Can we change Basic Cube to Transectional Cube

Dear All,
I have one doubt that is "Can We change Basic Cube to Transectional Cube.
If anybody knows about this.tell me please.
Thanks&Regards
SubbaRao Koyalakuntla

yes u can do ...
Thanks,
Debasish

Similar Messages

Can we change basic infocube to Transactional cube ?

Hi,
Can we change basic infocube to Transactional cube ?
If so, how to do it?
thanks
murali.

Hi dear and welcome on board!
You can do it, sure!
Converting Basic Cube to transactional
Hope it helps!
Bye,
Roberto
...and please don't forget to reward the answers...it's THE way to say thanks here...

How we can load change record in cube.

Hi,
How we can load change record in cube, (delta)
i need step by step in sap BI 7.0.

Hi Nitin
I hope you are asking about delta loads, if your datasource supports deltas then you can do only changed records from source to cube. To see the details goto ROOSOURCE table in ECC and find.
For further help search in SDN and help.sap.com, you can find n number of postiings about the same.
Thanks
Reddy

Can i change the Technical Name of A Cube

Hi friends,
I have created a n Info Cube with the name ZXXTB02 follwed by the creation of Transformation and DTP . But Latter i found that I violated the naming convention,
So can i change the name of my Info cube to Z1XXTB02 or I have to create a new Infocube ...
Regards
Anurag

Hi Anurag,
Unless you can do some modification at the table level, you cannot change the technical name of the cube, so may be better to copy this as a new cube and give the desired technical name.
Hope this helps...

Can i overrite the data in basic cube.???

Hi,
Is it there any way to overrite the basic cube data???is it possible??or can i replace the old values by new values in basic cube.??
What i am doing here , reading the data from the basic cube(cube1) to BPS layouts and modifying the data in layout and saving the modified values into transactionl cube(cubtr1),sending the modified values from transactional cube to basic cube(cube1).in basic cube before modification i have the values 100 and after modification the values is 200,now i want to replace or overrite the data in basic cube (replace or overrite 100 by 200).
If any logic please can you share..
Thanks in Advance.

HI
Basically Basic cube will not allow the Over write functionality. what you do is just maintain the DSO in first layer and then you can load the data from DSO to second layer(cube). this can will solve your problem.
Regards,
Chandra.

Who can create, change or delete cubes?

Hi Gurus,
I am trying to find out who can create, change or delete the cubes at our BW system.
I wanna learn if it possible to report this via SUIM or any other way.
If so can you please tell me about which TCODES or authorization objects should I use.
Thanks in advance!

Hi,
Try these Authorization objects:-
S_RS_ICUBE --> Authorizations for working with InfoCubes and their subobjects
S_RS_ADMWB-->
Authorizations for working with individual objects of the Data Warehousing Workbench. In detail, these are: source system, InfoObject, monitor, application component, InfoArea, Data Warehousing Workbench, settings, metadata, InfoPackage, InfoPackage group, Reporting Agent settings, Reporting Agent package, documents (for metadata, master data, hierarchies, transaction data), document store administration, (Customer) Content system administration, broadcast settings.
Authorizations for working with the BI Accelerator Monitor.
Refer the detailed description of Authorization Objects on the below link:-
https://help.sap.com/saphelp_nw70ehp1/helpdata/en/80/1a6859e07211d2acb80000e829fbfe/content.htm
Hope it helps.
Regards,
Hemlata

Can we change the attribute once the cube is live

Hi:
i was wondering whether can we change the attributes once the cube is live?
kedar

If the Cube is LIVE with data ,we can turn ONN the NAV attribute for the cube as per the post above.
1)Do i need to delete and reload data in the cube for the navigational attribute changed inthe cube??history data
2)Will my deltas be affected which are live and running??
3)will update rules deactivated be a problem when we transport to production??
4)If we make changes to existing data model like adding infoobjects and want to have history data modified to that object ,than Can FULL REPAIR load work ??
or making a copy of the cube ,generating export DS..loading ..the olad traditional way is the option

How to write data from Basic Cube to Transactional Cube

Hi experts,
My problem is the following: I have a Transactional Infocube (IC1) and a basic Infocube (IC2). They have both the same structure. IC2 is loaded with data and other data is keyed in IC1.
I would like to write data from IC2 to IC1 and eliminate data redundancy if there can be some.
Can anyone tell me how I can do that?
Thanks in advance

Hi,
Yes , you have to create a multiplanning area ..
In the planning level , filter the value which you want to copy from basic to transactional cube .
Fields to be changed : Planning area and others as per your need..
Field for condition : if you want to copy data from 2006 then give calyear as field for condition.
Parameter group : give the value 'from' as basic cube 'to' as your transactional cube ..

Query on BCS virtual cube is not using the aggregates on BCS basic cube

Hi all,
I have BCS Virtual cube which is linked to BCS Basic cube. I built aggregates on BCS Basic cube.
I created simple query on BCS basic cube and ran in debug mode of rsrt, it showed the aggregates on bcs basic cube. But when I created the same query on BCS vitual cube and ran it rsrt debug mode the query did not show any aggregates, that was strange.
So My questions is whether query built on virtual bcs can utilize the aggregates built BCS basic cube, if possible please let me knows the tweaks.
Thanks,
Raj.

