Can we add fields from structure while enhancing datasource

Hello all,
I am trying to enhance a SAP delivered datasource. Is it possible to add fields from a logical database structure or do we have to add fields only from a table.
Is the procedure the same.
Thanks a lot

hi KM,
you want to drop all the added fields or some ?
go to the extract structure screen,
rsa2->type in your datasource name, double click the
extraction structure, to delete some fields, click append structure, in next screen mark the fields and sign '-'.
to delete the append structure, check this
How to delete append structure
Delete append structure with a long name
hope this helps.

Similar Messages

  • Add field from structure maintanace option for datasource in LBWE (BI 7)

    Hi,
    while i try to add extra field (transaction:LBWE for data source(ex 2lis_02_itm)) from structure maintance option to add field from structure(MCEKKO) to res data source(MC02M_0ITM) , than it moves to left side but when make enter message comes that it will not populated in extrect structure(i.e in MC02M_0ITM OR RSA2),
    but when we try to add extra field not by structure maintanace option in LBWE but form append structure option from that structure MC02M_0ITM ( that field is not in that maintanace option in LBWE) than it comes in that structure MC02M_0ITM and also can see in RSA2.
    Than how can we use that structure maintanace option avialble for the res. data source in LBWE?
    Best regards,
    dushyant.

    It solved automaticaly,
    yes later i got that error entry still exit whic solved by deleting setup table and than try,
    thanks.
    one another problem: when i try to activate 0order_quan key figure for cube 0pur_c01 for data source 2lis_02_itm at update rulen by assignig source field for that key figure , i am unable to activate - its remain in warning symbol only and getting further message while check that Target unit and source unit for key figure Order quantity are different.
    Best Regards,
    dushyant.

  • Unable to add field from structure maintanace opt for datasource(LBWE BI 7)

    Hi,
    while i try to add extra field (transaction:LBWE for data source(ex 2lis_02_itm)) from structure maintance option to add field from structure(MCEKKO) to res data source(MC02M_0ITM) , than it moves to left side but when make enter message comes that it will not populated in extrect structure(i.e in MC02M_0ITM OR RSA2),
    but when we try to add extra field other than with that structure maintanace form append structure option from that structure MC02M_0ITM than it comes in that structure MC02M_0ITM and also can see in RSA2.
    Than how can we use that structure maintanace option avialble for the res. data source in LBWE?
    Best regards,
    dushyant.

    It solved automaticaly,
    yes later i got that error entry still exit whic solved by deleting setup table and than try,
    thanks.
    one another problem: when i try to activate 0order_quan key figure for cube 0pur_c01 for data source 2lis_02_itm at update rulen by assignig source field for that key figure , i am unable to activate - its remain in warning symbol only and getting further message while check that Target unit and source unit for key figure Order quantity are different.
    Best Regards,
    dushyant.

  • Cant add field from structure maintanace option for  datasource(LBWE BI 7)

    Hi,
    while i try to add extra field (transaction:LBWE for data source(ex 2lis_02_itm)) from structure maintance option to add field from structure(MCEKKO) to res data source(MC02M_0ITM) , than it moves to left side but when make enter message comes that it will not populated in extrect structure(i.e in MC02M_0ITM OR RSA2),
    but when we try to add extra field other than with that structure maintanace form append structure option from that structure MC02M_0ITM than it comes in that structure MC02M_0ITM and also can see in RSA2.
    Than how can we use that structure maintanace option avialble for the res. data source in LBWE?
    Best regards,
    dushyant.

    It solved automaticaly,
    yes later i got that error entry still exit whic solved by deleting setup table and than try,
    thanks.
    one another problem: when i try to activate 0order_quan key figure for cube 0pur_c01 for data source 2lis_02_itm at update rulen by assignig source field for that key figure , i am unable to activate - its remain in warning symbol only and getting further message while check that Target unit and source unit for key figure Order quantity are different.
    Best Regards,
    dushyant.

  • CNMASS - Ability to apply custom fields from structure CI_PROJ

    Hi,
    Is there a way to add fields from the Customer Enhancment tab in structures CI_PROJ, CI_PRPS to CNAMSS transaction?
    thanks,
    Cathy

    Hi,
    I have the same problem. I want to change a customer field (from structure CI_PROJ) via trx CNMASS. But the fields of structure CI_PROJ are not provided.
    Is there a standard possibility to extend the table CNMASS_PROJECT_DEFINITION with the structure CI_PROJ? I donu2019t want to modify the SAP table CNMASS_PROJECT_DEFINITION.
    Of course I know that I can write a program ore use trx LSMW but I'm looking for a more suitable and comfortable solution.
    @Cathy: did you find a solution in standard?
    Thanks in advance for any hint!

