Can we configure mirooring and log hsipping both DR in one database?

Can we configure mirooring and log hsipping both DR in one database?
If yes how it does work.
Many Thanks
Shashikala

You
CAN definitely use log shipping and mirroring at the same time. You can make use of log shipping to ship the log to a remote site for DR and have a database-mirroring, high-availability configuration locally. However, Sometimes it
is a slight bit tiresome to set up log shipping going the other way once a failover has occurred, whereas mirroring is easy in that portion.
Some DBA use this two together if you they have to use bulk-logged recovery model, since mirroring only uses the full recovery model and in another scenario in database mirroring, we cannot
use mirroring database as reporting (cannot query) unless we don’t create snapshot out it, but in log shipping, the database is in standby mode so we can query if it is not being restored at the same time.
Please remember to click “Mark as Answer” on the post that has answered your question as it is very relevant to other community members dealing with same problem in seeking the right answer

Similar Messages

HT200241 Can Apple Configurator deploy and modify Apple TV iOS 6.0 settings? For instance, what if I wanted to submit a 'reset all settings' command, but not a 'factory restore'?

Can Apple Configurator deploy and modify Apple TV iOS 6.0 settings? For instance, what if I wanted to submit a 'reset all settings' command, but not a 'factory restore'?

Did you follow the instructions here:
http://support.apple.com/kb/HT4367
Pay attention to differences in power connection depending on whether or not you have AppleTV2 or AppleTV 3.
Also some microUSB leads don't seem to work - try another if you can. Disconnect superfluous USB device/hubs too if possible.
AC

If I have a single, individual membership can I put Lightroom and Photoshop on both of my computers?

If I have a single, individual membership can I put Lightroom and Photoshop on both of my computers?

Yes. You are permitted two activations.

HT204053 I've got a new Iphone but still want to use my Ipod, can I have music and apps on both and if so how do I update them both?

Hi, I've just upgraded to an Iphone 4s but still want to use my Ipod. Can you have music and apps on both and if so how do you keep them updated? Is there a step by step guide anywhere? Thanks

"Can you have music and apps on both "
Yes.
"how do you keep them updated?"
Not sure what you mean.
"Is there a step by step guide anywhere? "
Guide for what?
Sync each of them as always. There is no need to do anything, just sync them to your computer.

I used to share one apple ID/account with my ex but made a new one for myself recently and logged out of the old one but when I try to update my iBooks it asks for the old account's password(which my ex changed by now)

I used to share one apple ID/account with my ex but made a new one for myself recently and logged out of the old one but when I try to update my iBooks (only happens with this app)it asks for the other account's password(which my ex changed by now). I don't understand why this happens when I'm logged into my account and it only happens with that app. Please help, I need to update. :/

Content (apps, music, ibooks, films etc) is tied to the account that originally downloaded it, so if the iBooks app was downloaded using the account that you used to share with your ex then only that account can download updates to it. As it's a free app you could delete it and re-download it under your own account - and then re-download your ibooks into it (or copy the books to your computer's iTunes first via File > Transfer Purchases and then sync them back to the app).

How can I transfer photos and videos from iPad to HTC one X using wi fi?

How can I transfer photos and videos from iPad to HTC one X using wi fi?

There are apps that will do this as well.
http://www.wirelesstransferapp.com

OWB 10gR2 : How to configure ctl and log locations for Sql*Loader mappings?

Hi all,
I'm using OWB 10gR2 to load data in tables with Sql*Loader mappings.
In my project I have a datafile module and an Oracle module.
When creating an sql*loader mapping in the oracle module, there is two properties for this mappings that I want to modify. The first is Control File Location and the second is Log File Location. Values for those properties are equal to the data file module location. When trying to change those values I can only chose "Use module configuration location".
Somebody knows how to configure those properties with different locations as the one of the flat file module?
What I want to do is to store the data file in one directory, and control file and log file in other directories.
Thank you for your help.
Bernard

Hi,
You're right, my problem is that the dropdown only show the location associated with the flat file location even if I have other file locations created in the design repository.
The good news is that I have found the solution to solve the problem :
1) Edit the file module and in tab "Data locations", add the locations you want to use for control file and log file.
2) Open configuration window of the mapping and then the dropdown for properties Control File Location and Log File Location show new locations
I have tested my mapping after changing those properties and it's working.
Bernard

