Can we connect to any SAP system if we have connection details.

Hi Experts,
Can we connect to any SAP system if we have connection details.
In this thread I found Diego Lombardini asking connection details.
Needed help on this report
I am working in ABAP for couple of years but donu2019t have much idea about connection to SAP system, Please let me know how it is possible .
High points will be rewarded for any helpful answer.
Regards
Bikas

Hi Bikas,
  That reply is just because Diego got irritated by Ravi asking the same question in many threads many times .
Otherwise if a SAP server is not secureed using secureclient you can always connect to that SAP system using the internet and your own SAP GUI ( perhaps based on the GUI compatibility )
But i bet, nobody will reveal SAP server as open for you.
Cheers
Kothand

Similar Messages

  • Connection to remote SAP system.

    Hi All,
    I want help in getting connected to a remote SAP System from my desktop. I am working in SAP NetWeaver developer studio.
    Regards,
    James

    Hi James,
    Although the info. provided by you does not provide much information about the setup of your SAP System, but you can try this out:
    Inorder to get connected to the SAP system via your SAP NWDS(SAP NetWeaver developer studio).
    1) Please check if you are able to get connected to the remote server, incase the server is on a different machine. You can do it by following the steps below:
    Click on Windows Start menu -> click on Run -> Typein "cmd" and click on Ok button -> Typein "Ping 'IP address of the remote server'", I mean your remote server machine's IP address(Ex:10.6.52.189 or whatever it is). If it responds then please carry out the following steps in NWDS.
    2) Please GoTo :
    NWDS menu - > Window -> Preferences -> SAP J2EE Engine(Choose this on the left menu).
    Now, if your server is not installed on the same machine on which you are working then go for the first radio button which says "SAP J2EE engine is installed on remote host" and enter the server's IP(Internet Protocol) address(Ex: 10.6.52.14, etc)in "Message Server Host" and enter 3601 in "Message Server Port".
    Click on apply and Ok.
    3) Now again Click on Windows Start menu -> click on Run -> Typein "drivers" and click on Ok button -> Open the folder "etc" -> look for file "Hosts", openwith notepad
    -> Now typein the IP address and the corresponding host name(of the remote server)please note that the IP address and the host name should be separated by at least one space, preferably a tab space. -> save the hosts file.
    Now you should be able to connect to your remote server.
    Regards,
    Sudeep

  • RFC connection between two SAP systems (with SAP router)

    Hi!
    I would like to set up a RFC-connection from SAP Solution Manager to other SAP system.
    The network connection between the servers is VPN.
    How can I set up this RFC-connection, if my connection between two SAP systems looks as follows,
    (I use the following SAP routers)?
    my server  --> customer
    my server --> internal SAP Router server xy (10.101....) --> SAP Router customer 2 (10.1....) --> SAP System customer (134....)
    Back-way
    SAP Systeme customer --> SAP Router customer (134.1....) --> internal SAP router (212.6....) --> my server
    How can I set up this RFC-connection, if my connection between two SAP systems looks as follows,
    (I use the following SAP routers)?
    something like:
    /H/10.101..../S/sapdp99/H/10.1.4..../S/sapdp99/H/134...
    Thank you very much!
    regards
    Thom

    Same answer as in the other forum where you cross posted....

  • Connection between 2 SAP system

    Hi.
    I want to send and receive an IDoc between two SAP system. but i can't connected to an other syestem. i try it juste between two different mandant.
    Can some one help me.
    Thinks.
    Issam

    Hi,
    Through RFC (SM59) u can connect the TWO SAP systems.........
    If u are in SAP 4.7 , once u enter into SM59 u will be finding the R/3 Connections... U have to choose that...
    if u are in SAP ECC , then u will be finding the ABAP connections.. U need to choose that and create the RFC connection.....
    But U need to know the details :
    1. Target Host Name .
    2. System Number.
    3. Logon details...
    Reward Points if useful
    Raghunath.S
    9986076729

  • Connecting to an sap system

    Hi
    Just wanted to know if the JCO client service is the only way of connecting to an SAP system from enterprise portal.
    thanks
    Ram

    Hi Ram,
    no, it's the "old" way, the new one goes via JCA; see JCA/J2EE Connector Architecture with WAS 6.20 (R/3 Enterprise) and JCO x JCA and Java to SAP as well as the brand-new article https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/documents/a1-8-4/using j2ee connector architecture with ep6 iview development.pdf
    Hope it helps
    Detlev

  • TS2446 I had to reset my apple ID password now I can't log onto any of my apps, I have done all these steps same msg access disabled , How do I fix this...

    I had to reset my apple ID password now I can't log onto any of my apps, I have done all these steps same msg access disabled , How do I fix this...

