Can we add our own menu in sap easy access screen

can we add our own menu in sap easy access screen
along with the existing menu items...
ex : can i add the new menu item as help1 on that screen
regards
raghu

go to transection se43 ...ther e u can create ur own menu list.. and ur cusomize transection to that perticular menu list.....
You can enter the area menu in the command field like any other transaction code, also in menu exits can be filled with a area menu.
You might play a little with S000 and S001 - when you enter them, the menu tree of easy access changes.
Do you search for the menu exits to append your area menu into the standard menu tree?
Message was edited by: kishan negi

Similar Messages

Activating User Menu option in SAP Easy Access Screen

Hi,
Can anyone tell me to activate User Menu in SAP Easy Access screen.
Menu -> User Menu option is disabled.
Is there any Profile Paramater to Enable or Disable this menu option?
Thanks,
Piyush

Hey,
Juan and Ganesh, you both are right. But the roles are already assigned to the users.
Its not for 1 users, its for all the users.
We can activate the user menu from Easy Access Screen menu option Menu->User Menu. But this is disables in the Menu->User Menu.
Hence any user is not able to the the user menu.
There is a Profile parameter through which we can enable or disable this option. Can you please provide me the name of that parameter.
Thanks.,
Piyush

I want sap easy access screen as an iview in the portal

Hi ,
I want sap easy access screen as a iview in portal ,how can i do it.
I used SESSION_MANAGER tcode and created a transaction iview but it is going to rs00 tcode screen,
PLZ help me

Hi
I have created an iview with tcode Session_Manager and it is working fine.What is this txn rs00? When I check this tcode in our ECC 6.0 system, it says rs00 does not exist.
Check your system setting and iview config again.
Regards
Prabhakar Lal

User name on sap easy access screen

Hi gurus,
i m new to sap basis,
i hav created a user i want to display name of that user on sap easy access screen. pls help
also tell me name of transaction through which we can view the all created user in a client not only log in(al08)
rgds
Awnindra Dutt Tiwary

> i hav created a user i want to display name of that user on sap easy access screen. pls help
See the username? Where?
> also tell me name of transaction through which we can view the all created user in a client not only log
use SUIM.
Markus

Transaction code for user menu, sap easy access

Hi system experts!
Does anybody know which transaction causes the user-specific menu within "SAP easy access" (the welcome screen after login, like /n does) ?
I need it to be called from a portal iView, so that the usual sapgui-like screen with the user's menu appears in a portal screen, both for SAPGUI for windows and http.
Trx. S000 or SESSION_MANAGER does not cause the user-specific menu when called from the portal. These work least of all for call via ITS.
thanks
Andreas

hi ,
The transaction code is SE41.. This is for creating Menus and tool bars.
you can also try SMEN it will call the user menu as you described in your post.
Regards,
Krishna
Message was edited by: Krishnakumar

Send e-mails through broadcaster to SAP Easy access menu inbox

Dear Experts
I have been asked to broadcast a report to few users and itshould become available in their in-box folder ( that accessible from SAP Easy Access screen toolbar)
Can you help me? If you need further information, feel free to ask.
Thanks in advance
M

Mario,
Please check out the official documentation first before asking generic questions. You can start looking at [how to Broadcast by E-Mail|http://help.sap.com/saphelp_nw04s/helpdata/en/a5/359840dfa5a160e10000000a1550b0/frameset.htm].
If the official documentation doesn't answer all your questions, then please come back and ask them here..
Note that it depends on what type of report you want to broadcast. As previously mentioned, workbooks need to have a precalculation server setup, but other kind of reports don't.
Best regards,
Sebastien Francal

Logon screen in SAP Easy Access

Hi,
I want to add up a new logon screen after the user logs in to the system with his sap user id and password.I want this to happend in SAP Easy Access screen.
This should happen when user tries to enter any transaction in the list box or when he tries to double click any transaction from the sap menu treee or user menu tree.
Is this possible???

Hi Martin,
Thanks for the reply......let me tell you my requirement in brief
When user logs in for first time.........in the sap easy access screen Iu2019m starting up a transaction(default transaction, module pool programming with some dialog screen for further login checks which are custom checks).I've achieved it.
Now in our PRD systems the user logs in and we will not be setting up any parameter to him like what we have discussed in transaction RZ11.(to auto log off, if the user is IDEAL for long time).........so there is no question of user sessions getting terminating if he is IDEAL for long time.
My requirement is if THE USER IS IDEAL IN PRD SYSTEM for let say 3 mins or more then my custom screen should pop up again......
Is this possible with the code which you gave me????