Can we configure EAS and Shared services wih out a Database

Hi All,
Can any one please let me know if we can configure Essbase administration servies ans Shared services with out giving Database details while configuring.
If Database schema is not yet ready to use, is it possible to configure EAS and login to Essbase to create an outline with dimension building and Dataloading.
Regards

Hi,
I doubt it as when you start up the web applications they try and communicate with the databases, if they fail then the web app won't start up fully.
Cheers
John
http://john-goodwin.blogspot.com/

Can we install Vision and Fresh DB (both instances)

Hi,
I would like to install Fresh DB and Vision Apps (both instances) separately on Single machine?
I have already installed Fresh DB and planning to install Vision DB also (for BI Apps purpose).
Thanks,
Srinivas

Hi Hussein,
1) I have tried to create all the space required and as per below details, you can see the LV has enough space. But df -h does not reflect. I have tried to expand partition details given below. This installation is on VMWare of Linux. Host OS is Windows 7.
[srinivas@linux rapidwiz]$ df -h
Filesystem Size Used Avail Use% Mounted on
/dev/mapper/VolGroup00-LogVol00
291G 133G _144G_ 49% /
[srinivas@linux rapidwiz]$ lvscan
bash: lvscan: command not found
[srinivas@linux rapidwiz]$ su -
Password:
[root@linux ~]# lvscan
Incorrect metadata area header checksum
ACTIVE '/dev/VolGroup00/LogVol00' _[*393.94 GB*]_ inherit
ACTIVE '/dev/VolGroup00/LogVol01' [4.94 GB] inherit
[root@linux ~]# fdisk -l
Disk /dev/hda: 322.1 GB, 322122547200 bytes
255 heads, 63 sectors/track, 39162 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Device Boot Start End Blocks Id System
/dev/hda1 * 1 13 104391 83 Linux
/dev/hda2 14 39162 314464342+ 8e Linux LVM
Disk /dev/hdd: 107.3 GB, 107374182400 bytes
15 heads, 63 sectors/track, 221920 cylinders
Units = cylinders of 945 * 512 = 483840 bytes
Device Boot Start End Blocks Id System
*/dev/hdd1 1 221920 104857168+ 8e Linux LVM*
[root@linux ~]# resize2fs /dev/VolGroup00/LogVol00
resize2fs 1.35 (28-Feb-2004)
/dev/VolGroup00/LogVol00 is mounted; can't resize a mounted filesystem!
[root@linux ~]# umount /dev/VolGroup00/LogVol00
umount: /: device is busy
umount: /: device is busy
[root@linux ~]#
I have tried above steps as per information at: http://www.question-defense.com/2010/11/13/expand-a-partition-that-is-part-of-a-logical-volume-group-while-server-is-running
2) Other option is, Can we install R12 on Windows 7? I don't see exact version of Windows OS to install R12 anywhere.
Thanks,
Srinivas

How the Payload Message and Logs are stored in the B1i Database Table: BZSTDOC

I would appreciate it if someone could provide any documentation regarding B1i database further maintenance.
for example:
I want to know how the payload message and logs are stored in the table BZSTDOC, and how can we retrieve the payload message directly from the column DOCDATA.
As described in the B1iSNGuide05 3.2 LogGarbageCollection:
to avoid the overload of the B1i Database, I set the Backup Buffer to 90 days : so this means Message Logs from the last 90 days will always be available, but is there some way we can save those old messages to a disk so that I can retrieve the payload message anytime?
in addition, let’s assume the worst, the B1iSN server or the B1i database damaged, Can we just simply restore the B1i database from a latest backup DB then it can work automatically after the B1iSN server is up and running again?
BR/Jim

Dear SAP,
Two weeks passed, I still haven't received any feedback from you guys.
Could you please have a look at my question?
How is this Question going? Is it Untouched/Solving/Reassigned ?

Can I configure my Bluetooth connections to use more than one wireless audio output device at the same time?

I am trying to get my Macbook Pro (OS X 10.8.5) Bluetooth system to recognize 2 different wireless speakers at the same time. both are currently paired with mu computer and can be chosen independently and work nicely.

