Can we add conversation view in e 71

can we add conversation view in e 71 in messaging application??

> Can someone tell me from where can we select / activate these / such fields.
They are active, no extra action is needed. You saw them, didn't you?
>
> Can anybody provide a list of such additional fields available in SU01
What you see is what you get. You've seen the additional name fields. Apart from that you can click on 'other communication' to see a list of fields there. That's it.

Similar Messages

Can't access Conversation View under the View menu. Using Daily 38.0a1. Any ideas?

I can get to the Conversation View under the View menu in TB release candidate 31.4.0. But don't see it under Daily version 38.0a1 64bit on different computer. Any help appreciated.
Thx

It is on the message menu

Can I add a view in IDR?

Best regards,

Hello Blake,
the view you added to the IDR via the ACA API is just like a normal UIBB block that you add to
other places, like OIF mainviews and subviews. Therefore when it comes to the matter of communication
between UIBB blocks you may stick to our following recommendation for that:
-> Use a shared ABAP class: That is to say, you create your own ABAP class and realize it as a singleton.
    That means at runtime there is only one instance of it. You can look upon our own FPM class cl_fpm in
    order to see how that is technically realized, look especially at method get_instance(). Now let's asume
    you have UIBB A and UIBB B that need to communicate with each other. Now just call get_instance()
    of you own ABAP class in each UIBB to get a handle to the singleton reference. From now on both UIBBs
    can communicate via method calls of the singleton class.
-> Use our shared data concept. Please have a look into the cookbook for how that is done.
Hope that helps,
Ulrich
BTW: I had a look at your screenshot. I have to say that I does not look like conform to the UI guidlines.
         That is because an icon is displayed without having an explanatory text assigned to it. Therefore
         I recommend strongly to contact your UX colleagues and discuss the matter with them.

Add sales view in Material number

Hi,
We have a material, which don't have Sales View.
How can we add sales view in it.
But this should be done for only 1 Material. because through oms2 transaction, we can extend according to material type..
Plz. guide...

>
Anil.Sap wrote:
> We have a material xxxxxx in plant A without sales view (because we are using Production Resource Tools material type, and in our configuration we dont have sales view in it).
>
> so we want sales view only in 1 material number.
>
> and after add sales view, we have to extend that to plant B.
>
> plz guide, how to add sales view in 1 material.
You can only add a sales view to a material if the material type customizing allows sales views in general.
you certainly cannot create a sales view for a single material if the material type does not allow sales views.

Can no longer see messages in public folders in Outlook (2010) conversation view

(originally posted this under MS Community outlook discussion and it was suggested I post it here):
Hello:
I believe this may be related to a recent update, but previously I could see messages from public folders in my conversation view. Now, I am only able to see messages in private folders (including sent items).
I have the cached exchange mode on.
I loved the conversation view because I could move e-mails out of my inbox to public folders (on our company server) to keep my inbox under required size limits, but still have easy access to e-mails within the conversation string. That view in my
opinion was the best upgrade to Outlook when it first came out. Now it's virtually useless for me again.
If there's something i can change to get those messages re-appearing again I'd really love to know what I can do, it was really useful for me.
Thanks in advance to any who reply!

Hi,
Based on the descrtiption, I know that there is no emails exist in public folder when using conversation view in Outlook after installing update.
1. I suggest use OWA to check whether emails exist in public folder when using Conversation View. If it works well, it seems an issue on the Outlook client side.
2. Please check the connectivity between Outlook and Public Folder.
3. I suggest disable conversation view for test to verify whether emails appear in public folder. If the emails appear, it seems an issue on Outlook Conversation View.
4. I also suggest run Outlook under safe mode to avoid some AVs and add-ins. Try to re-create profile to refresh the caches.
Thanks
Mavis Huang
TechNet Community Support

How can I add a new column to Grid view under Tests tab

I understand in "ORACLE Test manager for web Applications", the Grid view under Tests tab should be customised.
How can I add a new column to Grid view under Tests tab? Thanks Katherine

