Can we add links to perform editing, modify properties in KM Report output?
Hello,
I have created KM report which provides list of XML forms which satisfy specific conditions. Now I want to add links on report output so that user can click on that link and can directly start editing documents if needed. Also I want to provide direct link which can open properties of document.
Also can we add images/ icons on a particular row like traffic lights icons: Green, Yellow, Red.
Thank you,
Nitesh Shelar
I have another question related to following class may be that can put more light on my base requirement. I am creating Result item object based on details I found on various KM articles for KM reports. I wonder what is that List executedCommands, object.
public static ResultItem getInstance(RID rid,
Map properties,
List executedCommands,
boolean hadError,
String statusDescription)
Can any one tell me about this List executedCommands and what exactly I should pass there and how it is going to affect my output?
Similar Messages
-
How can I add a hyperlink to a PDF with OSX 10.9? The "Help" article says to use the "add link" feature under "edit." It's not there. I could add links w/ the previous OS. Time sensitive project.
Which application are you using?
Clinton -
I can't add a contact or edit contacts the little + sign is no longer on my phone...same thing on my iCalendar. I can no longer add events or dates. how do I fix this?
Reset your phone, hold the home and off button down until the apple symbol comes up. If that doesnt fix it then you need to restore your phone in itunes, Connect to itunes, right click on your phones name to the left, then click restore from backup. That providing you have backed up your phone recently.
-
Hi,
I would like to know as to how can I add links to open xml and csv files stored in another location? Please advice how to place links in my frame maker document?
Kindly advice.
Thanks
PriyaSpecial > Hypertext > Command "open document" will do its best to open the target document inside FrameMaker, which may not be much help; Special > Hypertext > Command "message …" will use the application you specify. The user guide for 7.0 says this about absolute links, and I don't think anything has changed since:
For example, to start PaintBrush and open the Ship.pcx file on drive C you would use the command message system pbrush.exe C:/Ship.pcx
I've not often used a relative link, and not recently: the same source says
folder levels are separated by a slash / even in Windows and Mac
[relative links] FrameMaker searches for a relative pathname beginning in the folder that contains the current document
[absolute links] FrameMaker searches for an absolute pathname beginning at the top of the file system. In Windows, the absolute pathname begins with the drive specifier, a colon and a slash. -
How can I add linked text boxes to Contents?
I have a lot of sections in my chapters, and I think they are all coming in to the TOC, but the automatic text box doesn't have a blue tab, so I cannot add a new text box to continue showing the sections. How can I make this show up? There's no layout I can manipulate for the TOC, so I cannot make the text editable, which is the suggestion that I have seen for regular linked text boxes.
Hello,
If you want to add image to it's background then you can select the SubMenu and use the fill option to fill an image to it.
Make sure you uncheck "Edit together" option in Menu properties so that you can add different images to different submenus.
And if you want to edit the text and add images to it, I would suggest you to use Manual menu. Where you can customize your own Menu and add links to the Menus and Submenus.
Please have a look at the screenshot showing how to create Manual menu :
Hope this helps.
Regards,
Sachin -
How can i add link to web in an applicaion(Urgent)
Hi
I want to add link in an application mean when user click on this link it open a browser and goes to that address. I want to do that thing in JFrame.plz help me.The main issue was HTML5 attributes and the editor is that valid HTML5 attributes can be really anything you want so it's not really possible to test everything only patterns and types of code which is what I assumed your test was.
For example:
<a test test test test test test=123 test="test">
while not very useful it is valid -
Hi !
Sir I have some questions regarding word report generation using(C language in labwindows) Please.
1.How can i add border to a word page?.
2.How can i add border and grid lines to a table generated in word report(Not the " cvi table control" inserted from gui,i am asking about the table generated in word report)?
3.How can i fill a cell of word report table withe the data type other than "character"?.
And sir one question about use of timer in cvi labwindows please.
Sir i'm trying to set minimum delay interval of timer control to 1millisecond(0.001s),as i set ,timer don't cares of the interval that is set by me it responds only to the default minimum time interval which is i think 10milliseconds(i'am using windows xp service pack3 version 2002).
Regards
Imran
Pakistan
Solved!
