Can we change movement 601 to Zmovement type during PGI?

Hi all,
Can we change the standard movement type 601 based on some logical condition to Z movement type during PGI?
If any exit is there , please provide.
Thanks for giving input.
Saravanan

Hi lakshmipathy,
Thanks for your answer.
So , can I take that re-determination of movement type during PGI is not possible?
Why I need this requirment?
Account determination in TDP ( IS-OIL ) functionality is based on movement type .
In my case , because of additive addition to the main material , only some times the G/L account determination should change and this can be controled by checking additive flag during PGI and if flag available , then If I can change movement type only to these cases , I can go do new account determination. Other wise I do not want to distrub the present configuration.
If this is not feasible , then I have to think some other way to get it done .
Thanks and regards,
Saravanan

Similar Messages

Can we change font size and font type in reports

Hi All Technical/Functional Masters,
We are developing some transactional reports in ISU. this report has 20 columns to be printed. On screen, display is not a problem but client has a requirement to download this report in PDF format and wants to print on A4-paper in Landscape. Although we have managed to accommodate all the columns on A4 paper but have to compromise with font size that are very small and not visible. If we download the report in excel format we are able to maintain the font size 8 and accommodate all columns after little format but same in PDF is a problem.
Can anyone tell whether we can increase the font size and change font type(from SAP standard to 'Arial') before sending the output in PDF ? Is there any property or utility that can be changed or used for this purpose.

Function Module : CONVERT_ABAPSPOOLJOB_2_PDF
Include : THSTXWFPL
for modify font size
decrease fontsze foncharacter will increase
fontsize = 120. <-- Change
fontsize = 100. or fontsize = 80
Depend on your logon lang. My case logon 'TH' or 2. I modified font ZCORDIA (refer CordiaNEW thai font)
if is_cascading is initial.
case language.
when '0'. "Serbian
 font = 'COURCYR'. devtype = 'SAPWIN'.
when '1'. "simpl.Chinese
 font = 'CNHEI'. devtype = 'CNSAPWIN'. cjklang = 'X'.
when '2'. "Thai
font = 'THDRAFT'. devtype = 'THPDF'.
 font = 'ZCORDIA'. devtype = 'ZMTHSWNU'.
 font = 'THANGSAN'. devtype = 'ZPDFUC'.
when '3'. "Korean
 font = 'KPSAMMUL'. devtype = 'KPSAPWIN'. cjklang = 'X'.
when '4'. "Romanian
 font = 'COURIER'. devtype = 'I2SWIN'.
when '5'. "Slovenian
 font = 'COURIER'. devtype = 'I2SWIN'.
when '6'. "Croatian
 font = 'COURIER'. devtype = 'I2SWIN'.
when '8'. "Ukranian
 font = 'COURCYR'. devtype = 'SAPWIN'.
Add font Cordia Thai
SE73 --> Fon familia --> ZCORDIA
Load Font Cordia thai to system
SE38 --> RSTXPDF2UC
load CORDIA.TTF
SE73 --> printer font --> 'ZMTHSWNU'
Add ZCORDIA font and copy AFM Metric from = 'THDRAFT'. devtype = 'THPDF'.
Modify AFM
example
*----- OLD--
StartFontMetrics 2.0
sapFamily ZCORDIA
sapHeight 000
sapBold false
sapItalic false
StartCharMetrics 0183
WX 0500 ; N space ;
WX 0500 ; N exclam ;
WX 0500 ; N quotedbl ;
WX 0500 ; N numbersign ;
WX 0500 ; N dollar ;
WX 0500 ; N percent ;
WX 0500 ; N ampersand ;
*--NEW--
StartFontMetrics 2.0
sapFamily ZCORDIA
sapHeight 000
sapBold false
sapItalic false
StartCharMetrics 0183
WX 0375 ; N space ;
WX 0375 ; N exclam ;
WX 0375 ; N quotedbl ;
WX 0375 ; N numbersign ;
WX 0375 ; N dollar ;
WX 0375 ; N percent ;
WX 0375 ; N ampersand ;
Result : decrease space between character. Then Your PDF will have BIGGER FONT.
Rdgs,
Suwatchai

I can't change my searchdistrubitor when I type and search in the adress field. How do I do that? Changing my distrubitor in the search field doesnt work for the adressfield.

I can't change my standar searchdistubitor for the adressfield. And it doesn't matter if I change distubitor in the search field to the upper right.

