Can we combine the two tables for Report Painter

Hi,
For making the report in Report Painter, I am not getting all the required characteristics and Key figures all in one table / Library.
The required ones are in Table KKBC, GLT0 and CCSS.
Is it possible to combine these tables and make a new one so that I can create the Library and can use that Library while making the report in Report Painter.
Or is there any other work around to get the my required charcateristics and Key Figures so that I can make the report easily?
I dont want to go through ABAP route.
Kindly help.
Regards
Kami

Thanks Bulut for your reply,
But by going through View creation involves ABAP help, that I dont want.
However, is it poosible to use View while creating the reports in Report Painter? I am not sure.
I want to know whether can we create a table which is used for report painter, so that I can use for creating the Library and then the reports.
I hope you understand my point.
Regards
Kami

Similar Messages

I accidentally bought two subscriptions to convert PDFs to word. Can you combine the two subscriptin

I accidentally bought two subscriptions to convert PDFs to word. Can you combine the two subscriptions?

Contact Adobe Customer Care via http://helpx.adobe.com/contact.html?product=export-pdf

DB Table for Report Painter

Hi all,
Can anybody please let me know in which db table the details of the Report Painter are stored?
If I have a Transaction Code, I want to know if that transaction code is created for Report Painter or not through program not through SE93.
I have to create a report on all Z Transaction Codes.
Thanks in advance.

Hi Mr.A ,
while creating tcode for report painters we will take option PARAMETER Transaction code , so based on the transaction type u can find out from the same tables - TSTCP or TSTC.
regards
Prabhu

Sliding window sanario in PTF vs Availability of recently loaded data in the staging table for reporting purpose

Hello everybody, I am a SQL server DBA and I am planning to implement table partitioning on some of our large tables in our data warehouse. I
am thinking to design it using the sliding window scenario. I do have one concern though; I think the staging tables we use for new data loading and for switching out the old partition are going to be non-partitioned, right?? Well, I don't have an issue with
the second staging table that is used for switching out the old partition. My concern is on the first staging table that we use it for switch in purpose, since this table is non-partitioned and holding the new data, HOW ARE WE GOING TO USE/access THIS DATA
FOR REPORTING PURPOSE before we switch in to our target partitioned table????? say, this staging table is holding a one month worth of data and we will be switching it at the end of the month. Correct me if I am wrong okay, one way I can think of accessing
this non-portioned staging table is by creating views, which we don’t want to change our codes.
Do you guys share us your thoughts, experiences???
We really appreciate your help.

Hi BG516,
According to your description, you need to implement table partitioning on some of our large tables in our data warehouse, the problem is that you need the partition table only hold a month data, please correct me if I have anything misunderstanding.
In this case, you can create non-partitioned table, import the records which age is more than one month into the new created table. Leave the records which age is less than one month on the table in your data warehouse Then you need to create job to
copy the data from partition table into non-partitioned table at the last day of each month. In this case, the partition table only contain the data for current month. Please refer to the link below to see the details.
http://blog.sqlauthority.com/2007/08/15/sql-server-insert-data-from-one-table-to-another-table-insert-into-select-select-into-table/
https://msdn.microsoft.com/en-us/library/ms190268.aspx?f=255&MSPPError=-2147217396
If this is not what you want, please provide us more information, so that we can make further analysis.
Regards,
Charlie Liao
TechNet Community Support

Change the default setting for report painter reports.

HI All
Can we change the default setting in SAP/R3 in the report painter reports for the selection screen options?
If yes,Please let me know how we can change the default settings.
Thanks in Advance
Best regards
Venu

HI
We have a report developed in the report painter for profit center accounting and we have selection screen for this report.
Few of the selection screen fields parameter are set by default and we need to change the default setting for the selection screen fields parameters.
How and where do we set or change the default parameters for the selection screen ?
Thanks in advance
Best Regards
Venugopal

FI table for Report painter

Which table I will take to create FI report in Report Painter ?
Please help me..
Thanks & Regards,
Ananda

