Can we change Audit Database

Is there any way to reconfigure audit database in SAP 4.0 and I m using SQL Server 2008 as my database. i just want to change Audit database in same Sql Server because by mistake i choose different database in ODBC connection.

Yes It is possible.
Go to CMC>Auditing
Under Configuration>ADS Database
Connection Name: Give a new connection name
Type: Microsoft SQL Server
User Name: your SQL server user name and password.
Save the configuration and restart the SIA. It will show such a status as displayed below, if configuration is success.

Similar Messages

  • How can I change the database & schema used by an Application?

    Hi community,
    I am very new on Essbase and I need help to find out how can I change the database connection (and schema) used by the database of an Application. The figure is that I need to point this database to a QA environment (currently it points to DEV).
    If I do a right click over the properties of the database, I can see the following tabs: [ General ][ Dimensions ][ Statistics ][ Modifications ][ Compression ]. However, there is no option to change the database connection.
    Is there a way to do this?
    Thanks in advance for any help! Cheers!

    Are you trying to change a database connection of Planning application?
    Essbase application do not have a relational connection.
    Regards
    Celvin
    http://www.orahyplabs.com

  • How can i change the database name on MaxDB?

    Hello.  I need to do a homogeneous copy where the source system is the productive system and the target system is the quality system. Therefore after to restore the data backup i need to change the database name of quality system (from CLP to CLQ) but i'm not sure that it could be possible because in the MaxDB documentation i didn't found nothing about that. please can you tell me if it is possible and how i change it?
    I work with MaxDB 7.6.04.11.  Thanks for your help.

    > I will try to explain better: the SID of the source database is CLP and the SID of the target database is CLQ, when you say "once you restore the DB, it will use the new SID", i understand that the new SID in the target database would CLP or am i wrong? and i need that the SID in the target database remains CLQ after the restore.
    Hi Ivonne,
    what you've described as your requirement is exactly what will happen, when you just perform the procedure that Eric described to you.
    A recovery won't change the SID of the instance you perform the recovery to.
    All it does is: take the instance as is and load the data pages to the data area. Afterwards the log files may be recovered.
    Think of the instance as a kind of container for your database.
    The instance itself is not the database - so the SID does not change with the content of the database.
    Hmm... why not simply try it?
    Create a little test instance and back it up.
    Create another instance with a different name and recover the backup of the first instance.
    You will still have both instances, each with its original name.
    regards,
    Lars

  • Can i change the database connections through MAXL Scripts?

    Hi,
    just want to know whether i can change the database connections through MAXL Scripts. i am using essbase 9.3.1.

    Hi John,
    I have built my rulefile by connecting to a database & now i want to change the database connections. I know i can change the database connections through frontend. ( File--> open file). I want to know whether i can change the database connections by writing any MAXL Scripts.

  • Can I change the database authentication

    Hi,
    I have created an application with database authentication. Can I change this to use application users authentication? Or can I import pages from aon application to another?
    Thank you

    in your application go to shared components-->Authentication Schemes
    And choose tab "Change Current"
    regards
    jean marc

  • Can I change the database Listener name in 11.5.10.2

    Hi Hussen
    Is it possible to change the Listener name and port on database node. My Application is of 4 node env. 2 rac database nodes 2 shared application tier nodes.
    My requirement is to change the Database node listener name and port.
    Thanks
    reddy

    Reddy,
    It is possible -- Please see (How to change the hostname and/or port of the Database Tier using AutoConfig [ID 338003.1]) for details.
    However, it is always recommended you have the ports on the application/database tier nodes within the same port pool -- See (How To change the Port Pool in the E-Business Suite 11i [ID 414439.1]).
    Thanks,
    Hussein

  • How can I change my database options after it's created ?

    Hi ,
    I'm using a 10 g oracle on a solaris 10 machine .I created a database and now I m willing to change the database option.I tried to use dbca but the Configuration Options checkbox is disabled.Is there any other way to change the database option ??.For instance ading the JVM support ?.
    Cheers.

