Can we cascade PID and PIV loops to control the servo motor

hi
presently we are using PID loop for controlling the motion of a servo motor using ni-7352 card. We are not able to receive the desired response from this implemenatation. So is there any other alternative like using a PIV loop or using PID cascaded with PIV to achieve a better response. If there is possibility help us to proceed further with this.
also tell us which is more reliable 1)using PID alone 2) Using PIV Alone 3) using PIV and PID cascaded.
please mail to this query to [email protected]

Sidda,
before you start thinking about advanced control architectures I want to ask you to tell me some details about your system behavior and the control parameters that you have used. I have used 73xx boards for very dynamical systems and I have always been able to find control parameters that resulted in a very fast and stable system behavior.
For the case that you need some help with tuning please have a look at this link. In many cases autotuning doesn't result in good system behavior but you will find a lot of interesting hints about the manual tuning process there (e. g. that increasing the Kd gain typically results in a better damped system).
If this doesn't help please attach some screenshots from your step response and the control parameters that you have used.
Best regards,
Jochen Klier
National Instruments Germany

Similar Messages

Accelerometer sense tilt then interface with USB-6008 and generate PWM to control M995 servo motor

hi everyone,
currently im doing a final year project in LabVIEW using USB6008. my project involve of sensing the tilt from accelerometer and convert the tilt into PWM to control the turning of servo motor.
accelerometer that im using is ADXL322 which has Dual axis ±2g sense range
servo motor that im using is M995. when the servo motor in neutral position it required 1500microseconds, while it turns 90degree it requires 2200microseconds and whilw it turns -90degree, it requires 800 microseconds.
currently im facing problem in generating the PWM signal to control the operation of servo motor.
attachment is my VI design that i have done to date.
the program is about attracting tilt range from accelerometer using USB NI 6008 and then convert the tilt into angle in degree, and after that generate PWM to control two servo motor.
hopefully there is somebody can help me on this. thanks.
Attachments:
FYP.vi ‏253 KB

currently i need to generate PWM to control servo motor model MG995. but i am facing problem in generating the PWM in between 800usec to 2200usec to control the rotation of the servo motor. is there any example for me to refer.
below is my VI that i have done to date.
hopefully somebody can identify my mistake because my VI is not able to turn the servo motor.
Attachments:
pwm.vi ‏128 KB

TS2446 So I have an iphone and for some reason I don't know the password for my Apple ID so I can't download apps and I don't have the password to my email to change it and I don't know the secret questions , what can I do to make a new Apple ID ?

So I have an iphone and for some reason I don't know the password for my Apple ID so I can't download apps and I don't have the password to my email to change it and I don't know the secret questions , what can I do to make a new Apple ID ?

I have the same problem - it is maddening. I rely on this iPad for work so this is not just an annoyance! The above solutions of changing the appleid on the device or on the website do not work.
The old email address no longer exists - I haven't used it in a year probably and I no longer have the account. I logged into the appleid website and there is no trace of the old email address so there is nothing that can be deleted or changed there. On the iPad there is no trace of the old email address so nothing can be deleted there either. I have updated the iPad software and the same problem comes right back. Every 2 seconds I am asked to log in using the old non-existent email. The device is currently useless.
The only recent change to anything was the addition of an Apple TV device, which was set up using the correct login and password.
Does anyone have any ideas? The iPad has been backed up to the iCloud so presumably it now won't recognize the current iCloud account? So restoring may notbe an option?

HT4623 My texts have stopped getting through to one of my contacts. I can phone him and I can receive his calls and messages. I am the only one of his contacts whose texts are not getting through. We have both restarted our iphones but the problem contin

My texts have stoipped getting through to one of my contacts. I can phone him and I can receive his calls and messages. I am the only one of his contacts whose texts are not getting through. We have both restarted our iphones but the problem continues.

Have you talked to your carrier (or your friend to his)? Could be an issue at their end.

I've done a project on iMovie, after it finished finalising, i just closed iMovie, now i think i've lost all my work because i can't find it and when i found it, the movie was just black - please help

I've done a project on iMovie, after it finished finalising, i just closed iMovie, now i think i've lost all my work because i can't find it and when i found it, the movie was just black - please help

Hi
More info please
• Free space on - Start-Up (Mac OS) Hard Disk ? How much ?
• Any other hard disks connected ? Formatted as ?
Yours Bengt W

So I forgot the answers to my security questions and in order to reset them I need to answer them? Help? I can't buy anything and I don't see the option to resend them...

