Can we apply conditions,xception,etc.. on ods while doing reporting.

can we apply conditions,xception,etc.. on ods while doing reporting.

Hi,
Yes, you should be able to place an exception or condition on your query while reporting directly of an ODS Object.
Hope this helps.
Regards,
Andrew

Similar Messages

Can't apply bold, italic, etc. in Mail after 10.4.7

After going through some new font follies, running through a MS Office update I'd been putting off, and then running the Tiger 10.4.7 Combo update (PPC), my Mail headers were all funky with a lot of extra spacing. Thanks to a thread here from last year, I figured out that Helvetica was the culprit. My headers are okay now. But I cannot apply boldface or italic to words in my Mail messages--no matter which font I set in Prefs or try to select from the font palette (which doesn't seem to be working at all, if I recall its former behavior correctly).
Does this sound like something that could have been caused by the 10.4.7 update? Anyone know a fix?
I should perhaps mention that this problem is not with my PM G5--it's my Mini at work.

A little more info in case this will help someone help me. What preceded the loss of formatting capability in Mail was that we got some new fonts on our network at the office and I wanted to put them on my Mini. I had never added new fonts under OS X before and I probably went about it the wrong way. I opened Font Book and used the "Add Fonts" command to try to grab the fonts from the network server (without first copying them over in Finder). This seemed to work, except for one font that Font Book warned was corrupted. It didn't add the corrupted font.
But subsequently Microsoft Word went nuts and started throwing "font is corrupted and should be removed" at me for every font I had. Some of my Stickies notes also turned into nonsense characters. I ended up trashing everything in the user/library/fonts folder. I also took everything out of the System fonts folder and put it in a separate folder, except the fonts that are identified as essential in this posting: http://discussions.apple.com/thread.jspa?messageID=607630
I decided this would be a good time to do software updates I had been putting off, so I first updated Microsoft Office and then updated my system from 10.4.6 to 10.4.7.
The MS Office update fixed the problem with Stickies, for some reason. Maybe it restored a font. After the OS update, everything seemed fine until I noticed the goofy headers in my Mail messages. I fiddled with Helvetica and got that fixed. But I then discovered that I couldn't make anything bold or italic when composing a Mail message (yes, rich text is selected) and couldn't change the font via the font palette, either (although I can still change the base font in Preferences).
FYI, everything else is working fine--Web pages are displaying correctly and all the formatting commands in Word are behaving as they should.
I didn't post this in the Mail forum because I feel this may be only secondarily a Mail problem--that it's primarily either a font or a system update problem.
I'm wondering if I should get Pacifist and try to reinstall my Mail program. Anyone have any ideas now that I have (hopefully) explained this better?

How can replace IF condition for a Select query in my reports?

IF s_bukrs-LOW = '4312' OR s_bukrs-LOW = '4313' OR s_bukrs-LOW = '4349' .
ELSEIF s_bukrs-LOW = '4310' OR s_bukrs-LOW = '4311' OR s_bukrs-LOW = '4587'.
ENDIF.
What if I want to use select query in place of IF condition, in my report for a Z -table in which I have made entries of ZZUSEREXIT-my progam name ,VAR1-4310,VAR2-4311,VAR3-4312,VAR4-4313,VAR5-4349,VAR6-4587?

HI
U can do this by two ways-
(1) Using Two SELECT statementsie. one for IF statements and second for ELSEIF statements.
Like--
SELECT < field name>,
WHERE s_bukrs-LOW = '4312' OR s_bukrs-LOW = '4313' OR s_bukrs-LOW = '4349'
SELECT < field name>,
WHERE s_bukrs-LOW = '4310' OR s_bukrs-LOW = '4311' OR s_bukrs-LOW = '4587'.
(2) U can do this in using IF with select statements.
This will help u

How could a java process bypass etc\hosts file while doing dns lookup ?

Hi,
I am developing a java web proxy and developer tool [http://www.tcpcatcher.org|http://www.tcpcatcher.org] .
Right now it is working as a none transparent web proxy.
In some situation and for some hosts, I would like to turn it into a transparent web proxy.
Suppose, user's browser and java proxy are running on same host (typically on localhost). An entry is added in etc\hosts file, for example:
127.0.0.1 google.com
So without any change in browser config , if user visits google.com with its browser , http request is received at proxy level.
Now my proxy has to get the actual ip address of google.com bypassing the etc\hosts file (right now the proxy is doing a loop on itself).
Any idea how this could be achieved ?
Am I searching in wrong direction ?
thanks !

