Can we apply attribute change run for datatarget (Master data )

hi,
can we apply attribute change run for datatarget like masterdata where for example i am loading 0pm_order_attr to 0pm_order data target (master data). after successful loading of data, do i have to apply attribute change run for <i>info object</i> 0pm_order or apply attribute change run for 0pm_order in <i>info providers</i> because after successful loading of pm order data, i am trying to load transactional data and it is showing error "No SID value found for xxx record"
pls advice how not to make the error repeat even after successful loading of master data.
Thanks in advance, quick responce is greatly appreciated.

Hi all,
i am in production server and cannot activate the master data 0pm_order which is in info providers directly, is there any chance of activating it with any other option.
coming to attribute change run, i understand that we can apply for master data objects which are there in info providers, am i correct?
i ran attribute change run yesterday for the info object 0pm_order but even after doing that i tried to load transactional data but it was failure with the same error "No SID value found", why i am getting when i found master data loading successful and ran attribute change run for infoobject.

Similar Messages

Change pointers for HR master data

Hi I am trying to setup change pointers for HR Master data , in relation to HRMD_A06 idoc , I did all the steps for setting up change pointers.
Transaction bd52 for my reduced IDOC shows 0 entries, When i did the same for customer master data , BD52 had some entries by itself .
I can't produce any HRMD_A06 Idocs , What am i doing wrong? Should the entries in BD52 be added manually for all the fields i need?
Any help is much appriciated.
Sudheer

Hi,
guess it's not necessary to see some entries in bd52 (it's enough to activate in bd53).
Do you have configured RBDMIDOC (otherwise no IDocs will get generated).
Or you run t-code bd21 for testing. Standard way is to run the report RBDMIDOC in a periodic background job.
A good description could be found here (p. 12):
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/30139fb0-360c-2a10-1e9f-9d5417754983
Regards
Patrick
Edited by: Patrick Koehnen on Aug 12, 2008 3:40 PM

Export and import change document for user master data

Dear Gurus,
I have two queries on change document for user master data:
1. Are there any approaches to export and import change document for user master data?
We often do system copy from PRD to QAS for UAT and troubleshooting. Before system copy we export the user master data from QAS and then import after the copy process. We would like to keep the change document for user master data on QAS from being refreshed from PRD for security reason.
2. Change document for Role change in QAS
When the role is created or modified in DEV and then transported to QAS, the role change document doen't include this change log. The role change document in QAS only records those role changes directly made in QAS.
Could you advise this is by SAP design or are there any approaches to record this transported role change in the role change document in QAS?
Thanks
YBY

1. Perhaps you want to consider a system copy to a "virtual system" for UAT?
2. Changes in QAS (as with PROD as well) will give you the delta. They should ideally be clean... You need to check the source system.
Another option is to generate the profiles in the target system. But for that your config has to be sqeaky clean and in sync, including very well maintained and sync'ed Su24 data.
Cheers,
Julius

Attribute Change Run for Hierarchy

Dear experts:
we are trying to create a process chain for a hierarchy. When we included "Execute InfoPackage" into process chain, it automatically dragged other 2 steps into process chain as well, which are "Save Hierarchy" and "Attribute Change Run".
My Question is when we looked into "Attribute Change Run", the obj type is "Execute InfoPackage" instead of "Hierarchy". Shouldn't we choose hierarchy as object type when operating Attr change run??
Besides, I checked SAP document. It is said the "Attr Change Run" is only necessary when the hierarchy occurs in aggregates. Can anyone please explain to me what that means.
Thank you very much
Regards
SzuFen

Haven't really looked at the object types in the process chain (we're still using event chains here for the most part), but I would be inclined to leave it as, and only change it if you have a problem.
The process chain tool drags steps into the chain by default, e.g drop and build index, attr change run. That doesn't mean you have to keep them in the chain. If you do not have hierarchies in your aggregates, you could remove the step. Now of course, the burden falls on you to remember to add it if you ever create an aggregate with a hierarchy in it.
Of course the next would be, if most of your queries use a hierarchy, you would probably want the hierarchy in the aggregate, otherwise the aggregate isn't going to be used.

