Can we archive data twice from system-Bank master data deleted

We have archived the data of bank after setting it to deletion in program FI_BANKS_WRI.Can i archive same data again from system.

resolved

Similar Messages

  • Can I Archive and Install From Leopard Up-To-Date Disc?

    I'm a Mac newbie, so I apologize if this is an obvious question.
    I purchased my iMac this month, so I received a Leopard Up-To-Date disc for $10. The CD says Upgrade on it, and I can't find any options for what type of install I want to run. I've seen things like Erase And Install, Archive and Install, and Upgrade posted here on the forums, but the only options I have are whether or not to install things like Core Services, X11, etc. Can I not perform an Archive and Install with this disc, and if I can't, is there any chance I could request a full CD from Apple?
    Message was edited by: AceDew

    You should be able to -- when you get to the screen that asks you to choose your installation destination, highlight the drive, then you will see in the lower-left an options buttion. CLick it and you will find three choices: upgrade, archive/install and upgrade install. Choose the one you want and enjoy!
    Keep in mind that when you put the disk in, the system will verify that the DVD is OK -- it takes a few minutes, but it is worth knowing that the disk is not corrupt before you start. Also, repairing permissions seems to take awhile -- just let it happen.

  • How do I keep Firefox from saving bank account data?

    How do I keep Firefox from saving bank account data? I'm running Win7 64-bit. I can't seem to keep Firefox from saving bank account data.

    Also, could you clarify what you mean by "saving bank account data"? Here are some places that Firefox may save data you have viewed:
    ''Firefox's cache:'' Generally speaking, Firefox will cache pages you have viewed so you can go Back to them unless the server instructs Firefox not to store them, or designs the page to reload and check to make sure you are still logged in.
    ''Session history:'' Firefox saves information about your session for purposes of redisplaying your open windows and tabs (and recently closed windows and tabs) in the event of a crash. If you want to restrict what Firefox saves, there might be some settings you can modify, but it depends on your concerns.
    ''Form autofill:'' If you have the form fill feature enabled, Firefox will remember data you enter into forms (usually excluding passwords). This can be turned off, or completely cleared, but there isn't a convenient way to remove just some of the data without an add-on. For example: https://addons.mozilla.org/firefox/addon/form-history-control/

