Can we connect another system say SRM,BI with persona(without add on)

Hi ,
I have installed SAP Screen Persona's in one my ECC system ,so can I connect the sap persona's to other landscape system for ex SRM ,BI etc without installing any add on it ?As in same ECC system one system we can take main system and other as target system so can i take a SRM system as target and persona's will work on it.Kindly clarify Sushant Priyadarshi any comments.
Thanx
Niti

Hi Niti,
In config guide for Persona 2.0 under the section maintained system SAP has clearly mentioned that you can make your one system for ex (ECC) as a source system and then connect your other system as a target by maintaining logical system in SPRO only prerequisite should be your SAP kernal should be 7.21 or 7.40 or higher
Follow the procedure for the SPRO configuration and after that just do the below configuration
Maintain the following parameters under System Settings:
o Service.Uri – Maintain the service name for accessing SAP Screen Personas
here. The default service is /restgui.
o Server.Url – Maintain the server link for the system here. For example:
https://ldfss600.pal.ess.corp:50015
Go thorugh the config guide for detailed steps by clicking below link
https://websmp202.sap-ag.de/instguides
Regards,
Prasad Deshpande

Similar Messages

Hi, can someone help me how can i connected my multimeter to my pc with rs232, because my computer can´t recognize the device, i mean the multimeter, is a multimeter keithley serie 2400, and i already downloaded all the drivers for labview even the VISA

hi, can someone help me how can i connected my multimeter to my pc with rs232, because my computer can´t recognize the device, i mean the multimeter, is a multimeter keithley serie 2400, and i already downloaded all the drivers for labview even the VISA

Marco,
Here are some suggestions:
1) Check the manual the Keithley manual to see how to configure the RS-232.
    On some models you need set Factory defaults to USER and turn on the RS-232.
    Also there may be a setting for SCPI which you want on (probably on by default).
2) On your PC - open Device Manager. See if a COM port exists and is functional.
     You must get this working before continuing.
      You can set the COM port parameters by right clicking and selecting Properties.
     (On some PCs the onboard ports can be disabled in the BIOS)
3) If step two was OK, open MAX (Measurement and Automation eXplorer).
    On the left side, click on Devices and Hardware.
    Click on Serial and Parallel.
    Go to the COM port you found in Device Manager.
    Open a VISA Test Panel.
    Now I don't have one I can look at right now, so this is general idea:
   Configure the COM port to match the Keithley settings (should be OK if step 2 worked)
   Go to the (I think) Input Output tab (you want to send a command)
   The command string input should already have a *IDN? entered, if not, type it in.
   Click on the Query button to send the command and check the response.
   If you get an ID string back (Company name, Model, FW Version ...) then it works.
   (Disregard an error saying it did not get enough charcters back.)
I hope this helps,
steve
Help the forum when you get help. Click the "Solution?" icon on the reply that answers your
question. Give "Kudos" to replies that help.

Can't connect to my home wi-fi with new Iphone 5?

can't connect to my home wi-fi with new Iphone 5

When you say it doesn't detect the network - is that under "Settings->Wi-Fi"? It doesn't show your network at all?
This may sound like a stupid question but since I've learned never to leave any stone unturned - you don't have your SSID set to "hidden" do you?

How can i connect my iphone to a new itunes library without losing my contacts and photos ?

how can i connect my iphone to a new itunes library without losing my contacts and photos ?

Is the new iTunes library on a different computer, or the same computer?
Are you concerned about photos that you have taken with the iPhone in the Camera Roll, or photos you have synced to the iPhone from your computer?
Contacts should be configured to sync with an app on your computer. You set this up in iTunes on the Info tab with the iPhone connected. You will not lose any contacts if the app on your computer has at least one contact.

Can I connect ps4 to my Macbook Pro with retina so it displays on the Macbook Pro.

Can I connect ps4 to my Macbook Pro with retina so it displays on the Macbook Pro . If I can how do I do it and what do i need to do it.

No. There's no video input.

How can I connect to a database from ipaq with cldc??

how can I connect to a database from ipaq with cldc??

Hi Again
There is a library by Mimer which allows you do connect to a Mimer SQL Server, don't know must about it, but here is a link.
http://developer.mimer.com/
If that doesn't suit you, I suspect that you will have to use some sort of proxy solution. Either by creating a servlet to accept the sql string you want to send, or by creating your own custom proxy server running J2EE. The servlet or the proxy server must be able to receive an SQL String, do the query to the actual database and return the results in some sort of format to the mobile device. Maybe just a space delimited string.
Hope this helps
-Daur

Can I connect MacMini 2009 to Thunderbolt Display with Adapter Cable

Can I connect MacMini 2009 to Thunderbolt Display with Adapter Cable (Mini Display to Thunderbolt Adapter)

Sorry but no you can't.
Only Macs with ThunderBolt ports can be used with the ThunderBolt Display and the 2009 Mac Mini doesn't have a ThunderBolt port.
Which computers can I use with my Thunderbolt display?
Stefan

Upgrade ip5 to ios6.0.2 and now I can't connect to the network (was fine with 6.0.1).

I just upgraded my ip5 to ios6.0.2 and now I can't connect to the network (was fine with 6.0.1). I bought the phone online in Canada but have a Hong Kong simcard. Any solution to connect to network?

I bought mine in the US and activated using a German SIM. It worked fine first on 6.0.1. After upgrading to 6.0.2 the SIM does not work. I have reset the reset the phone and still does not work. I loaded a new SIM and the phone worked for few minutes before going to Searching mode after I restarted the device. I am being told by the Genius Bar team that this is a Hardware failure.

