Can we connect the ER-8 to a SC-2040 using one of the 50-pin connections on the ER-8 with the J11 connector on the SC-2040?
We have an ER-8 with two 50-pin connections. One is for DIO-24 devices, one is for DIO-32 devices and we do not know which to use to connect to the SC-2040, or if we even can. Additionally, our DAQ is a PCI-MIO16-E-1 and we are currently using 14 channels for data acquistion. Is there room to run 4 channels of our ER-8? If not, can we run the 4 channels off of one input effectively making them one switch?
To connect the SC-2040 and the ER-8 to the PCI-MIO-16E-1 you will need to use a SC-2050.
You will connect the PCI-MIO-16E-1 to the SC-2050 J1 connector with an SH-6850 cable. Then use the J2 connector on the SC-2050 to connect to the SC-2040 and the digital connector to connect to the ER-8.
Similar Messages
-
Can I connect an external hard drive, with a FireWire connector to AirPort Extreme?
I am considering getting AirPort Extreme. I need to be able to connect an external hard drive with a firewire connection. Can it be done?
Sorry, but no.
-
how can i connect my mac book pro with retina display 2014 Mid to 5.1 channel? what is the connector am i to use? i wonder if anybody could probably let me know?
https://www.youtube.com/watch?v=72l_FLsXNAg
I use Hercules found here http://www.hercules.com/us/Sound-Cards/bdd/p/123/gamesurround-muse-xl-pocket-lt3 /
also read this helpful thread Outputting 5.1 Channel Surround Sound from your Mac -
I'd like to know how can i connect my old iMac tiger with new one iMac lion. I wanna use the old one for external disk to collect files from there to new one.
Hi mshields1162,
Great question, and welcome to Apple Support Communities.
First, you may want to choose to have the sidebar displayed for familiarity:
iTunes 11: Frequently used features
http://support.apple.com/kb/HT5649
Afterwards, your device should be displayed if connected:
We'll want to click on it, and choose the Music tab at the top. Let's make sure "Sync Music" is checked:
Afterwards, you'll have the option to sync either the entire music library (for your first iPod), or "Selected playlists, artists, albums, and genres" (for the secondary device). Upon selecting this option, four larger option boxes will appear allowing you to pick and choose what content will be synced. For audiobooks, you may need to do the above in the "Books" section. For a visual instruction on how to do this, see the following:
iTunes 10: Sync to your iPod
http://support.apple.com/kb/VI72
Thanks,
Matt M. -
I can't connect anymore on Game Center with my account on the Ipod Touch of my girlfriend, I sign in then it ask me the password of my girlfriend's account and automaticaly log me on her account... What can I do?
Is the camera damaged? Could be a hardware problem.
Try:
Close the Camera app in the multitasking bar, then try again.
Restart/Reset/Restore your iPod. In that order. -
How can I connect my 3gen apple tv with HDMI to my BUSH LCD32TV022HD
This does not have an HDMI port but does have:-
1) S-Video I/P,
2) Video I/P,
3) Audio Input (Left & Right)
4) Audio In jack (for VGA and DVI source)
5) DVI input
6) VGA inputWelcome to the Apple community.
The Apple TV doesn't officially support a DVI connection, however you may be able to get it to work. You will first need to check that your TV supports either 720p or 1080p as well as HDCP. If you are able to get the video working over the DVI connection, you may also require a DAC in order to connect with Apple TV's optical audio output to the TVs audio imput.
You may well wish to make sure that the DVI connection works before spending any money on a DAC.. -
Can't connect macbook pro to internet with airport extreme
Can't connect macbook pro to internet with airport extreme
If you have ethernet still on your MBP plug it in by ethernet and tell me if that works.
Tell me how the Airport is setup.. what broadband modem and router you have.
What OS on the laptop? Yosemite I guess.. since it is the most troublesome.
Did it work before whatever change was made? Has it worked in the past? When did it stop and what did you do that coincided with it stopping?
Upgrade to Yosemite?? -
I can't connect to ad-hoc networks with my iPod touch 4g AND IT ****** ME OFF!! (running firmware 6.1.2) Please fix this extremely annoying issue ASAP!!
Try:
- Powering off and then back on your router.
- Anything else here
iTunes for Windows: iTunes cannot contact the iPhone, iPad, or iPod software update server
- Change the DNS to either Google's or Open DNS servers
Public DNS — Google Developers
OpenDNS IP Addresses
- Try on another computer/network
- Wait if it is an Apple problem -
How can I connect Bluetooth in iPad retina with non apple devices ?
How can I connect Bluetooth in iPad retina with non apple devices ?