This is a shot in the dark, but I'll try anyway.
Take a look at dnsjava (open source, I never played with it).
My understanding is that using this to resolve names instead of normal Java API's would allow you to bypass etc/hosts in the java code
(see [http://old.nabble.com/DNS-Resolve-from-hosts-file-first-then-DNS-Server-td15431381.html]).

FM 9: Cannot apply conditional tags

I've been able to create conditional text tags, apply them, and see the conditional indicators fine in several documents using FM 9. Recently, in a new book, I'm unable to apply conditional tags. I believe I've figured out the new UI, since conditional tagging has worked before. I can create tags and configure them fine, but when I apply them to text, a table, graphic, etc. nothing happens; the text remains unconditional.

What specific version of FM, as shown in Help > About? What O/S and service pack level?
Does FM's built-in Comment condition work for you?
As a test, I'd suggest creating a small test file, create a new condition and apply it to some easily searchable text, e.g. "zzxy" or something, and also apply FM's built-in "Comment" condition to another piece of text, then saving the file as MIF. Then look at the MIF with a text editor, or the excellent freebie MIFBrowser,
http://www.wideman-one.com/gw/tech/framemaker/mifbrowse.htm
and search for the text. You should be able to see whether the condition(s) have been applied to the text correctly (or not), and also see how the conditions themselves are defined in the Condition Catalog entries.
Sheila

How do I apply conditional formatting using SharePoint Designer 2013?

I'm attempting to apply Conditional Formatting to a list view web part via SharePoint Designer 2013, and I can't seem to find the option to do so.
I've a horrible feeling I'm just being daft, but here's what I've done so far:
- Created a new page (I've tried both web part and wiki)
- Added a list "App part" and saved the page
- Checked-out and opened the page via Designer
- Clicked the "Edit file" option
- Selected the XsltListViewWebPart tag
So far I can't find any options to add it. If I open the Conditional Formatting pane via the View menu it tells me the following:
> To use conditional formatting, select an HTML tag, data value, or
> range of text, and then click Create to specify formatting options.
I've tried selecting the web part tags in all manner of combinations with no luck. In previous version I would have simply selected the previewed data rows in the now-absent Preview pane.
Am I missing something?

Create and edit a Wiki Page
Click Inset > Data View and Select “Empty Data View”
Click Inside the <DataSources> tags </DataSources>
Click Insert > Data Source “Your Data Source Name”
Hold down Ctrl button and select the Rows in the order you want them to appear from your “Data Source Details” Window.
After the Rows are selected click on the drop down “Insert Selected Fields as…” at the top of the “Data Source Details” Window.
Select “Multiple Item View” option (This will create the xsl where we need to add the conditional formatting to)
Find the <tr> tag that contains the Row Data. Insert the following right below the <tr> tag:
<xsl:attribute name="style">
<xsl:if test="@FieldName = 'Something'">background-color: #FF0000;</xsl:if>
</xsl:attribute>
I hope this helps. I figured this out by using the old 2010 Designer to figure out the where to place the code and how to do this.

Apply conditional formatting for a textbox in a matrix that contains an expression

I have a matrix that contains one row, and one of the columns in this row (a field ) contains an expression. I know this field is "Textbox24" but anyway, I have created a placeholder for this field and in Placeholder Properties I have given the
label "PD". Note that the Value in this placeholder shows "Expr" because it contains an expression.
I don't think this is relevant, but just in case, the expression is:
=Code.GetPercentageDifferenceBetweenCurrentAndPreviousValue()
where GetPercentageDifferenceBetweenCurrentAndPreviousValue is custom code for the report which returns a decimal value. This works correctly in Preview mode.
I now want to apply conditional formatting on this field so the colour of the font changes depending on the value of the expression. I clicked on the text box of that field, and in Properties > Color > Expression > I entered
=IIF(Fields!PD.Value >= 50,"Green","Black")
When I go to Preview mode I get the error "The Color expression for the text box 'Textbox24' refers to the field 'PD'. Report item expression can only refer to fields within the current dataset scope or, if inside an aggregate, the specified
data set."
I have tried a couple of other forms of the sytax for Fields!PD.Value but it doesn't work. Is my problem a syntax problem or a scope problem, and how do I solve it?
Thank you

From your description, PD is not a field so you cannot reference it as a field. You can do what you want by referring to the textbox:
=IIf(ReportItems!Textbox24.Value >= 50."Green","Black")
"You will find a fortune, though it will not be the one you seek." -
Blind Seer, O Brother Where Art Thou
Please Mark posts as answers or helpful so that others may find the fortune they seek.

