Can we activate the Sales Area Tab for Prospect?

Hi all
My client requirement that
When ever we creating a Sold to party subscreen sales area will be activated, for the same can we activate sales area tab for Prospect is it possible?
Help to implement this.
Regards
sathish

Hi Satish,
Your requirement sounds very un-usual to me. Sales area data will only be seen when sold-to is maintained.
I don't see any requirement why a prospect is to be maintained in a sales area, especially when he/she is not yet started any relation with sales organizational data.
It is better to promote a prospect as customer as and when required, rather than implemeting a complex code changes. Give a try to convience your business.
This is my general comment and not debating on your requirement.
<b>Reward if helps</b>
Regards,
Paul Kondaveeti

Similar Messages

  • Custom fields to the sales area tab of customer master data

    Hi Guys,
           i have one requirement, where i need to add Zfields to the Sales tab in sales area data of customer master. Can somebody give me steps how to do it? do we need to do screen programming or just appending KNVV so that functional consultants can do configuration based on account group?
    help would be appreciated
    Thanks in advance
    Siva

    Hi,
         .First in IMG - Enterprice Structure - Definition
    Create the Organisational Units you want to use
    2.Then In Enterprise structure - assignment
    Setup the sales areas you want to use in SD
    Then go to XD01/ VD01 and create a new customer to whom you want to sell goods & service thr a particular sales area which you have already set up in IMG.
    YOu can create a customer master for only those sales areas which you have created in Step 2 above.
    Then create a sales document type VOV8 and then assign sales document type to sales area in which you want to use.
    IMG-Sales & distributin-sales-sales document-sales doc header
    Do all other assignments like item category determination, schedule line category, pricing procedure determination etc
    and then you can cretae a sales document using the particular sales area.
    <b>Reward points</b>
    Regards

  • Can't see the sales area in XD01( in all sales area) even  OVXG has defined.

    Hi,
    In XD01 while creating cusotmer master in all sales area system is not showing  7800-90-01( sales area)even though it is defined in OVXG.
    This is the  reason why may be am not able to create customer in 7800-90-01sales area.
    here is the screen shot.
    And OVXG. I think what ever OVXG it should be shown in customer master XD01 in all sales area right?
    And let me know what more setting could be missing?
    and the same above  in Development system it is displying in Xd01 in all sales area hence am able to create customer master in sales area 7800-90-01.
    I have compareted all  the required settings in DEV and Quality system ( example VOR1, VOR2 and OVXG etc) all are same in both the system.
    Please share your thougts.
    thanks,

    Hi Surya,
    My understanding is that you have no problem in creating in customer master whereas there is an issue of sales area in Quality system. As mentioned by you you have compared all the configuration setting in both the client.
    Suggest you to please compare at table levels as well like "TVTA  for comon distribution channel and similarly for the common division (which i dont remember now) .I have faced this issue before thats why i am suggesting you to please check.
    Thanks,
    Umesh    

  • Org Model reflection in BP Sales Area TAB

    Hi Friends,
    I have created new Org Model, but some how this is not getting reflected in the Sales area TAB of BP.
    Also i updated the buffer as per best practices.
    Kindly provide some inputs.
    Thanks and Regards,
    Suraj

    Thanks for your quick response.
    What i am doing is creating a sales organisation in CRM without entering Reference R/3 sales organisation.
    Also i checked the "obj. permitted in determination" in a sales org.and run the report "HRBCI_ATTRIBUTES_BUFFER_UPDATE" .
    I already done all the above mentioned things, but still i am facing the problem.
    One pt is that the table "CRMD_ORGMAN" doesnt have the entry of newly created sales org.
    Please provide some inputs.
    Thanks and Regards,
    Suraj

  • Sales area tab missing when I choose Sold 2 Party role

    HI ,
    When I am creating BP with role Sold2party ,the sales area tab is missing.Please help me
    Edited by: OBT User on Mar 19, 2009 12:29 PM

    hi ,
    thanks a lot
    I tried all the  solutions given by you ,but its not working.
    I will state the problem I am facing clearly:
    I chose a  'person '  or 'organisation' and created a BP.After that I wanted to give him Sold-to-Party role.
    When I choose sold-to-party role I should get 'sales area data' button next 'general data' button.That button is missing for me.

