Can we change the cost element after posted some expenditures.

Hi friends,
My client ran the depreciation upto jan 2009, afterthat we found the depreciation GL's are not set the cost element.
so the Depreciation values were not posted cost center wise, now we want to change the GL's cost element , is it possible, if it is possible what is the steps.
with regds
muthuraj.g

Yes,
You can create cost element and interface depreciation posting to CO. For missed Depreciation, manual posting in CO can help to reconcile with FI.

Similar Messages

  • Want to change the cost element for a activity type (KP26)

    Hi,
    I want to change the Allocation cost element for an activity type in KP26. I have already changed the cost element in the activity master data in KL02. Now i want to change it in KP26. I am trying to delete the existing line item in KP26  to create the new line item with the new cost element, but system not allowing to delete the existing one. It throws the error message ""Allocations with XXXXXXX/XXXX (Cost center/Activity type)  exist ; deletion not possible". Can someone please help me to change the cost element?
    Regards
    Dev

    Hi Rao and Lalit,
    Thanx for you people for helping me. i havin gone doubt here. If i am deleting the existing line in KP26 and create new line with appropriage cost element will it be cause the existing datas? I don't want to go for another activity type, because our process is a complex process exist all over the world in more than 300 company codes. So i want to use the existing activity type but want to change the allocation cost element alone. Is there any possibility to change the cost element alone?
    Regards,
    Dev

  • Can we change the alternative COA after transaction data posting

    Hi Friends,
    My client has wrongly updated the GL account in alternative Chart of accounts column in Company code segment. They didnt realise and they posted some transaction data as well.
    Today they realised and tried to change the alternative COA and it showed an error message "GL account balance is not zerowised". They tried to clear the GL account balance, but couldnt solve the issue.
    Please let me know is there any other way to change the alternative COA after entering the transaction data.
    Thanks,
    Dwarak

    thnks

  • Can't change the master page after upgrading to SharePoint 2013.

    After upgrading our farm to SharePoint 2013 we are having trouble changing the master page for sites that don't have sub-sites. We are still using the v4 UI version, and that appears to be what is causing the problem. The error we get when going to /_layouts/ChangeSiteMasterPage.aspx
    is:
    System.NullReferenceException: Object reference not set to an instance of an object.    at Microsoft.SharePoint.Publishing.Internal.CodeBehind.AreaChromeSettingsPage.OnLoad(EventArgs e)     at System.Web.UI.Control.LoadRecursive()    
    at System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint)
    I took a peek at the source code for AreaChromeSettingsPage.OnLoad and found that it references a CheckBox control that does not exist in the v4 ChangeSiteMasterPage.aspx:
    protected override void OnLoad(EventArgs e)
    base.OnLoad(e);
    this.EnsureChildControls();
    if (!this.Page.IsPostBack)
    this.LoadValues();
    if (base.Web.Webs.Count == 0)
    this.resetSystemMasterPageSubSitesCheckBox.Visible = false;
    this.resetSubSitesCheckBox.Visible = false;
    this.resetAlternateCssSubSitesCheckBox.Visible = false;
    this.resetThemeSubSitesCheckBox.Visible = false;
    base.ConfigureCancelButton(this.BtnCancel);
    If I manually add a checkbox control with the ID "resetThemeSubSitesCheckBox" to a hidden panel in the v4 copy of ChangeSiteMasterPage.aspx the page works, but obviously this is not a best practice. How can we fix this without upgrading the UI version, which
    we are not yet ready to do?