Hi,
If you are in ECC environment use Table FAGLFLEXT is suitable to create Library & Report Group & Report by using report painter.
if you are in ECC but not actvation new GL / you are in up to 4.7 then use table GLT0
regards
Viswa

TS1702 My Computer Went down that has the majority of my apps on it...I do have iCloud...but it appears to be worthless for my Apps...I had to get a totally new HD...& I do have access to the old HD Files...but how can I combine the two HD's? This is a JO

I've lost my Apps....Paid good Money for most...and my computer went down...my HD had to be replaced as well...so I am on a NEW HD...I was able to pay someone to pull my files...but I had to start from scratch with Win 7...I thought for sure since I use iCloud & I have my ID...that all would be well....but apparently NOT! More Crap from Apple....really shouldn't be this difficult guys for HONEST PAYING Customers! Someone...Anyone???

A manual backup before you sync for the first time will save your content to the new PC.
Apps and other media can be downloaded again for free:
Downloading past purchases from the App Store, iBookstore, and iTunes Store
Follow this user tip by wjosten to save your data and settings to a new PC:
Syncing to a "New" Computer or replacing a "crashed" Hard Drive
or this one by turningtest2:
Recovering your iTunes library from your iPod or iOS device

Can you combine the two sides of an Xserve RAID into a single drive?

I am looking to combine my Xserve sides into a single drive so that it will be more efficient for storing beyond hi-def video. I have an Xserve RAID with 14x750GB drives which format in RAID5 down to 4.09TB per side. I want to create a singe 8.18TB drive from these.
Is there an easy way to do it?

Thanks for the info William, I did backup a few important files before this happened, but I would like to get to a few more.
It happened when our IT guy was showing me how to create a new RAID set. He created a set while explaining a few things, then selected the new one he made, and deleted it. Right then, both sets disappeared and were deleted, the empty one he made, and the one we needed. I was watching him, and he didn't select both, just the empty one he'd made. So, I was hoping that there would be a work around just so that I could maybe use a data rescue utility to possibly pair the 2 together long enough for me to back up some files.
If anyone has any recommendations, please let me know.
thank you.

I have 2 separate ITunes accounts. One with old email address. Second with new email addy. How can I combine the two ?

I have 2 iTunes accounts, one in old emaill addy and one in new. How do i combine them?

You cannot.
Frequently asked questions about Apple ID - http://support.apple.com/kb/HE37

SAP Report Painter - SAP tables for report items and hierarchy

Hello,
can you pls. help me with an information about the list of SAP tables for Report Painter, particularly the tables where the report items/positions and report hierarchy are stored?
for example, for the Report Writer report items and report hierarchy can be found in T8* tables.
What are these tables for Report Painter?
thank you in advance for any info.
Regards,
Jasminka
Edited by: Jasminka Vlahovic on Dec 29, 2010 8:53 PM

Hi Jasminika ,
Could you please share with me those tables names where report items and hierarchy are saved
Regards
Neeraj

Adjusting the SID table for master data infoobject

Hai
Im trying to activate one master data infoobject. But it says the error like below
<b>The SID Table /BI0/SBBP_DELREF must be converted incompatibly with an activation of characteristic 0BBP_DELREF (changes to the key in the table). Table /BI0/SBBP_DELREF contains data. Parts of this data were lost in the conversion</b>.
or
<b>Undo the changes that led to the incompatible conversion (the changes in the key) or delete all data from table /BI0/SBBP_DELREF.</b>
So how can i adjust the SID table for this .
pls tell me
kumar