  • Can we check the Objects modifiable " option for standard objects

    Dear Friends
                 In IR , we have imported SRM SERVER->SRM SERVER5.5
    Then we  have checked the option<u><b> "Objects are modifiable"</b></u> then we imported the IDOC from R/3 system under SRM SERVER 5.5 swcv.
    Then created the mapping.It is working fime.
    how ever i am not sure whether it is right process.Can we check the "Objects are modifiable" for standard compoents delivered by SAP????
    Regards
    chandra

    Hi Jai,
      <i> >>>Can we check the "Objects are modifiable" for standard compoents delivered by SAP????
    No. As best practise you are not supposed to do so.</i>
    In order to implement any changes in the mapping we can do it rite.
    Because recently i have applied one SAP note to my SRM swcv and one of the MM object was changed according to the requirements.
    Thanks,
    Prasanthi.

  • Unable to see sales area tab in CRM production client

    Dear Experts,
    I established middleware connectivity between CRM 2007(001) and  ECC 6.0(200)  Production Clients,
    i maintained following settings
    Used transaction code BUSD
    and select the respective role and click on BP Role -> Subheader ID
    Checked the entry 'CRM001 CRM: Sales Area Data'  and even i checked the consistency is ok and  active in org model.
    But still I am unable to see sales area tab in the BP master In the CRM production client (001) .
    Plz sugest what else i have to do to rectify this problem.
    Regards
    V.srinivas

    Hi Chandra
    We all ready  done buffering.
    We have  executed report HRBCI_ATTRIBUTES_BUFFER_UPDATE, 
    and the scenario SALE is flagged as buffered in customizing table T77OMATTSC.
    But still we are not able see the sales area tab in bp master.
    Note : one thing we noticed when we selected the r3 reference customers when copied sales area into crm bp by using the tcode crmc_bupa_consum  we are able to see the sales area tab.
    But when we trying to create new bp by using role Sold to party we are not able to see Sales area tab in bp master.
    Regards
    V.Srinivas

  • How can I activate the transfer rules for the ODS updating a data target.

    We are on BW 3.5 and I'm loading data into the 0FIGL_O10 ODS  and then uploading the data into the cube 0FIGL_C10. The data loads just fine to the ODS but when I try to <u><b>'update the data target'</b></u> I get a date & time stamp' error on the info-package transfer rules.
    I then Replicate the datasource 80FIGL_O01.
    I must then <u><b>'activate' the transfer rules</b></u>.
    However I cannot get the transfer rules for 80FIGL_O10 in CHANGE MODE to activate them.
    How can I activate the transfer rules for the ODS updating a data target.
    The error text is as follows:
    DataSource 80FIGL_O10 has to be replicated (time stamp, see long text)
    Message no. R3016
    Diagnosis
    DataSource 80FIGL_O10 does not have the same status as the source system in the Business Information Warehouse.
    The time stamp in the source system is 02/15/2007 10:42:33.
    The time stamp in the BW system is 11/07/2006 13:11:54.
    System response
    The load process has been terminated.
    <b>Procedure
    Copy the DataSource again and then activate the transfer rules that belong to it. You have to activate the transfer rules in every case, even if they are still active after the DataSource has been copied.</b>
    Thanks for your assistance.
    Denny

    Hi Dennis,
           Try, using Business Content to activate your data source
           hope this will help you
    How activate business content?
    http://help.sap.com/saphelp_nw04/helpdata/en/80/1a66d5e07211d2acb80000e829fbfe/frameset.htm

  • Can you use the same charging cable for both an iPhone and an IPad or are they different?  When I use the charging cable for my iPhone on my Ipad, it doesn't charge.