Go to Solution.Hello sir!
Sir i'm using daq6251.But Sir before implimenting it to my final application now i'm just trying to achieve 1millisecond time interval for timer in a vary simple programe i mean at this time no hardware (daq device) is involved i,m just trying to achieve minimum time interval of 1millisecond.
Sir i read form "help" of labwindows how this time interval can be set,i'm trying for,as described in help notes but i could'nt.I'm attaching a screen shot sir for you it may helpful for you to explain me.
And sir also waiting for your kind reply regarding word report generation.
Thanks.
Imran.
Attachments:
screen_shot_rigistry.docx 65 KB -
Can you add links to drop down menus?
Hi,
I don't use Contribute, but my sister does and is trying to
add a link to a menu drop down.
Is this possible through Contribute? If so, how?
Thanks for any help anyone can offer.
I'm kind of thinking you can't, as their doesn't appear to be
any info anywhere on the web or in
a user manual about this.
h. :)Tested this, but does not seem to work. I don't think it's a
good solution either. Whene you have a large menu you would need
many editable regions. Better create a list-style menu (ul, li) and
use CSS to make it look right. You can then include the list-menu
in your pages using PHP ( <?php include("menu.php"); ?> ) and
update the menu by updating the include file. -
Acrobat Pro Extended - how can I add links to 3D-objects?
Hi there,
I'm using Acrobat Pro Extended 9.0 and I would like to attach links to different filetypes to a 3D-object in a 3D-PDF. I tried to use the link-tool but it seems like that only works for 2D-PDF. Also in the 3D-Reviewer I haven't found a way yet to make it work.
Thanks
what evaIt's possible, but not in the simple tools-based way.
The "easiest" way is to add a Javascript to the 3D annotation which hooks the mouse event, scans the event.hits array and reacts based on the contents. If a mesh object is clicked the hits array will contain the mesh name in position 0 (then everything behind it in order). Your only issues arise when you want the "normal" clicking action to work as well (for selecting nodes, etc.), in which case you have to ensure your script passes the events about.
Many of the example files on the acrobatusers.com 3D gallery use that principle, and there are also some in the adobe.com section on 3D Javascript. The idea of a '3D linking tool' is a loooong way off - the way 3D is handled by Acrobat isn't set up to understand things at that level - the UI sees the 3D model as nothing but a black box that can be shouted at. -
Can't Add User to Professional Edition Account
I have created a new single-edition iPad app and ready to build the App with DPS APP Builder and submit to Apple.
When I go to DPS Account Management, to add the user (Adobe ID created specifically for this project), I get this alert that the user can't be added.
My guess is that I should have added this Adobe ID before I started building the folio.
When I try to build the app from InDesign Folio Builder...Create App, it appears that I need to activate the app with a purchased serial number.
How do I get this Folio to work with my professional account?
Thanks!You've run into a quirky problem with account administration. When you verify an Adobe ID to work with DPS, you effectively make it a master account, and you cannot convert a master account to a delegate account. That's why the error message is telling you to create a new account. Of course, that means you'll need to transfer the folios from the original Adobe ID to the new account you choose. After you create the new delegate account, there are two ways to do this:
* Create a new folio in the new account, and import the articles. This works well if your folder structure is set up properly and you're using a sidecar.xml file.
* Create a new folio in the new account. and share the folio from the old account to the new one. Then use the Copy To command to copy the articles to the new folio.
Also, with a Professional account, it's better to avoid using the Create App method to publish a folio. Log in directly to DPS App Builder using an Adobe ID with a DPS App Builder role. Create App is primarily for Single Edition users. -
I was curious about making an interactive website using Edge. Can you create symbols or text and give their click action a URL to take the user to?
Yes. Easy with code snippets.
On Tue, Sep 16, 2014 at 6:13 PM, sketchlex <[email protected]> -
How can I add a new field in selection screen for this report
*& Report ZGS_BARKODLA_HIZLI_GIRIS
report zgs_barkodla_hizli_giris.
tables: mara,
mseg,
mch1,
*mch1,
mkpf,
mchb ,
makt.
type-pools: esp1.
data: i_message_tab type esp1_message_tab_type,
wa_message_tab type esp1_message_wa_type ,
sc_count type i.