  • ORA-01173: data dictionary indicates missing data file from system tablespa

    Hello
    My Database is 11gR1 and Linux is the OS. Thought of posting it as a new thread as things have changed a lot.
    2 of my database file were lost due to hardware failure. (the datafile do not belong to SYSTEM TABLESPACE) and and the second was datafile for undo tablespace.
    I created control files with command not mentioning the lost datafiles:
    CREATE CONTROLFILE REUSE DATABASE "BSSGLB" NORESETLOGS NOARCHIVELOG
    MAXLOGFILES 32
    MAXLOGMEMBERS 5
    MAXDATAFILES 600
    MAXINSTANCES 10
    MAXLOGHISTORY 1168
    LOGFILE
    GROUP 1 '/DB/app/oracle/oradata/bssglb/redo01.log' SIZE 500M,
    GROUP 2 '/DB/app/oracle/oradata/bssglb/redo02.log' SIZE 500M,
    GROUP 3 '/DB/app/oracle/oradata/bssglb/redo03.log' SIZE 500M
    -- STANDBY LOGFILE
    DATAFILE
    '/DB/app/oracle/oradata/bssglb/system01.dbf',
    '/DB/app/oracle/oradata/bssglb/sysaux01.dbf',
    '/DB/app/oracle/oradata/bssglb/users01.dbf',
    '/DB/app/oracle/oradata/bssglb/bss01.dbf',
    '/var/oracle/oradata/bssglb/bss02',
    '/var/oracle/oradata/bssglb/system02.dbf'
    CHARACTER SET US7ASCII
    I have all the files mentioned in the datafile section of the above command.
    But somehow when i try to open the DB, first it asks for the media recover. When i recover database then it disconnects database saying:
    ERROR at line 1:
    ORA-01092: ORACLE instance terminated. Disconnection forced
    Process ID: 4768
    Session ID: 170 Serial number: 5
    Contents of the alert log file are:
    Beginning crash recovery of 1 threads
    parallel recovery started with 3 processes
    Started redo scan
    Completed redo scan
    1 redo blocks read, 0 data blocks need recovery
    Started redo application at
    Thread 1: logseq 7, block 2, scn 20356182450
    Recovery of Online Redo Log: Thread 1 Group 1 Seq 7 Reading mem 0
    Mem# 0: /DB/app/oracle/oradata/bssglb/redo01.log
    Completed redo application
    Completed crash recovery at
    Thread 1: logseq 7, block 3, scn 20356202453
    0 data blocks read, 0 data blocks written, 1 redo blocks read
    Sun Feb 20 08:16:23 2011
    Thread 1 advanced to log sequence 8
    Thread 1 opened at log sequence 8
    Current log# 2 seq# 8 mem# 0: /DB/app/oracle/oradata/bssglb/redo02.log
    Successful open of redo thread 1
    MTTR advisory is disabled because FAST_START_MTTR_TARGET is not set
    Sun Feb 20 08:16:23 2011
    SMON: enabling cache recovery
    Errors in file /Oracle/app/oracle/diag/rdbms/bssglb/bssglb/trace/bssglb_ora_4550.trc:
    ORA-01173: data dictionary indicates missing data file from system tablespace
    Error 1173 happened during db open, shutting down database
    USER (ospid: 4550): terminating the instance due to error 1173
    Sun Feb 20 08:16:25 2011
    Instance terminated by USER, pid = 4550
    ORA-1092 signalled during: alter database open...
    ORA-1092 : opiodr aborting process unknown ospid (4550_182910338848)
    Sun Feb 20 08:16:26 2011
    ORA-1092 : opitsk aborting process
    Guys please help me out of this situation.
    Regards, Imran

    STOP opening new threads for ongoing solution to SAME problem
    Re: I have copy of data files! How to install and add these files to database!
    Re: Failure of network storage!
    Re: I have copy of data files! How to install and add these files to database!
    Handle:      misterimran
    Email:      misterimran
    Status Level:      Newbie
    Registered:      Jan 15, 2002
    Total Posts:      1,109
    Total Questions:      130 (115 unresolved)
    so many questions & so few answers!
    Edited by: sb92075 on Feb 19, 2011 7:49 PM

  • Can't load Network Settings from System Preferences

    For some reason I can't load Network Settings from System Preferences anymore - it just stalls with the bar showing "Loading Network" and doing nothing. This is happening in conjunction with a new inability to connect to a network printer - it won't show up on the list of printers, even when I manually enter the IP address. Something is obviously mucked up - can anyone tell me what it might be & how I can fix it? Thanks!

    I was able to fix this myself by using one of the techniques suggested here for a different problem. Basically I went into Library/Preferences/System Configuration and deleted networkinterfaces.plist, preferences.plist & com.apple.nat.plist. All were rebuilt when I restarted and went to System Preferences/Network and I was able to load the Network Settings. This didn't fix the problem with my printer, but at least it got the settings up.

  • How to avoid the House Bank when creating a vendor from the HR master data?

    Hi all,
    I am using T-code PRAA in order to generate the vendors from the HR master data.
    It works fine, but the programs tries to record a House Bank in the company code view of the vendor.
    Which I don't want.
    Does anyone know how to get rid of the house bank ?
    I already tried, by deleting the entry in the characteristic TRVHB, through PE03, but then, the file is not generated successfully.

