Can we connect Multisim and LabVIEW?

Hi frndz
I want some info. please tell me is there any such facility in LabVIEW2011 that i can use circuit from Multisim as a simple camponant in LabVIEW???
take 1 example :
suppose i m doing HOME AUTOMATION project. in that i have my own temp. sensor circuit , light detector circuit. i made these circuits in Multisim.
now i want to use that circuit as a single block in LabVIEW???
can we connect Multisim and LabVIEW?

Hi,
I believe what you are looking for is Multisim connectivity toolkit.
This should help : http://zone.ni.com/devzone/cda/tut/p/id/7785
Sahil

Similar Messages

Can i connect imac and macbook by usb?

can i connect imac and macbook pro by using USB clable? i just want pass my files and music from macbook to imac.
thank you

You can't connect both computers by USB. The easiest way is to connect them using a FireWire cable (if your iMac and your MacBook Pro have got FireWire ports), and put your MacBook in target disk mode (start your MacBook holding the T key).
Doing this, the iMac will detect the MacBook's hard disk as an external disk, so you can easily access to your files from Finder and copy the data you want to the iMac's hard disk

Why I can not connect ipad2 and iphone5 to wifi by using d-link modle? but my computer and iphone3 can do it.

why I can not connect ipad2 and iphone5 to wifi by using d-link modle? but my computer and iphone3g can do it.

iOS 6 Wifi Problems/Fixes
Fix For iOS 6 WiFi Problems?
http://tabletcrunch.com/2012/09/27/fix-ios-6-wifi-problems/
Did iOS 6 Screw Your Wi-Fi? Here’s How to Fix It
http://gizmodo.com/5944761/does-ios-6-have-a-wi+fi-bug
How To Fix Wi-Fi Connectivity Issue After Upgrading To iOS 6
http://www.iphonehacks.com/2012/09/fix-wi-fi-connectivity-issue-after-upgrading- to-ios-6.html
iOS 6 iPad 3 wi-fi "connection fix" for netgear router
http://www.youtube.com/watch?v=XsWS4ha-dn0
Apple's iOS 6 Wi-Fi problems
http://www.zdnet.com/apples-ios-6-wi-fi-problems-linger-on-7000004799/
~~~~~~~~~~~~~~~~~~~~~~~
Look at iOS Troubleshooting Wi-Fi networks and connections http://support.apple.com/kb/TS1398
iPad: Issues connecting to Wi-Fi networks http://support.apple.com/kb/ts3304
WiFi Connecting/Troubleshooting
http://www.apple.com/support/ipad/wifi/
iOS: Recommended settings for Wi-Fi routers and access points http://support.apple.com/kb/HT4199
Additional things to try.
Try this first. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
Another thing to try - Go into your router security settings and change from WEP to WPA with AES.
How to Quickly Fix iPad 3 Wi-Fi Reception Problems
http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
If none of the above suggestions work, look at this link.
iPad Wi-Fi Problems: Comprehensive List of Fixes
http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
Fix iPad Wifi Connection and Signal Issues http://www.youtube.com/watch?v=uwWtIG5jUxE
Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
Unable to Connect After iOS Update - saw this solution on another post.
https://discussions.apple.com/thread/4010130
Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
~~~~~~~~~~~~~~~
If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
 Cheers, Tom

HT3986 After installed win7 on my mac pro(mid 2012/mountain lion), I can not connect internet and where can i find drivers in mountain lion system

After installed win7 on my mac pro(mid 2012/mountain lion), I can not connect internet and where can i find drivers in mountain lion system.
I donot think I have a install disk when I bought my mac, there is only a disc partition for recovery system.

Welcome to the Apple Support Communities
You have to install Boot Camp drivers. On Mountain Lion, you have to download them.
First, press X key while your Mac is starting to start into OS X. Then, open Boot Camp Assistant and select the option to download the drivers. You will have to burn them into a DVD or USB drive, so after downloading them, restart and install them into Windows

Can't connect 3DS and android devices to HomeHub 3

Ok, devices that won't connect are:
Nintendo 3DS
Advent Vega Android Tablet
Orange San Francisco Android Phone
My 3DS connected when I first bought it. but now I can't connect to the homehub at all, when I scan for wireless networks, where the Homehub should be, it just shows an empty router, doesn't show the SSID or security type.
With the two android devices, they show the SSID ok, but they don't recognise the security type, they show the network as open (when it actually has WPA2 encryption) - thus it doesn't give me anywhere to put in the passphrase
Anyone else had any trouble with these and know of any fixes?

sometimes interference from other wifi devices around your area can cause this...HH3 is normally on auto search for the best channel on wifi,and pressing the wifi button or reseting can resolve the problem,glad you have sorted it
Q. There is smoke coming out of my open reach box... so can I have a new one.
A. Sorry sir, The fault is showing at the exchange so your box should be ok.
BRING BACK UK CALL CENTRES!!!!!

