Can we add graphic card to macbook pro late 2011

can we add graphic card to macbook pro late 2011

I'm sorry, but you can only replace the hard drive and the RAM. The rest of the hardware is soldered onto the logic board, so it's not possible to replace it

Similar Messages

  • Graphic card problem, macbook pro late 2011

    My macbook pro screen just started flickering for a few seconds every time i start it up since i plugged a mini display to hdmi to it. Could this be related to the hdmi cable or tv i used? Should i be worried since it only flickers for a few seconds a startup?

    Thanks Andy, but I am in Ireland. So don´t know if the laws in UK would help. But seems like the only option I have now is to rball the Graphic Chip.
    Has any of u guys in the club taken action against Apple?

  • Graphic problems with Macbook Pro Late 2011 13"

    I'll try to explain it as clear as possible. This started to happen a couple weeks ago:
    My Macbook screen started to being white-blurred, and the image slows down while this happen. At first I thought that was happening randomly, but then -I guess- I realised that it was lid-related; when I open the lid more than 90 degrees the problem started to happen, sometimes it starts to happen even if the lid is in its 'working fine area' though , but after moving the lid up and down several times, it gets 'fixed'... until it happens again. There are times when it doesn't get fixed instantaneously, and it's really driving me crazy.
    My first thought was that it might be the flex (not sure if this is the right name of it tough), I mean the cable that goes from the screen to the logic board. If so, or even in another case scenario, I have an Early 2011 Macbook Pro 13" where I can use any part, except for the logic board, if needed.
    Thanks in advance.

    Well the Apple logo will always be visible through the screen when there is a fairly bright light behind the screen.
    That is totally normal.
    As for the freezing and since this is your first Mac computer I would like to make you aware of one thing.
    The way Mac OS X operating system works is slightly different then Windows. In Windows when you click the X in the upper right hand corner of the program you are using that program closes freeinig up the memory it was using. In the Apple OS, OS X, when you click the X in the upper left hand corner of the windows you are using all that does is close that active window. It dos not close the program. So if you have started up 2-3-4-5-6 programs to do something in them and then clicked the X all you have done is closed those windows for all those programs. The programs is still running. So you can end up with several programs using memory when they shouldn't be. You have to actually close those program by first using Command+Tab to see what programs are still open then go to the menu bar on the right side where the name of the program is displayed and click on that name and select Quit Program Name. Or once the name of the program is in the menu bar press Command+Q (Quit) to close that program.
    Get in the habbit of always using that keyboard shortcut when you are done using a program.
    Having multiple program open will cause the system to run slow.
    The hard drive Apple is putting the newer Macbook Pros are of the slower type. Running at 5400RPMs as opposed to the faster 7200RPM models. Why I don't know as the faster drives don't cost that much more. Because of this all program run slightly slower. To open, to save files to and when used as a swap disk to expand on the physical memory in the computer. Which in turn will make the system seem sluggish and can casue some freezes.
    So make sure you have closed all programs before opening another, and only have at the most 2-3 progams open at the same time.

  • How can I transfer data (iTunes/iPhoto) MacBook Pro (Late 2011) to my brand new iMac 27" - Apple Support couldn't help me and did not make the promised call-back

    I have a late 2011 MacBook Pro 13" and bought a brand new iMac 27" last week.
    I tried to transfer data (musdic & photos) via Thunderbolt, but i did not run, my system always
    tries to transfer data via WLAN, but that would last more than 80 hours.
    I tried to get some help from the Apple Support, but unfortunately they couldn't help me.
    A promised call-back from the next higher support-level has not been done.
    Does anybody know what the problem might be.
    The Thunderbolt-cable is brand new.

    Instead of using Migration Assistant, the best way is to use the Target Disk Mode, so you will save headaches (Migration Assistant creates a new user with the transferred data).
    To do this, just connect both Macs with the Thunderbolt cable, and then, start the MacBook Pro holding the T key, so a Thunderbolt or FireWire icon should appear on the display. After that, go to the iMac, open Finder, and the hard drive of the MacBook Pro will appear on the Finder sidebar as an external drive, under "Devices". Just access to it, go to the folders with your iTunes and iPhoto libraries, and copy them to the iMac

  • Can we add external graphic card on macbook pro

    can we add graphic card to my macbook pro late 2011
    i7 processor

    Not yet, no. MSI is showing an early demonstration of a Thunderbolt peripheral that will host an external graphics card, so there may be a solution eventually though it currently is Windows-only. See:
    http://www.anandtech.com/show/5352/msis-gus-ii-external-gpu-via-thunderbolt
    Regards.

  • HT3249 Can the graphics card of MacBook pro be customized?

