Can we combine the authorizations for same value?

Hi All,
We are working on CRM-BW reports.
We have three kind of service providers for one transaction. These are
1. Created by service provider
2. Changed by service provider
3. Responsible service provider.
For all transactions we do have values for all three service providers.
Say one service provider value is 1000. That particular service provider manager want to see all of the transactions if <b>any one of these three service providers</b> has the value 1000.
Please let me know if you need more explanation.
Thanks in advance.
Arun Thangaraj

Thanks Bulut for your reply,
But by going through View creation involves ABAP help, that I dont want.
However, is it poosible to use View while creating the reports in Report Painter? I am not sure.
I want to know whether can we create a table which is used for report painter, so that I can use for creating the Library and then the reports.
I hope you understand my point.
Regards
Kami

Similar Messages

How can i check the authorizations for a query in sap bw 3.1c

Hi,
While running one query i am getting warning message is : you do not have authorization to read object ZVERSION and few column results also not displaying.
I would like to check is there any authorization check for this query and could you explain how we use the authorizations in our BW.
Thanks in advance....

if you execute su53, the authorization check failed cannot be displayed for reports. because you are executing query in BEx is it?
for this you can trace the userid that executing query to check the authorization check failed. Go to st01 and find out the authorization check failed there.
And you can find in RSRT too. i am not sure that.
One more option is there to check the authorization with help of matrix that you prepared for assigning access/authorization to the users.
Hope this would help you.

How can I combine multiple listings for same genre on iTunes 11?

When I downloaded the newest iTunes version 11, I suddenly had multiple listings for the same genre. I literally have 63 genre listings for "Trance"; 4 listings for "Hip-Hop/Rap" and a few others. There was obviously not a problem with the old iTunes version as they were all grouped together. I do get music from several sources but I have no idea how to combine all my "Trance" listings into one. It takes longer to scroll through the "Trance" genres than the rest of my genres combined. I tried to individually change one the "Hip-Hop/Rap" listings by using the "Get Info" tab and typing in the genre until iTunes can autofill the rest but the problem remains. Any ideas how to combine all these into one genre without compromising the genre name? Thanks
Mac OS X Version 10.6.8 Snow Leopard

I believe the closest you can come is look at your songs in Songs. There you can sort by albums.
The album view does not contain a list view any longer.

HT204053 Dear Support Team, every time i tried to logon Icloud its gives me wrong user name or password and at the end it show me error " This Apple ID is valid but is not an ICloud Account" then how can i use one account for same Apple ID and ICloud???

Dear Support Team,
Every time i tried to logon Icloud its gives me wrong user name or password and at the end it show me error " This Apple ID is valid but is not an ICloud Account" then how can i use one account for same Apple ID and ICloud?
Thanks

It is not possible to create a new iCloud account using a Windows machine. You must create the account using a Mac (10.7.5 or more) or an IOS device (iPhone etc). Once that is done you can sign into and use the account on your Windows machine.

I need to authorize my computer and I can't find the link for it. I went under Itunes store and there is no link "advanced" or "authorize computer"

I need to authorize my computer and I can't find the link for it. I looked under Itunes store and there are no links that say "advanced" or "authorize computer"

Authorization
Macs: iTunes Store- About authorization and deauthorization.
Windows: How to Authorize or Deauthorize iTunes | PCWorld.
In iTunes you use the Authorize This Computer or De-authorize This Computer option under the Store menu in iTunes' menubar. For Windows use the ALT-S keys to access it. Or turn on Windows 7 and 8 iTunes menus: iTunes- Turning on iTunes menus in Windows 8 and 7.

HT201363 I forgot I made an apple id years ago. I dont know the password nor can I remember the password for the email address I used years ago. Can anyone help me authorize my music I bought with my super old id?

I dont know the password nor can I remember the password for the email address I used years ago. Can anyone help me authorize my music I bought with my super old id?

See this -> Find My iPhone Activation Lock: Removing a device from a previous owner’s account
i just asked if someone knows the support mail, i don`t know how to someone from apple support
-> AppleID Support - Contact Support
Condolences to you and your family.

Have photoshop cs6 for windows and am now migrating to a mac with Yosemite installed. Where can I download the cs6 for mac? And can I use the same serial no that I received for windows.

Have photoshop cs6 for windows and am now migrating to a mac with Yosemite installed.
Where can I download the cs6 for mac? And can I use the same serial no that I received for windows.

You need to run a platform swap:
Order product | Platform, language swap
Until it's through, you can use the trial version.
Download CS6 products
Mylenium

How can I pull the BUKRS (company code) value, for a X_USER (sy-uname) inpu

HI Experts,
Pls. clarify that, How can I pull the BUKRS (company code) value, for a X_USER (sy-uname) as input?
ThanQ.

Check with USRM1 Table
give user name (Uname ) and you get company code (BUKRS)
also check with other tables : USRM* in SE11
Thanks
Seshu

Need to run the report for All Values when Null is passed in parameter

Hi All,
In my BIP report, I am using a parameter :asset with Type as Text, which means user will type the values for the parameter in the text box.
Now, this parameter can take multiple comma separated values. I have a requirement to run the report for All Values when user doesn't enter any value in the parameter text box and if user enters any value(s) then the report will run for those values . The way, I tried to handle that in the query using couple of ways was :
IMP : My Database is SQL Server
where
(table.asset = isnull((:asset), table.asset) or table.asset in (:asset))
Now this works fine when I give a single asset number but when I give multiple values separated by comma like 123, 345 in the text box, then the statement fails saying 'encountered ,'
I also tried simply
table.asset in isnull((:asset),table.asset) -- but this doesn't work as it doesn't allow me to use in operater while using isnull and if i will use = operater then it won't work in case of multiple values
Any suggestions on how can I handle this? Any help would be highly appreciated.
Thanks,
Ronny

thanks for replying, but i tried this option too, it did not work for me, neither isnull nor coalesce. I mean, the solution work for single value but when i pass multiple values then separated by a comma then it doesn't work and shows me an error like "Incorrect Syntax ','". I am using SQL server as DB and bip is 10.1.3.4.1
also please share the SR number, so i can also check the same.
can there be any other work around to this?
thanks,
ronny

I can not find the password for my keychain

I can nor remember the password for my local keychain. How do i change this?
Thanks.