ALV
type-pools: slis, kkblo.
data: gs_layout type slis_layout_alv ,
gt_fldcat type slis_t_fieldcat_alv with header line,
gt_header type slis_t_listheader with header line,
gt_sortin type slis_t_sortinfo_alv with header line,
g_repid like sy-repid .
define add-fieldcat.
gt_fldcat-fieldname = &1.
gt_fldcat-ref_tabname = &2.
gt_fldcat-seltext_s = &3.
gt_fldcat-seltext_m = &3.
gt_fldcat-seltext_l = &3.
gt_fldcat-reptext_ddic = &3.
gt_fldcat-ddictxt = 'M'.
append gt_fldcat.
clear gt_fldcat.
end-of-definition.
types: begin of titab,
sel type xfeld,
matnr type matnr,
maktx type maktx,
charg type charg_d,
menge type menge_d,
erfmg type erfmg,
end of titab.
data : witab type titab.
data : itab type table of titab.
data : ok_code type sy-ucomm.
controls: tc_itab type tableview using screen 0100.
data: gv_header like bapi2017_gm_head_01,
gv_code like bapi2017_gm_code.
BAPI export parameters
data: gv_headret type bapi2017_gm_head_ret,
gv_matdoc type bapi2017_gm_head_ret-mat_doc,
gv_matyear type bapi2017_gm_head_ret-doc_year.
data : lv_objek like inob-objek .
data : ls_inob like inob .
data : imseg type ty_t_mseg.
data : wmseg type mseg.
data : answer.
data : count type i.
data : v_atinn type atinn.
BAPI movement details
data: i_goodsmvt_items type bapi2017_gm_item_create occurs 0
with header line.
data: i_return type bapiret2 occurs 0 with header line.
start-of-selection.
call function 'CONVERSION_EXIT_ATINN_INPUT'
exporting
input = 'Z_ORAN'
importing
output = v_atinn.
call screen 100.
*& Module status_0100 OUTPUT
module status_0100 output.
set pf-status '100'.
set titlebar '100'.
mseg-werks = 1000.
mseg-umwrk = 1000.
**added
sc_count = sc_count + 1.
if sc_count eq 1.
mseg-bwart = 313.
endif.
mkpf-budat = sy-datum.
**added
describe table itab lines tc_itab-lines.
endmodule. " status_0100 OUTPUT
*& Module user_command_0100 INPUT
module user_command_0100 input.
data field(20).
data: line_t like sy-index.
data: lines like sy-index.
data line_count like sy-loopc.
data: begin of cols,
screen like screen,
index type i,
selected(1) type c,
vislength like icon-oleng,
invisible(1) type c,
end of cols.
case ok_code.
when 'DELE'.
delete itab where sel eq 'X'.
when 'ENTE'.
check *mch1-charg is not initial.
read table itab into witab with key charg = *mch1-charg.
if not sy-subrc is initial.
witab-charg = *mch1-charg.
select single matnr from mch1 into witab-matnr
where charg eq witab-charg.
if not syst-subrc is initial.
set cursor field '*MCH1-CHARG'.
message e115(12) with *mch1-charg.
endif.
select single maktx from makt into witab-maktx
where matnr eq witab-matnr
and spras eq syst-langu.
witab-erfmg = 1.
concatenate witab-matnr witab-charg into lv_objek .
clear ls_inob .
select single * into ls_inob
from inob
where objek = lv_objek and
klart = '023' and
obtab = 'MCH1' .
select single atflv from ausp into witab-menge
where objek = ls_inob-cuobj and
klart = '023' .
append witab to itab.
**added
clear *mch1-charg.
