Can we add the info objects in transfer structure

you can add infoobjects in the communication structure and they will be available in the transfer rules.
the transfer structure is a copy of the fields available in your extractor, so to add fields here you have to append them to the extract structure in your source system

Similar Messages

Can we add an info object and its nav. attr in an aggregate together?

Hello
I am getting an error when I try to add 0MATERIAL and 0MATERIAL_OPROD_HIER in an aggregate at the same time. In the cube, both 0MATERIAL and its attr 0MATERIAL_0PROD_HIER sit in the same dimension. Therefore, when I try to create an aggregate and drag these chars in, they try to come into the same dimension here also.
1st scenario:
1. I add 0MATERIAL in the aggregate.
2. I try to add 0MATERIAL_0PROD_HIER in the aggreate, I get an error message ' Aggregation levels cannot be defined for 0MATERIAL_0PROD_HIER.
3. And it does not let me add this nav attr at all.
2nd scenario:
1. I first add 0MATERIAL_0PROD_HIER in the aggregate.
2. I try to add 0MATERIAL now.. I get the same error as above for 0MATERIAL this time.
3. But it lets me add 0MATERIAL inside.
4. Now, when I go its context menu (right click) and select aggregation as 'All Char Values' for 0MATERIAL, then the error goes away.
5. But after I activate and fill the aggregate, I have a look it again.. and now I only see 0MATERIAL and its nav attr which I added first has disappeared.
Why do the above 2 happen? And if I have an info object and its nav attr in ROWS in a query, and if I am not able to add both of them to the aggregate.. how can I improve the performance of the query?
Please advise.

Hi Srinivas
In your scenario, it is sufficient if you just add 0Material when you are creating the aggregate. Need not add the nvaigational attribute in the aggregate definition. The procedure you followed the first time is right i.e. Drag and drop 0material first.
The system does not allow you to add the nav attribute because it is not required. I say this because a navigational attribute added to your infoprovider is like (in terms of SQL) joining your infoprovider with your material master table. Navigational attribute's value is not physically stored in your cube. It is brought in during execution time in both list cube as well as in your query output.
Similarly when you execute your query with 0material as your aggregate, even if you add a filter or variable restriction on 0Material_prodHier your query WILL use the aggregate since 0material is referenced.
You can even check this in RSRT. Give your query name, and generate report first. Then click on Execute + Debug, Choose Display SQL/BIA Query and enter your selection and choose enter. You will see the SQL of your query and in the SQL select statement you will see that your aggregate table is chosen instead of your infocube. This aggregate table only will be read during your query execution in Bex as well.
I hope this helps.
Thanks.

How can I add the lyrics for songs in MP3 format in iTunes for Windows? There is even no the 'Lyrics' tab in the 'Get Info'.

This topic may be old for you, but I searched everywhere on internet and there's still no solution. I even called the Apple Support and the contact support is taking so long to answer... I can't add the lyrics for songs in MP3 format in my iTunes 11.1.3 for my Windows 8.1, I clicked right at the song in my iTunes library, clicked 'Get Info', and there's no 'Lyrics' tab there. I tried several lyrics-adder programs but they just won't work. How can I add lyrics for my MP3 songs then?

You may find that the file is Read-only, which means that it cannot be altered.
However, you can change the Read-only in "Properties" using your file manager.
1. The location (for the next step) of a song is found by looking n the Get Info/Summary>Where: of each song. Make a note of the location.
2. Go to the location (on your computer) of the song, right-click it and the last item on the pop-up menu is Properties. Go into Properties/General>Atributes and turn off the tick in the box named Read-only. Now go back to your iTunes Library and try that song again. The Lyrics tab should now be there.

How can we find out the info object in a query ....?

How can we find out the info object in a query is belongs to that particular info cube? If the query is built on a Multiprovider having 4 different info cubes.

Hi,
If you have restrictions at the infoprovider level in the RKF then it is coming from that particular infocube.
Or go to the selection option in the multiprovider...her you can get the mappings of which key figure is populted from which infocube.
For characteristics you will have to look for identification tab in the characteristics option.
Thanks

How can I add the presets to new catalog or sync info to both catalogs?