Can I connect my Mac (Mac OS X) with other machine (Windows OS) on same LAN using telnet in terminal? For example, telnet ip address of other machine

Can I connect my Mac (Mac OS X) with other machine (Windows OS) on same LAN using telnet in terminal?
For example, telnet <ip address of other machine>
I m a networking student and I have learned to connect 2 machines on Red hat Linux OS on same Ethernet LAN which has same subnet mask. As Mac OS X is also a linux based OS I m trying to connect my Mac with my friends windows based machine using telnet <ip address of his machine>. However, I get a message "unable to connect to remote host".
Can anyone please tell me is this the problem because of different OS or it is something different!
Please reply...it will of great help..

The machine you're trying to connect to needs a Telnet server running on it - telnetd listening on port 23 (usually).
Incidentally, Mac OS X is not a Linux based OS, it is based on BSD Unix.

I'd like a basic icon in the lock screen to indicate Text, Email etc. Seems all I can have in lock screen is full alert (with or without detail) or am I missing something?

I'd like a basic icon in the lock screen to indicate Text, Email etc. Seems all I can have in lock screen is full alert (with or without detail) or am I missing something?

I'd like a basic icon in the lock screen to indicate Text, Email etc. Seems all I can have in lock screen is full alert (with or without detail) or am I missing something?

Im trying to install new version of itunes in my macbook but its always failed .i can download but cannot install says to contact with software manufacturer assistance....please solve my problem because of this i couldnt connect my iphone to my mac.....

im trying to install new version of itunes in my macbook but always failed.i can download it but failed to install and always says to contact with software manufacturer for assistance...please heblp me i couldn’t connect my iphone to iktunes..please coz in my mac their is old version of i tunes.....

Welcome to the Apple Support Communities
See if your computer is supported > http://support.apple.com/kb/sp575 Buy Snow Leopard > http://store.apple.com/us/product/MC573/mac-os-x-106-snow-leopard Then, make a backup, insert the DVD and upgrade. Finally, go to  > Software Update and update to the latest version.
If your computer is compatible, you can use Mountain Lion. Open App Store and purchase Mountain Lion. Check if your programs are supported > http://www.roaringapps.com

I have an apple ipad 1 and suddenly I can't connect to itunes says cannot allocate memorary what do I do, I have an apple ipad 1 and suddenly I can't connect to itunes says cannot allocate memorary what do I do

I have an ipad 1 and all was fine until the other day and now I can't connect to itunes a box pops up saying cannot allocate memory, what does this mean and howdo I fix it

Try quitting all apps and restart your iPad. Maybe you are running out of memory on the iPad. It's worth a try.
Go to the home screen first by tapping the home button. Quit/close open apps by double tapping the home button and the task bar will appear with all of you recent/open apps displayed at the bottom. Tap and hold down on any app icon until it begins to wiggle. Tap the minus sign in the upper left corner to close the apps. Restart the iPad.
Restart the iPad by holding down on the sleep button until the red slider appears and then slide to shut off. To power up hold the sleep button until the Apple logo appears and let go of the button.
Or try a reset,
Reset the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons.

Can't connect to router through airport (problem with encryption)

We have a small office network with several computers connected to a wireless router. A while back all the macs using airport suddenly were no longer able to connect to the internet (email still worked fine) while the windows computers on wireless and macs on lan still work fine.
The router is using WPA personal encryption, and when using this the macs can connect to the wireless network no problems, but then they aren't able to use the internet. as i said though email still works without any problems. We spoke to the tech support at our ISP but macs aren't very common in south africa, so they just suggest we change the encryption from WPA to WEP encryption. I tried both 64 bit and 128 bit but every time i get an error saying: There was an error joining airport network. If I turn off encryption though everything works fine and the macs are able to access the internet without any problems. Anybody have any ideas what might be wrong?

I am having the same problems since 3 days ago (Imac core 2 duo 20" 2,16). I think it was after the 10.4.10 upgrade.
I haven't tested if I can connect an open network (without encryption).
I can't connect to internet using the wifi network... sometimes, i can't even locate the SSID's network.
Even using windows xp with bootcamp i can't use the network, so it's really strange. This can only be firmware/hardware... cause XP on my mac was able to connect and now it can't too. I tried with other computers (notebook) and i can connect without problems.
Have you solved this issue ?
Anyone can help?
Joao Oliveira

Can you connect a Time Capsule to Macbook with USB cable?

I have a 2nd generation TC that I was using as a storage device. I used to be able to connect to it wirelessly and send files there for storage. Now I can no longer do that. It does not show up in my devices. I also tried to hook up via USB and when I do that I can not connect then either. Am I doing something wrong? Any help is greatly appreciated. I have about 50 gb of photos and home video stored on here that I can't get to anymore. I am running
OS X 10.8.4 for my system.

You cannot connect to a TC by USB.. it is now and forever a network drive not a local or external disk.
The best way to access it is to plug in by ethernet.. factory reset the TC and see if you can access it just like that.. otherwise set it to bridge mode and plug in to the main router.
Tell us if you still have issues.
Note a Gen2 is getting pretty old.. it has to have front led at least blinking amber to be working.. many are dead.. many are about to die.. some have dead hard disks.

Can't connect my BT Headset Plantronics 975 with OS 4.01

Hello,
with my 3GS with OS 3.x and 4.0 my Plantronics 975 works fine.
After the Update of OS 4.01 I can't connect the Headset with the IPhone, it dosn't find.
Any ideas?
Regards Ulrich

Wait, i just read https://discussions.apple.com/message/15737481#15737481. Had to hold down the keyboard Bluetooth button until the light flashed red then green. Problem solved :-)

Can we connect another system say SRM,BI with persona(without add on)

Similar Messages

Maybe you are looking for