Is it possible to apply conditional formatting to a cell (or range) based upon a LOOKUP query to cell values in another sheet.? I want to alter the formatting (i.e., text and/or cell background color), but not cell content.

Is it possible to apply conditional formatting to a cell (or range) based upon a LOOKUP query to cell values in another sheet.?
I want to alter the formatting (i.e., text and/or cell background color), but not the content, of the target cell(s).

Hi Tom,
Your LOOKUP formula will return a value that it finds in the "other" table. That value can be used in conditional highlighting rules. (Numbers 3 calls it conditional highlighting, not conditional formatting. Just to keep us awake, I guess, but it works the same).
Please explain what you are trying to do.
Regards,
Ian.

How can i apply different color for each cell in jlist component?

hi guys i need your help and sorry if my english is very bad..guys how can i apply different colors for each cell in jlist component? for example for the first cell i want to apply color blue, for the second cell i want red, etc... i need your answer guys tnx..
Edited by: ryrene on Mar 21, 2010 12:13 AM

ryrene wrote:
hi guys i need your help and sorry if my english is very bad.
..guys how can i apply different colors for each cell in jlist component? for example for the first cell i want to apply color blue, for the second cell i want red, etc... i need your answer guys tnx..I'll see your tnx, and raise you dve bmbrs & nplm.

Can we apply saved filters to union reports in obiee 11g?

Hi All
Can we apply saved filters to union reports in obiee 11g?
I am able to apply saved filters for normal reports but not for union reports.
The catalog pane is blank, when i click on result columns or each criteria.
The only option i see is to manually create the filters for each criteria, dont i have any choice to use a saved filter for union report?
Is this a bug or something i am unaware of , Please guide me.
Regards
Pranati

I get the same issue. I thought that it's a problem in a security - the catalog pane is clear in a union report. But saved filters work in 11g. I migrated catalog from 10g to 11g and I see saved filters in the conditions. But you may add saved filters directly into xml. Go on Tab Advanced and edit Analysis XML. You have to add code like this
<sawx:expr xsi:type="sawx:savedFilter" path="/shared/FOLDER/_filters/FOLDER/FILTER_NAME" name="FILTER_NAME"/> in a right place.

How can i maintain conditions for vendor sub-ranges

Hi All,
How can i maintain conditions for vendor sub-ranges. These conditions apply to all materials from vendor's sub-range.
Eg: vendor X has the two subranges R1 & R2. I want to maintain separate conditions for R1 & R2. When ever i created PO with ref to particular subrange that Vendor conditions has to be appeared.
How can i achieve this?
Could u pls suggest?
Thanks & Regards
Anilkumar Dalai

Hi,
First Create a Condition Table with field "Vendor sub-range" in M/03
Then create an Access Sequence using this Condition Table in M/07
Then assign this Access Sequence in the Gross Price Condition Type in M/06
Then assign this Condition type in Calculation Schema in M/08
Then maintain condition record for this condition type in MEK1
And then select the appropriate VSR Code in ME21N and check the Pricing.

Can you apply the Rotate Spreads Feature?

Hello,
Hope someone can help me...
In Indesign CS5 you can rotate the spreads and this then gives you the arrow icon next to the spread to indicate that it's a rotated view; what i'm trying to do is apply that rotated spread so it's not just the view, it is actually how the document is - is this possible? and if so how??
(what i'm trying to do is turn the last 100pages (50 spreads) of a 200page book upside down without having to re-layout all the artwork etc)
Hope someone can help?!
Thanks!

Hi,
Thanks for the info - my plan (for this one) is to order the pages as needed and rotate afterwards in acrobat; it's what i was going to do before i thought, can you apply rotations!? It isn't ideal as there's a slight offset needed for the bleeds and alignment so the hanging points etc will differ in the 2 setions (it won't really be noticeable but I'm one of those fussy designers!) and i was going to use it as a template for some other work I'm doing but it's no problem - just wont change my mind next time. It was more a question of can it be done as I think it'd be useful.
Thanks for all the advice

Can we apply note AFTER patch has been applied?

Hello
We have installed a patch set into DEV which is being tested. This patch set contains a note which we need urgently in QA.
Are there any issues with applying the note individually? It will need to go into DEV first - although it's already there - & then be applied to QA as a transport.
We can only apply the patch set to QA when the full testing has been done.
Thanks, Chris

Hi Matt - Thanks for the reply.
I think our problem is that we're quite a long way behind on our patches. Which means that the note we need to apply has many dependencies - all of which I'd need to get into any transport we created on DEV. I could do this but I'm worried I'm likely to miss something.
So we're considering opening up QA & applying the note in there (using SNOTE). It may be a stupid question but how do we open up QA? We assumed it was a change to be made in SCC4 but this is client specific & we have 5 clients on our QA machine (as well as 000 etc).
Thanks for your help. Chris

Which Pattern to apply ? Can Pattern can be applied .. ?