I have lightroom on my main laptop was advised to create a new catalog on my external (my laptop is almost out of space). I just upload some presets to lightroom,--when I use my Lightroom catalog on my external the presets are not loaded at all. How can I add the presets or sync both catalogs. Thank you

Listener can be added to a cell editor, not cell renderer.
Set relevent cess(s) to setEditable == true when you use your custom cell editor.

How to remove the space in the info object level?

Hi,
I created a Master Data info Object and gave the data type as <b>Char</b> and length as <b>30</b>.
From the source system I am getting the data of length 9. But at PSA level I am getting some erroneous records.
Example: Data from the source system 'a12345678'
Data in PSA 'a12345678b' -
*** where b - Blank
With out changing the length how can I remove the spaces (Blank)?
Can any one suggest me how to remove, where and what to apply ?
I need to do any settings at the info object level or at the Transfer Rule?
Please provide the each and every step to resolve my problem.
Thank you

Hey you can allow space in RSKC tcode and execute it... .that's it .
and below is the routine for invalid chars and you can have this in update rules ..
data: w_fielda(x) type c.
data: w_result(x) type c.
data: w_temp_field(1) type c.
data: w_count type i.
w_fielda = COMM_STRUCTURE-/BIC/Zxxxxxx.
w_count = 0.
do x times.
clear w_temp_field.
w_temp_field = w_fielda+w_count(1).
if w_temp_field CA
'!"%&''()*+,-./:;<=>? _0123456789ABCDEFGHIJKLMNOPQRSTUVWXYZ'.
w_result+w_count(1) = w_temp_field.
endif.
w_count = w_count + 1.
enddo.

How to activate the Info object catalog in Business content

Hi,
While trying to activate the Info object catalog, I found that some of the info objects under this catalog was earlier activated by some other developer. I brought this catalog (0SALES_CHA01) over to the Business content activation panel ( with only 'necessary object settings ) and all the info objects that also came along were de-selected since I didn't want to install those again). When I tried to install these I get an error indicating that some of the info object in question are not already active.. and ultimately the catalog doesnt get activated , although more than half of its infoobjects are already active under the '0CHANOTASSIGNED' node.
Please let me know whether I can get only the Catalog activated without getting any existing activated info object merged or installing those which are not already activated.
Thanks
Arunava

Hello Arunava,
Just drag the infoobject catalog as u did earlier to the left in the bus cont installation screen with "only necessary object" option.
Dont try to deselect any object. Go ahead with the default options and install in background.
Now you can check for the available objects in the catalog. if you have some objects missing, and available in unassigned node,double click on the newly installed infoobject catalog, select the required objects (which are not yet assigned to this) from the left side and bring them to the right side.
this will make the unassigned objects assigned to the required catalog.
Hope it helps..
(please dont forget to reward points to helpful answers)

Error when assigning SID while uploading text in the info-object of the DSO

Hi
I have a scenario where I need to extract a char 60 field from R/3 in the DSO.
I have created the info-object which is char 60 which has the master data text activated.
In the DSO transformation I have mapped it to the R/3 field.
While activating the data in DSO its giving the error message
'Value '20 per action plan' (hex. '32302070657220616374696F6E20706C616E') of characteristic'
'Error when assigning SID: Action VAL_SID_CONVERT InfoObject ZRMSD '
How to overcome this issue.
Please advise.
Thanks in advance.

Change the InfoObject for this text so that it will allow lowercase letters. To do this, go into Change mode on the InfoObject, go to the General tab, check the Lowercase letters checkbox and activate the InfoObject. After this has been activated, you can then restart your process and this SID violation error should no longer be thrown for this.
If you don't want to do this, then you can use the TOUPPER formula in the Characteristic Routine, in the Transformation, to change the value of this field contents to uppercase. This can also be done by using an ABAP routine like this:
TRANSLATE column TO UPPER CASE.
Edited by: Dennis Scoville on Nov 3, 2009 9:55 AM

My computer crashed and I no longer have the itunes library. i get an error msg that my iphone is synced to another library - how can I get the info from the phone to the itunes library?

my computer crashed and I no longer have the itunes library. i get an error msg that my iphone 3g is synced to another library - how can I get the info from the phone to the itunes library without losing everything? How do I delete old audiobooks from my iphone?