    Hi kmkrodel,
    I apologize, I'm a bit unclear on the exact nature of the issue you are describing. If you are having issues accessing iCloud on your Mac or iPad after a change in your Apple ID password, you may find the following article helpful:
    iCloud: Account troubleshooting
    On the other hand, if you are talking about sharing files from your Mac to specific apps on your iPad via iTunes, then this article may be of more use (Note: When using this function, you will only see apps that support file sharing, not all apps on the device):
    iOS: About File Sharing
    Regards,
    - Brenden

  • Activating WebService on R/3 to connect a non-SAP system (XML)

    Hi Experts,
    Apologize if my thread is not on the right category. I'm not sure where to put this.
    Is there any steps on how to activate webService to connect to a non-SAP system without using middleware like XI/PI. I'm trying to connect to a non-SAP system that sends an xml format message and then directly connect to an R/3 system. Is this possible? thanks!

    Hi,
    Check this link.
    Web Services from Function Module
    it might help u.
    Thanks.

  • RFC Adapter to connect to Non SAP System

    Hi,
    I have a scenario to connect to a non SAP system using RFC adapter. I am not used to the same. I need to know whether this is possible and what are the steps to be done.
    Thanks and regards
    Siji

    Hi,
    These links should help.
    Non-SAP application connecting to PI via Sender RFC Adapter
    Error by setup RFC Interface with non SAP system
    SAP PI to Third Party system through RFC Connectivity ??
    Regards,
    Jannus Botha

  • U00BFHow I can register two equals SID SAP Systems?

    Hi,
    I work in a SAP VAR, I've configured service desk scenario and other scenarios, I've registered some customers SAP Systems at SAP Solution Manager,
    and all is OK. I've registered these SAP Systems using smsy transaction.
    I've created a SAP System ECC 6.0 with SID=DES, this SAP System owns to Mercury Customer, I created this SAP System using smsy transaction and all is ok.
    It's well registered at ib52 transaction. Now, I've other customer, name is Onix. Onix customer has SAP SAP System ECC 6.0 with SID=DES too.
    So, when I try create this SAP System a pop-up error appears at transaction smsy: "System already exists. Change or enhance the system name". I attached a word file with screenshot pop-up error.
    Please could you help me?
    Thanks and Reagrds
    Raul

    Hi Raul,
    Usually we follow a concept called SIDCID (SID: SID of the SAP system, CID: Customer ID), which allows unique identificaiton of systems with same SIDs.
    Hope this will help you.
    - Hari

  • Firefox cannot connect to any websites, although other browsers have no trouble doing so..

    I had a problem with a Seagate drive and they connectd remotely to my computer. Hundreds of Windows showed up as part of making the conection and FireFox crashed.
    I have since:
    * Uninstalled Firefox
    * Downloaded a new copy (it fwould not work)
    * Followed all advice I could find on the Mozilla support site including clearing all history
    Still Firefox will not connect to any website. Here is the error message I get:
    Unable to connect:
    Firefox can't establish a connection to the server at nytimes.com.
    The site could be temporarily unavailable or too busy. Try again in a few moments.
    If you are unable to load any pages, check your computer's network connection.
    If your computer or network is protected by a firewall or proxy, make sure that Firefox is permitted to access the Web.

    Firefox 6 won't settle down as the next release Firefox 7 is already planned to be released later this month.
    You shouldn't be using Firefox 5 because it doesn't have the patch to disable the DigiNotar certificates that was the reason for Firefox 6.0.2.<br />
    Using unsupported Firefox versions is at your own risk and makes you vulnerable to attacks.
    *https://support.mozilla.com/kb/deleting-diginotar-ca-cert
    *http://www.mozilla.org/security/known-vulnerabilities/firefox.html

  • Since I downloaded Firefox 6.0, I've experienced significant delays in connecting to any and all websites, generally the 'connecting' arrow spins for no less than 10 seconds..

    The time to connect to any website is infinitely faster using Safari.
    iMac 5.1 2.16 GHz Core 2 Duo, using Bank1 only; 1GB memory.
    My internet provider is xfinity/Comcast.

    Your above posted system details show outdated plugin(s) with known security and stability risks.
    *Shockwave Flash 9.0 r999
    Update the [[Managing the Flash plugin|Flash]] plugin to the latest version.
    *http://www.adobe.com/software/flash/about/
    In Firefox 3.6 and later versions you need the Next-Generation Java™ Plug-In present in Java 6 U10 and later (Linux: libnpjp2.so; Windows: npjp2.dll).
    http://java.com/en/download/faq/firefox_newplugin.xml
    See also http://java.sun.com/javase/6/webnotes/install/jre/manual-plugin-install-linux.html

  • HT5569 Several of my apps say that I have no internet connection, and they wont work, but I have connection.

    I have tried using several apps.  I get a message, please be sure you are connected to the internet to use this feature.  My phone is connected to wifi.  Other apps just read "No network connection" What can I do?

    Any time you change networking hardware it is always a good idea to perform a complete power recycle. Check out the following AirPort User Tip for how. Please post back your results.