    Can the graphics card of MacBook pro be customized?

    Only at the point of ordering from the Apple store. Select the required Video card at that point, because it can't be changed later.
    Stedman

  • How will i increase the shared memory of the graphic card of macbook pro 13-inch, early 2011 from 4gb memory?

    how will i increase the shared memory of the graphic card of macbook pro 13-inch, early 2011 from 4gb memory?

    The current version of Mavericks is 10.9.4. To update yours download and install OS X Mavericks 10.9.4 Update (Combo).
    You can upgrade RAM to the maximum your model will support. That would be:
    Maximum Memory
    16 GB (Actual) 8 GB (Apple)
    Memory Slots
    2 - 204-pin PC-10600 (1333 MHz) DDR3 SO-DIMM
    About OS X Memory Management and Usage
    Using Activity Monitor to read System Memory & determine how much RAM is used
    OS X Mavericks- About Activity Monitor
    Adding RAM only makes it possible to run more programs concurrently.  It doesn't speed up the computer nor make games run faster.  What it can do is prevent the system from having to use disk-based VM when it runs out of RAM because you are trying to run too many applications concurrently or using applications that are extremely RAM dependent.  It will improve the performance of applications that run mostly in RAM or when loading programs.

  • MacBook Pro (Late 2011) Graphics Card issue; shall I keep it?

    Hi there,
    I've recently bought a MacBook Pro (Late 2011) second hand from someone on eBay, it's going to be delivered in a couple days.
    Now, after the purchase, I did some research into the production year - I know, I should've done it before really - and found a huge amount of people with the very-known issue of the Graphics card. The issue causes massive visual problems and has, on many occasions, resulted in a replaced Logic Board.
    I'd like to know whether you think that this machine is a safe one to keep, or if I should send it back and try and get one from a different year?
    The seller said, once I asked him about it, that the previous owner (obviously someone has had it before him) apparently had a few issues, but he himself hasn't, and is using Mavericks.
    What do you think?

    Not ALL of the 15" and 17" models have had a problem with the soldering of the GPU - maybe 20,000 at the most (based on the information that I've been gathering and some of those may be reports on the same machine). It's possible that yours may be  good one.
    However... I wouldn't take the chance, were it me. I've only had my logic board replaced once and it's been almost 11 months now and my machine is still working. But I'm sure that the problem will surface again (after my AppleCare runs out in 2015!) so I've decided to become less Mac-dependent in the future.
    If I were you, I would just tell the seller that you're not comfortable buying a 2011 model with the discrete GPUs (the 13" models are just fine) and would shop Apple's refurbished section, looking for a non-Retina 2012 model.
    My opinion...
    Clinton
    MacBook Pro (15” Late 2011), OS X Yosemite 10.10, 16GB Crucial RAM, 960GB M500 Crucial SSD, 27” Apple Thunderbolt Display

  • Can I add Thai language to MacBook Pro's keyboard? if yes how many cost do I spend?

    Can I add Thai language to MacBook Pro's keyboard? if yes how many cost do I spend?

    patKPchamp wrote:
    Can I add Thai language to MacBook Pro's keyboard? if yes how many cost do I spend?
    If you are talking about having Thai characters engraved on the physical keys,  you will need to contact some company which does that.  Or find a company that can send you a Thai keyboard to replace the one you have.

  • Graphic problem in 13'' macbook pro late 2011

    I have problem with my 13'' i7 macbook pro (late 2011) . for instance when i swipe up/down with 4 fingers, my apps or docs minimize So logy and slowly as well as when i want full screen my browser or other application, it do it very bad with some vibration and i dont know what do i have to do?
    is this problem for my graphic card or is for Lion ios?
    as the matter of fact , i bough this mac 2 months ago.
    Im wondering if someone can help me in this regard!

    Since it is less than a year old call AppleCare: 800-SOS-APPL (in the US).
    Have your Mac's serial number ready: http://support.apple.com/kb/HT1349
    After you wait on hold for a very long time they ask you some frustratingly basic questions like is it charged and did you spill water on it etc., they will talk you through some basic troubleshooting such as an SMC reset. In the end they will offer to schedule an appointment at a Genius Bar where they will fix whatever is wrong. It won't cost you anything (unless you spilled water on it etc).
    You can do all this yourself:
    SMC reset:
    Resetting the SMC on portables with a battery you should not remove on your own
    Shut down the computer.
    Plug in the MagSafe power adapter to a power source, connecting it to the Mac if its not already connected.
    On the built-in keyboard, press the (left side) Shift-Control-Option keys and the power button at the same time.
    Release all the keys and the power button at the same time.
    Press the power button to turn on the computer.
    Genius Bar Reservations:
    http://www.apple.com/retail/geniusbar/
    You can test the hardware yourself also, if it reports something wrong tell them what it is.
    Using Apple Hardware Test:
    http://support.apple.com/kb/HT1509 

  • I got a new 25" LG ultra wide monitor and would love to use it with my macbook pro Late 2011. I can't get the resolution to the recommended 2560x1080. Can anyone help?