Hi All,
I have base class "BaseClassA" which do all my basic validation of a function. There are approx 10 validations are there.
Now my issue is that I need to add New Validation to the BaseClassA, how ever, I dont want to touch the "BaseClassA" code, as it my new validations is case-by-case, not mandatory like what 10 validations of current BasicClass.
My BasicClass constructor currently calls the all 10 validations now ..
Can I apply any particular pattern for the case ? Or just a subclass strategy will done ?
Can any one comment/suggest on the same
Thanks n Advance
Abhilash

Hi,
Thanks for that quick response.
My BasicClass has got all validations calls in single method, .i,e it cheques for Zero amount , max limit etc ..
if(amount >0 ) {return false;}
if(amount >Limit ) {return false;}
Now in between these 10 validations, as case need my validation to be done as 3rd or 4th .. so it is a Insert one more validation as required.. so a small catch here ..
Else as you have suggested was the simplest approach ..
Regards
Abhi

How can i apply border for fluid grid layout div

How can i apply border for fluid grid layout div

<!doctype html>




<html class="">

<head>
<meta charset="utf-8">
<meta name="viewport" content="width=device-width, initial-scale=1">
<title>Untitled Document</title>
<link href="boilerplate.css" rel="stylesheet" type="text/css">
<link href="CSS/Layout.css" rel="stylesheet" type="text/css">
<link rel="stylesheet" href="flexslider.css" type="text/css">
<script src="https://ajax.googleapis.com/ajax/libs/jquery/1.6.2/jquery.min.js"></script>
<script src="jquery.flexslider.js"></script>

<script type="text/javascript" charset="utf-8">
$(window).load(function() {
    $('.flexslider').flexslider();
</script>


<script src="respond.min.js"></script>
</head>
<body>
<div class="gridContainer clearfix">
<div id="LayoutDiv1"><img src="SJV-Images/Banners/Dark-green-curved-header.png"/></div>
<div id="LayoutDiv2">
<div class="flex-container">
<div class="flexslider">
    <ul class="slides">
      <li>
        <img src="SJV-Images/Stud1.jpg"/>
      </li>
      <li>
        <img src="SJV-Images/Stud2.jpg" />
      </li>
      <li>
        <img src="SJV-Images/Stud3.jpg" />
      </li>
    </ul>
</div>
</div> </div>
<div id="Nav">This is the content for Layout Div Tag "Nav"</div>
<div id="Special_Features"><h3 align="center">SPECIAL FEATURES</h3>
<ul>
<li>
It is one of the oldest school.</li>
<li>It was first started as an orphanage for the children of British soldiers, and later moved to its current location.</li>
   <li>Rich in Anglo-Indian tradition dating back to three centuries.</li>
<li>The campus now has separate buildings within the campus for year 1 to year 8 (Junior and Sub Junior block) and year 9 to year 12 (Senior and   Super Senior block).</li>
<li>The school has montessori facilities in a separate building.</li>
<li>The School also has boarding facilities for students from distant places.</li>
</ul></div>
<div id="History"><img src="SJV-Images/His_Image.png" alt="Hisimage" class="floatleft">
<h3>HISTORY OF OUR SCHOOL</h3><P>In 1750 – a very long time ago,a missionary and a teacher, Christian Frederick Schwartz came to India to work in the Danish Mission at Tranquebar.Due to his own personal charm, genius and integrity, soon he became a trusted envoy to the court of Princes ,both hostile and friendly. He even helped in the training and education of Serfogee Rajah, the adopted son of the Tanjore Raja Tuljagee.</P></div>
<div id="Photo_Gall"><center>
    <strong>PHOTO GALLERY</strong>
</center>
<p><img src="SJV-Images/Photogall.png" width="174" height="70" class="floatright"/></p>
</div>
<div id="News_Events"><center>
    <strong>NEWS & EVENTS</strong>
</center><center>Annual Day<br><center>
    Alumni Meet<br>
    Exam Time Table<br>Parents-Teacher's Meet</center>
</center>
<br></div>
<div id="footer">This is the content for Layout Div Tag "footer"</div>
</div>
</body>
</html>

Can we apply conditions,xception,etc.. on ods while doing reporting.

Similar Messages

Maybe you are looking for