I don't think this is possible.
Regards,
Jamie

Views in MM03, how can I add fields and changes fields labels

Hi !!
I need to change some labels that appear on Sales: Sales Org 2 (view on MM03, MM02..MM01)...
Im not sure what I can do this.. Im an ABAP Programmer(beginner) and I know how I can change labels of fields in programs(reports) that I did...but in This case. I don't know what I can do...
example: when I enter on MM03..I select differents views(including Sales: Sales Org 2), later I specify sales Org and distribution Channel (I need to specify this information for see these fields on this TAB Sales: Sales Org 2).
When I access in tab: Sales: Sales Org 2, I can see one Group that it's called
Material Groups that contain two fields called MVKE.MVGR1 AND MVKE.MVGR5... I saw in the screen these fields with the description from each field..example: Material Group 1 (MVKE.MVGR1 )... I would like to know :
1.- How Can I change the description Material Group 1 (in this screen) by other description (example: material test)...
2.- How can I add more fields in this group...example..If I need to add MVKE.MVGR2 ..??
I will appreciate your help!!!
I will give you points for your answer
Alice

Hi Alice,
And do I need to change in this section too.... SPRO -> SAP Reference IMG -> Logistics general -> Material master -> configuring the material master -> ...
If I need to add some values???
After you made label changes on custom screen then you need to go configuration (Define Structure of Data Screens for Each Screen Sequence) to replace the standard SAP screen with custom screen. You can also do testing for custom subscreen as well. Give it try.
And how about If I move this screen??...is it dangerous??...or how can I know if this screen affect other section of programs?
I do not understand your questions. Can you elaborate more?
Regards,
Ferry Lianto

Can we add a new attachment to an existing SC from any other custom page in SoCo PO View

Hi Experts,
Need your expert advice on the below requirement.
We have created a custom view in SoCo PO page. There we have a New custom view called Notes&attachement.which contains same value from Notes & attachment of Shopping Cart.
We are updating existing Notes of SC by FM 'bbp_pd_sc_update' and same is reflected in SC of same item guid & same header guid.
Similarly trying to add a new Attachment to already existing attachment. New attachment is reflected in custom page and the describe link is working perfectly. but if come out of SoCo page , lets say in SC the new added attachment is shown but display_url,phio_size etc are not stored properly in DB.
in bbp_pd transaction every thing looks same for new and existing attachment. we are using same FM 'BBP_PD_SC_UPDATE' by passing new internal table of attachment in import statement. Even 'BBP_PROC_DOC_UPADTE' has same result that is attachment is partially updated.
Suppose, SC has one attachment at the time of creation. then adding a new attachment in custom view of SoCo PO page then every thing works fine in SoCo PO page but out of that SoCo PO or in SC the newly added attachment is not properly updated.
I have added mime_type,phio_size,disp_url,file_name,file_ext,ev_content of new attachment in existing attachment internal table and calling above FM for update.
Can we add new attachment outside SC to existing SC ? if yes , then how?
Thanks,
Partha

Hi Partha,
Please post this query in the category: SAP SRM. Your post currently shows up on the forum - SRM User Interface Add-on. As your query is not related to the new ad-on, you might not get as many responses in this forum as you would have if you had posted the query in the general SRM forum (http://scn.sap.com/community/srm).
Hope this helps
Cheers,
Yateesh

Recent convert to Apple. Previously, I backed up my family pictures from PC to an external hard drive, a WD MyBook 3T. I can view the pics on my Macbook Pro, but I can't add new pictures. I'm sure this is a format issue, any easy way to correct it?

Recent convert to Apple. Previously, I backed up my family pictures from PC to an external hard drive, a WD MyBook 3T. I can view the pics on my Macbook Pro, but I can't add new pictures. I'm sure this is a format issue, any easy way to correct it?

Install NTFS 3G
http://macntfs-3g.blogspot.com/
If you were going to be reading and writing to a NTFS System Partition, you might have to worry about the instability messing up the operating system. However, you are reading/writing from a non system, backup device so you don't have to worry about screwing up an operating system.
I would still temporarily move my data to another device and reformat the drive for Mac OS X Extended.

How can i add a new viewer to 9iAS and push client to run it ?

Dear All,
I hosted a page on Oracle9iAS which has links to documents of different types of desktop applications, for example: MS word, Excel, AutoCad ......
And i've a mutiformat viewer which i need to install it on Oracle9iAS to be run when a client tries to access any of the listed documents. So, how can i install this viewer to Oracle 9iAS and push client to run it ?