**added
endif.
when 'SAVE'.
if mkpf-budat is initial.
set cursor field 'MKPF-BUDAT'.
message e055(00).
endif.
if mseg-lgort is initial.
set cursor field 'MSEG-LGORT'.
message e055(00).
endif.
if mseg-umlgo is initial.
set cursor field 'MSEG-UMLGO'.
message e055(00).
endif.
if mseg-bwart is initial.
set cursor field 'MSEG-BWART'.
message e055(00).
endif.
refresh imseg.
loop at itab into witab.
move-corresponding witab to wmseg.
append wmseg to imseg.
endloop.
call function 'ZMM_POPUP_WITH_DATA'
exporting
imseg = imseg
importing
answer = answer.
if answer eq 'Y'.
perform create_goods_movement.
endif.
when 'P--'.
clear ok_code.
perform paging using 'P--'.
set cursor field 'MARA-MATNR' line 1.
when 'P-'.
clear ok_code.
perform paging using 'P-'.
set cursor field 'MARA-MATNR' line 1.
when 'P+'.
clear ok_code.
clear lines.
perform paging using 'P+'.
set cursor field 'MARA-MATNR' line 1.
when 'P++'.
clear ok_code.
perform paging using 'P++'.
set cursor field 'MARA-MATNR' line 1.
when 'SORA'.
read table tc_itab-cols into cols with key selected = 'X'.
if sy-subrc is initial.
field = cols-screen.
field = field+5(10).
sort itab ascending by (field).
endif.
when 'SORZ'.
read table tc_itab-cols into cols with key selected = 'X'.
if sy-subrc is initial.
field = cols-screen.
field = field+5(10).
sort itab descending by (field).
endif.
when 'PRNT'.
perform write_alv.
endcase.
endmodule. " user_command_0100 INPUT
*& Module read_table OUTPUT
module read_table output.
mara-matnr = witab-matnr.
makt-maktx = witab-maktx.
mch1-charg = witab-charg.
mseg-menge = witab-menge.
mseg-erfmg = witab-erfmg.
line_count = sy-loopc.
endmodule. " read_table OUTPUT
*& Module write_table INPUT
module write_table input.
witab-matnr = mara-matnr.
witab-maktx = makt-maktx.
witab-charg = mch1-charg.
witab-menge = mseg-menge.
witab-erfmg = mseg-erfmg.
modify itab from witab index tc_itab-current_line.
endmodule. " write_table INPUT
*& Module exit INPUT
module exit input.
leave to screen 0 .
endmodule. " exit INPUT
*& Form create_goods_movement
form create_goods_movement .
clear : gv_header, i_return[], i_goodsmvt_items[].
gv_header-doc_date = gv_header-pstng_date = mkpf-budat.
gv_header-pr_uname = sy-uname.
GM with reference to reservation
loop at itab into witab.
i_goodsmvt_items-material = witab-matnr.
i_goodsmvt_items-entry_qnt = witab-erfmg.
i_goodsmvt_items-entry_uom = 'ST'.
i_goodsmvt_items-move_type = mseg-bwart.
i_goodsmvt_items-plant = mseg-werks.
i_goodsmvt_items-stge_loc = mseg-lgort.
i_goodsmvt_items-move_plant = mseg-umwrk.
i_goodsmvt_items-move_stloc = mseg-umlgo.
i_goodsmvt_items-batch = witab-charg.
append i_goodsmvt_items.
endloop.
find BAPI processing transaction
if gv_code is initial.
perform determine_bapi_code using mseg-bwart
changing gv_code.
endif.
call function 'BAPI_GOODSMVT_CREATE'
exporting
goodsmvt_header = gv_header
goodsmvt_code = gv_code
importing
goodsmvt_headret = gv_headret
materialdocument = gv_matdoc
matdocumentyear = gv_matyear
tables
goodsmvt_item = i_goodsmvt_items
return = i_return[].
cancel blocking process
loop at i_return where type eq 'E' or type eq 'A' or type eq 'X'.
exit.
endloop.
if sy-subrc ne 0.
refresh i_message_tab.
call function 'BAPI_TRANSACTION_COMMIT'
exporting
wait = 'X'.
wa_message_tab-msgid = 'M7'..
wa_message_tab-msgty = 'S'.
wa_message_tab-msgno = '060'.
wa_message_tab-msgv1 = gv_matdoc.
wa_message_tab-msgv2 = ''.
wa_message_tab-msgv3 = ''.
wa_message_tab-msgv4 = ''.
append wa_message_tab to i_message_tab.
else.
refresh i_message_tab.