So I forgot the answers to my security questions and in order to reset them I need to answer them? Help? I can't buy anything and I don't see the option to resend them...

The reset link will only show if you have a rescue email address (which is not the same thing as an alternate email address) set up on your account. If you aren't getting the link then that implies that you don't have one and you won't be able to add one until you can answer 2 of your questions - you will need to contact iTunes Support or Apple to get them reset.
e.g. you can try contacting iTunes Support : http://www.apple.com/support/itunes/contact/ - click on Contact iTunes Store Support on the right-hand side of the page, then Account Management , and then 'Forgotten Apple ID security questions'
or try ringing Apple in your country and ask to talk to the Accounts Security Team : http://support.apple.com/kb/HE57
When they've been resetyou can then use the steps half-way down this page to add a rescue email address for potential future use : http://support.apple.com/kb/HT5312 . Or, if it's available in your country, you could change to 2-step verification : http://support.apple.com/kb/HT5570

How can I flip/mirror and image horizontally/vertically in the same programme? Is there a keyboard s

How can I flip/mirror and image horizontally/vertically in the same programme? Is there a keyboard shortcut? Mac, latest version.
Thanks in advance..

Rola.AlGhalib wrote:
…but figured how can an editing software not have the simplest things…? …
Bridge is categorically NOT "editing software". It's just a file browser, no more and no less. Period.
Bridge does not "edit" anything. Bridge doesn't even open anything. It just hands files to the appropriate application, whether this be Adobe Camera Raw, Photoshop, Illustrator, Acrobat, InDesign, or even Microsoft Word.
No, there will most likely never be "an update" for this.

I have iphone 4 and it connect to some wireless networks and some others are not visible while other lphones can find these networks and i tried to restart the phone many times and there is no result, kindly advice

i have iphone 4 and it connect to some wireless networks and some others are not visible while other lphones can find these networks and i tried to restart the phone many times and there is no result, kindly advice

Some updates and clarifications:
1. I already have my 2.4 channel fixed.
2. Wireless network name is 8 alphanumeric characters; no spaces
3. Already using WPA2 security with a 10 alphanumeric key (again, no spaces)
4. I am running Airport Utility 6.0, Mac OS version 10.7.4
I should also say that these problems started happening less than a month ago...prior to that all devices where working normally.
An added update: My two e-readers (nook ST and Kindle 3) are also refusing to connect...perhaps confirming that I have 2.4 GHz issues?

How to make the servo motor to move in steps of set degrees and stop

how to make the servo motor to move in steps of set degrees and stop

Hi,
I think the following document would be a good starting place: NI Developer Zone Tutorial: Single Axis Moves It includes links to several example programs that you may find useful for your application. Keep in mind that there are many motion examples that ship with LabVIEW as well.
I strongly recommend that you check out the following documents as well:
NI Developer Zone Tutorial: Simple Point to Point Motion
NI Dev
eloper Zone Tutorial: Hands-On Motion
NI Developer Zone Tutorial: Axis Settings for Motion Controllers
These tutorials will help give you a good foundation for understanding motion control systems.
Best wishes!
Dawna P.
Applications Engineer
National Instruments

I can't update Instuments and Apple Loops

I don't know what is going on here with the Garageband update "Instruments and Apple Loops".
Everytime when I try to install I got this error below:
"The update “GarageBand Instruments and Apple Loops” can’t be installed.
The update could not be verified. It may have been corrupted or tampered with during downloading. The update will be downloaded and checked again the next time that Software Update runs."
I tried many times and no sucess.
I tried to repair the HD and permissions and still nothing.
This only occurs with this update, the others work fine.
I search the forum for same problem and I found a lot of treads tell to choose the third option ( install from DVD) but I dont have this option here in my Garageband. When I click in a instrument the garageband show me a window with two options. "Download Now" or "Download Later".
Any suggestion ??
Thanks
Adriano
Macbook Pro i7 2.2GHz
Mac OS X 10.7.4
4Gb Ram
300+ free HD
Garabeband 6.0.5

HI Dahoveed,
When i bought this macbook the software is OS X Mountain Lion (Early 2011)
btw i got what you mean.
Thank You.

I can't update Garageband and Apple Loops 1.0 on apple store, I don't understand why I get an error?

I can't update my Garageband and Apple Loops 1.0' , as it comes up with error 502? I don't understand what this is, or what it means. I need to update this so that I can use a wider variety of effects, so it is crucial I update it.