Attribute Change Run- For Custom InfoObject

We have custom IO ZGN_PROD. For past few days attribute change run is not happening to this IO even though there are thousands of M version entries in P table. We have tried to use Report RSDDS_AGGREGATES_MAINTAIN for attribute change run but then also it is not going through. When we debug this report we found out that there is SQL statement in Report RSDDS_AGGREGATES_MAINTAIN which is not getting executed successfully.
SQL Statement is
UPDATE (<l_sx_itab>-name)
    SET objvers = rs_c_ojbvers-active
         changed = rs_c_changed-nothing
    where objvers = rs_c_objvers-modified
      AND changed = rs_c_changed-insert.
After execution of this SQL Sy-subrc is 4 instead of 0.
What could be the reason.
Can you please help me resolve this issue?
Thanks and Regards,
Samir

Haven't really looked at the object types in the process chain (we're still using event chains here for the most part), but I would be inclined to leave it as, and only change it if you have a problem.
The process chain tool drags steps into the chain by default, e.g drop and build index, attr change run. That doesn't mean you have to keep them in the chain. If you do not have hierarchies in your aggregates, you could remove the step. Now of course, the burden falls on you to remember to add it if you ever create an aggregate with a hierarchy in it.
Of course the next would be, if most of your queries use a hierarchy, you would probably want the hierarchy in the aggregate, otherwise the aggregate isn't going to be used.

Attribute change run for Customer

Hi All,
I did a delta load of the customer data and got some new and changed records. I remember that we need to do an attribute change run after loading any master data. To do that, I went through the menu path Tools Apply hierarchy/Attribute change run...but couldn't find anything there. Do I need to do anything to get the "Customer" here to do the attribute change run.
Thanks,
RPK.

Hi
Go to
Tools-->Apply hierarchy/Attribute change run
Oncle ur there click execute to start change run,It will staart and finishes the Attribute change run.
If u want to see the list of objects click on the 'InfoObjectlist' on the Tools-->Apply hierarchy/Attribute change run screen
Assig point if it is helpful

Attribute Change Run and Editing BI data

Hello Experts,
I have two questions.(They are not related to each other).
Can BI data(Infocube data) be edited?
For eg GL account in R/3 is changed from 100 to 2100. I want to know how can this be handled in BI.
Attribute Change Run in the process chain ends with error.
"Master data characteristic ZACCTNUM activated in 6 seconds. Error while activating characteristic   ZACCTNUM ". There are no more information.
   The BWREMOTE user has the authorisation to Execute Change Run.
   What could be the possible reasons for this failure.
Thanks in advance.
Regards
Meenakshi

Hi Meenakshi,
Regarding your questons:
1. You can't edit the data directly in the cube. If you have incorrect data in the cube and the data is still in the PSA you can edit the incorrect data in the PSA and you can then delete the incorrect requests from the cube. You can then reload the correct data from the PSA. If its not an option to delete individual requests you could delete the incorrect data using the selective deletion option (if you can select on the incorrect data in the cube). You could then reload the correct data from PSA or source system.
2. Please check the infoobject ZACCTNUM is active in RSD1. If it is there may be an inconsistency with the data in the infoobject ZACCTNUM, please check if the solution part of the SAP note 1033721 can help you in this case.
Best Regards,
Des.

Difference between a Change-run and Activate master data

Hi experts,
Could you tell me what is the difference between making a change-run on a masterdata (rsa1 --> Tools --> Apply Hierarchy/Attribute Change...), and making a right-click on this masterdata and click on "Activate master data" ?
The result seems to be the same, all rows in version M (Revised) are changed in version A (Active)...
Thanks for your help.
Tempka.

Hi
Change run will update the master data changes in Aggregates and update the object master data as well.
Activate master data will only activate the new records and it will not update the aggregates.
check out the below thread
Attribute Change Run VS Master data activation
Regards,
Vekatesh

Change pointer for HR master data is not getting generated in table BDCP

Hi,
I have done all the required configuration for change pointer for HR master Distribution and it was working fine few days back. Now suddnly it has stopped working.
Can anyone assist me on how should i debug it.
Thanks
Sunil Singh

Hi Shital,
Thanks for your Reply.
I am not able to find that path in SPRO
Basic Functions-> application Area
And Also My change pointer configuration was working properly and it suddenly stopped working.
I mean to say all the required settings was done previously.
Anyways kindly let me know how should i proceed.
Thanks
Sunil Singh

How are attributes and texts for a master data linked and targeted to ...?

