Can we connect Heart beat IP with cross cable
We have 2 DB serverv , on each server we have 4 NIC ,2 for data 2(heart beat IP) for cluster .
I want to connect both server's heart beat IP through cross cable.
Please suggest the pros and cons as its very important in my case.
Edited by: user11256753 on 10 Jun, 2009 10:54 AM
Surachart is right, I just want to add a little bit of explanation. When you use a cross-cable and the nic of one of the nodes fail, the link will be dead on both ends and your cluster won't know which node is the faulty one. But when you connect both of them to a switch, the healthy one will at least still recognise an ethernet link.
Bjoern
Similar Messages
-
HT1338 i can not connect my beats headphone with my mackbook pro? any advise plase?
any advise? how can i connect my beats headphone ith my mackbook pro?
I didnt get it sorted, i had to change my accounts to outlook.com and put an auto-fwd from old too new account. It has something to do with the single sign on code as SVuxen mentions above but I couldnt get all my mac devices working on it so found it easier to change to new account....
I went into an Apple shop to discuss with them as my partner was having hte same issue (we were buying anouther ipad) and they couldnt help much either.....so I gave up a did the same with her account and fortunately everything has migrsted across without any problems (including contacts/calaenders etc) -
If I have an IPad mini and my wife has an IPad, can I connect to her IPad with FaceTime from my IPad Mini? Are multiple Apple ID's required? One for each device/person?
Using FaceTime http://support.apple.com/kb/ht4319
Troubleshooting FaceTime http://support.apple.com/kb/TS3367
The Complete Guide to FaceTime + iMessage: Setup, Use, and Troubleshooting
http://tinyurl.com/a7odey8
Troubleshooting FaceTime and iMessage activation
http://support.apple.com/kb/TS4268
Using FaceTime and iMessage behind a firewall
http://support.apple.com/kb/HT4245
iOS: About Messages
http://support.apple.com/kb/HT3529
Set up iMessage
http://www.apple.com/ca/ios/messages/
Troubleshooting Messages
http://support.apple.com/kb/TS2755
Setting Up Multiple iOS Devices for iMessage and Facetime
http://macmost.com/setting-up-multiple-ios-devices-for-messages-and-facetime.htm l
FaceTime and iMessage not accepting Apple ID password
http://www.ilounge.com/index.php/articles/comments/facetime-and-imessage-not-acc epting-apple-id-password/
Unable to use FaceTime and iMessage with my apple ID
https://discussions.apple.com/thread/4649373?tstart=90
For non-Apple devices, check out the TextFree app https://itunes.apple.com/us/app/text-free-textfree-sms-real/id399355755?mt=8
Cheers, Tom -
How can I connect my iTunes account with PayPal?
How can I connect my iTunes account with PayPal?
In the payment method page (I access it by iTunes for Mac) there's no PayPal button!
PS: I live in ItalyWhat do you mean by sync your iTunes account?
-
Can I connect to the internet with an Ipad in Santo Domingo, DR while I'm on vacation?
Can I connect to the internet with an Ipad in Santo Domingo, DR while I'm on vacation?
Lots of hotels in the DR have WiFi. And there is plenty of cellular coverage in Santo Domingo (and elsewhere).
One thing to be careful of, the WiFi networks are usually not secured and are very vulnerable to people "listening" for passwords and user names, so don't do any financial transactions online and perhaps consider setting up some temporary passwords for the trip and changing them when you get home.
-dan -
How can I connect my powerbook (a1502) with my old monitor (a1081).
How can I connect my powerbook (a1502) with my old monitor (a1081). Which adaptor do I need?
You may want to ask on the PowerBook forum -> PowerBook. This is the MacBook Pro forum.
Clinton
MacBook Pro (15-inch Late 2011), OS X Mavericks 10.9.5, 16GB Crucial RAM, Crucial M500 960GB SSD, 27” Apple Thunderbolt Display -
Can I connect the iphone 3gs with ipad 2?
Hallo
can I connect the iphone 3gs with ipad 2?You can connect it to use the iPhone as a personal hotspot for the iPad, or to transfer photos/videos via the camera connection kit. You can't connect them in order to transfer music, documents etc.
-
I can't connect to iTunes store with my PC? help please
Hi, I can't connect to iTunes store with my PC this been since I done an update last week, I have tried on 2 networks and both the same. (my son can connect on his iTunes account with no problem).
Your advice would be appreciated
Thanks
LindsayCan't connect to the iTunes Store
-
I bought a printer Polaroid POGO, MINI PRINTER. I can not connect it via Bluetooth with my iPhone 4. Is there an app to solve this problem, because I'm Judicial Medical Expert, and I need this tool for quick things. grateful
Max Cavichini
Medical Legal Expert
Problem ipad and i phoneThis has never been a feature of iphone,ipod touch or ipad.
-
i can not connect my i phon with my pc it shows athorised computer when i am trying to do authorised process the process done but again i connect my phon again show this errore please help me to solve my prob....
I have clicked on the connect button, but it brings up the same There is a problem connecting, and I have also tried SMB://
i tried pinging the ip address with in termial and it times out.
From my windows PC and I can access my MacBook Air just fine, -
Can i connect my time capsule with my router as a bridge ?
can i connect my time capsule with my router as a bridge ?
I am a bit lost .. did you work this out?? You are running a second thread.. and answered it with this question.