Si vous avez utilisé la commande Save As Template depuis Pages, il y a forcément un dossier
iWork > Pages
contenant Templates > My Templates
comme il y a un dossier
iWork > Numbers
contenant Templates > My Templates
Depuis le Finder, tapez cmd + f
puis configurez la recherche comme sur cette recopie d'écran.
puis lancez la recherche.
Ainsi, vous allez trouver vos modèles personnalisés dans leur dossier.
Chez moi, il y en a une kyrielle en dehors des dossiers standards parce que je renomme wxcvb.template quasiment tous mes documents Pages et wxcvb.nmbtemplate à peu près tous mes documents Numbers.
Ainsi, quand je travaille sur un document, je ne suis pas ralenti par Autosave.
Désolé mais je ne répondrai plus avant demain.
Pour moi il est temps de dormir.
Yvan KOENIG (VALLAURIS, France) mercredi 23 janvier 2011 22:39:28
iMac 21”5, i7, 2.8 GHz, 4 Gbytes, 1 Tbytes, mac OS X 10.6.8 and 10.7.2
My iDisk is : <http://public.me.com/koenigyvan>
Please : Search for questions similar to your own before submitting them to the community

IPod Touch 4th Generation issue - no longer able to view Device in iTunes? I can't add, Sync, Back Up or Restore?

The PC’s I use have Windows 7 installed along with the latest version of iTunes. I have
previously deleted all components of iTunes and re-installed. This made no difference. The PC’s do not recognise my iPod in the Windows Device Manager using ‘devmgmt.msc’. and still nothing in iTunes.
Also C:\Program files\Common Files\Apple\Mobile Device Support\Drivers / - do notlist ‘usbaapl64’.
The folders listed are ‘usbaapl.cat’, ‘usbaapl.inf’,‘usbaapl.sys’ and ‘usbaaplrc.dll’.
Whether this makes a difference I do not know.
iTunes doesn’t recognise my iPod either however it recognises my attached iPhones OK
(iTunes/File/Devices) with the options of Sync; Transfer Purchases and Back Up being available.
When my iPod is connected, iTunes shows the File ‘Devices’ sections as being inaccessibly greyed out.
So to reiterate, I have tried multiple computers and a variety of Windows operating systems (but I’m running Windows 7) with absolutely no success; the ‘Device Manager/Universal Serial Bus controllers/Apple Mobile Device USB Driver’ appears with my iPhone but nothing for my iPod; the Apple Mobile Device Support is installed; all my USB cables work OK; the device does not appear in Windows or in iTunes; iTunes has been fully uninstalled and reinstalled; the version of iTunes is up to date; the iOS of the iPod Touch shows it is up to date at version 6.1.6 (and cannot be changed) and even a hard reset has been tried. Everything tried and suggested with complete failure.
I can use a USB port to charge up my iPod and can still receive e-mails, updates to apps and can play songs but I can’t add any new songs or update iOS. There are no error codes because as far as the computer and/or iTunes is concerned, there is no connected iPod. My iPod used to work perfectly. Also I tried the Apple iPod forum without success and was advised to try the iTunes community support.
Please help! Thank you.

I'm having the same problem with my 4th gen iPod touch. After the update my iPod synched and wiped all my music off - apps & podcasts weren't affected. Restored it a couple of times and that didn't work.
I tried copying a couple of albums over and it would do a couple of songs then the rest of the album would look like it had copied instantly. I tried playing the songs and it would play the first couple of songs once, then it came up with ! Beside every song (including the ones I'd just played and said they weren't on my iPod.
I've removed iTunes from my laptop and downloaded the few iTunes bought albums over WiFi to my iPod. The rest of my music is from cds or mixes/podcasts downloaded from soundcloud so I've had to use a different program to copy some of this music to my iPod for the time being until I can see how to sort this out.

How can I add a phone number to my iPod touch to start new conversation from another number

How can I add a phone number to my start new conversation

Hello brentfrommt. washington
To add a phone number to your iMessage account, you need to have an iPhone with your phone number on it. Once you sign into iMessage the iPhone it will link to all your devices with that Apple ID. Take a look at the article below for more information.
iOS and OS X: Link your phone number and Apple ID for use with FaceTime and iMessage
http://support.apple.com/kb/HT5538
Regards,
-Norm G.