Drill down Reports created In SPRO to execute in SAP Easy Access

Hi
In customizing which is transaction spro, at the following location Financial Accounting->General Ledger Accounting->Information System->Drilldown Reports you can create drill down reports.
What I would like to know is where can the user execute them from in SAP Easy Access?? There is transaction FSIB (Background Processing) which allows you to execute it in SAP Easy Acces but it wants to print the report and not display it on the screen. Is there a way to display on the screen in SAP Easy Access??
Thanks in advance

Hi,
To run a report either in foreground or background you need to know the report name. To run the report in foreground goto SE38 and give the report name and execute it. If you see the status message " This report is not a type P" then goto SE93 and findout the transaction with the help of report name description. so you can run the transaction. To add the transaction to your role technical consultant will take care.
Bye,
Jyothi.

Regsrding sap easy acess screen

Hi.
After entering the user name and password in the SAP login screen, it will take us to sap easy access screen..
instead of calling easy access screen, need to call the user defined zee screen. this screen should be called to each and every user who logs in into the sap. were to assign this T code which is to be called..
any user exit is there to control this or its a basis related work. please help me in solving this issue..
regards,
sudha.

Hi!
It's possible to set yourself a starting transaction, using the following menu on the SAP Easy Access transaction: Extras -> Set start transaction
I don't know, how can you set it globally for each user, as you said, it is a basis relevant thing (you might check out the administration SAP menu.
Regards
Tamá

With Adobe Premier Elements 13 can I add my own audio tracks by pulling music from my files and by using my UBS microphone?

With Adobe Premier Elements 13 can I add my own audio tracks by pulling music from my files and by using my USB microphone?

larryh
Please remind us on what computer operating system your Premiere Elements 13 is running
Using your own music.....
Yes, with important but.....
Details
If your music is from iTunes, more than likely you will get some sort of error message from the program when you try to import the iTunes music into Premiere Elements (most versions including 13). In that case, please convert the iTunes music to the wav version in iTunes using the following iTunes instructions.
iTunes: How to convert a song to a different file format - Apple Support
If you are getting program error message using Premiere Elements 13 Add Media/Files and Folder with other than iTunes music, please give the source and properties of that music.
Using USB Microphone....Not recommended by Adobe....See Adobe ReMe
Details
As for Premiere Elements narration clips using the its Narration Tool
1. Adobe documentation indicates the USB microphone do not work in Premiere Elements and suggest the use of microphones that connect to the computer via computer jack.
But, there are some scattered cases where the user has found a USB microphone that has worked for him or her.
2. Be sure to check Edit Menu/Preferences/Audio Hardware ASIO settings to assure that Input and Output are enabled.
3. There have been reports (Premiere Elements several versions) where addition of narration using the Narration Tool results in loss of pre-existing
sound on numbered audio track clips and soundtrack.
ATR Premiere Elements Troubleshooting: PE12: Audio Losses After Narration Addition
4. In my particular Premiere Elements 13 on Windows 8.1 64 bit, I have found that I need to set the Mic Sensitivity all the way to the left to avoid
serious audio distortion.
I have tried to give you an overview to avoid surprises if you have not used the features that you pointed to in your thread question. Please let me know if you need further information.
Thank you.
ATR

Can we create our own loops? Basic question.

Hi,
Can we create our own loops in Logic Pro. I see in all the tutorials. They are either taking input from external instruments OR use existing apple loops.
I have tried FL studio demo to create our own loops. But there is no trial version for Logic Pro. Need your inputs before I purchase it.
Thank you.
Anji

Yes you can!
It is as simple as selecting a Region (optional trimming recommended) and choose the Export command.
A Dialog window opens up that lets you enter the metadata
Apple had its separate "Apple Loop Utility" app (now only available in the developer package) that allowed you to create loops in a standalone app. The built-in loop capability in Logic uses part of that engine.
Hope that helps
Edgar Rothermich
http://DingDingMusic.com/Manuals/
'I may receive some form of compensation, financial or otherwise, from my recommendation or link.'

How can I add my own dynamic flash to Apex Applcation?