Hello, mitcheb.
Thank you for visiting Apple Support Communities.
The applications that were downloaded are licensed to this old Apple ID. Any updates that need to be processed for these apps will need to be processed using this Apple ID password. You cant attempt to reset that password for the Apple ID via the steps in the first article below. If you need assistance with this, see the second attached article. You can also delete the applications in question and download them again with your new Apple ID. However, this will cause any application data in those applications to be deleted and you may be charged if these are paid for applications.
Apple ID: If you forget your password
http://support.apple.com/kb/ht5787
Apple ID: Contacting Apple for help with Apple ID account security
http://support.apple.com/kb/HT5699
Cheers,
Jason H.

My computer says firefix is running....I can not find it and when I click on the icon it will not open. What can I do?

I can not get firefox to open when I click the icon. A box appears and tells me firefix is running but I can not find it anywhere. I have tried to delete it and everything else I can think of and it will not open. Please tell me what I can do.
Thank you Lisa Brown

I used to have this problem on my old XP computer, too. The easiest way to fix it is to restart your computer. Use Shutdown and restart. This will stop the firefox process that is hanging and won't show up on your screen.
If you are somewhat computer literate, you can look at all your running processes by pressing Ctrl Shift Esc all at once using the three finger salute. Look at the list of processes to find firefox, highlight it, and select end process. Then go back and click on your shortcut to your firefox to regain control and display it on your screen.
Be sure to upgrade to the latest version of firefox, Version 5. It works much better than previous versions.
Fred

Can Express 9 play and record multiple instruments at the same time?

I have logic express 9 and was told with my interface that I can play and record different instruments at the same time on Express 9. Is this true because I have spent a long time trying to figure out how.

Hi,
to record multiple Inputs at a time, open up the appropriate number of audio tracks. Now for each track, select the correct Input in the Channelstrip.
Now, ARM all these tracks for recording by clicking the little red R in the track header or channelstrip. Now if you hit record, all these tracks should record simultaneously their respective inputs.
All other existing tracks should playback while recording.
Fox

I need to reset my Apple ID (a Yahoo account). My problem is the Yahoo account is disabled and can't be recovered and I don't remember the answers to the security questions. How can I reset my password?

I had to reset my IPhone device to the factory setting, but when I wanted to start using the IPhone, it requires the original Apple ID which I do not recall the password. I tried to reset the password by receiving it through my Yahoo account (Apple ID) I found out that the email has been disabled due to the long period I didn't use it and can not be recovered moreover I do not remember the answers to the security questions.
I need help on how to reset my Apple ID password as I cant not use my IPhone any more.

Alternatives for Help Resetting Security Questions and/or Rescue Mail
     1. If you have a valid rescue email address, then use this procedure:
         Rescue email address and how to reset Apple ID security questions.
     2. Fill out and submit this form. Select the topic, Account Security. You must
         have a Rescue Email to use this option.
     3. This is the only option if you do not already have a valid Rescue Email.
         These are telephone numbers for contacting Apple Support in your country.
         Apple ID- Contacting Apple for help with Apple ID account security. Select
         the appropriate country and call. Ask to speak to the Account Security Team.
     4. Account security issues almost always require you to speak directly to an
         Apple representative to securely establish your identity as the account holder.
         You can set it up so that Apple calls you, either immediately or at a time
         convenient to you.
            1. Go to www.apple.com/support.
            2. Choose Contact Support and click Contact Us.
            3. Choose Other Apple ID Topics and choose the appropriate topic for
                your issue.
            4. Follow the onscreen instructions.
         Note: If you have already forgotten your security questions, then you cannot
         set up a rescue email address in order to reset them. You must set up
         the rescue email address beforehand.
Your Apple ID: Manage My Apple ID.
                        Apple ID- All about Apple ID security questions.

My Wifi reception is now weak after removing mackeeper, how can I fix it and is it related to the removal of mackeeper?

My macbook pro Wifi worked fine for a long while with the same router in place. I loaded mackeeper on my machine and had no problems until the license expired. I when through the steps to remove mackeeper, the Wifi went then from not working at all to working with very poor reception. All other devinesin house have no problem finding and connecing to our network. I can even see the neighbors networks on all devices.
My macbook pro running mavrick can not see any network unless I'm rigth on top of the router.
What can I do.

Start up in Recovery mode. In the OS X Utilities screen, select Get Help Online. A clean copy of Safari will launch. No plugins, such as Flash, will be available. While in Recovery, you'll have no access to your saved bookmarks or passwords, so make a note of those before you begin, if they're needed for the test.
Test. After testing, restart as usual and post the results.

Can we cascade PID and PIV loops to control the servo motor

Similar Messages

Maybe you are looking for