What devices?
The iPad can only pair with earphones, speakers and keyboards.
It cannot directly pair with other phones or computers for file transfer or other operations.
Most Bluetooth devices will have a user guide to connect them to other devices. follow that to start the process.
From the iPad side, its just a matter of going inot Settings->BlueTooth turning it on, and searching for the device to pair. -
my iphone's screen was smashed resulting in not able to unlock passcode and now i can't connect to itunes to synced with my divice before sending in for repair. what can i do
Sorry, there is nothing you can do.
FYI: Damage like that is not covered by warranty, & all Apple will offer you is an out of warranty replacement...cost, in the US, for an iPhone 4, is US $149. -
Can I connect a MKP min AKAi with my Ipad mini retina ?
Can I connect a MKP min AKAi with my Ipad mini retina ?
Are you using a powered USB hub as recommended by the unit's manufacturers?
http://www.noterepeat.com/products/akai-professional/mpd-and-mpk-series/39-conne cting-usb-audio-interfaces-midi-controllers-and-keyboards-to-the-ipad -
Can't connect my new iPhone 4 with internet via Time Capsule. IP4 recognized TC but will not connect with it. (Password etc. is ok)
Do the usual wireless things.
Change the wireless name to simple name with only alphanumerics and no spaces.
Set to manual and use channels 1, 6, 11 in turn.
For testing take off the security altogether.
The iphone only works on 2.4ghz so only that band is relevant. -
Using calendar in OS X Mavericks. When it tries to connect to iCloud it gives me VERY annoying pop-up message, that it can't connect and that server responds with CalDAVAddSubscriptionCalendarQueueableOperation: 400.
Help me please, really need my calendar!Hello Steve
The simple and quick fix is right-clicking on that little Safe icon in the system tray (near the system clock) and choose Stop Backup/Synchronization. Do you see that icon?
Turn it on and off as needed. Did this work for you?
Scott -
Can I connect my apple bluetooth keyboard with a Playstation 4
can I connect my apple bluetooth keyboard with a Playstation 4
Check the specifications of the third party device.
Barry -
Can I authorize my boyfriend's itunes or iphone to use one of the apps that I purchased?
Stormy25 wrote:
So if I log onto my itunes using his phone I can download the app to his phone?
That's called "stealing", plain & simple, same as if you stole something from a store. Sorry, but what you want to do is not permitted under the SLA & you won't get any help here...Apple owns/runs this forum. -
At home, I can connect my iPhone 5 to my home wifi network with no problems, as long as I stay downstairs.
As soon as I go upstairs my phone disconnects from the network. I can still see the home network it in the available network lists (with full signal strength), but when I try to reconnect I get an 'unable to connect to the network message'
If I move back downstairs it reconnects
This has only started happening in the past week or so
I've tried to forget and rejoin the network, but this doesn't work
I reset my network settings on the phone. This worked for a couple of hours and I could connect to the wifi upstairs, but now it won't connect again.
Does anyone have any ideas what is causing this?Sounds like your wi-fi signal strength has degraded. Try rebooting your wi-fi router, or get it serviced.
Do you have similar issues with any other wi-fi routers?
Maybe you are looking for
-
Is this BUG or Feature of APEX 4.0.1 - Any expert please help to answer
Try this to stimulate the BUG or Feature - Development - 1. Create Basic Master Detail with tabular form 2. Create a basic LOV and display NULL -> RETURN NULL - Run - 1. Run the Page click "ADD ROW" 2. Do not enter any data into the tabular 3. Click
-
Remove ?xml version="1.0" encoding="UTF-8"? from XML doc
I have generated an XML file using javax XML transformer. In the XML file thats generated I have the version and the encoding line <?xml version="1.0" encoding="UTF-8"?> which is automatically generated in my XML file. Is there any way that I can avo
-
Ipad using home wifi got disconected
I have a Ipad IOS 4.3.5 (8L1) and it has worked in WIFI without any problem for 7 months. I have a DLINK router with WEP password. I have full WIFI signal, but more often and randomly Safari and Mail do not work: not able to connect to internet. Some
-
Dear All When I try to launch a Leave Request Work Item in UWL ,its throwing me an exception as given below : <b>Portal Runtime Error An exception occurred while processing a request for : iView : pcd:portal_content/every_user/general/uwl/com.sap.n
-
Hi Gurus, Our client have PI (formerly XI) and have multiple source systems. Client is pushing data from PI to ECC. Now my task is to extract the data in BI system and the source is non SAP (RDBMS). I know that I can use DB connect to extract the dat