Version 10.0.3 is the latest version of iMovie. iMove '11 (as in 2011) is version 9.
iMovie saves your Projects automatically. So you can just choose to create a new Project. Your existing Projects will remain available for you to go back to whenever you like.
You can have as many Projects as you like. You don't need ot finish one before you begin another.
Post back if you have specific questions.
Matt

I am new to Windows 8 and would like to view my .pdf's (like I could in Windows XP) on a window I can shrink so I can open additional software and shrink so both pages are open next to each other on the window. I am very frustrated at this point with Wi

PLEASE HELP!

Many people have this experience with Windows 8, which is becoming a byword for unpopularity.
Still, a bit of basic understanding is important. People have got used to just getting a new version of Windows and using it, without training or study. Not any more, thanks to Microsoft's bright ideas.
Here are some very crucial things about Windows 8.
1. Windows 8 has a new kind of app (program). These new kinds of apps take over the whole screen. Microsoft thinks these are the future. I won't tell you what I think. Except, if this new world is so great, why don't Microsoft use it for their own Office apps. A
2. The old world of Windows 7 and before is still available with most Windows 8 computers, except some cheap tablets and phones. Microsoft like to call this an app called "Desktop" which is really all of the old-fashioned, windows-can-be-resized, apps together.
3. Most apps are "new world" or "old world". Everything in the App Store is new world - that's the rule. A few apps (like Internet Explorer) can run in either world.
4. Windows 8 comes with a PDF reader "out of the box". This runs only in the new world and it's called "Microsoft Reader". Don't bother with it.
5. Adobe produce a "new world" PDF reader called "Adobe Reader Touch". Marginally better than Microsoft Reader, it's just not a patch on the old one; there are loads of things it doesn't do, and worst of all it's always full screen because Microsoft said so. No need to use it. Just download the old world Reader from http://get.adobe.com/reader as usual. (Be sure to turn off the unwanted "free offers"!!)

DNS / BIND - Can I configure primary and standby forwarders?

Hi all,
I have on Solaris 10 (x86) a DNS server (BIND 9.3.6-P1) that relies exclusively on two “forwarders”: 155.28.144.13and 154.23.134.32.
The configuration is as follow:
# cat /etc/named.conf
acl "CSClan" { 192.168.4.0/24; 192.168.7.0/24; }; //CSC internal LAN ip address range
options {
        directory "/var/named";
        forward only;
        forwarders {
                155.28.144.13;
                154.23.134.32;
             allow-query { "localnets"; };
# cat /etc/resolv.conf
nameserver 127.0.0.1
When I check with snoop, I can see requests sometimes to one forwarder, sometimes to the other.
Is it possible to configure DNS to use primarily one forwarder?
Thanks in advance for your support.
Best Regards,
Rui Vilão

In 10g, dataguard started to support different binaries on primary and standby database servers with the same OS family. For example Microsoft Windows 64-bit on primary and Microsoft Windows 32-bit or Microsoft Windows 64-bit for AMD on standby database server. However with 11g, dataguard also supports different OS on primary and standby servers
Role Transitions for Data Guard Configurations Using Mixed Oracle Binaries [ID 414043.1]
Data Guard Support for Heterogeneous Primary and Physical Standbys in Same Data Guard Configuration [ID 413484.1]

I have two creative cloud accounts one for work and one is my personal, can I access files and settings from both on one computer?

Basically I have had my creative cloud account for over a year and recently at work they just set me up with one. Can I keep both active on the same computer? My home laptop is sometimes used to do work so I would like to access files on either cloud drive as well as share program settings.
Thanks in advance!

This is essentially my question as well - I have a personal CC account and I would like to use my personal libraries on my work computer.
Since that involves signing in to CC on my work computer, I am wondering if that will mess up my employer's CC license on my computer (or in general)
Anyone at Adobe have an opinion on this question?

Can you have Firefox and IE browsers both at the same time and if so, do you have the choice of choosing one for a default browser?

I am using IE Explorer now presently. I want to be able to download and install the SEO Blogger tool from Wordtracker but it says that I have to have Firefox as the browser. Since I have everything else already set up under IE, I don't want to have to change all that just so I can download one program.
Can you help?
Thanks,
David Craig

You can have both browsers installed and running at the same time. You can also choose what one to have as the default browser.

Can we configure mirooring and log hsipping both DR in one database?

Similar Messages

Maybe you are looking for