Can I add a lossless file to my itunes library?

Can i add a lossless music file to my itunes library? Usually what i do is drag the file or folder into music/itunes/itunes media/automatically add to itunes and it works fine, everything shows in my library and plays perfectly. But with this lossless file i drag it into the automatically add to itunes folder and it goes into the folder but doesnt show up in itunes. I think i know that itunes doesn't support lossless files, so can somene tell me how to convert them into apple lossless or MP3s (preferably apple lossless). Please help.

The are a variety of different lossless audio formats, some supported by iTunes, some partially supported and some not at all.
The best lossless audio format to use from an iTunes point of view is Apple Lossless aka. ALAC. iTunes can import (rip) audio CDs using this format. Other lossless formats supported by iTunes include WAV (partially) and AIFF, however these formats use more disk space than Apple Lossless and do not sound any better, and further more do not support meta-tags as well as Apple Lossless.
Another lossless format you may hear of is FLAC, iTunes does not support this format but it can be otherwise considered equivalent to Apple Lossless in file size and capability. You can convert FLAC to Apple Lossless with of course no loss of quality but you will need to use another utility to do the conversion.
There is also WMA Lossless, this is not supported for playing by iTunes but I believe can be imported (only in iTunes for Windows, not Mac).
So, contrary to your message, yes iTunes does support lossless audio files.
For what its worth I have all mine in Apple Lossless and share it with Windows Media Player and Microsoft Media Center which can also play Apple Lossless (with an additional free directshow filter).
Note: Music purchased from the iTunes store will all be in AAC format which is a lossey format.

Feedback on Outlook 2010 Conversations View

Outlook 2010 Conversations view is a great idea, but the Beta implementation has a few usability problems which prevent the feature from being successful-- if I had to use the feature in RTM in its current Beta state, I'd probably turn it off. But fixing it seems not too difficult-- there are only a handful of very annoying usability issues I've found so far. It'd be great to see the issues below addressed in RTM.
1) Keyboard Navigation shouldn't cause auto-expansion. When using the keyboard arrow keys to scroll through my inbox, Outlook will auto-expand the selected conversation. The result is that scrolling with the keyboard is like playing whack-a-mole, with conversations expanding and collapsing seemingly at random. This prevents effective reading of message titles and auto-previews. The same thing sometimes happens when I delete a conversation and the following conversation is selected. In either case, you should *never* auto-expand a conversation unless I press ENTER or right-arrow on a selected conversation. For mouse selection, auto-expansion seems more reasonable since you're not doing mouseclick-mouseclick-mouseclick in sequence like you do from the keyboard when reading and deleting messages.
2) Converation "From" is confusing. Your "From" field shows any unread senders only, and shows all senders if all messages are unread. I'd expect to see all senders in both cases. What's even worse is when you use auto-preview and the most recent message is already read. In that case, you'll see auto-preview text from the most recent (read) message but see a sender(s) of older messages. You'll see User-X's name as sender of User-Y's AutoPreview text. Weird!
3) minor thing: double-click of a collapsed conversation opens the newest message. Once it's expanded, double-click doesn't do anything. It should behave the same in both cases.
4) If you hit up arrow or down arrow to select a conversation, then quickly hit ENTER to open the top message in the conversation, it doesn't do anything. If you do the same thing but wait one second, before pressing ENTER, it will open the newest message. Behavior should be the same in both cases.
5) When I use up/down arrow to select a message with auto-preview showing, sometimes the auto-preview will vanish and sometimes it won't. This is really disconcerting since my eyes need to jump upwards several lines to see what just got expanded. If something is there when the thread is collapsed, it should stick around when it's expanded. Oddly, I don't see this behavior for all conversations-- some will stay showing auto-preview, some won't. Perhaps only one-line auto-previews stick around while 2-3 line autopreviews are hidden upon expansion?
6) When I right-click on a collapsed conversation, I'd expect to see "reply" or "reply-all" options (meaning reply to the topmost message in that conversation) but instead I need to separately select the message to reply to.
Other than these gripes, I think conversations view is definitely headed in the right direction. Nice work!
BTW, I already posted this feedback to the Office 2010 blog, but I got no responses there so am posting here so my feedback won't get lost.
Justin Grant

