doubt there is any problem.. are you trying to open a TM backup??
You need to mount the sparsebundle then check the actual info inside the bundle.
Don't use disk warrior.. if the disk has verified then unless you deliberately deleted files there is nothing that is going to do.
Pondini has a lot of stuff about getting access to the sparsebundle.
http://pondini.org/TM/17.html
But if you have copied info to the TC that is now gone.. and the disk is ok.. I am not sure.. the TC will not have deleted the files itself.

I tried to send a mail message to too many addees. when the rejection came back "cannot send message using the server..." the window is too long to be able to see the choices at the bottom of it. how can i see the choices at the bottom of that window?

I tried to send a mail message to too many addees. when the rejection came back "cannot send message using the server..." the window is too long to be able to see the choices at the bottom of it. how can I see the choices at the bottom of that window?

I tried to send it through gmail and the acct is a POP acct
I'm not concerned about sending to the long address list. I just can't get the email and window that says "cannot send emai using the server..." to go away. The default must be "retry", because although I cannot see the choices at the bottom of the window if I hit return it trys again... and then of course comes back with the very long pop up window that I cannot see the bottom of so I can tell it to quit trying...

I have reset my macbook pro to factory reset the screen is now asking me to put in my details, do i have too as if i am showing it to someone they need to be able to see it working but does that not mean that my name will be on it. please help

i have reset my macbook pro to factory reset the screen is now asking me to put in my details, do i have too as if i am showing it to someone they need to be able to see it working but does that not mean that my name will be on it. please help

Use a alias, but you might have to use a zip code that matches the location used.
Also if you click the right button there is a way to bypass the registration, like register later or something, Apple has it hidden. Also to bypass the internet connection to send the registration off.
Never place your name on a Mac or PC, it's spread throughout the entire machine, in emails, on the network in plain sight etc.

Hi All, my iPhone 3GS is showing rotate lock : how can I reset back to be able to see the screen/website in landscape position. Thank you.

hi All, my iPhone 3GS is showing rotate lock : how can I reset back to be able to see the screen/website in landscape position. Thank you.

Double tap the home button to bring up the multi-tasking bar, swipe left to right, far left is the orientation lock button, tap on/off. Tap home button when finished.

The scroll back gesture to the previous page, even after i sign out of my email account or Facebook anyone can still be able to see the content in the accounts just by scrolling back using the gesture.

the scroll back gesture to the previous page, even after i sign out of my email account or Facebook anyone can still be able to see the content in the accounts just by scrolling back using the gesture. how can i stop safari from showing the content of my accounts?

Try calling Tech Support, they should be able to check to see if theres a lock and try to help you reset it, I had to call and get my account unflagged, for something that I didn't even do.

I am not able to see the airplay icon with Maverick. Can anyone help on how to go about this?

I am not able to see the airplay icon with Maverick. Can anyone help on how to go about this?

Does restarting the router help?
Best.

HT5557 I've always been able to see the clock at the top of the screen in iPad iBooks, but the clock has now disappeared unless I tap at the stop of the screen. How can I get the clock to stay at the top of the screen?

I've always been able to see the clock at the top of the screen in iPad iBooks, but the clock has now disappeared unless I tap at the stop of the screen. How can I get the clock to stay at the top of the screen?

cktan124: I searched around and found the iPad does not have a PRAM.
Anyone else want to guess?
I found many folks here trying to hide of the clock, but I need the clock. I use a PDF on my iPad for my notes when I am speaking in front of an audience. I need the clock so I can kep track of time.

When I connect my Air to my Samsung TV, I am able to see the screen mirrored on the tv for a split second before the tv turns to static. This pattern then cycles over and over. I can't get the image to stay on the tv screen. Any ideas?

When I connect my Air to my Samsung TV, I am able to see the screen mirrored on the tv for a split second before the tv turns to static. This pattern then cycles over and over. I can't get the image to stay on the tv screen. Any ideas?

Try:
- Going to NF support site/contacting them
- Try a different adopter
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.

Not able to see the tree on the jspx page after running

Hi All,
This is something strange.I am dragging the VO on the page fragment from the data control as adf tree. And I am using the panel collection as component for adf tree.
After running the jspx when I am moving to the fragment I am not able to see the tree.
However when I am running the AM it is working properly for the view objects and view link used to populate the tree.
Can anybody put some thoughts on this.
Thanx
Kanika

Thnx for your replies..
I am dropping taskflow as region . I am not using the switcher component.
On left side of the page the tree is visible now. but the taskflow is not refreshing on the click of the tree node based on the value of the node.
Please advice how to accompolish this now??

Can we able to see the Work Items status in the BPM Workspace

Similar Messages

Maybe you are looking for