Can't Connect MacBook and MacBook Pro at same time to AEBS

I can't connect a MacBook and MacBook Pro to an Airport Extreme Base Station at the same time. Whichever one connects first works and the other one doesn't. It was working fine for months and then stopped working. Can only use one computer at at time. There's nothing else on the network. It may have been a software update that caused the problem, but I'm not sure which one. Have done all software updates and am not using any security on the network, so that's not the problem. Many sleepless nights trying to get this fixed, so any help would be greatly appreciated!

bcassid
Do me a favor. So many users are experiencing this (no myself though) and I have suggested so many things with nothing constantly working. There are successes here and there, but nothing consistently solves the problem. However, try the following in Airport Utility and both Macs, and then let us know what happens.
*Can’t Access Certain Web Sites / DNS Server Settings Issues*
I'm wondering if either or both Airport Utility & Network Prefs have proper DNS server settings. Try this
Launch Airport Utility.
Select TC on left.
Click "Manual Setup".
Select "Internet" from the toolbar above.
What's listed for "DNS Server(s):"?
Try putting in these servers from OpenDNS
208.67.222.222
208.67.220.220
Click "Update".
Your TC will restart with the new settings.
Next, launch System Prefs --> Network Prefs.
Select the service you usually connect with on the left (Airport or Ethernet).
Then click, "Advance..."
Click the "DNS" tab.
What's listed for "DNS Server(s):"?
Usually "10.0.1.1" will be listed first in gray. This refers back to the settings in the Airport Utility.
Nevertheless, it doesn't hurt to add the DNS servers noted above here as well.
Click "OK" then click "Apply".
Finally, reboot your Mac.
Now see if you have internet access all around.
Let us know if this resolves your issue.
Cheers!

Enterprise connectivity toolkit and LabVIEW 8

Hi All,
Does anyone know whether the Enterprise Connectivity Toolkit is available for LabVIEW 8.0? Trying to put together a proposal and I'm not sure, looking at the web site. It is sometimes difficult doing business at one of these inflection points when the new version of LabVIEW is shipping (and all that my end users can purchase) but all the nifty tools for it aren't available yet.
Thanks all,
P.M.
Putnam
Certified LabVIEW Developer
Senior Test Engineer
Currently using LV 6.1-LabVIEW 2012, RT8.5
LabVIEW Champion

Thanks for the information. Thats why I was all cranky about not getting my CD's until recently (last weekend). I hadn't had a chance to look at them and am out of my office at the moment. Guess I'll look at them this evening. What is envolved with getting/doing the update?
P.M.
Putnam
Certified LabVIEW Developer
Senior Test Engineer
Currently using LV 6.1-LabVIEW 2012, RT8.5
LabVIEW Champion

Can't connect PC and Mac to print via wireless network

I have the HP Office Jet All-In-One 6500. I've never been able to get both my Mac and PC to print wirelessly.
First, Mac worked fine wirelessly, then had to print via ethernet for PC. Then that quit working for PC. So I uninstalled printer drivers on PC, reinstalled and it works great printing via the network.
However, now my Mac -- my main computer -- wont print. It spends hours "connecting....." MacBook running Leopard OS 10.5.8.
Why can't both computers access this printer over the same wireless network? Absolutely NO settings were changed on my Mac from the time it worked, until now. Only thing I did was get the PC to work.
I've tried turning the printer off and restarting.... didn't help.
I bought this wireless printer so that both computers could use 1 printer.... I don't want to have 2 printers for my little office! Please help HP!

First, please look on the label underneath the router and let us know the exact model and hardware version of the router. Also check which firmware you are running on the router at http://192.168.1.1/ and verify that you are actually running the most current firmware. You can find out which is the newest firmware on the downloads page of the linksys website.
Second, is it possible that you used the Mac before to connect directly to the internet without the router? In that case it could well be possible that the Mac is still doing so, connecting to the internet itself, bypassing the router and thus terminating whatever internet connection the router established before (which the PCs were using).
Third, after being kicked out, please check the following in a command prompt window on the PCs ("Run..." and enter "cmd"). "ping 192.168.1.1" you should still get replies.
Fourth, what is the IP address and gateway address which the Mac gets when getting online?

Can you connect iPhone and iPad to iTunes at same time?

Just received my new iPad2 and it will not show up in iTunes. I have my iPhone connected for a long time, but even if I disconnect it the iPad does not show up.
Any Ideas?

What if you manually quit iTunes?
I can see why iTunes would not want you to try to sync two devices at the same time, but I don't see why both can't be attached. I guess that's just how they designed it. Probabaly makes sense. But if you quit out of iTunes (and iPhoto if that's running too), then I bet both devices would take a charge at the same time.
By the way, I set my iPhone and iPad to NOT sync automatically - so they don't cause iTunes to launch when attached.

