Can we assign same basic type to different message type in ALE

Hi Expert
can we assign same idoc type to different message type?

Hi,
Yes you can assign the one idoc type to multiple message type. Message type nothing but it represents the kind of data we transfer.But idoc type is the format in which we transfer data. As an example in Messager types "ORDERS" and "ORDRSP" both indicates the order related data, and in both case idoc type can be ORDERS01, ORDERS02.............
Thanks,
Asit Purbey.
Edited by: Asit Purbey on Oct 12, 2009 3:07 PM

Similar Messages

Can we assign same GL to Different house bank

Can we assign same GL to Different house bank

Hi Preeti,
Please change FSG of your bank GL account.
Make Own Bank field as optional for FSG G005.
Henceforth, you can find House Bank field in the more data which is in the header for F-02.
So, house bank details you are entering for each transaction
Based on these details you can develop a simple query report from BSEG table.
Rgds
Murali. N

In Bte can i use same Product for 2 different process

in Bte can i use same Product for 2 different process

hi
as per i know yes but since there r two type of interface behaviour is defferent .
For
Publish & Subscribe interfaces
if any event occur in this type both the process can work simultaneously and they will not intervene each other
whereas in
Process interfaces
at an time any one process can be active.
Reward if usefull
Cheers
Snehi

How to assign different Message Type to different Doc. Types

Hi,
Can anyone tell me how can I assign different Message Type to different Doc. Types e.g. in ME21N. So that whenever the Doc Type is selected the respective Message Type is automatically assigned.
Lucky

hi there
follow this path
spro - materials management - purchasing - messages - output cntrol - message types - define message types for p/o
then
spro - materials management - purchasing - messages - output cntrol - message determination schemas - define message determination schemas for purchase order
then
go to
mn04
give doc type - enter
enter partner role & other parametrs

Can we use same number range for different fields

can we use same number range for different fields. how can we see the number range defined for a particular field

Hai,
Yes you can have same number range for different fields by using the same domain to the data elements that are user to your two fields.
To see the range:
Go to SE11,Type table Name open it-->double click on the DataElement adjasent to the field name ,You will get Domian ,Double click on Domain You will get Domain.There See Value range option .Value range cam also be defined by Value Table which will also at the Doamin level.
Reward points if it helps you.
Regds,
Rama.Pammi

Can not assign ONE PFCG ROLE TO DIFFERENT ROLES

Hi
First I created a new Conf Key then I created a new NAV BAR by coying the standard Makrting and Sales PRO Nav Bar.
Then I am trying to create a new buiness role( lets say ZMARKETING PRO) by copying the standard Marketing role and assigned my own created NAV BAR and Con KEY.
I am facing an error
" YOU CAN NOT ASSIGN ONE PFCG ROLE TO DIFFERENT ROLES"
Just want to know the background of this error. Any help would be appreciated and points would be rewarded

Hello Sajjid,
Sorry we are not aware of the terminology used in your organization.
Can you be more specific:
are you doing Role Release,
Org Filter changes or creating CHILD (derived) role
Please generalise your problem.
Regards,
Surpreet

IDOC - IDOC scenario with different message types

Dear Experts
I will like to have your expert opinion in the following question:
I have an IDOC -> IDOC scenario. Wherein at the destination system I have a message type which does not exist at the source system.
Also the IDOC type at destination system does not exist at the source system.
Let say, I will be creating custom message type at source system (Z****) and will also be creating the custom IDOC type (z****) with the same structure, definition as the destination.
Now my question is, even if there will be different message types and different IDOC types but with the same structure (the segment level definition
and field attribute remains the same at both the system). The difference lies with the names. And I have proper mapping though process code.
Will I be able to receive the IDOC correctly at destination?
Thanks & Best Regards

Hi All
I figured out the answer myself now.
You got to have same name for message type. All of you said this and this is rite.
Coming to IDOC type, I did not really got clear idea on this from this discussion.
But after working on a scenario, I learnt that, you can have different names for IDOCs, but provided that, whichever IDOC type the source system is sending, the same type must exist in your destination as well. Otherwise, system wont process your IDOC. But from mapping point of view, its upto individual how do thay handle mapping inside inbound process code for different idoc types / strucutes.
Lesson learnt by me, ideally try to keep same name for both logical message and idoc type at both source and destination. If possible try to keep the structure level also the same. This is my view, learnt it the hard way.
Cheers
Shane

