Can we change or restrict response msg in PI

Hi Experts,
our interface is IDOC-PI-PROXY this interface is standard interface from ECC side also.we are getting response from the proxy automatically to PI with error merssage,because we have not configrued RD,ID,RA in confiration.
all the time when message is processed we are getting error message.we cannot change in ECC side and in pi we have option in reciver detmination,but to use we need authorizations from client.in basis point can we restrict that response in PI.
is there any procees  can we change in PI?
thanks
nag

What is the QoS at sender side. It should be async. Then still if you receive response, follow the blog that Bhaskar pointed.
Regards,
Prateek Raj Srivastava

Similar Messages

  • How can i change the restrictions pass code

    How can i change the restrictions pass code

    Disable restrictions, then re-enable such. You'll be prompted for a new passcode.

  • Can you change Siri's responses?

    Can you change Siri's responses?  Say you want her to say "Carrie is gorgeous", can you do that?

    I'm affraid you can't. You could send yourself a message saying that, and ask Siri to read out the last message

  • How can I change a restrictions passcode without losing all the restricted settings?

    We have two iPads for two boys... both are heavily restricted.  One of my boys saw the passcode and I changed it by disabling and then re-enabling restrictions, only to be shocked when ALL MY SETTINGS were reverted to default and DIDNT come back after enabling restrictions again.  How can I change the passcode on the other iPad without losing all the settings, especially the long list of blocked websites?
    Thanks in advance.

    What good would the passcode be if you could bypass it like that?

  • Can't change a Restricted Key Figure technical name in QD BEx 7.1.0

    A few days ago I created a new Restricted Key Figure in Query Designer and it was autopopulated with a default technical name.  So I immediately changed it to 'ZRNPVORDINTFACTPPP_FY'.
    Now, today, I realized that the 'F' in the technical name is a typographical error and I need to remove it.  I clicked the Restricted Key Figure on the left from within the list and clicked the Change/Display pencil icon in the properties window, but the Technical Name field is still greyed out.  Also tried right clicking and selecting Edit, but same problem.
    Would removing all instances of where the figure is used in the query and other queries allow me to change it?  Could it be a user rights issue?
    As always, thanks for the help!

    Hi,
    After creating a RKF , you cannot change its technical name.
    If the RKF has a lot of restrictions and creation of another similar RKF is a big process ,
    you can create a copy of the same through transaction RSZC.
    In RSZC , give the source and target cube name as the name of the multiprovider on which your query is built,
    select restricted keyfigure ,click on execute ,  in the list which comes after execute find your KF 'ZRNPVORDINTFACTPPP_FY'
    and click on transfer/copy option available.Change the technical name as you want and then click on execute. A similar keyfigure with the desired technical name will be created in query designer ,global keyfigures .
    Replace the same with your Old keyfigure in report.

  • HT1688 How can i change my restriction password? I forgot

    I dont remember my restrictions passcode

    You cannot reset the passcode for restrictions. You will need to restore the device as new, not from a backup. The restrictions passcode is included in the backup. See this support document http://support.apple.com/kb/HT4946

  • How can I change the default Google search engine in Firefox 8 from google.fr to google.co.uk? Yes, I live in France with a French ISP, but English is my mother tongue and I want UK based responses.

    How can I change the default Google search engine in Firefox 8 from google.fr to google.co.uk? Yes, I live in France with a French ISP, but English is my mother tongue and I want UK based responses.
    I'm using XP Pro.

    You can find search engines on the Mycroft Project website.
    * http://mycroft.mozdev.org/
    * http://mycroft.mozdev.org/google-search-plugins.html

  • I put parental controls on my sons computer and now he is unable to get onto many needed sites.  I would like to change the restrictions but unfortunately I can not remember my passwords.  How can I find my passwords?

    I put parental controls on my sons mac book air and now he is unable to get onto many needed sites.  I would like to change the restrictions but unfortunately I can not remember my passwords.  How can I find my passwords?

    That is stealing. Your friend has no right/licence to give the songs to you. It violates copyright law.

  • I have restrictions on my configurations where can i change it ???

    I have restrictions on my configurations where can i change it ???

    Hi ketori86,
    I apologize, I'm a bit unclear on the exact nature of your question. If you are looking for more information about Restrictions or Parental Controls, you may find the following article helpful:
    iOS: Understanding Restrictions (parental controls) - Apple Support
    Regards,
    - Brenden

  • Can't change restriction settings?

    My camera, photo booth and FaceTime icons have disappeared, and when I go into the restrictions, it won't let me change the restriction on the camera and FaceTime?

    Try a reset. Press & hold the Power and Home buttons together for 10+ seconds, ignoring the red power-off slider, until you see the Apple logo. If that is not successful, then you may need to restore your iPad to the factory setting.