Change the default search engine in '''address/location/awesome''' bar:
you must modify [http://kb.mozillazine.org/Keyword.URL keyword.url] in [http://kb.mozillazine.org/About:config about:config]
type in the address bar''' about:config'''
then press the button''' i'll be careful i promise'''
then type in the bar '''keyword.URL'''
then '''right-click''' on it, select '''modify''', type [http://search.yahoo.com/search?p= YAHOO] (or other...), click '''OK''',
exit firefox and restart-it.
or find other search engine in [http://kb.mozillazine.org/Keyword.URL Keyword.URL ]
see also : [https://support.mozilla.org/en-US/kb/Location%20bar%20search Location bar search]
thank you
Please mark "Solved" the answer that really solve the problem, to help others with a similar problem.

HT1414 where can i change the location of the backup during a software update?

hey
during th software update i got a message that the backup could not be made due to enough free space on my C disk.
is there a option to change this to an other location like my D partition

There are some wireless external hard drives that can be used with the iPad.
The Kingston Wi-Drive, which costs $50 for the 16 Gigabyte, and then $30 more for every 16 gigs more. It works by you turning it on and then accessing the files on it from an app that you download on your iDevice. You can access music, movies, and other stuff. No connections or anything, it works like a WiFi connection, you connect to it from the setting on the iPad under wireless networks.
Then there is the Seagate GoFlex, which some would recommend over the Wi-Drive. But this one costs $199 and had 500 Gigabytes of storage. It works the sameway as the Kingston: no wires, runs over its wireless connection. You can actually fit up to 300 HD movies on it.
Another option:
Expand your iPad's storage capacity with HyperDrive
http://www.macworld.com/article/1153935/hyperdrive.html
On the road with a camera, an iPad, and a Hyperdrive
http://www.macworld.com/article/1160231/ipadhyperdrive.html
Mac - How to Move the iPhone & iPad iTunes Backup folder to an External Hard Drive
http://osxdaily.com/2011/03/05/how-to-move-the-iphoneipad-itunes-backup-folder-t o-an-external-hard-drive/
Windows - Change iPad default backup location
http://apple-ipad-tablet-help.blogspot.com/2010/07/change-ipad-default-backup-lo cation.html
Windows - Changing IPhone and iPad backup location
http://goodstuff2share.wordpress.com/2011/05/22/changing-iphone-and-ipad-backup- location/
 Cheers, Tom

Can't change Movie Properties

I just bought and downloaded 5 Pixar short subject movies.
I have a 3 year old grandson that I've set up a Mac for.
I've put his favorite movies and trailers on the desktop with large icons and slow double click. I set each movie to open in full screen and close when finished because he can't click on the red close button.
The Pixar movies downloaded into iTunes, so it would be difficult for him to find them to play.
I opened the mp4 in Quicktime and saved as self-contained movie, thinking this would do it. I put the movie on the desktop and opened it to get movie properties. I could not change them, so I can't set to go full screen or to close the movie when done. ???
Is there no way to do this? "Protected" is one thing... but not being able to change the properties seems ridiculous.
RM

Better to use "reference" instead of "self contained" to save on HD space.
Then unplug the mouse and teach the 3 year old the keyboard.
The "Tab" key will highlight a file and a new tap on it will move the focus to a new item.
Command key and the letter o key will launch QuickTime Player.
Command key and the letter f will send the file to Full Screen (requires Pro).
The Spacebar will start and stop playback. Up/down arrow keys will adjust volume.
Command key and the letter w key will close the window. Escape key will send it out of full screen but leave the window open.
Command key and the Tab key will allow switching between the Finder and QuickTime (focus changes each time the Tab key is clicked) and releasing the Command key will make that app the "front".

Config for mov 601 and 101 simultaneously while PGI with sales GL entry

Hi,
Is there any possibility to STO and post 601 and 101 movement posting separate document.
where below accounting entry will be generated ..
Plant-X on 601 mvt
COGS Dr
WIP Inventory Cr
Inter plant Dr
Sales Cr
Plant-Y on 101 mvt
RM Inventory Dr
Interplant Cr
Pls suggest

Hi,
Customer wants to hit sales GL in this case which is not possible ..
Is there any other way around ,, i tried to full fill the requirement by making changes in movement type assigned in schedule line category from 641 to 601 and 647 to 101 so that from one plant it could be sold and in one plant material will be received by movement 101 ..
But SAP is not allowing the same..
Pls guide is there any other way around..

HOW CAN WE CHANGE THE LOCATION OF TEMPORARY FILES DURING BROWSING?

IN ORDER TO WATCH VIDEOS A LARGE AMOUNT OF MEMORY IS REQUIRED. BUT THE DRIVE IN WHICH FIREFOX IS INSTALLED HAS MORE NUMBER OF PROGRAM FILES. IS THERE ANY WAY TO CHANGE THE LOCATION OF THE TEMPORARY FILES THAT GET ACCUMULATED DURING BROWSING?