1. Goto se37. Enter RSDRI_INFOPROV_READ and choose Display.
2. In line 82 (in a BW 3.5) there is a line that says:
CLEAR: e_t_data, e_end_of_data, e_aggregate, e_split_occurred.
Put the cursor in there and press the 'stop shield' or use CtrlShiftF12.
3. In the same mode open transaction RSRT and choose your query. Execute it. If you stop at the breakpoint, enter I_TH_SFC into one of the fields in the lower left area and press Enter. You should see a table with the characteristics you need in the system.
As I said I'm not quite sure if it works. I have access to a BCS system on monday. I'll try then to find out more.
Best regards
Dirk

Why to use a Basic Cube?

Hi All, I have a doubt,
If with a transactional infocube is possible to made the same things (and more) than with a basic cube, why not define always all the infocubes as transactional?
Tks for your apreciation

Hi SSap
Transactional InfoCubes can be filled with data using two different methods: Loading planned data via SEM or via BW Staging, where no planned data can be loaded. You have the option to convert a transactional Info Cube Select Convert Transactional InfoCube using the context menu in your transactional InfoCube in the InfoProvider tree. By default, the Transactional Cube Can Be Planned; Loading of Data Not Permitted is selected. The system then fills the cube using the SEM functions. Switch this setting to Transactional Cube Can Be Loaded With Data; Planning Not Permitted, if you want to fill the cube with data via BW Staging.
Transactional InfoCubes differ from Basic InfoCubes in their ability to support parallel write accesses. Basic InfoCubes are technically optimized for read accesses to the detriment of write accesses.
Use
Transactional InfoCubes are used in connection with the entry of planning data. The data from this kind of InfoCube is accessed transactionally, meaning data is written to the InfoCube (possibly by several users at the same time). Basic InfoCubes are not suitable for this. You should use Basic InfoCubes for read-only access (for example, when reading reference data).
transactional infocubes can be filled with data using two different methods: using the transaction of BW-BPS to enter planning data and using BW staging, whereas planning data then cannot be loaded simultaneously.
Anyway, the data from this kind of infocube is accessed transactionally, meaning data is written to the infocube (possibly by several users at the same time); basic infocubes are not suitable for this. I think this is the only proper use of this type of cube...
Hope your doubt is clear, and it help you
Atul
We have an option to switch the Tranasaction cube such as "Loding allowed and Planning not allowed" and "Planning allowed and loading not allowed".

Converting Basic Cube to transactional

I have a very basic question on converting basic cube to transactional. I have set the transactional flags for entries (OBJVERS A & M) and executed the ABAP report SAP_CONVERT_TO_TRANSACTIONAL. The cube has been set to transactional. Now my problem is I am unable to get the context menu, which can convert the transactional cube back to basic. Any suggestion is eagerly awaited.
regs
D Bret

Hi,
The context menu should have the 'Switch transactional InfoCube ' option if the InfoCube is transactional. This will not allow you to convert the InfoCube back to a basic InfoCube but will allow you to toggle the InfoCube between 'Transactional InfoCube can be loaded with data, planning not allowed' and 'Transactional InfoCube can be planned, loading not allowed'.
These context menu options achieves the same functions as the function modules mentioned in the previous reply.
Kind regards,
Dorothy

How many primary keys can w have in cube, ods objects?

how many primary keys can w have in cube, ods objects?

Hi Naresh,
16 primary keys only possible(for cube: 16 dimensions, ODS - Keyfields)
For ODS:
-         You can create a maximum of 16 key fields (if you have more key fields, you can combine fields using a routine for a key field (concatenate).)
-         You can create a maximum of 749 fields
-         You can use 1962 bytes (minus 44 bytes for the change log)
-         You cannot include key figures as key fields
More info: [Creating ODS Objects|http://help.sap.com/saphelp_nw04/helpdata/EN/4a/e71f39488fee0ce10000000a114084/content.htm]
Hope it Helps
Srini
[Dont forget to close the call by assigning poings.... - Food for Points: Make a Difference through Community Contribution!|https://www.sdn.sap.com/irj/sdn/index?rid=/webcontent/uuid/007928c5-c4ef-2a10-d9a3-8109ae621a82]

Basic cube compression

Hi colleagues:
I have started a basic cube compression. Considering there are lots of delta load requisitions, the entire process will take more than 30 hours.
However I need to run the process chain to load delta in others data providers and also in the same basic cube that has being compressed.
<b>May I run the delta loads in parallel to the compression process?</b>
Best regards
Waldemar

I think Jkyle has probably identified the biggest concern.
This is a good example of why you should break up large processes into smaller pieces - I can't imagine a requirement to compress everything at once on a large InfoCube.
Always process manageable chunks of data whenever possible and benchmark before running larger processes, that way you can minimize:
- impacts to system availability.
- impact to system resources of large jobs.

How to access basic cube data as part of update rule routine?

Dear colleagues:
I am developing a routine as part of the update rule to define a characteristic value to feed an infocube. However, I need to peek up a data that is available on another infoprovider, in this case a basic cube.
So far, I have done that by peeking up data form ODS as part of the update routine, but this is the first time I need to peek up a data from a basic cube.
<b>Does that works the same way as ODS?</b>
Best regards
Waldemar

Hi Krzysztof Konitz:
I have posted an inquire about getting that from the PSA. By mistake I have posted that once before your reply and another after that. Then I red you reply.
However, you replay solved the problem.
Best regards
Waldemar

From where i can downlaod AWM for cubes creation

Hi experts
From where i can download AWM for cube creation.
Thanks in advance
Regards
Frnds

See the "Downloads" portlet on this page: http://www.oracle.com/technology/products/bi/olap/index.html

Can we change Basic Cube to Transectional Cube

Similar Messages

Maybe you are looking for