Our previous consultants used to load data to master data 0MATL_GROUP.
1. RSA1 -> InfoProvider -> Select 0MATL_GROUP or 0MATL_GROUP___T
Check these above two and find the records loaded are both 1,216 for Language EN.
We check the data flow of this master data (0MATL_GROUP or 0MATL_GROUP___T) and find there are four branches which target 0MATL_GROUP:
branch 1: 0MATL_GROUP is itself an InfoSource and the datasource is 0PROD_CATEG_R3_MAP_ATTR. However under this datasource, there is no any InfoPackage, i.e., the system doesn't load data to 0MATL_GROUP through this branch.
branch 2: Through InfoSource 0MATERIAL_ATTR. However the InfoPackage under this InfoSource target data load to 0MATERIAL but not 0MATL_GROUP, i.e., the system doesn't load data to 0MATL_GROUP through this branch.
branch 3: Through InfoSource ZMATL_GROUP_ATTR and it's corresponding datasource Z_MAT_GROUP_ATTR. InfoPackage monitor shows the data load record for this datasource is 490 (Run RSA3 on R3 for this datasource also gives the same record count).
branch 4: Through InfoSource 0MATL_GROUP_TEXT and it's corresponding datasource has the same name. InfoPackage monitor shows the data load record for this datasource is 1190 for Language EN (RSA3 on R3 for this datasource gives the same count for language EN).
2. InfoObj. 0MATL_GROUP
1). Master data tab (/BI0/PMATL_GROUP): 526
2). Text table (/BI0/TMATL_GROUP):
1657 (includes both EN and other lan-guages), for EN: 1190.
3. Check R3 Table T023T (Material Group Descrip-tions) for EN: 1190.
Our questions are:
1. The InfoProvider 0MATL_GROUP and 0MATL_GROUP___T
both have counts of 1,216 for Language EN. And for the four branches in the data flow, only 3rd and 4th branches feed data to it. 3rd branch (datasource Z_MAT_GROUP_ATTR) feed count is 490 and 4th branch (datasource 0MATL_GROUP_TEXT) feed count is 1190 for Language EN. We wonder how attribute and text data are corelated to each other and with it's master data. Obviously 1,216 is not equal to the sum of 1190 and 490, the how 1190 (text) and 490 (attribute) constitute the master data count 1,216?
2. Do we have to use 1st and 2nd branches to feed data to 0MATL_GROUP?
3. How InfoObj. 0MATL_GROUP Master data tab (/BI0/PMATL_GROUP) shows the count is 526? it should be 490 from the custom datasource Z_MAT_GROUP_ATTR, right? But why the count is different?
We would be appreciated any expert input!

Kevin,
can you check the data in Material Group charecterstic againest R/3. One moe thing check how these 4 branches Mapped to material Group?
Take the for Attributes it should be 490. it is 525. try to analyse what are the extra records comparing with Source. take the you found so and so meterial group extra then analyze from where is it getting extracted to BW i mean which DS.. (either branch 1 or brach 2 or branch 3 or 4). then check in R/3 side DS for the 4 branches. then you will know what exactly happening.
Analyze the data from step by step from r/3 to BW for each level. You will get clue.
Nagesh.
Message was edited by: Nagesh Ganisetti

Change Logs for customer master data in 3.1 H version

Hello All
Are they any existing reports or change logs for viewing changes to customer master data in 3.1h version. I want to be able to report based on changes made to customer master.
I know there is a good report in 6.0 version for this- S_ALR_87012182.
If I have to develop a custom program for this in 3.1h. Which table I should use? KNA1 or CDPOS.
Any ideas will be appreciated.
Hema.

Hi,
Please check the filter settings maintained for the adapter object CUSTOMER in R3AC1. The same filter settings can be referred in tables Table: CRMFILTAB (R/3) and SMOFFILTAB(CRM) as per srinivas's reply.
Check the sales area of the customer maintained (Sales Area, Division, Distribution Channel etc.) and see if the current filter settings are restricting the customer from getting replicated in CRM. If everything is maintained fine then check for any failure Bdocs in SMW01 or SMW02.
Regards,
K

Attribute Change Run- Serial or Parallel

If we are building a chain for Attribute Change Run for all Master data objects, should we:
1. load Masterdata A, followed by attribute change run, load masterdata B followed by attribute change run, load masterdata C followed by attribute change run....
2. Load Masterdata in Parallel followed by AND with ONE attribute change run.
The first one seems grossly redundant but then if we have only ONE attribute change run, wouldnt that lock up all the objects for a LONG time?
Also, does an attribute change run by default include ALL objects which have been loaded anew and for which the change run has not run???