The TC can be bridged.. plug it into the main router by ethernet and run it in bridge mode.. that is router bridge.
Do you mean wireless bridge??
If you mean wireless bridge the answer is maybe but unlikely.
If you setup the TC to join a wireless network.. it becomes a dumb client not a bridge.
So to get it to wireless bridge you need to use another apple router.. that is the only way to get them to work.
If you want specifics ask specific questions. -
Can't connect to ftp servers with Passive Mode
Hello,
I can't connect to ftp servers with Passive Mode.
I have Linksys WRT54GL.
Msg i have:
[R] 200 PORT Command successful.
[R] LIST -al
[R] 150 Opening ASCII mode data connection for /bin/ls.
[R] 426 Data connection closed, transfer aborted.
[R] List Error
and:
[R] 200 Type set to A.
[R] MODE Z
[R] 200 MODE Z ok.
[R] PASV
[R] 227 Entering Passive Mode (*,*,114,11,8,147)
[R] Opening data connection IP: *.*.114.11 PORT: 2195
[R] Data Socket Error: Connection timed out
[R] List Error
Thanks for the help !Maybe you need to do Port Forwarding on your router...Check for the Port Numbers for your FTP Server...
-
How can I connect NetBeans 6.1 with SQL Server 2005?
Hello guys...
how can i connect NetBeans 6.1 with SQL Server 2005?
there is no SQL Server in Server list when we create a new Web Project and choose Server.
I'm new to NetBeans and this is my first time of posting.
If has some errors and unwanted disturbing,pls understand me. Thanks.
(If you have references or some snippets, i'll be glad if u can share.)
scsfdevThe JDBC-ODBC bridge wasn't recognizing any of the primary keys I had set up in SQL Server. After lots of head banging, here's the solution I came up with:
1. Download the appropriate driver. SQL Server 2000 requires the SQL Server 2000 JDBC driver (http://www.microsoft.com/downloads/details.aspx?FamilyId=07287B11-0502-461A-B138-2AA54BFDC03A&displaylang=en).
SQL Server 2005 download: (http://www.microsoft.com/downloads/details.aspx?familyid=C47053EB-3B64-4794-950D-81E1EC91C1BA&displaylang=en)
3. After installing, right-click on "Libraries" in your project, and choose "Add Library...". Next, give it a name (i.e. SQLServer2000), and select "Class Libraries".
4. On the next screen, find the JAR files (should be in C:\Program Files\Microsoft SQL Server 2000 Driver for JDBC\lib\), and add them under the "Classpath" tab. It will now be available under "Libraries" for future projects.
5. You can now create a connection to a specific database under the "Services" tab (next to "Projects" and "Files" in the top left of the screen). Select "Microsoft Sql Server 2000 (Microsoft Driver)" and format the "Database URL" like this:
jdbc:microsoft:sqlserver//YOURSERVER:1433;DatabaseName=YOURDATABASE
1433 is the default port, though your DBA may have changed it.
I posted a simpler version of this on the NetBeans.org FAQ page - they had the following title with no content on the answer page:
"Cannot Select Tables From MsSql 2000 Because It Says No Primary Key Next To Each Table But The Tables DO Have A Primary Key. What Do I Do?" -
Can I connect a SCXI 1000 with PCI 6025 ?
Can I connect a SCXI 1000 with PCI 6025 and use Virtual Banch with PCI 6025 ?
Bley,
Yes, you can use your PCI-6025E and SCXI-1000 with Virtual Bench. Do you have a more specific concern? Have you tried this setup, and it is not working?
Spencer S. -
How can i connect my iphone 4 with my ipad retina by bluetooth???
how can i connect my iphone 4 with my ipad retina by bluetooth???
iOS: Understanding Personal Hotspot
http://support.apple.com/kb/HT4517
Use Bluetooth to tether your iPhone, iPod touch, or iPad
http://www.macworld.com/article/1159258/bluetooth_tethering.html
How to Connect an iPad to an iPhone Via Bluetooth Tethering
http://techtips.salon.com/connect-ipad-iphone-via-bluetooth-tethering-25472.html
Tethering an iPad to an Android Cell Phone
http://everydaylife.globalpost.com/tethering-ipad-android-cell-phone-33675.html
How to Reconnect a Forgotten Bluetooth Device on an iPad
http://techchannel.radioshack.com/reconnect-forgotten-bluetooth-device-ipad-1037 .html
Cheers, Tom
Maybe you are looking for
-
IPod fifth gen. not charging neither connecting to computer
Hi, I have an iPod 5th generation 30gb and it isn't recognized by my computer. It isn't charged. iPod 5th gen. 30gb black Windows XP
-
How to clear accounting document for returns
Hi Experts, We processed a sales return and now we need to clear the accounting document generated by the Credit memo, how can I do that? Also, how can I close the Returns document?
-
title say it all, cheers
-
Online application web forms (steps and how to)
hello guys. i hope to get there soon. but so far i still need you help. and thanks again here it is. as part of a MIS technician group i am assigned to take care of online application form to get the paper work out of commision. the problem is how to
-
Request is in green, but in the monitor it says "Not yet Completed/warning"
When I go to the manage screen of ODS I see green in "Request Status". If I go the Monitor and details couple of data packages are still in Yellow color. Over all it says Not yet Completed/warnings with yellow indicator.. What it means?