  • Can not change data in Input Ready Query

    All,
    I have created an input ready query on an aggreagation level which has one transactional cube underlying it however, after run the query I am unable to change data in the cells even though I get a warning message saying query is ready for input
    Note:
    1. The underlying realtime cube is in "Planning Mode:Loading not allowed" state in rsa1
    2. I tried including all characteristics so that the record can be uniquely identified at that aggregation level).
    3. I am not using any characteristic restrictions
    4. I have not set any data slices
    5. I have set the property for Planning "Start query in Change Mode"
    6. I have set the 'Key Figure' Planning Properties to "Can be changed Manually or via Planning Functions" for the key figures
    7. I do not have currency/unit in row/column.
    8. There are any locks occurring
    Any pointers welcome.
    Thanks,
    Milind

    Hi Milind,
    Was wondering how was your problem solved. I get the same message when I run the query in web from query designer and in bex analyzer the cells are not updated with the changes that I make.
    I am hitting my head against the wall to figure what could be the problem as my plan query is simply based on aggregation level created directlty upon the real time info cube.
    Have cross checked all the points that you mentioned in this post but I cells do not change.
    There should be some way around to solve this problem.
    Thanks

  • In Mail can I change my "To" field to From or sender

    In Mail my inbox shows 3 fields "To, Subject, Date Recieved" Can I change the "to" field to from or sender. I know who the mail is to, it's always to me after all it's my mail I'm checking. I would like to know the sender so I can better decide which mail to open and read. Sometimes I'm looking for a response from a paticular person.

    Hi Ubettergetit: Actually it is quite easy to get rid of that little annoyance. With mail open, Right (Control) Click on one one of the headings in Mail. (To, From, Subject....). This will bring up a menu that allows you to select which headings you would like to see, change it as required.
    Enjoy
    Stedman

  • My iPhone 4S appears to be using an old Apple ID.  How can I change this to my current one?

    My iPhone 4S appears to be using an old Apple ID and keeps asking for my sign in.  How can I change this to my current ID -this applied to iCloud only.

    Thanks for the response -
    Unfortunately - I can not use my Old Apple ID at all - Apple/Itunes is not recognizing it at all.  I thought about your last suggestion and the system is not accepting the old ID and password.  I believe this is because the old id (email address) is associated to a service (Verizon) that I no long have.  When I discontinued service with Verizon, their email address that I used as my Old apple ID become invalid.
    I am sure this scenario happens frequently - hopefully Apple can find a better solution in the future.
    Thanks,
        dr

  • How can I change the date of birth on my child's Apple ID?

    HI,
    My son's school have started an initiative where they use iPads as part of their lessons, and subsequently my son has a brand new iPad through the scheme.
    The setup guide that the school supplied directed us to enter the parent's date of birth and the student's name to set up an Apple ID.  However, since setting his iPad up we have become aware of Family Sharing when we setup our old iPad for his younger brother, and the ability to create an Apple ID for a child.  We would obviously like the same level of protection and security for both children, not to mention restricting any accidental purchases!
    Is there any way to change his date of birth from mine to his?  I have read other similar posts with the best solutions apparently to fudge the date of birth so that the child is older than 13 years old.  I would like to do this properly rather than lie about his age...
    Thanks in advance

    You can not change the date of birth on the account. You are explicitly told this when the account is created.
    The ID you created is yours, not your son's. If your son is under 13, then to claim it is your son's ID is to say that you committed a crime when you created it. Create a new account for your son.
    Inform the school that if they are instructing parents to do this because the children are under 13, they are potentially criminally liable. They should know better.

  • How can I change my email adress on Synch?

    How can I change my E-Mail adress on Firefox Synch, because I have lost my controll over this mailadress and need to change it. Could you please tell me how I can do?
    Thanks
    Werner

    This apparently is a problem with the system. The question has been hanging out there for 3 years with no response.
    I changed my Apple ID account email address, and the store and iBooks and such are working great, but I cannot seem to get iCloud to work. Every day a message pops up on my Macbook to sync with iCloud, but has the original email address, and no matter what I attempt it will not change it without warning me that it will delete everything (Notes, Contacts, whatever) from the cloud and my Macbook if I do that. This warning is not apperaing on my iPod or iPad, so it is strange, and they are both seeming to back up to the cloud (or at least iTunes *says* they are).
    I did make backups of the data to stand-alone archives, and I have an iPod and iPad I could take offline to keep the data preserved, but this is irritating.
    I have not contacted Apple yet, as I don't have time to sit on a phone call, and they don't seem to take emails anymore.

Maybe you are looking for