There are several possible causes for this issue. Please take each of the following steps that you haven't already tried, testing after each one, until it's resolved. Back up all data before making any changes.
Step 1
Follow the directions in this support article.
Step 2
Launch the Keychain Access application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Keychain Access in the icon grid.
Select the iCloud keychain from the list on the left side of the Keychain Access window. If your default keychain has a different name, select that.
If the lock icon in the top left corner of the window shows that the keychain is locked, click to unlock it. You'll be prompted for the keychain password, which is the same as your login password.
Select
Keychain Access ▹ Keychain First Aid
from the menu bar and repair the keychain.
Step 3
Open the iCloud preference pane and uncheck the Keychain box. You'll be prompted to delete the local iCloud keychain. Confirm. Then re-check the box. Follow one of the procedures described in this support article to set up iCloud Keychain on an additional device.
Step 4
Open the Keychains folder as in Step 1. There should be a file in that folder with the name "login.keychain". If there is also a file iwith the name "login_renamed_1.keychain", then please do as follows:
Rename login.keychain to "login-old.keychain".
Rename login_renamed_1.keychain to "login.keychain".
You can then close the folder.
Delete the login keychain from the keychain list in Keychain Access. Choose Delete References when prompted, not Delete References & Files.
Select
File ▹ Add Keychain...
from the menu bar. Add back the file now named "login.keychain". If any of your needed keychain items are missing from it, also add back the file now named "login-old.keychain". I suggest you transfer any needed items from that keychain to the login keychain, then delete it. The transfers are made by drag-and-drop in Keychain Access. You'll need to enter your password for each item transferred.
Run Keychain First Aid again. Quit Keychain Access.

How can I fetch the element's attribute value by AS in a mxml file?

Sample code:
<mx:MenuBar id="myMenuBar" labelField="@label"
width="100%">
<mx:XMLList>
<menuitem label="MenuItem A">
<menuitem label="SubMenuItem A-1" enabled="false"/>
<menuitem label="SubMenuItem A-2"/>
</menuitem>
</mx:XMLList>
</mx:MenuBar>
How can I fetch the myMenuBar's width value by AS in a mxml
file. I can't find any API about it!

quote:
Originally posted by:
atta707
myMenuBar.width
assuming your AS file/class has access to this component
under the same id, myMenuBar.
Yes,you are right. Width is a existed property in myMenuBar
object in AS. I ignore this case.
But now, I want to fectch attribute "label"'s value in
<menuitem label="MenuItem A">.
How can I get attribute "label"'s value if "label" is
additional attribute for the element.

I have three different ipods with music on them and have had to replace our computer as it was in a fire. How can we combine the ipods into one ipod.

We had to replace our computer due to a fire and lost many of the fiels which were on them. Many were music files for the ipods, we have thre. Also, do not have ID's and passwords to the iTunes store.
How can we combine the information so that they are all in each one or at least compbine everything into one ipod?

Just so you know the method suggested by Nelsonleee will cost your $29.95 USD, Yamipod is free.

Can not view the code for views, triggers or table definition

Hello Gurus,
I can not see the code for any of the triggers, views, tables etc. in sql developer. For instance a view code will be
"create or replace" and then nothing, I could see the code in the past.
When clicking on SQL tab for table I get following errors
1. Ora-00904 Invalid Column name
2. Ora-31600: invalid input value emit_schema for parameter name in function SET_TRANSFORM_PARAMORA-06512: at SYs.DBMS_SYS_ERROR............................
please advice.
Thanks

Sqldev was only certified starting from 9.0.2, so it's possible that's the culprit. The latest update in the certification document even omits 9i entirely.
Did it start happening after upgrading sqldev? What version are you on?
K.

How can we specify the Mailbox for Notes?

In Mail.app, how can we specify the Mailbox for Notes (where the new notes will be resided)? It is now 'On My Mac'. I wish to change to my IMAP Mailbox so it sync with my iPhone by just checking email (not by syncing on iTunes).
Thanks in advance.
Message was edited by: Ekapon

You could use the DecimalFormat or NumberFormat to do the job.
double number 1234.567;
DecimalForamt df = new DecimalFormat("###.##");
String s = df.format(number);or
double number 1234.567;
NumberFormat nf = NumberFormat.getNumberInstance();
nf.setMaximumFractionDigits(2);
/* if needed.
   nf.setMaximumIntegerDigits(value);
   nf.setMinimumFractionDigits(value);
   nf.setMinimumIntegerDigits(value); */
String s = nf.format(number);I didn't test the codes but they should work. For more information, please consult the documentations.

HT3702 how can i remove the authorization hold from my card...

how can i remove the authorization hold from my card

You can try contacting iTunes support : http://www.apple.com/support/itunes/contact/ - click on Express Lane, then iTunes > iTunes Store
How much was the amount ? A 'normal' holding charge is a small amount (e.g. equivalent to about $1), and usually happens after you add or change credit card details on your account. Here in the UK it can take a few working days for it to disappear (so a weekend can extend the elapsed time).
Edit : I don't know what a non-liability certificate is and/or whether Apple can do one.

Can we combine the authorizations for same value?

Similar Messages

Maybe you are looking for