Thanks!
So, having just one attribute change run for all these objects is a better option?
Wouldn't it lock up the objects for a long time?
Also, say I have loaded object A , B and C. And in my process chain I have Attribute change run only for Object C.
Will the Attribute Change Run include newly loaded A and B by default?
I ask this because we saw something like this happening
Edited by: CC on Apr 9, 2010 8:33 PM

Aggregates with Attribute Change Run and Master data

Hi !
I created Aggregate which includes Master Data such as Customer , Customer Number , Material , Material Number.....
It also contains navigational attribute and hierarchy...
Now we all know that if Master data and Hierarchy changes frequently(or some new values are added or new attributes are added etc.) we want to see the respective change in Aggregates too
So just Rolling up aggregate will not help.
We need to apply Attribute Change run for this purpose, to aggregates..
Now the question is HOW TO APPLY ATTRIBUTE CHANGE RUN to aggregates?
How to automate this process with Process chains..?
If i create Aggregate on Master Data CUSTOMER NO., DOES IT AUTOMATICALLY INCLUDE THAT AGGREGATE IN ATTRIBUTE CHANGE RUN FOR THAT CUSTOMER NO. PROCESS CHAINS ? Yes or No..........
(What i mean to say is if there is Attribute Change Run for Customer No. and if this is in Process chains specially created for Customer Number , than as aggregates are created on Customer No., does i t automatically applies and make changes to Aggregate too, or do we hvae to create special process chian for it ?)
Please reply asap ? its urgent

hi,
check these links for attribute change run
What's the attribute change run? and the common sequence of a process chain
http://help.sap.com/saphelp_bw30b/helpdata/en/80/1a67ece07211d2acb80000e829fbfe/content.htm
regards
harikrishna N

Attribute change Run Failed/Scheduled

Hello All,
For a process Chain Attribute Change Run has failed in BW 3.5,and I Repeated the Change Run in Chain only
where Repeat option is ,now the problem is in RSA1 it is now that change run is scheduled
and sm37 it is showing that Canceled.
Now there is Other Process Chain in BI7.0 which picks data from 3.5
Should I repeat the Master data Chain in BW 3.5 followed by in BI 7.0
Or any other way is possible as in BI7 the chain has run successfully..
Thanks,
Kiran

Hi Kiran.......
BI 7.0 and BW 3.5............totally two seperate systems..............here BW 3.5 is just act as a source system of BI 7.0.............if change run fails in BW3.5...............it is not going to effect BI 7.0.............
As ajeet already said............it will effect the SID s in 3.5.............because attribute change run activates the master data...........and SID get generated during the activation of master data.......
Also it will effect the aggregates............because aggregates also get adjusted during change run.......if any of the aggregates contains the master data.........which are getting activated in the change run....
Now u r saying........that in SM37 it is showing that the job got cancelled............So it will not locked the master data..............terminated change runs generally lock the master data............then we hav to repeat the chain run to release the lock.........and u hav already repeated the change run............so no issue........
Hope this helps..........
Regards,
Debjani........

How to trigger attribute change run manaully

Hi all,
i need to update a master data object with new data. i have the flat file. i scheduled info package and exected DTP (datasource -
>Master data object). now I need to trigger attibute change run manually. How would i do that?
Pls help
Please search the forum before posting a thread
Edited by: Pravender on Feb 4, 2012 11:16 AM

HI Ramya,
Activation master data is different than running Attribute change run.
Activate master data will only activate the master data in info object(Change the records in M version to A version.
Attribute Change Run will activate the master data in info object and updates the aggregates with new data if you have any aggregates built on this info object.
Be specific while asking the question.
Regards,
Venkatesh

Can we apply attribute change run for datatarget (Master data )

Similar Messages

Maybe you are looking for