    Thanks Mike - Could you please share what is your next step then? I also have custom master pages and layout but I am going to make new master page and layout in 2013 as we need to change the existing branding too. so, i upgrade the site collection. I understand
    the Look and Feel will not persist after the upgrade but I am concern that at least the page should show the content on the page after the upgrade. The page had Calendar webppart on it but after the upgrade it is coming blank.
    any suggestion?
    Regards,
    Khushi
    Khushi

  • How can i change the ROOT ELEMENT name in my ADOBE Form

    Hello All,
    I need to change "data" the Root Element default name to another name.
    Is this possible? How do i do this?
    Thank you all in advance,
    Eran

    Hello Chintan and Otto,
    thank you for your replies...
    Chintan: There is Adobe livecycle designer CE and its a stand alone application :[ designer CE2|http://www.adobe.com/products/livecycle/]
    Otto: I know i can send the xml back and change it in my abap program but i'm talking about stand alone form in a computer with no sap on it.
    The user will fill it and submit it ...
    Thank you all in advance,
    Eran

  • How can I change the language of after effect or creative cloud  for a while .. ( I have bought  a template which expressions are in english  )

    hello, I think that this problem has to resolved if it's not yet..  I am on creative cloud in french and all my APPS are in french 
    I  have bought a template for after effect on video hive and its expressions do not work because they are in english..
    what can I do ? ,
    except changing the language and if it's the only solution How can I do that ?  just for a week .. I don't want to keep an english version
    thanks
    JC

    running After Effects in English, even if you’ve installed and activated it in another language

  • HT2397 can i change the regional code after it has misstakenly been changed to a permanent ?

    i cant change my regional (DVD) code after i misstakenly have changed the code !!!!    can someone please help me ?

    After five changes the player is locked on the last one.  You would have to replace the drive with another one.
    Ciao.

  • Can I reinstall the ps element after uninstallation?

    I bought the ps element 13 recently and installed it on my computer. Today I uninstalled it and want to reinstall it again but failed to activate the installation after inputting the serial no. How can i solve it?

    Hi liangliang11,
    Did you get any error message while installing the software.
    Some links:
    http://helpx.adobe.com/x-productkb/policy-pricing/activation-deactivation-products.html
    http://helpx.adobe.com/x-productkb/policy-pricing/activation-network-issues.html
    Regards,
    Nikhil Gupta.

  • How can I change the default message after System Call Handler transfer error?

    Hi,
    I'm using Unity Connection 9.1 and System Call Handlers to allow to join internal extensions (not reachable from the PSTN).
    I succeeded but I would like to change the default message played when the extension dialed is not known. I tried with Error greetings but nothing changed.
    Thanks for your help.
    Regards,
    Julien

    Just tried this on my 9.1 and 10.0(1) servers and it worked fine.
    I went to the opening greeting call handler, selected the "error" greeting, set the greeting to play my personal greeting (it defaults to the system generated greeting), recording "hey, you dialed the wrong number" and then called in and during the opening greeting I dialed "88" - I heard "hey, you dialed the wrong number" and then it repeated the opening greeting recording as it should.
    the default action after playing your custom greeting in this case is to "restart greeting" - which is why the opening greeting plays again.
    Not sure what you did in your testing with the error greeting - check to make sure you have it set to play your personal greeting instead of the default system greeting - since you can't disable the error greeting there's not a lot of other items I can think of to check.

  • Implication of changing the Cost center during posting

    Hi all,
    Due to business reasons, we have unchecked the 'Agree' indicator in the Acct assignment configuration for Asset accounting.   Hence, cost center becomes editable during document posting.
    We want the cost center to be editable only for ABF1 t-code and for other asset t-codes like acquistion, retirement, scrapping, transfer etc, we want to derieve the cost center from the master data.
    Given the situation, I request experts' input on 2 questions -
    1.  Is it possible to have the cost center editable only in ABF1 and disabled in other AA transactions?
    2.  If cost center is editable in all the t-codes, what is the implication if the cost center is mismatched with the data available in the master record?
    Please provide your inputs.
    Thanks in advance.
    Regards,
    Sridevi

    Hi,
    The client has many plants, of which only few are running in SAP and the rest non-SAP.
    Whenever there is transfer of asset from non-sap plant to SAP implemented plants, we handle the situation as below in the receiver plant-
    1. Treat the asset transfer as legacy asset transfer and create asset master record through AS91.  Maintain the cummulative acq value and Cummu depn value till the last period in master data.
    2. As legacy transfer is not real time integrated with FI, we are doing ABF1 posting to pass manual JV to record APC and Acc depn. posting.  At this instance, we want the cost center to be manually keyed in.  This is because, we have yet another situation, where we need to have the net book value of the asset at cost center level for our allocation cycles.  Hence,
    3. But, for other normal AA transactions, it shd automatically derieve from asset master.
    Request your suggestion on achieving the above requirement.
    Regards,
    Sridevi

  • How can I change the login screen to post results to a local server?