You probably need to change the value of the %temp% and %tmp% environment variables in:
Control Panel > System > Advanced > Environment variables
You can set the location of the Firefox cache by setting a pref to that location. 
See http://kb.mozillazine.org/browser.cache.disk.parent_directory
To open the about:config page, type about:config in the location (address) bar and press the "Enter" key, just like you type the url of a website to open a website. 
If you see a warning then you can confirm that you want to access that page.

Subcon PO: Can system change the qty proposed for backflush during GR?

Scenario:
We have a Subassy A (qty=1) which requires Component A (qty =8). We have component scrap maintained as 25% in the BOM.
When we create the PO with qty as shown below, the following qty is proposed for the component A (80*1.25 = 100) due to component scrap.
Subcontract PO with item cat L - Subassy A : qty = 10
Component proposed is - Component A : 100
During GR we (101) the Subaasy A: qty = 10
We backflush (543) the Component A qty =80 (system proposes qty =100 but we change it to 80.00)
In subsquent adjustment, MB04 we consume/backflush (543) the additional issued components.
Problem:
IS it possible to have the system propose the component A qty as per the BOM ie (80 for 10 Subassy A parts)
so that inventory control does not have to change the proposed qty during GR.
Thank you in advance.

Hi,
You should try this.
Create an entry sheet in which planned services are defaulted from the purchase order. You can determine the quantities suggested from the PO by specifying percentages (Entry sheet -> Create -> With planned services).
Cheers !

Can i change the temporary tablespace for schemas during the transactions??

In My Prod database some of the tablespaces assigned system as Temporary tablespace. I want to change the temporary tablespace for these schemas and the default temporary tablespace of the database.
Can I make this change while the users are accessing the database. Is there any impact If i make this change while the transactions are running.
Below is the change i want to do........
1. Change the users for SYSTEM to TEMP in the temporary tablespace by executing the following SQL
statements:
alter user SYSTEM temporary tablespace TEMP;
alter user SYS temporary tablespace TEMP;
alter user AD_MONITOR temporary tablespace TEMP;
alter use SI_INFORMTN_SCHEMA temporary tablespace TEMP;
alter user EM_MONITOR temporary tablespace TEMP;
alter user ORDPLUGINS temporary tablespace TEMP;
alter user TSMSYS temporary tablespace TEMP;
alter user XDB temporary tablespace TEMP;
alter user SCOTT temporary tablespace TEMP;
alter user DBSNMP temporary tablespace TEMP;
alter user DIP temporary tablespace TEMP;
alter user OUTLN temporary tablespace TEMP;
alter user ANONYMOUS temporary tablespace TEMP;
alter user ORDSYS temporary tablespace TEMP;
alter user MDDATA temporary tablespace TEMP;
2. Set the default temporary tablespace to TEMP by executing the following SQL statement:
alter DATABASE default temporary tablespace TEMP;

user11829256 wrote:
But if one transaction is using the old temporary tablespace and if i change the temporary tablespace of user will that transactions of that user fails which is using the old temp segment....It will continue to use the old one till the end of transaction.
Here a quick test (hopefully readable) :
-- session 1 as a dba user
SQL> grant create session to nga identified by nga;
Grant succeeded.
SQL> alter user nga temporary tablespace tmp;
User altered.
SQL> select temporary_tablespace from dba_users where username='NGA';
TEMPORARY_TABLESPACE
TMP
-- session 2 as NGA
SQL> insert into gtt
2 select * from (select * from all_objects union all select * from all_objects union all select * from all_objects);
80559 rows created.
-- session 1 as a dba user
SQL> select tablespace from v$tempseg_usage where username='NGA';
TABLESPACE
TMP
SQL> alter user nga temporary tablespace pstemp;
User altered.
SQL> select tablespace from v$tempseg_usage where username='NGA';
TABLESPACE
TMP
SQL> select temporary_tablespace from dba_users where username='NGA';
TEMPORARY_TABLESPACE
PSTEMP
-- session 2 as NGA
80559 rows created.
SQL> roll;
Rollback complete.
-- session 1 as a dba user
SQL> select tablespace from v$tempseg_usage where username='NGA';
no rows selected
-- session 2 as NGA
SQL> insert into gtt
2 select * from (select * from all_objects union all select * from all_objects union all select * from all_objects);
80559 rows created.
-- session 1 as a dba user
SQL> select tablespace from v$tempseg_usage where username='NGA';
TABLESPACE
PSTEMPNicolas.

Change the description of condition type

Hi,
How can i change the description of condition type??
Regards,
Kalpesh

H iMichael Gerard Leo
Thanks.
But it takes only 20 characters in descrption of condition type, while i want to write 30 character. What should be done?
Kalpesh

How to change Major/Minor bluetooth device type?