    I got a new 25" LG ultra wide monitor and would love to use it with my macbook pro Late 2011. I can't get the resolution to the recommended 2560x1080. Can anyone help?

    I found a similar question on Amazon: http://www.amazon.com/2560x1080-resolution-macbook-resolution-option-/forum/Fx15 6DUSW1J104N/Tx14L2NHT4Y3F8K/1/ref=cm_cd_ql_tlc_al?_encoding=UTF8&asin=B00JM99DIU
    It looks like you may need a mini-displayport to Displayport cable. You can also try holding the option key while clicking on "scaled" to see if the option you need comes up.
    ~Lyssa

  • I have a Lexmark X1185, but I do not have the driver CD that came along with it. I have a 15" MacBook Pro (Late 2011) and I cannot seem to find drivers for OSX Lion.. Where can I find the drivers?

    I have a Lexmark X1185, but I do not have the driver CD that came along with it. I have a 15" MacBook Pro (Late 2011) and I cannot seem to find drivers for OSX Lion.. Where can I find the drivers? Thank you for the help!

    Have you looked on Lexmark's support site?
    http://support.lexmark.com/index?page=content&id=OS23&locale=en&userlocale=EN_US

  • Macbook pro late 2011, completely messed up, everything I click it brings up beachball very slow, blue ray and hd unwatchable as it jerks. genius bar app didnt help at all, very disappointed, can some1 help me?

    Macbook pro late 2011, completely messed up, a macbook pro of this year should not be operating like this, everything I click it brings up beachball very slow, blue ray and hd unwatchable as it jerks. genius bar app didnt help at all, very disappointed, can some1 help me?

    You have a hardware problem. It is probably the hard drive is either to full, not enough free space, or it is starting to fail.
    If you have an external drive connec that to the system and use the Recovery HD, Command + r keys at startup, to install a clean fresh copy of OS X Lion on the external then run the system from that. It will be slower but if you don't get the beachball then that is the sign your internal drive is on its way out or is filled up with files and not enough free space.

  • MacBook Pro late 2011 not switching to ATI graphics when running off mains power.

    Hi there.
    My MacBook Pro late 2011 doesn't appear to be switching to ATI graphics when running off mains power. It always seems to stay on the Intel adapter instead. I've checked the option in the energy saver settings and it's ticked to "Automatically switch..." and when I untick this box, it switches to ATI and stays that way even when running on battery (as expected). Either way it will not switch to ATI graphics when plugged into mains unless forced to in this way.
    Any one else seen this? Very frustrating when trying to run an external monitor with the Intel adapter!
    Thanks in advance.
    Dan

    "As a last resort I opened the bottom cover and disconnected the battery power plug (MagSafe adapter also disconnected)."
    After everything was disconnected did you press the power button and walk away for 5 minutes? Try that, just had one restart after waiting for that long.

  • HT201343 how can i use airplay in my MacBook Pro late 2008?

    Somebody can tell me how can i use AirPlay on my MacBook Pro late 2008?

    On your MacBook: Apple Menu > System Preferences > iCloud > place a checkmark in front of Contacts
    On your iPhone: Settings > iCloud > turn Contacts to on

Maybe you are looking for

  • Clearing out old files

    Hi there... I'm brand new to these forums so if I am being totally redundant here, please excuse. I have a PowerBook G4 that is just about 6 months past the extended Applecare Protection plan. Model Name: PowerBook G4 15" Model Identifier: PowerBook5

  • Importing of PSDs and others

    I have a large number of older (pre digital camera) image files organized in the finder. When navigating to these folders via Aperture/import many, many of the image files do not even show up. Of course, many of these files are layered PSDs and/or va

  • Wrong date on calendar and won't open

    My macbook pro calendar will not open and the date is incorrect. The day and time at the top bar is correct. How do I fix this?

  • Color Management via Dynamic link

    Hey guys. I know I don't know too much about color management right now, but a read a handy article linked from this forum that suggested that all comps should be set to a 32 bit (or 16) linearized workflow with the sRGB 2.1 working space. So far I h

  • Out of no where I have a "acaaaa" under my FireFox desk top icon .... ???? What is this ????

    Out of nowhere I have an "acaaaa" under my FireFox desk top icon ..... What happened ?????