IOS 8.1.3 can't connect Blue and Me media player on Alfa Romeo Mito

Hi all,
I am using a iPhone 5s 64GB, It was fatalistic using it on my Alfa Romeo Mito, I can play music from my music library or online, like Spotify.
Since I upgrade to iOS 8.1.3 it just stopped working, and I tried my friend's iPhone 5 with iOS 8.1.2 it works fine.
Hope some one can help.
Thanks!

Hello JackinCanaryWharf,
If can see the frustration with not having the connection with your iPhone, especially if another phone can pair and yours does not. I would start with using the article below to start troubleshooting the issue further. You may need to forget the connection and reset it up.
iOS: Troubleshooting Bluetooth connections
http://support.apple.com/en-us/TS4562
Regards,
-Norm G.

Hi,mike,is cirrus down again? I can't connect now.and I have more then 10000 connection

What am I supposed to do?

developer keys can be obtained for free by anyone. there is no incentive to steal a developer key from an existing application, except to abuse it and cause a disruption to the service or for the legitimate developer to be blocked.
unfortunately the connections (in this case) are coming from hundreds of thousands of different end-users. there is no one (or small number) of IP addresses to block, unless i was somehow able to block (in this case) "all of China", which would also block lots of other legitimate applications.
in this case it doesn't look like the developer key has been taken by a hacker. it looks like an application developer deployed an application that makes connections to the service from popular web pages, where the application mostly doesn't need the connection and where the end-users are connecting very rapidly. very few P2P operations appeared to happen with this application (when it was not blocked) even though there were hundreds-of-thousands of concurrent connections. the average duration of the connection to Cirrus in this application is less than 3 minutes.

How can I connect left and right RCA audio jacks to my iMac to record?

I would like to connect my Tascam 8-track digital recorder to the iMac. The Tascam stereo output is L/R RCA jacks. Is there a chord that is Stereo L/R RCA male jacks on one end and a USB or Thunderbolt jack on the other side?
Thanks much,
John

NYCteacherR wrote:
I'm new to this this forum and new to Apple Computers. I hope you don't work for Apple as a moderator, because your attitude is sarcastic and unhelpful.
So, I'll tell you what, don't bother responding to any of my posts in the future.
None of us are moderators -- they seldom post anything but when they do you will know it because they have special avatars nobody else can use. As for the "unhelpful" remark, please read the "How to write a good question" info that appears on the page where you type the summary of your question. That explains the importance of including details in your summary -- without them we have no way of knowing what might be helpful & what would just waste our time & yours, or even cause you needless expense or problems with your Mac.
Also, please be aware that even though you asked the question, in the future other users looking for similar answers may read this discussion, so by providing enough info for anyone to tell if what is discussed here is relevant to them, you can help other users too.

How can I connect HDTV and LCD monitor to PC using both -as a double monitor.

I recently purchased HP Pavilion PC a6600f with HP w1707 monitor. I also purchased a DVI to HDMI cable to hook PC to Samsung HDTV. I can use the VGA cable to hook to the monitor and the DVI to HDMI cable to hook to the HDTV but have to unplug one to use the other. Is there any way to configure Windows Vista Home Premium to show on both screens at same time or at least be able to switch between the two without having to unplug one and restart computer?
This question was solved.
View Solution.

I believe you have to press Source or the Mode button to switch between video inputs on your monitor.

I have just updated my Mac but can't connect iPhone and Ipad

Why cant I connect my iPhone and Ipad to my mac via bluetooth??

This worked for me:
1 Go to the finder menu bar at the top of the screen
2Click go
3 click applications
4 go down to iTunes and right click on Show Package Contents
5 open contents folder then go to mac os folder
6 open the terminal marked iTunes in that folder
This should force it to open and function enough, it will not allow importing of music from a desk top

Can't Connect ASDM and Console Forces User Name: & Password: Prompts

After pulling a brand new ASA 5515 out of the box this morning, I spent countless hours scratching my head wondering why:
1. I cannot establish an HTTPS connection to the Management port - https://192.168.1.1/admin
2. When connecting via the console port I get prompted with a username and password sequence that I don't know
I get an SSL Version Error message when I try to connect with any browser. although I did find a way to resolve it, it requires a console port connection which is not working either.
This is not my typical experience with the console or ASDM port setup. What is going on? Any help from anyone would be so appreciated.
Thank you,
Richard

Hmm,
To my understanding Console connection on a fresh unit shouldnt ask for a username and it shouldnt even have an enable password (should be able to leave it blank and press enter). Or atleast that is how I remember it.
I am not sure if the new ASA5500-X models are different.
I think on when using ssh (or was it telnet) without username configured required you to use username pix and password cisco to log in.
- Jouni

Can we connect Multisim and LabVIEW?

Similar Messages

Maybe you are looking for