call function 'BAPI_TRANSACTION_ROLLBACK'.
write a message as there is an unexpected error.
loop at i_return.
wa_message_tab-msgid = i_return-id.
wa_message_tab-msgty = i_return-type.
wa_message_tab-msgno = i_return-number.
wa_message_tab-msgv1 = i_return-message_v1.
wa_message_tab-msgv2 = i_return-message_v2.
wa_message_tab-msgv3 = i_return-message_v3.
wa_message_tab-msgv4 = i_return-message_v4.
append wa_message_tab to i_message_tab.
endloop.
endif.
call function 'C14Z_MESSAGES_SHOW_AS_POPUP'
tables
i_message_tab = i_message_tab.
endform. " create_goods_movement
*& Form determine_bapi_code
form determine_bapi_code using p_bwart type bwart
changing p_code type bapi2017_gm_code.
data: lt_t158b type table of t158b with header line.
clear p_code.
select tcode from t158b into corresponding fields of table lt_t158b
where bwart eq p_bwart.
loop at lt_t158b.
select single gmcode from t158g into p_code
where tcode eq lt_t158b-tcode.
if sy-subrc is initial.
exit.
endif.
endloop.
endform. " determine_bapi_code
*& Form paging
form paging using code.
data: i type i,
j type i.
case code.
when 'P--'. tc_itab-top_line = 1.
when 'P-'.
tc_itab-top_line = tc_itab-top_line - line_count.
if tc_itab-top_line le 0.
tc_itab-top_line = 1.
endif.
when 'P+'.
i = tc_itab-top_line + line_count.
j = tc_itab-lines - line_count + 1.
if j le 0.
j = 1.
endif.
if i le j.
tc_itab-top_line = i.
else.
tc_itab-top_line = j.
endif.
when 'P++'.
tc_itab-top_line = tc_itab-lines - line_count + 1.
if tc_itab-top_line le 0.
tc_itab-top_line = 1.
endif.
endcase.
endform. " paging
*& Form write_alv
form write_alv .
perform find_list_header.
perform fill_field_cat.
perform fill_sortinfo.
g_repid = sy-repid.
gs_layout-colwidth_optimize = 'X'.
gs_layout-zebra = 'X'.
answer = 'Y'.
call function 'REUSE_ALV_GRID_DISPLAY'
exporting
i_buffer_active = ''
i_callback_program = g_repid
i_save = 'A'
i_callback_top_of_page = 'TOP_OF_PAGE'
is_layout = gs_layout
it_fieldcat = gt_fldcat[]
it_sort = gt_sortin[]
tables
t_outtab = itab[].
endform. " write_alv
Form find_list_header
form find_list_header.
data : v_datum(10),
v_datlo(10),
v_dathi(10),
v_uzeit(8).
clear: gt_header, gt_header[].
gt_header-typ = 'H'.
gt_header-info = sy-title.
append gt_header.
clear gt_header.
gt_header-typ = 'S'.
gt_header-key = 'Çalıştırma Zamanı : '.
write syst-datum to v_datum.
write syst-uzeit to v_uzeit.
concatenate v_datum '/' v_uzeit into gt_header-info.
append gt_header.
endform. " find_list_header
Form fill_field_cat
form fill_field_cat.
refresh gt_fldcat.
clear gt_fldcat.
gt_fldcat-key = 'X'.
add-fieldcat 'MATNR' 'MARA' ''.
add-fieldcat 'MAKTX' 'MAKT' ''.
add-fieldcat 'CHARG' 'MSEG' ''.
gt_fldcat-do_sum = 'X'.
add-fieldcat 'MEINS' 'MARA' 'Olcu Birimi '.
gt_fldcat-do_sum = 'X'.
add-fieldcat 'ERFMG' 'MSEG' 'Adet'.
endform. " fill_field_cat
Form fill_sortinfo
form fill_sortinfo.
gt_sortin-up = 'X'.
gt_sortin-fieldname = 'MATNR'. append gt_sortin.
endform. " fill_sortinfo
Form top_of_page *
form top_of_page.
call function 'REUSE_ALV_COMMENTARY_WRITE'
exporting
i_logo = 'ZKUTAS'
it_list_commentary = gt_header[].
endform. " top_of_pageHI,
if it is a normal report program then you can directly create a Selection screen field.