Thanks Diane for the quick reply! Some follow-up notes:
1. Cool! This is exactly the behavior I was looking for. Once I clicked the checkbox in Options, the behavior is much more predictable when using the keyboard. It's a bummer this setting is not easier to discover. Seems like this should be the default setting. Note that there's a display bug when this option is selected-- I sometimes see odd visual artifacts after I collapse a thread with the keyboard, e.g. rectangles which aren't painted correctly or show up as gray boxes.
2. Nope, you didn't understand correctly. :-) The problematic scenario is where there are some unread and some read messages in a conversation. In that case, the autopreview text shows for the most recent message in the thread (regardless of whether it's read or not) but the "From" field shows the senders of the unread branches only. The result is you can see a sender of one message showing up above the autopreview text for a totally different message. This is weird. And then once you read the last unread message, all the senders come back in the From field, so reading one message causes From to show 10 senders where before it showed only one.
After using it for a while, I like the auto-preview behavior of always showing the most recent message in auto-preview, even if that particular message is read. I also like the behavior of continuing to show auto-preview until all branches of the thread are read. What I don't like is the "From" behavior showing a varying number of senders depending on what's read vs. not. Instead, I'd like to see "From" show all the senders on the thread, in order of recency (most recent branches should show up at the front of From). Extra credit if unread senders show up bold and read senders unbold, but I'd also be OK with all senders showing up bold if the mixed boldness is too hard.
3. try double-clicking on the name (the top line) of an expanded conversation. the double-click doesn't do anything. it should collapse the conversation-- the reverse of what happens when you double-click on a collapsed conversation.
4. doesn't matter now that I have a solution for #1! :-)
5. not a big deal now that I have a solution for #1.
6. This was a bad choice for cleanup: reply is the probably most common (after delete!) operation you want to do on a conversation! Certainly more common than printing or quick steps or the other random things remaining in that context menu. Anyway, thanks for the tip-- I always use right-click for replies, didn't think to use keyboard.
> FWIW, most people don't like the conversation view.
Hmmm. Now that I know about the keyboard no-expand setting, I like Conversations a lot more! If the Office folks can fix the From field issue (#2 above), then the feature will be, to me at least, good enough for RTM.
But assuming these usability quirks get fixed, I really do need this feature. I get hundreds of messages per day and without Conversations I'd have a much harder time dealing with the incoming load-- this is a feature I've been needing for years. I also really like the ability to see my Sent items on the same Conversation without making a trip to Advanced Find.
FWIW, Conversations (assuming the usability issues get addressed) is literally the only feature of Office 2010 that would justify the upgrade price for me. The other improvements in Outlook and the other Office apps are nice, but Conversations saves me several minutes every day... and that productivity adds up quickly!
Justin Grant

Conversation view useless in Mail

I posted a version of this question before but am asking again as there was no response. Conversation view in Mail only displays the last sender's name in the "From" field. This is very confusing and makes it hard to find messages. If you CC yourself, messages are displayed as "From" you. iOS Mail, various web mail's, and other applications display several senders making it much easier to find the message you are looking for. Am I the only one who sees this as a flaw? I like Mail but this is a deal breaker for work email. I have to use the web mail interface (which displays multiple senders in conversation view) and is actually OK.
--David

I did a little more research into this.
It seems that this problem has troubled people even before Yosemite. For some reason Apple's not getting the definition of a thread correctly (OK, it might be tricky but still...) and it's just getting worse instead of better. In my case Yosemite's Mail is joining threads that are obviously unrelated. Somebody there needs to put some "I" into their "AI"...
Yes, if you uncheck the "include related emails" then your replies are taken out of the conversation which is annoying.
I wish they would add an option to specify to Mail: this email is not part of the conversation and alternatively this email is.
As a bandaid I customized the toolbar adding the "Conversation" and "Show/Hide Related Messages" icons. Most of the time I set both to off. When I quickly want to look at the whole thread I click the "Show/Hide" icon (and yes, it still brings unrelated messages if those were added to the thread) and/or the "Conversation" icon. It's not elegant but it works in the sense that I can see the whole thread when I need to and I don't risk missing any messages as mentioned above.

Can we add conversation view in e 71

Similar Messages

Maybe you are looking for