    You will need to run the installation scripts....as noted in My Oracle Support (support.oracle.com)..
    Note:
    Database Version 10.2.0:
    Note.276554.1 How to Reload the JVM in 10.1.0.X and 10.2.0.X
    and
    Master Note for Oracle JVM [ID 1098505.1]
    Read, learn, Share,
    Regards
    Tim
    Please mark this thread as answered...

  • Change the database log on parameters in the run time with CR10 Delphi2007?

    Hi,
    I'm using crystal report 10 and Crystal VCL for Delphi. How can I change the database log on parameters in the run time?

    You have to use the ConnectBuffer. See [this|https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/oss_notes_boj/sdn_oss_boj_erq/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/scn_bosap/notes.do] note for details.
    Also, consider searching the notes database:
    https://www.sdn.sap.com/irj/scn/advancedsearch?cat=sdn_ossnotes&query=&adv=true
    The search; VCL database crystal, returns a number of notes that may be of use.
    Ludek

  • Change the Database Name in Essbase Studio

    Hi All,
    Happy new year to all of you.
    Is there a way to change the database name in Essbase Studio, what I can see now once we have registered a database in Database Sources panel, we can't change the Database Name because it is always grayed out but the server name, user name and password can be changed.
    Actually I have mentioned this issue to our team before starting development and they proposed me the schema that I can use, but suddenly our client did not agree with it that we have been using, and then our client asked us to use another schema, FYI we are using Oracle Database as the data source.
    Can you guys here share how to manage this situation.
    Thanks,
    Rudy

    For Essbase Studio, the configuration metadata are saved as CP_tablenames, look for the CP tables, and make proper database change for the database name.
    1. Make a Oracle backup for the CP tables before you change the metadata so that you can get back in case if error
    2. Change the CP_CONNECTION TABLE, NAME column
    3. Change the CP_SOURCE table, column DNAME, for example, it is called TBC.Sales, change to NewDB.Sales
    I am not sure if there are other table also need to be updated, anyway, when you update the DBname in the metadata level, everything should be consistent in all of the related tables. Here, I assume the new db has the same table names as the old db, if the new db has very different table names, recreating everything may be easier and has less risk.
    http://hyperionexpert.blogspot.com/
    Bob

  • Can i  use Oracle Database Audit Vault and Oracle Database Firewall on Solaris?

    Can i  use Oracle Database Audit Vault and Oracle Database Firewall on Solaris?

    4195bee8-4db0-4799-a674-18f89aa500cb wrote:
    i dont have access to My Oracle Support can u send text or html of document please?
    Moderator Action:
    No they cannot send you a document that is available only to those with access to MOS.
    That would violate the conditions of having such service contract credentials.
    Asking someone to violate such privileges is a serious offense and could get that other person's organization banned from all support and all their support contracts cancelled.
    Your post is locked.
    Your duplicate post that you placed into the Audit Vault forum space has been removed (it had no responses).
    This thread which you had placed in the Solaris 10 forum space is moved to the Audit Vault forum space.
    That's the proper location for Audit Vault questions.

  • How can I change session properties in Audition after omf import.

    After importing an omf. Everything is imported correctly. But the session properties do not match. I would like to change it back to 24bit. How can I change the session properties such as bit depth, without having to create a new session? There used to be a advanced session properties window.

    When you save the session in Audition, if you use 'Save As' then you'll get options to set the save defaults to whatever you want.

  • Can i change language in audition cs5 or cs6?

    Hi
    can i change language in audition cs5/6 ?
    i installed cs6 with my native language
    but sometime i would like to switch in english to follow the tutorials because they are in english
    i bought a lynda dvd , it's all in english , and it's hard to follow the videos with my copy of audition in another language
    thanks

    You should be able to switch in the preferences.
    From the Library menu on Windows go to Edit >> Preferences (Lightroom >> Preferences on Mac)
    Choose the General tab, and then use the drop down list for language. Select Swedish and then click OK.
    Quit Lightroom.
    Re-start Lightroom.

  • Can SID of R12 database be changed after installation?