  • Add Fields from table ADRC (Fields Name 1 to 4) for Open Item Processing

    Hi SAP Expert:
    Our client requires vendor/customer name to be displayed in the open item processing line layout for transaction code f-58, so they can double check if the vendor name is complete as intended. 
    We intend to add fields from table ADRC instead of REGUH since the characters in maintaining vendor/customer name is 40 characters and REGUH - ZNME1s are only 35 characters. 
    We have managed to add fields from ADRC and change the SAPDF05X program and were able to display the names in open item layout, except that the program seems to "automatically" create a generic table which only carries 30 characters of the vendor/customer name.  The source table should be RFOPS_DK but the program automatically looks up from table RFOPS_GEN for the particular fields - Name 1 to 4.  Is there a way to "instruct" the program to use RFOPS_DK instead of RFOPS_GEN?
    Hope this will merit somebody's attention... Thanks !!!

    Thanks,  i have assigned the layout via o7v3,  it is the program that i have a problem with,  actually another program that we change is the program MF05BFPO where it generates data to be displayed in the FBZ4 screen,  though we add a field with 40 characters (ADRC Name 1 to 4)  what the program dispalys is a 30 character Name1 to 4 from structure RFOPS_GEN. 
    My question is can i extend/change the structure RFOP_GEN to 40 characters,  is there any SAP standard program that will aftected if i do so?  thank very much...
    Lorena

  • How can i add field to screen exit ?

    ver 4.7
    trans.  me21n
    add field in screen exit .
    i implement screen exit MM06E005->SAPMM06E->0111
    in the layout i try to add field  by pressing
    button in the toolbar ( dictionary field window ) ,
    but when i press "save" in me21n  ,
    i get message "No data changed".
    i choose in the dialog window
    field from structure "ci_ekpodb" , field that i already
    been add  .
    thanks .

    Hi
    You have to implement the exit to import/export the data into/from screen-exit:
    EXIT_SAPMM06E_016 and EXIT_SAPMM06E_018
    Max

  • How can I add contacts from my computer to my Icloud?

    How can I add contacts from my computer to my Icloud?

    http://help.apple.com/icloud/?lang=en#mmfba7481b

  • Old laptop stolen, can't add music from new laptop to iPhone

    Basically, my old laptop was stolen out of my car, so bought a new one. I've put all my backed up music onto my new laptop, but can't add music from my new laptop to my iPhone. I've deauthorised my old laptop and authorised my new one, but iTunes wont let me drag music across into my iPhone. What do I need to do to add music to the phone?

    See Recover your iTunes library from your iPod or iOS device.
    tt2

  • Can you add vids from a camra to Ipad

    Can you add vids from camra to ipad 2 (to make vids on imovie)

    surely. You need to sync the files to your camera-roll in iOS, use itunes/iphoto. IMovie in iOS can access all videos that are in the camera-roll ( photos.app ) .
    The Apple iPad camera connection kit will also be a big help  : With it you can insert a digital cameras SD-Card into the iPad and mass-import the footage . Using this you avoid the iTunes/PC/OSX procedure to load material into the ipad.

  • Can i add tunes from multiple computers to cloud

    How can i add music from 3 different i tunes on 3 separate PC computers?

    How can i add music from 3 different i tunes on 3 separate PC computers?

  • How can we add field PRCT Grp to FBL3N T.code or is it possible through cus

    Hi,
        Can we add field profit center group in FBL3N T.CODE. I know profit center is already exist, but is there any way to add this field i.e profit center group in the above t.code(fFBL3N).
    or
    Is there any other Transaction code which is similar to FBL3N and also gives us the details of profit center group.
    Thanks & regards,

    Hi,
    if you click in the dynamic selection button, you will be able to specify the profit center you wish.
    The profit center is found directly in the 'Document' part.
    Please check and if happy give POINTS.

  • How can i add character from RSKC?

    Hi Experts,
    can anybody epalin wht is the use of transaction  RSKC. and How can i add character  from RSKC?
    please explain step by step..
    Thnx in advance,

    RSKC transaction is whenever you want to allow special characters in your data.
    If they are not entered in RSKC then your data load fails because of these characters.
    So whichever characters you want to allow, you need to mention over there...
    Usually the standard list is as below :
    '~!"%&''()+,-./:;<=>?#_$@0123456789ABCDEFGHIJKLMNOPQRSTUVWXYZ "^`['

  • Can I store photos from ipad while travelling for later download to my mac desktop

    can I store photos from ipad while travelling for later download to my mac desktop

    If you mean by using photo stream, you can but iCloud only keeps photo stream photos for 30 days.  You will need to download them to your Mac during this 30 day window or they will no longer be available.
    Or, just leave the photos in the camera roll on your iPad until you return, then import them to iPHoto on your Mac as explained here: http://support.apple.com/kb/HT4083.

  • Can I add fields into ACS 5.4 Certificate Dictionary?

    Hi,
    I need to check values in field that is not available in the ACS 5.4 certificate dictionary...
    Can I add fields to it, or is it static?
    Thanks,
    Naor.

    Hello Naor-
    You can edit some of the built-in attributes but you can also add your own/custom attributes. Go to > System Administration > Configuration > Dictionaries > Protocol
    Thank you for rating helpful posts!

Maybe you are looking for