Assign an output type to a message type

Hi all,
How do I assign an output type to a message type?
Thanks in advance.
JM

You maintain the output type determination settings for the inbound and outbound delivery handlers, so that output types can be determined for deliveries, pursuant to the message control mechanism.
 a. You maintain the output types in Customizing for Logistics - General ->upply Chain Planning Interfaces (SCPI)-> Auto-ID Backend Integration->IDoc Processing ->Operational IDocs -> Output Type Determination -> Output Type Determination for Inbound/Outbound Deliveries-> Maintain Output Types.
reward points if it is usefull....
Girish

Want to add multiple idoc type with single message type.

Hi Gurus,
I have a problem. I want to add multiple idoc type with single message type in WE20.
How we can do this in WE20 or is there any other way to do that?
Please help me.
Thanks in advance.
Srimanta.

hi,
basically in partner profile i.e. in we20 , we add details to the receiver / sender port that we have created using we21.
so what exactly we do in that is that we first use the message type for those idocs that we have created.
now based on those message type we create a process code. now this is the reason why you cannot apply several message types with the same name in we20... as process code is unque for each message type.
so thats why you can only assign the same message name to several idocs in we82 and then in we20 define the process code for that message type.
it will solve your problem.
hope this will help you!!!
Thanks & regards,
punit raval.

Types of fault message types

Can someone tell me the different types of fault message types available in XI?

Hi,
Fault Message Types
are used only for returining messages form the inobund side (application)
http://help.sap.com/saphelp_nw04/helpdata/en/dd/b7623c6369f454e10000000a114084/content.htm
if you want to create error handling for a mapping
you can use transformation step (in a BPM)
add a block and catch the mapping error inside this block
(and for instance send a file from this exception branch
Refernces Fault message types for the Exception handling .
Fault message types corresponding to the standard SOAP Fault type can be included (execepted in the outbound Asynchronous case)
A fault message is a message that describes an application-specific error situation.
Fault message types are designed for application-specific errors that occur on the inbound side and that are reported back to the sender or persisted in monitoring.
· In the synchronous case, when an application-specific error occurs on the inbound side, instead of sending a response message back to the sender, the application can send a fault message to handle the error.
· The fault message of the application for an asynchronous ABAP server proxy is persisted for monitoring. In the case asynchronous of Java server proxies, the fault message is part of a negative application acknowledgement (see Acknowledgments).
Application-specific means that the application on the inbound side triggers the error itself because, for example, the request message did not contain sufficient information.
http://help.sap.com/saphelp_erp2005vp/helpdata/en/dd/b7623c6369f454e10000000a114084/frameset.htm
http://help.sap.com/saphelp_erp2005vp/helpdata/en/5d/a45c3cff8ca92be10000000a114084/frameset.htm
Please see the below links
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/ee5bc490-0201-0010-e9b5-a258cf083bca
/people/sap.user72/blog/2006/01/16/xi-propagation-of-meaningful-error-information-to-soap-client
/people/shabarish.vijayakumar/blog/2006/11/02/fault-message-types--a-demo-part-1
Thanks
Swarup
Edited by: Swarup Sawant on Mar 28, 2008 3:05 PM

Urgent - Idoc type and the Message type

Hello
Its very urgent. I want to know the basic idoc type and the message type used for EDI 894 transmission (Delivery / Return Base Record). Please respond at the earliest.
Thanks in advance

HI
Pratibha
How are you ?
Please check the below links:
http://scn.sap.com/thread/990524
http://www.erpgreat.com/pm003.htm
http://scn.sap.com/thread/1386811
http://scn.sap.com/thread/1078741http://www.erpgreat.com/plant/what-is-equipment-master.htm
http://benxbrain.com/en/index.do?onInputProcessing%28brai_object_thread%29&001_threadid=0000835100&001_boardtype=01&sysid=PI1&pgmid=R3TR&object=TABL&obj_name=EQBS&child_param=
Mutti

Process code or Fmodule for Idoc type PREQCR101 and message type PREQCR1

hi all,
Iam unable to find the process code or function module for the idoc type PREQCR101 and message type PREQCR1 for inbound process.
help from some one would be a lot appretiated.