Hi,
you'll have to delete ALL the master data for this IObj. Therfore you'll have to
delete all data in ALL the IObjs using 0BBP_DELREF (ODS, CUbes and characteristics).
Then activate your IObj. You will go through some step which I explained in the
following thread
Re: Urgent...Company Code lenght has been changed
Extract:
1. Delete 0COMP_CODE master data.
- get objects list using 0COMP_CODE with loaded data: I suggest to delete
master data via AWB (right click the characteristic). If it can't be deleted because
it is used display the deletion log (via AWB or tx SLG1 / RSDMD, MD_DEL).
- delete loaded data for the list above.
This should not be too much since you are in DEV.
2. change 0COMP_CODE length
- change the length to 4;
*- Activate your IObj. You'll get a popup log, validate. Activate despite warning and
errors. You will get An error message, validate.
You should get an horizontal pane with the activation log. Read it for your personal culture but if you don't have time then don't...
- Next the system will prompt to convert the tables: answer YES. The system will ask to schedule the table conv. in the background, go4it.
- next is the SE14 screen for the P table: Hit Activate and adjust (Direct
execution, or in the back as you wish). Answer yes to the mass processing
question and yes (again) for request adjust online. Your table should be converted successfully.
- go back twice from this screen (leaving SE14 tx and return to RSD1). reread the update log if you wish.
- repeat from the *- above... it will perform the very same for all other P tables of IObj using 0COMP_CODE and the 0COMP_CODE S table.
Your IObj is reactivated again. So should your ODS/DSO objects (check activate for example). Cube didn't need to convert tables since the MDID is note posted in any table of a cube.
Please note that once your IObj is in revised version you can perform the same via the menu extras / database table / convert all (see my previous post).
Now you have to evaluate the task. Of course that is a work to fix the mistake.
Depending on when it has be changed it may be worth to restore your DEV sys with a backup (loose work performed from the backup until now).
hope this helps... otherwise, revert.
Olivier.

How can I update the trigger table?

I need a insert trigger on a table and also wants to insert the result value in one of its field.
it gives mutating error........
so wots the way of updating it? how can i update the same table.

For example like this (inside the BEGIN/END section of the trigger):
:NEW.Col2 := :NEW.Col1;
C.

Where can I find the accuracy table !!!

Hi..
Anybody knows where can I find the accuracy table for calculate the accuracy for DAQ and SCXI
(I want to calculate by hand, without using Accuracy calculator)
Thanks in advance for any kind help.

Hi Nok,
I think that KB 2X4HGEBG should help.
Regards,
Luca
Regards,
Luca

Configuration doc for Report painter

Hi Friends,
Can any one send configuration document for Report painter?
[email protected]
Regards
Babu

hi
find this link
http://www.virtuosollc.com/PDF/Get_Reporter.pdf

Can we implement the custom sql query in CR for joining the two tables

Hi All,
Is there anyway to implement the custom sql query in CR for joining the two tables?
My requirement here is I need to write sql logics for joining the two tables...
Thanks,
Gana

In the Database Expert, expand the Create New Connection folder and browse the subfolders to locate your data source.
Log on to your data source if necessary.
Under your data source, double-click the Add Command node.
In the Add Command to Report dialog box, enter an appropriate query/command for the data source you have opened.
For example:
SELECT
    Customer.`Customer ID`,
    Customer.`Customer Name`,
    Customer.`Last Year's Sales`,
    Customer.`Region`,
    Customer.`Country`,
    Orders.`Order Amount`,
    Orders.`Customer ID`,
    Orders.`Order Date`
FROM
    Customer Customer INNER JOIN Orders Orders ON
        Customer.`Customer ID` = Orders.`Customer ID`
WHERE
    (Customer.`Country` = 'USA' OR
    Customer.`Country` = 'Canada') AND
    Customer.`Last Year's Sales` < 10000.
ORDER BY
    Customer.`Country` ASC,
    Customer.`Region` ASC
Note: The use of double or single quotes (and other SQL syntax) is determined by the database driver used by your report. You must, however, manually add the quotes and other elements of the syntax as you create the command.
Optionally, you can create a parameter for your command by clicking Create and entering information in the Command Parameter dialog box.
For more information about creating parameters, see To create a parameter for a command object.
Click OK.
You are returned to the Report Designer. In the Field Explorer, under Database Fields, a Command table appears listing the database fields you specified.
Note:
To construct the virtual table from your Command, the command must be executed once. If the command has parameters, you will be prompted to enter values for each one.
By default, your command is called Command. You can change its alias by selecting it and pressing F2.

Can we combine the two tables for Report Painter

Similar Messages

Maybe you are looking for