    Hi
    We have R12 vision instance running on a server.
    Can SID of its database be changed without change in the data inserted by the development team ie keeping the data & rest all intact?
    Regards
    JIL

    With the help of Rapid Clone, it is possible.
    - Run Pre Clone
    - Stop all services (application and database).
    - Run Post Clone
    Note: 406982.1 - Cloning Oracle Applications Release 12 with Rapid Clone
    https://metalink.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=406982.1

  • How can you change data on a SQL 2012 application database that uses availability groups from BizTalk server?

    If you use the WCF-SQL adapter it is recommend that you set UseAmbientTransaction to true if you are changing data. I think this requires MSDTC to be enabled on the SQL server that you are changing the data on. (http://msdn.microsoft.com/en-us/library/dd787981.aspx)
    I think that Availability groups does not support MSDTC. (http://msdn.microsoft.com/en-us/library/ms366279.aspx).
    How can you change data on a SQL 2012 application database that uses availability groups from BizTalk server?

    Hi,
    Yes, Availability groups doesn't support MSDTC. Please refer to the similar discusison which maybe helpfull:
    http://dba.stackexchange.com/questions/47108/alwayson-ag-dtc-with-failover
    http://stackoverflow.com/questions/17179221/msdtc-in-always-on-availability-groups

  • OEM Can't get to database after changing the port on the database

    Hello OEM Gurus!
    I had to change the port on a database(11g) from 1521 to 1526. I adjusted the listeners to include the SID (finapp1t) in the listener listening on port 1526. I removed the SID from OEM (10g btw) and rediscovered it. It successfully rediscovered.
    Now I receive the following when I attempt to go into "tablespaces" or "tables" on the FINAPP1T database page:
    Listener refused the connection with the following error: ORA-12505, TNS:listener does not currently know of SID given in connect descriptor The Connection descriptor used by the client was: (description=(address=(host=urora2t.unioncentral.com)(protocol=tcp)(port=1521))(connect_data=(sid=finapp1t)(server=dedicated)))
    I then clean started the Agent on the server but I get the same results.
    OEM seems to think that that database FINAPP1T is still using port 1521. I can connect to the database on port 1526 from my Desktop so I know the listener sees this database.
    How do I tell OEM to update the port ?
    Thanks for you help!
    Edited by: sawright on Mar 29, 2012 10:33 AM

    Success
    The connection test was successful.
    =============
    Information from Review Screen:
    Name Value
    Oracle home path /u01/app/oracle/product/11.2.0/dbhome_1
    Monitor Username dbsnmp
    Monitor Password ******
    Role NORMAL
    Listener Machine Name urora2t.unioncentral.com
    Port 1526
    Database SID finapp1t
    Preferred Connect String
    Edited by: sawright on Mar 29, 2012 11:24 AM

Maybe you are looking for

  • I would like to receive faxes on my iPhone, how?

    I see several apps for sending faxes. I tried downloading iFax as it said it could receive faxes, but it instantly said the Apple required me to set up an account. That pretty much sounds bogus. What does Apple have to do with it unless they mean my

  • After opening Firefox, how do I stop every new window I open from having old tabs?

    Whenever I start Firefox, it opens a window with tabs I used from a previous session, which is what I want since I set it on Tools > Options > When Firefox starts. However, whenever I open new windows after I have opened Firefox, it always opens four

  • Pricing Condition and Procedure Challenge

    Hi all So my client wants to separate the sales contract between two clients. The items are service charges not stock items. One BP will pay for the item (net of tax), whilst another BP will pay for the tax element I have thought of using two service

  • Publish to Folder or other User account-what's easier

    The title says it, but what method of splitting up websites into their own domain file is easier in the long run. I'm considering a Mobile Me Family Pack to split up some email accounts, but also, the Family Pack would give me separate iDisks. I coul

  • What Happened to OG.PLL?

    G'day, With Forms 4.5 I would have to attach library og.pll to be able to fire off an embedded graphics chart from forms. There doesn't seem to be an og.pll available with Forms 6. Can anybody tell me what I should do instead to fire up Oracle Graphi