    I am using Captivate 5 and posting quiz results to a local server.
    When students complete modules and then login to post quiz results, they see a login dialog box that instructs them to:
    Enter Your Name:
    Your Email ID:
    Unfortunately, these are not the items I want reported to me. I have them enter an alternative ID in each field. Although I warn them to enter what I need rather than what the dialog box requests, inevitably some fail to do so.
    Is there a way to alter what is displayed in this dialog box? I'm aware that some rdl files have default messages, but I do not know what file might control these messages.

    As I thought, nobody is able to help me ><.
    I found some new things like the CPGURU widget which seems to do exactly what I want for 50$ :
    Quiz Data Extension Widget
    Michael, the developper, figured out how to send the whole data avoiding the post results popup. I'd like to buy this but my superior doesn't agree.
    I also tried to find by myself by decompiling(not sure of the word) the captivate published SWF:
    Quiz data is send by a class named InternalServer extending a TrackingAdapter class.
    Post results popup seems to be an instance of the "InputDialog" class.
    If I can find the place where this AS3 script is generated I think I can modify it to match my needs.
    I'll be happy to share the solution for free if I success.
    Any clue ?

  • How can i change the ipods name after its been named?

    I need to know how to change the name of the ipod when its plugged into itunes and pops up saying the name of the ipod that the former owner named it as.

    Click on the Device tab that appears in the Left side column of iTunes, Select the Device... Double Click on the Name and Rename it.

  • Why can I change the callout text font in some documents and not others?

    By experimenting I have determined that some documents that will allow me to add callouts also let me change the text font to a different font or font size.  Other documents that will let me add callouts will not allow me to change the text font. A specific example is that I can add callouts and change the callout's font in pdf's I create by printing from Word, but a datasheet I have from a manufacturer I use will allow me to add callouts but not change the callout font.  Why can't I change the font in callouts I add to the datasheet?  I am using Acrobat 9.5.2.  Thanks for the help.

    Thanks Bob, I didn't think of that, I suppose that would work.  Basically I would just like to have more text sizes to choose from in the drop down menu, I guess its more an issue of laziness on my part than anything else.  I could make a character style for it, but then I'd probably have 10 different character styles just to change the size of my text when it would be less hassle just to type in the size I need.  I was just looking for a quick fix default option that I was used to having at my old job.

  • In CATS Can We Change the Records For After Approval?

    Hi To all,
       Emp record his timings in CAT2 and the approval has given by related Mgr.After that he dont want that record .Can we make it empty that one.Is it possiable?

    Hi Sekhar Uma,
    Go to T-Code CAC1 and remove the check mark from No change after approval Tab.
    This way your entered time will not become gray and you will be able to change.
    I hope this helps.
    Let me know.
    Arti

  • How to change the Validility period of the cost element

    Hi All,
    how to change the validity period of the cost element. In tranc code Ka02 only the text is allowed to change but i want to change the validity period of the cost element.
    best Regards
    stephen

    Hi All,
    Thanks for your response...........
    My  concern is, i have a document posted to 43100 GL Expense acct, which is also defined as cost element, GL field status G004(cost accts). But when the original document is posted no is no assignment of any cost object.
    But i have to reverse the document and when i use FB08, the reversal is popping up with error " Assignment of CO object is neccesaary " Assign the cost center.
    Is there any way we can update the cost center for posted docuemnt? if so how? and can i make the cost element invalid for previous month so that it will not ask for cost object and change the field status of the GL from g004 to G001 only for reversal and set it back after posting is done.
    Appreciate ur feedback and suitab;le points are rewarded with points.
    best

Maybe you are looking for