    Hi Madhuri,
    Best way to avoid such problem is to use TAB delimited file instead of comma separated data. Generally TAB does not appear in data.
    If you are generating the file, use tab instead of comma.
    If you cannot modify the format of file and data length in file is fixed character, you will need to define the structure and then move data in fixed length structure.
    Regards,
    Mohaiyuddin

  • Delete complete bank master data

    Hi Gurus,
    We uploaded the bank master data into our system. Sadly it was decided that we have to change the bank key. Now all the master data is set up wrong.
    Does someone knows, how to delete the data out of the system. Not only setting the deletion flag!
    Please sent me your answers asap.
    Thanks in advance
    Black

    Dear:
                 Please use FI06 to set deletion flag to bank master data, doing so system doesn't actually delete the record from the table, you need to run archiving to actually delete the record. Please refer to the following link
       http://help.sap.com/saphelp_40b/helpdata/en/c7/a8946443dd11d182b30000e829fbfe/content.htm
        Regards

  • The error about loading data from ODS to master data.

    hi,experts,when I load the data from ODS to master data,there is an error messege:
    " InfoSource 8ZPA_0022 is not defined in the source system.
         Message no. R3005
    Diagnosis
         The InfoSource 8ZPA_0022 specified in the data request, is not defined
         in the source system.
    System response
         The data transfer is terminated.
    Procedure
         In the Administrator Workbench of the Business Information Warehouse,
         update the metadata for this source system, and delete the InfoPackages
         belonging to InfoSources that no longer existing ."
    But,the InfoSource 8ZPA_0022 is not problem,how can I do？thanks.

    Hi,
    as suggested by the message, did you update the meta data by doing a replication of datasources for the source system 'myself'? If not, do so and reactivate the communication structure. Then reload.
    regards
    Siggi

  • Derivation of Cost Center from WBS element MAster data at the time of invc.

    dear all,
    during invoice postings with wbs element account assignment system do not derive assigned cost center from wbs element master data.
    how can the system derive the cost center automatically??
    Is there any BADI available to this issue.
    regards
    saqib

    Dear,
    WBS is Real and cost center in the master data is for statistical postings i.e. responsible cost center in WBS.
    How to make substitution (OKC9) deriving the cost center in document line items / invoice posting etc.
    Kindly give detail process for its configuration steps and is there any BADI available which can be useful in this regards?
    Regards,
    Saqib Usman

  • Data load stuck from DSO to Master data Infoobject

    Hello Experts,
    We have this issue where data load is stuck between a DSO and master data infoobject
    Data uploads from DSO( std) to master data infoobject.
    This Infoobject has display and nav attributes in it which are mapped from DSO to Infoobject.
    Now we have added a new infoobject as attribute to the master data infoobject and made it as NAV attri.
    Now when we are doing full load via DTP the load is stuck and is not processing.
    Earlier it took only 5 mns of time to complete the full load.
    Please advise what could be the reason and cause behind this.
    Regards,
    santhosh.

    Hello guys,
    Thanks for the quick response.
    But its nothing proceeding further.
    The request is still running.
    earlier this same data is loaded in 5 mns.
    Please find the screen shot.
    master data for the infoobjects are loaded as well.
    I can see in SM50 the process at P table of the infoobject the process is.
    Please advise.
    Please find the detials
    Updating attributes for InfoObject YCVGUID
    Start of Master Data Update
    Check Duplicate Key Values
    Check Data Values
    Process time dependent attributes- green.
    No Message: Process Time-Dependent Attributes- yellow
    No Message: Generates Navigation Data- yellow
    No Message: Update Master Data Attributes - yellow
    No Message: End of Master Data Update - yellow
    and nothing is going further in Sm37
    Thanks,
    Santhosh.

  • Bank Master Data ( Creation of new Account )....

    Dear SAP Gurus,
       Good morning to all,i have one doubt regarding creating a new Bank Master Data in Production, please help me.My user has a requirement which is like one Cash Credit Account has been opened with SBI bank where with the same bank and branch there is already an existing Current Account,now my client wants from me to create a bank master data for the new bank Cash Credit  Account( as he is saying that he has to maintain BRS).
       Now i have to know that what is the best practice in sap whether i should create one more  master data for the new Account or i should attach the new account with the existing Bank Master?
    Please help it is urgent.I'll be waiting for your valuable suggestion.
    Regards
    Rajiv Kapur