    Can you use the same charging cable for both an iPhone and an IPad or are they different?  When I use the charging cable for my iPhone on my Ipad, it doesn't charge.

    The quickest way (and really the only way) to charge your iPad is with the included 10W USB Power Adapter. iPad will also charge, although more slowly, when attached to a computer with a high-power USB port (many recent Mac computers) or with an iPhone Power Adapter (5W). When attached to a computer via a standard USB port (most PCs or older Mac computers) iPad will charge very slowly (but iPad indicates not charging). Make sure your computer is on while charging iPad via USB. If iPad is connected to a computer that’s turned off or is in sleep or standby mode, the iPad battery will continue to drain.
    Apple recommends that once a month you let the iPad fully discharge & then recharge to 100%.
    How to Calibrate Your Mac, iPhone, or iPad Battery
    http://www.macblend.com/how-to-calibrate-your-mac-iphone-or-ipad-battery/
    At this link http://www.tomshardware.com/reviews/galaxy-tab-android-tablet,3014-11.html , tests show that the iPad 2 battery (25 watt-hours) will charge to 90% in 3 hours 1 minute. It will charge to 100% in 4 hours 2 minutes. The new iPad has a larger capacity battery (42 watt-hours), so using the 10W charger will obviously take longer. If you are using your iPad while charging, it will take even longer. It's best to turn your new iPad OFF and charge over night. Also look at The iPad's charging challenge explained http://www.macworld.com/article/1150356/ipadcharging.html
    Also, if you have a 3rd generation iPad, look at
    Apple: iPad Battery Nothing to Get Charged Up About
    http://allthingsd.com/20120327/apple-ipad-battery-nothing-to-get-charged-up-abou t/
    Apple Explains New iPad's Continued Charging Beyond 100% Battery Level
    http://www.macrumors.com/2012/03/27/apple-explains-new-ipads-continued-charging- beyond-100-battery-level/
    New iPad Takes Much Longer to Charge Than iPad 2
    http://www.iphonehacks.com/2012/03/new-ipad-takes-much-longer-to-charge-than-ipa d-2.html
    Apple Batteries - iPad http://www.apple.com/batteries/ipad.html
    Extend iPad Battery Life (Look at pjl123 comment)
    https://discussions.apple.com/thread/3921324?tstart=30
    New iPad Slow to Recharge, Barely Charges During Use
    http://www.pcworld.com/article/252326/new_ipad_slow_to_recharge_barely_charges_d uring_use.html
    Tips About Charging for New iPad 3
    http://goodscool-electronics.blogspot.com/2012/04/tips-about-charging-for-new-ip ad-3.html
    Prolong battery lifespan for iPad / iPad 2 / iPad 3: charging tips
    http://thehowto.wikidot.com/prolong-battery-lifespan-for-ipad
     Cheers, Tom

  • Can't activate the COMPARE function for object DNL_CUST_TVAST for Adapter

    Hello
    I've applier OSS note 866824 to enable the exchange of the sales area flag deletion. I had to do the initial download for the customizing object DNL_CUST_TVAST but it failed because the no intial load was permitted as the data distribution was active. So I've applied note 887696 to enable the intial load for this object : I've deleted the COMPARE function for this object with transaction R3AC3. I've done the initial load for this object and now I can't add the COMPARE function : the error message is enter linked bdoc type for synchronisation load. and I don't know what to do...
    if somebody can help me...
    thanks a lot

    Thanks for your tip but it does not work, I need to fill this field.
    I just have an answer from SAP support, this value COMPARE is relevant for loading data in CDB.
    there no sense to add the compare value for this object : the compare load can never be used for this object. It was a delivery error
    Edited by: Jerome Munier on Dec 5, 2008 7:13 PM

  • HT201441 i got iphone 5s from my uncle. he linked his account with the device. he gifted me the phone. unfortunately he's no longer :(. for that i can't activate the phone :(

    i got iphone 5s from my uncle. he linked his account with the device. he gifted me the phone. unfortunately he's no longer :(. for that i can't activate the phone :(

    Welcome to the Apple community.
    Contact AppleCare (or Apple ID Support), upon speaking to an operator you should explain that your problem is related to your Apple ID, this way you will not be charged for assistance, even if you don’t have an AppleCare plan.
    I'm not exactly sure what procedures are in place for such events, but it may take a while and you may need to provide a death certificate and a note from the executor that the iPad has been willed to yourself.