After the Type-pool you can use Parameters or Select-options to create the selection screen field..
If it is a Modulpool program then you can create a selection scren field like
SELECTION-SCREEN BEGIN OF SCREEN 1100 AS SUBSCREEN.
PARAMETERS: p1(10) TYPE c.
SELECTION-SCREEN END OF SCREEN 1100.
defines a selection screens 1100 as subscreens.
The next screen number of screen 100 is 100 (statically-defined).
PROCESS BEFORE OUTPUT.
MODULE status_0100.
CALL SUBSCREEN area INCLUDING sy-repid number.
PROCESS AFTER INPUT.
MODULE cancel AT EXIT-COMMAND.
CALL SUBSCREEN area.
MODULE user_command_0100.
look at the below link
http://help.sap.com/saphelp_nw2004s/helpdata/en/e7/deb237b9a9a968e10000009b38f8cf/content.htm
Regards
Sudheer -
Can we add new field to existing Sales Analysis by Item report?
I would like to add sum total weight of all the items sold so far to the above system report?
How could i do that please?
Thanks.You need to have your own report. This system report is hard coded. You do not have option to add fields there.
Thanks,
Gordon -
Need to Add field EKET-EINDT and EKET-SLFDT to ME2M Report output in ALV
Hi All,
I need to add fields EKET-EINDT and EKET-SLFDT to the output of program ME2M Transaction.
I have appended the structure MEREP_OUTTAB_PURCHDOC with these fields. and it is coming in the ALV output field catalog.
I need these fields output only for ALV display only.
Please let me know which enhancement i need to write code to enhance the output with these filed values added to the ALV internal table
Thanks in Advance
ArunHi All,
I am able to get the field EINDT and SLFDT into the structure using Append structure and is also getting displayed in the output in ALV.
But i need to know how to add code for filling these fields and passing into ALV. I need to know the Enhancement spot.
Please let me know how to achieve this scenario
Thanks
Arun -
Impossible to add new contact or edit
l can't add new contact or edit on my phone
Hello !
Try the following:
Simply delete all the Messenger apps (Yahoo, MSN or Live) which you might have upgraded recently / delete apps which were recently installed before the error which actually started occuring .
After that unplug the battery while the phone is still "on" and restart the phone.
In fact I had deleted a whole bunch of apps to facilitate my OS upgrade as I did not have enough memory on my Device.
This not only helped solve my above mentioned problem but also made my phone restart in less than 3 minutes (the earlier reboot was done in not less than 15 minutes !!).
Therefore my conclusion as from the above incidents is to keep your apps in the bare minimum so that your phone performs to the best.
Hope this resolves your Problem!
If your problem has been resolved then would request you to Click on "Like" and accept as "Solution" so that other Advisors doesnt invest their time on this Message anymore.
Thanks.
Maybe you are looking for
-
Error install windows 8.1 on a 2010 macbook pro 13 inc
hi. i am trying to install windows 8.1 on a 2010 macbook pro 13 inc i have now successfully make bootcamp show the option to create a windows 7 install disk how ever it does not show the other part of create windows 7 or "later version" install disk
-
Can the aTV read files from an iTunes library on my nas drive without my computer being on
I have my itunes library on a My Book Live nas drive that contains all of my digital movies and TV shows. I want to be able to watch my movies from the library without a computer running. I understand that Apple has chosen to chain you to the compute
-
I lost all of my ITunes library when my windows laptop had a major glitch. I have all of my music on an IPad and IPhone. Can I pull the music from the IPad or IPhone when I connect them in ITunes? Thanks.
-
O novo Firefox 29.0 estão com as abas e barras superior exageradas e isso toma muito espaço no monitor. Teria como os desenvolvedores compactar mais a parte superior da nova interface do Firefox? Isso ajudaria e muito! A 'estrelinha' deixou de ter su
-
The two computers connect fine over the wifi network, but the mac only shows one user file - the administrator. There are no error messages. It doesn't show mine (even though I am logged on as me on the PC laptop). I don't have a seperate administr