You can transfer itunes purchases: File>Devices>Transfer Purchases
The iphone is not a storage/backup device. The sync is one way - computer to iphone. The exception is itunes purchases.
It has always been very basic to always maintain a backup copy of your computer. Use your backup copy to put everything back.

How to track the user who deleted the info object.

Dear Gurus,
In our BI system one info object has got deleted. If I need to track the user who has deleted that how can I track it(in which DBtable). And the complication is one user ID is being used by many people, in this case how can I track that from which machine the Info Object has been deleted(if there is any possibility to track the machines by IP address).
Kindly let me know if there is any procedure to find it out. Your help will be rewarded with a great honour.
Regards
Mohan Kumar

Hi dear,
you have to go in SLG1 transaction, and then select
Object: RSD
Subobject: IOBJ_DEL
External ID: (put here the name of your deleted IO)
Then choose a time range...and voilà, you can find the user who deleted the IO...
Hope it helps!
Bye,
Roberto
About the IP...look at USR41 table, but I think it's a bit difficult fo find data referred to the past...
If you haven't activated logon auditing in SM19...

How to dispay the text values of the info objects in my transformations

Hi
Can any one say how to do a lookup for a text table. For example for a particular customer number i need to get the customer name from the text table.In the same way i need to display the text values of the info objects in my transformations. It would be great if any one could send me the code.
Thanks
R

Thanks for the immediate reply Anshul, Actually i am having the fields of short description and long description in my text table, my requirement is to display only the long description data in the text table. So it would be great if you could get me the solution.
Thanks
R

How can I add the attachment list pdf file context to purchase order ?

Dear all,
I have use services for object in ME22N to attach PDF file to purchase order,I want to know how can I add the pdf file context to purchase order when I send the purchase order to vendor.
Thanks in advance
Best regards,
Merry

hi,
attach document through Service for Object button. Service for Object button available down side of Command screen ( in your PO screen ME22N ) .
Click your Service Object button -> Create -> Create attachment
then select your window directory ( which file you need to attach) select your file Now your system shows message Service "Create attachment" is started.
Save again your PO. You can see (open) your attachment in same field ( Service for Object ) select and Create and check attachment list. You can attach as many document in your PO.

How can i add the songs in ringtone

How can i add the my fav songs in rintone gallery top play a custom wise songs on contact numbers

Follow this DIY using iTunes:
1. Select a title (.mp3 or .m4a) in your iTunes Music Library
2. Do File > Get Info on selected title (Windows do Edit > Get Info)
3. In the dialog choose Options tab
4. Set Start Time and End Time (no more than 35 secs otherwise won't work)
5. Close dialog.
6. Now control click the title (right click) and choose Create AAC Version
Note: If you don't have Create AAC version, switch in menu File > Preferences...(Windows do Edit > Preferences...) > General > Import Settings... > Import Using: AAC Encoder.
7. When it is done, drag the newly create title to the desktop.
8. Delete the newly create title in iTunes. <-- This step is important
9. Rename the title on your desktop from ringtone.m4a to ringtone.m4r
10. Drag and drop it into iTunes
Now you have a ringtone.
Make sure it is selected in iTunes > Tones for syncing with your new iPhone.

How to increase the length of the Info object

Hi All
Any one have idea about how to increse the length of the Info object Char(beyond 60). Can you please explain me in detail we are using BI7.0.
Thanks
Vani

Hello Vani,
You cannot increase the length of an info-object beyond 60 chars.However if you want to store a characteristics data with more than length 60, then you may create separate info-objects
for example: if you need to store 'notes' which might have length more than 60,
then you may create info-objects like notes 1/3 ---store first 60 chars.
notes 2/3 --- store next 60 characters and so on.
Thanx
Priyanka

How to reduce the length of the info object that's being used?

Hi All,
I have created info objects and used them in a DSO. Now I want to reduce the length of the info objects but i'm unable to do it. When I reduced the length and tried activating the Info object, it's giving me error and the info object is not getting activated. Please guide me how I can reduce the length and activate the Info Object.
Thanks
Hima Bindu

Reducing the length of an infoobject is not that easy
Cleanest way -
Drop all transaction data for that infoobject
Drop all data in the DSO and cubes.
Reduce the length and then activate and transport all the infoobject and there dependence objects.

Can we add the info objects in transfer structure

Similar Messages

Maybe you are looking for