  • After Installing the OS x Mountain Lion some o the softwares are asking for Java SE 6 Runtime. Can someone please help me find a solution.

    After Installing the OS x Mountain Lion some o the softwares are asking for Java SE 6 Runtime. Can someone please help me find a solution.

    By default, ML no longer comes with the Java runtime preinstalled. I believe the route to enabling Java if you are going to need it is to run the Java Preferences app found in Utilities. It will inform you of Java's absence and offer to install the latest version and activate it. On subsequent runs, the Preferences app will allow you to fine tune how the runtime operates.
    Note that the new default operation is for the applet plugin to be disabled. You need to enable it as needed and it self-deactivates if unused in awhile. Also important to note that Java comes in both 32 and 64 bit versions and you can set the preferred order. Default is 64-bit but I've had issues with some applets failing to run and have had to switch the order.

  • To install Photoshop CS6, I have already downloaded the 2 files for Windows.  How can I activate the product?

    To install Photoshop CS6, I have already downloaded the 2 files for Windows.  How can I activate the product?

    I am having the same problem. I did download the two files and started the .exe file. The .exe file appears to run downloading files. When the bar is full the window dissapears without any options. Both files are in the same folder. any thoughts?

  • Hi ...Some days ago i bought a used iphone 4s....but i can't activate the phone...when i connect it to itunes it shown that activate the phone but the person was not give me the ID & password....pls help me for this issue....Iphone is my favourite ph

    Hi ...Some days ago i bought a used iphone 4s....but i can't activate the phone...when i connect it to itunes it shown that activate the phone but the person was not give me the ID & password....pls help me for this issue....Iphone is my favourite phone...in my child hood i love Apple products & till now......I can't activate it & for this reason i can't find the carrier network & can't make any call....pls help me...thanks for always support..My device ios is 7.1.2
    & IMEI is : *****
    Br-----------------------
    Fazlur
    <Personal Information Edited By Host>

    It's a security risk to post your IMEI number and I've asked the Hosts to remove it.
    If a second-hand iOS device has been 'Activation locked' then only the previous owner can unlock it, either by providing you with the account ID and password, or by removing it from his list of devices (as he should have done before selling it) - please see http://support.apple.com/kb/ts4515
    If you are unable to contact him to do this then I'm afraid you will not be able to use the device - there is no other way of unlocking it at all. Apple cannot unlock it for you.
    You should if possible return it to wherever you bought it and ask for a refund as in this event the device is completely useless.

  • Sales area duplicated for the Business Partner

    Hi gurus,
    I replicated the BO from R3 to CRM, and all the maintained sales area in R3 have been duplicated in CRM with and wihtout division.
    Example:
    In R3 for the BP 234
    we have the sales area:
    Sales Organization: BIOS
    Distribtn Channel: 01
    Product Division: AA
    And in CRM you have:
    Sales Organization: BIOS
    Distribtn Channel: 01
    Product Division: AA
    And
    Sales Organization: BIOS
    Distribtn Channel: 01
    Product Division: (without division)
    Any one knows if it is normal, or is there a way to stop the replication without division.
    Thanks,
    TPT

    Hi,
    In  the BP go to Sales Area Data and select sales tab. In that select the sales Org,D.Channel,division for which you want to maintain and enter all the detail in all the tabs (shipping,Sales,Billing etc) and save the BP.
    Regards
    Vinod

Maybe you are looking for