  • HTTP/S connection to the SAP System failed

    Dear SDN,
    I am trying to connect my EP System (Enterprise Portal 6.0 SP 15) to MMSCMDEV System(SCM 4.0 Development System).
    Please note SCM 4.0 has external ITS on server MMLCADEV (both are in same network). EP is in different domain.
    User Mapping has been done while making the system connection.
    1. Ttransaction service test is successful to MMSCMDEV from EP (System Administration->Support->Support Desk->SAP Application->Test and Configuration Tools->Transaction with parameters "service - transaction; tcode - /sapapo/ac04; SAP GUI Type - SAP GUI for Windows").
    2. While uploading transaction using Role Upload, I m not able to view any transaction and get the error as : System connection failed.
    3. System Connection Tests to ITS & WAS fails with error: HTTP/S connection test failed.
    The SAPGUI HTML is available thru ITS.
    Please help me resolve issue.

    Well I just tried to create the SAP Transaction Iview, putting the tcode I need.
    I am able to see them properly , both in  Wingui as well as webgui.
    I used a test role and attached it to my user Id and another test id (this exists in both systems and user mapping is done for it.)
    I am able to see the iviews working from my Id , but in the test id : it gives an error as : Portal Runtime Error
    An exception occurred while processing a request for :
    iView : N/A
    Component Name : N/A
    Unable to lookup System 'MMSCMTST'. Please check the system object and the alias..
    See the details for the exception ID in the log file
    and : com.sap.portal.appintegrator.sap.Transaction::Transaction/WebGuiSSOLayer
    Can somebody tell me why this should have happened ?
    Regards,
    Chandani

  • My 4th generation iPod touch (reset today) is unable to connect to any VPN systems. Does anyone know how to fix this? Thanks

    Didn't realise there would be a question box as well as title and it would take ages to write out again, so...
    Does anybody know what to do when an iPod refuses to connect to VPN?
    Thanks

    Thanks for the response,
    I have tried 3 vpns so far, hotspot shield, spot flux and onavo extend.
    All 3 can be downloaded and installed as I can surf the Internet fine.
    The problem occurs when trying to install the profile to run the VPN. The certificate shows as authenticated so I add profile, and in the VPN settings tab I can see the current VPN profile, but swiping the VPN swiper to on results in a  spinning wheel for a period and then it gives up and VPN returns to off.
    For the record, hotspot shield works fine on my mac computer.

  • My Firefox 8 for Mac no longer will launch properly. It opens, and immediately hangs before loading the home page and connecting to any website. Does anyone have any ideas about how to correct this? Thanks!

    All I get is a blank home page, along with a spinning beach ball. I cannot open the preferences to try to clear the cache, and must force quit to get out of Firefox. I have tried clearing the cache from the Library, and trashed the preferences file. I uninstalled the application, and reinstalled a newly downloaded application. I have restarted the computer many times, and run the disk utility to repair permissions. Nothing has worked. I have not added or upgraded anything on my computer since Firefox was working just a few days ago. Safari works fine connecting to the web. I have read through most of the support documents at Firefox Help, but cannot find anything that addresses this specific problem of hanging immediately after launch.

    I have the exact same problem--and it just started around November 11, 2011. I have rebooted, reinstalled, and relaunched many times and Firefox just hangs on launch. Spinning beach ball of death and all that.
    I have not installed any new software or changed anything on my computer.
    Using Mac OS X 10.6.8, Aluminum Mac with 2.4 GHz Intel Core 2 Duo, 8 GB RAM.

Maybe you are looking for

  • Ideas for a new product: Combining RMI, JMS, ...

    Hello! I am an experienced Java programmer trying to think of a mid-sized (i.e., less than 10,000 lines of code) project that uses remote computing (RMI and the like) and JMS to create a product that would be of frequent utility. I have some ideas bu

  • IPOD Touch won't turn on

    I just ran into this issue and the fix is relatively simple.  I took my Touch back to the Apple Store, they plugged it into a wall outlet and explained the USB cord as well as the car charger doen't have enough power to charge a dead touch. m I went

  • Another way to look at Events and albums (smart and dumb)

    Maybe this will help others, but I had an epiphany regarding iPhoto 08 and the organizational method (or lack there of) in regards to Events and albums, etc. Here it goes: iPhoto is now iTunes for pictures. I know it has been said before, but this ti

  • CS5 Programs Won't Open

    Hello, I have been using CS5 for a month or so on my recently purchased windows 8 laptop (I also had it installed on my older laptop).  Just last week, all the programs spontaneously stopped opening. For example, when I click on the shortcut photosho

  • SPA 3102: Troubles with fax machine connected to SPA and dialing by IP PBX

    Afternoon! I have a fax machine connected to the SPA3102 and i have configured an extension from the IP PBX, that it's working as a fax, so the problem here is that sometimes when i'm sending a fax, this one fail, it shows an error, the other problem