Hi all,
Can I add my own flash to Apex applcation and enable the flash to communicate with my applcation using XML?
I want to customise the action of my flash. The flash will get a xml from a PL/SQL procedure just as flash charts get xml from apex_util_flash.
Is it possible to call a PL/SQL procedure or an apex application process from a flash?
Is there another way of doing this?
thanks

I haven't tried any coding experience in flash , so my answer would be a bit vague.
But I am basing my logic on this thread Calling PHP function from Flash (it says PHP but the code example involves a server request from flash)
Set up an Application process that returns your XML (as the server response using ht.p)
// object which sends to php
var send_lv:LoadVars = new LoadVars();
// object that receives
var load_lv:LoadVars = new LoadVars();
// the load_lv accepting variables
load_lv.onLoad = function(success:Boolean)
    if(success)
             //Do your thing here
             //Parse the XML in flash using this valiable as the source
        else
            trace("load error goes here")
$.ajax({
type: "POST",
url: "wwv_flow.show",
data: {
p_flow_id : $v('pFlowId'),
p_instance : $v('pInstance'),
p_flow_step_id : 1,
p_request : ""
//This section is based on the documented server request format using jQuery (given in comments above)
// send_lv sending out variables and instructing the returned variables to go to load_lv
send_lv.p_flow_id = <fetch page element value of pFlowId> //corresponding to $v('pFlowId')
send_lv.p_instance = <fetch page element value of pInstance> //corresponding to $v('pInstance')
send_lv.p_flow_step_id = <page number>
send_lv.p_request = 'ON Demand Application Process Name'
send_lv.sendAndLoad("wwv_flow.show",load_lv,"POST");-------------------------------------------
You might also be interested in this flash library named SWFHttpRequest Flash/Ajax Utility
Apparently, it adds a JavaScript object for performing XMLHttpRequest-like requests fro flash.
Hence you should be able to use you standard javascript like Ajax request using that.
Else check for similar libraries for flash/give the server request section of your flash documentation a good read.
You might have to play around a bit with the code and your flash documentation to get it working , but I hope this would have given you some pointers.

Can I add a sub menu to Preferences menu?

My plugin requires some settings to be done before using that. Can I add a sub menu to a Edit->preferences menu?

No.

How can i add my own number in imesseges

Hi my name is kawaljit kaur.suddenly my phm's imesseges stop working...its just using my apple id which i dnt want...plz tell me how can i add my own cell number in imesseges.thnx

Hi, Kawaljit kaur.
Thank you for visiting Apple Support Communities.
Here are a couple troubleshooting resources I would recommend when experiencing this issue.
Phone number missing on iPad or iPod touch
If your phone number is not listed on an iPod touch or iPad, follow these steps:
Update to the latest version of iOS.
Verify that you're using the same Apple ID that you are using on your iPhone.
On your iPad or iPod touch, sign out of your Apple ID in the following locations:
Settings > Messages > Send & Receive. Tap your Apple ID, then tap Sign Out.
Settings > FaceTime. Tap your Apple ID, then tap Sign Out.
Sign in to your Apple ID with FaceTime and iMessage.
If your phone number is still not listed, follow these steps:
Sign out of your Apple ID on all iOS devices, including your iPhone, in the following locations:
Settings > Messages > Send & Receive. Tap your Apple ID, then tap Sign Out.
Settings > FaceTime. Tap your Apple ID, then tap Sign Out.
Sign in to your Apple ID on your iPhone.
When activation is complete, your Apple ID and all verified email addresses should be visible in Settings > Messages > Receive At and also in Settings > FaceTime.
Now sign in to your Apple ID on your other iOS devices.
iOS 6 and OS X Mountain Lion: Link your phone number and Apple ID for use with FaceTime and iMessage
http://support.apple.com/kb/HT5538
If you experience any issues with activation, see the article below.
iOS: Troubleshooting FaceTime and iMessage activation
http://support.apple.com/kb/ts4268
Cheers,
Jason H.

How to add our own applications to Cisco Connect Cloud?

How to add our own applications to Cisco Connect Cloud?

You might find this interesting.
http://newsroom.cisco.com/press-release-content?type=webcontent&articleId=926074
Interested developers are invited to visit the Linksys Developer Community at http://developer.cisco.com/web/ldc to register and develop apps for Linksys Smart Wi-Fi Routers. Cisco empowers developers with technical, marketing, and sales resources to help support every phase of their developmental and business cycles.

Can we add our own menu in sap easy access screen

Similar Messages

Maybe you are looking for