    Hi Rajiv,
    Creation of new house bank will not serve purpose in better way, it is only required when there is a complext scenatio in check printing but that does not appear in your case.
    So, create a new Bank Account in the existing House Bank, this will be included in Bank Reconciliation. Moreover, creation of Bank account instead of House Bank will also ease some maintainance in Bank Reconciliation statement configuration.
    Regards,
    Chintan Joshi

  • 'Role Data' tab appearing twice in Business Partner master data

    Hello,
    The 'Role Data' tab is appearing in the master data of business partner for TWO times. The contents of both the tabs are identical. So I know that the only thing that I probably need to fix is the screen sequence. I have followed note 695714 and could not find anything wrong. Can someone please help me with the following queries:
    1. Identifying where we maintain the tab sequence for business partner master data, ie the transaction code or the path in BDT
    2. What is the name used in BP for the 'tabs'... I mean they are not called TABS but I suppose as Screens or Screen Sequence. So, what is the correct name for a Tab in BP master data.
    3. How I can hide the extra tab of Role Data from the BP master data screen
    4. How do we control the sequencing of the tabs, ie whether the address tab should be the first one or the third one or the last one.
    Regards
    Suvarghya Dutta

    Hi Kiran,
    Can you post the query here, which you used in fromatted search.
    I believe you mean to say that by this formatted search, user will have flexibility to choose the field and enter the search value.
    thanks in advance,
    Samir Gandhi

  • Importing Bank Master Data in AP

    Hi,
    We have a requiremnet at client to import Bank Master data. As we don't have a standard interface to do that in AP,I would appreciate if anyone can let me know information on this.Any of you have done this before please share your experiences on this like flat file structure, mandatory fields ...etc
    Thanks
    Ravi

    > Hi Srdjan.
    >
    > Are you familiar with the MDM Import Manager?
    >
    > Best regards,
    > Nir
    Hi
    I haven't tried the MDM Import manager..but I solved it with LSMW. I created a recording for one record entry, then I specified the rest of the data in a text file, and passed it to LSMW..It worked (almost) perfectly!
    Thanks for the suggestion though, I'll give it a try some other time
    Best regards,
    S.

  • Can I recover SMS messages from iCloud that I accidentally deleted today?

    Can I recover SMS messages from iCloud that I accidentally deleted off my phone today?

    Sorry but the only thing you can do with a backup to iCloud is restore the entire backup to an iOS device. It is an all or nothing thing. There isn't a way to get to them using a computer or to access just the backed up text messages. If you also backed up to iTunes, there are 3rd party utilities that will extract data from a backup made using iTunes.

  • I have purchased a new iMac, with Safari 5.0.5, but it won't retain bookmarks, I thought I can download a new Safari from Apple. So I deleted Safari from the application folder.

    I have purchased a new iMac, with Safari 5.0.5, but it won't retain bookmarks, I thought I can download a new Safari from Apple. So I deleted Safari from the application folder.
    Then I tried to download Safari from Firefox but after finish download, what I got was a dmg file, with a pkg icon (an opened box) and it can't be installed. Same with Google Chrome.
    My question is: how can I download Safari? And will it retain bookmarks?

    Reinstall Safari from the Optional Installs.pkg on your Mac install disc that came with your iMac. Or in your case, you use Pacifist to extract the Safari app from the .dmg file.
    To bookmark a webpage:
    Go to the webpage you want to bookmark. If you use tabs, you can open multiple webpages in tabs to bookmark them as a collection.
    Choose Bookmarks > Add Bookmark, or Bookmarks > “Add Bookmarks for These Tabs.”
    Type a name for the bookmark or collection in the dialog that appears.
    Specify where you want to keep the bookmark or collection. You can add it to the bookmarks bar, the Bookmarks menu, or to a collection if you have created any.
    Click Add.
    To add a bookmark quickly, click the Add button in the toolbar, or drag the webpage’s icon from the address field to the bookmarks bar.
    To see your bookmarks, choose Bookmarks > Show All Bookmarks.
    In the future, rather then deleting an app, come here and ask for help first. More times then not, you will save yourself time and trouble.

Maybe you are looking for