Hi,
Go to transaction WE57 and you can find the processing FM and message type that are associcated to the IDOC type.
For process code if it is Inbound check WE42 and outbound check WE41 transactions
Regards
Shiva

Same Input name with different data type cause the reflection exception

I have a proxy contains couple RFCs. Two RFCs contain an argument named IN_COMPANY_CODE with data type of ZTRE_FX_BUKRSTable. Another RFC contains the same argument name of IN_COMPANY_CODE but hold different data type (String). All RFCs are in the same proxy. Complie and build the application with no issue.
But when I ran the RFC, it generates the reflection exception below:
Method SAPProxy1.Z_F_Tre_R_Pre_Trade_Fx can not be reflected. --> There was an error reflecting 'In_Company_Code'. > The XML element named 'IN_5fCOMPANY_--5fCODE' from namespace '' references distinct types System.String and MSTRFOREX.ZTRE_FX_BUKRSTable. Use XML attributes to specify another XML name or namespace for the element or types.
I realize the conflict introduced by the same name with difference data type. But I would like to know if this is fixable as a bug or if there is any best practice and/or some manual intervention to make it work.

Please install fix from OSS note 506603. After this, right-click .sapwsdl file and select "Run custom tool".

Different Message Type, Different Namespace, same structure

Hi,
we have the scenario:
We have a message type (with our namespace) in a regular file-tofile scenario.
The sender is sending us an xml-file from his PI that has exactly the same structure and same xsd.
Except, that his message type name and namespace are different.
What is the scenario to get his message type and namespace mapped to my message type and namespace in a regular file-to-file scenario?
Thanks
hs

Hi, you could also remove namespaces with XMLAnonymizerBean, then you only need to adapt the message type.
Alternatively you can import the external definition of the message and create a mapping for that. You can reuse your existing message mapping, just do a copy and change the message type in the signature. Then you can correct structural inconsistencies automatically in order to adjust the mapping to the changed namespace and message type. Or even better, create a mapping template for the structure which you use in both message mappings. Like this, you have a separate interface and mapping for the file and thus a clear separation of message flow.
Regards, Martin

Can Same IDOC be sent to same Receiver with two different Message Mappings

Hello Experts,
Wierd doubt but want to confirm from you people.
Scenario:
One R/3 Sender
SAP XI :
One external Receiver :
IDOC is sent from R/3 to external receiver via SAP XI.
One interface has already been developed for the above scenario.
Now client wants another interface to be developed for the same IDOC. Might be the values would be different for some specific fields.
Doubt:
Is it possible to send one similar IDOC to one target system with two different Message Interfaces?
Ex: Created Message Interface 'A' and correspoding Message Mapping with an IDOC
Created Message Interface 'B' and correspoding Message Mappingwith an IDOC
Values would be different in the IDOC and would be triggered from SAP R/3. Basing on the specific value of a field in the IDOC , can we trigger a different Message mapping for the same receiver?
I donot see any reason in developing a new interface for the same IDOC but as per the situation mentioned above, can it be done?
Thank you
Alex.

Create two interfaces for target side.
If you want only one target interface should get data.
You can use simple interface determination. Use the condition tab and specify the field there but the value should be constant. e.g. if field has value EN it should go to First interface and if Field has value != EN it should go to second interface.
If you want to divide your message in to both target interfaces.
Multimapping also can help but only if both of your target interface need idoc data.
You can use ifexist standard node functions from UDF to choose between the field.
For multimapping you can go to messages tab in the message mapping and can add interfaces using + sign.
then when you see the design part you will see two messages.
Now Start with receiver determination in ID and create one receiver determination for the sender and receiver, this shows you have only one receiver.
In interface determination you have to choose extended and choose your mapping designed.
then both your interfaces automatically would appear.
Create two receiver agreements and one sender agreement.
thanks
hemant
Edited by: Hemant on Aug 28, 2008 12:29 AM

Can we assign same basic type to different message type in ALE

Similar Messages

Maybe you are looking for