I have a fleet of 8540w that will be used in a medical field service application. The field devices are bluetooth devices and will only pair with a device that has a Bluetooth major type of Medical Equipment. How can I change the bluetooth major device type that is reported by the notebook to the field devices?

I would have thought so, too. However, the mouse showed up with the name on a new MBP that it had not been paired with before. So, either the mouse remembers it's name, or there is some sort of sync of Bluetooth device information via Apple ID or the like. Otherwise, the MBP could not have know the name that it was given on the iMac...

Why can't I change movie file type

Hey all,
I'm running iTunes12 on PC, and I have some mp4 movies I would like to put in the library! I added the file to the library and it goes straight to home videos, which is fine as I'm used to just right clicking and clicking on get info and changing that to "movie" so it adds to my movies library. Only problem is that now, all the information that I used to be able to change is greyed out and I can't change it or anything... not even the name. I really would like to find out what's causing this! I already checked the file and it's not read-only. HELP

Thanks for your reply.
I'm trying to print from organizer. It was all working fine with Elements 8 on my Dell but now I have a new HP and Elements 11. Tried Printer Preferences but it still didn't work. Ugh!
[email protected]

Goods receipt Changing Movement Type.

Dear Experts
Can we change the Goods Receipt movement type(101) in the case of Deleivery of Production order By MB31.
Bcoz we r having the Same Movement type for Goods Receipt From Out side (Vendor). And From this year we want to change the movement type Sotaht we can track out the receipt of Material Through Productiopn And Also Separte From the vendor.
Rgds
Pankaj Agarwal

1. It is not requried to create a new movment type for the case of segregating the 101 mvt type..
2. Each movement type along with it -also has a Transaction event type- which help us to identify the transaction event
this should be useful to identify the same..
so better dont create new movement type..try the transaction event type..
reg
Dsk

Ios 7.4 nightmares. When idle and charging my screens move on their own, types jibberish on its own and sends the jibberish as a text message to random callers, changes sounds on its own. And that's not all!!!

The ios7.04 download for my iphone 4s has tuned the phone into a nightmare. Battery charging time is 3x what it used to be, battery drains after 4 hours whether I talking or phone is idle. I can no longer hear the phone when it rings. Here is the dealbreaker:When idle, untouched and charging the screens move on their own, type jibberish on their own and send the jibberish via text to a random selection of my contacts. The phone is charging now and I am watching the screen move to the alarm stopwatch screen. It From there is has moved to the Sounds screen and has changed my ring tone twice. (It plays the tones as well.). My hands are not on the phone at the time and the homescreen is visible when charging begins. I have turned off so many components of the phone that there is simply no longer any reason to walk around with what has become a functionless burden. The most obvious solution is to say goodbye to Apple and go back to the brand I was using before. Thought I's give this forum one last shot. For the life of me I can not understand why so many of us have so many complaints about our devices yet no one takes the path of least resistance...which is to simply switch to a brand that is reliable. I never had any problems with a cell phone until I switched to Apple.

Thank you. I called my carrier and told them that the i704 os made my phone unusable and that the support in the forums is populated by children like yourself who make nasty comments and provide no support, I was released from my contract. Free at last from rotten Apple and shmucks like you.

Can we define MOVEMENT TYPE

hi,
SAP Gurus,
i want to know can we define or copy MOVEMENT type
with our own reason.....for e.g 561 to Copy my own movement typelike 701 reason very poor quality.....
please if there any solution please let me know......
thanks in advance....
Helpful ans will be rewarded......
ragards....
Sunil Rathod......

Dear Sunil,
Steps To Create New Movement Types in SAP:
How to create movement types? What are the steps involved? When will you recommend a new movement type?
Companies may request a new movement type to differentiate between the inventory posting transaction. For example, 551 scrap movement type. Some company may request to have it as 551 for Internal Scrap and Z51 for External Scrap.
Copy, Change Movement Types
4.6x
Assuming I want to create another movement type Z01.
Transaction OMJJ
Select the standard movement type 201
Click copy, then overwrite the 201 with Z01
Click the Enter button, then click Copy all
Select the new movement type Z01
On the left hand column screen, click Reversal/follow-on movement
Fill in the reversal movement type
For the rest of the options, you can leave it alone or change it depending on your requirement
Check this link also:
http://help.sap.com/saphelp_40b/helpdata/ru/fc/6cec6eb435d1118b3f0060b03ca329/content.htm
Do let me know in case of any queries.
Hope this helps you.
Do award points if you found them useful.
Regards,
Rakesh

Can we change movement 601 to Zmovement type during PGI?

Similar Messages

Maybe you are looking for