Can we connect xbee to cfp2020 controllers serial port for wireless communication

hi,
i wanna do data aqcuisition using ethernet as well as wireless technologies, for that i wanna use xbee with cpf 2020. is it possible?
thanks in advance

You can do it fine..
I am guessing the wireless modem is really a router as well. When you say wireless do you mean 3g internet or 4g internet or do you mean cable or adsl and a wireless modem router.?? It is just helpful to know what you are talking about by wireless modem or wireless internet.
You have that plugged into ethernet over power (EOP) adapters .. that is great.
Plugged into TV again that is fine.. although I am unclear what or how it is decoding.. is it IPTV??
Now to your specific questions.
Now, is it possible to
a) connect the Time Capsule to the powerline, so it can act as an access point? When connected to this powerline (ethernet) I hope I won't loose speed to the wireless connection
Yes, the TC needs to be bridged..
Go to manual setup of the Airport utility.. click on the internet tab.. go to connection sharing on the bottom of that page.. select off bridge mode.. update the TC.
Now you can plug the TC into the EOP adapter. And it will work as Wireless Access Point.. WAP or short AP.. and switch.
Plug the TV into the TC as well.. that should all work fine.
b) will I be able to connect my digital tv-decoder to the TC without any problems? So the TC is the decoder's "ethernet port"?
Hope this is a bit clear, as English is not my mothertongue...
IPTV can be complicated to setup and exactly how it works will depend on the main router.. sometimes IPTV is only delivered to a specific ethernet port.. in which case the above suggestion will not work.. you can use either internet or the TV.. not both..

Similar Messages

HT5299 can i connect my sony smart TV via thunderbolt port for better resolution.

can i connect my sony smart TV via thunderbolt port for better resolution.

You can connect the TV via the Thunderbolt port. However if the result is "better resolution" would depend on what resolution you have now (I'm guessing you mean with the HDMI adapter?)
I'm myself connecting the Mini Mac with a Thunderbolt->VGA adapter to my TV and get full 1920x1080 resolution.
Have you checked your Display settings? Make sure mirroring is off, then check what resolutions you can get on the current connection.
Please return with some more data.

Can not connect All in one 209b to new router for wireless printing....

Have an HP laptop and All in one priner 209b. All was working fine, wired and wireless printing. Then we had to upgrade our ATT Uverse router. Everything works...even wireless laptop and printer when connected to laptop. However, can't get printer to printer wireless since it has the old router info. I used the disk but when it asks to you to pick the printer, I choose the printer but it says printer now found ??? what ???? and this is with the cable connected. I do not have the wizard on the touch screen but I did reset to factory settings hoping it would load new router info but it does not. How do you manually enter router into for wireless printing. Is it best to delete the printer and reinstall as new...wired and then wireless ???
I am about to call an outsite company and pay the outrageous charge as the help on HP is not working. Thanks

Try this utility:
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c02114394&cc=us&dlc=en&jumpid=reg_r1002_usen&lc=...
007OHMSS
I was a support engineer for HP.
If the advice resolved the situation, please mark it as a solution. Thank you.

Can I connect a device to get added LAN ports for my Airport Extreme?

Can I connect an added device to my styetem to get added LAN ports for my Airport Extreme Router system?
Mark Edwards

Connect a Gigabit Ethernet switch to any of the 3 Ethenret ports on the AirPort Extreme to add as many ports as you need.
Switches come in 5-port, 8-port, 16-port, etc versions.
Your local computer/electronics superstore will have what you need.

TA20713 Can I connect and IP Phone to the LAN port on Airport Express?

I am having difficulty connecting my internet phone to the internet. I have a Comcast Modem with only 1 ethernet port which is connected to the Airport Express. We are using a secured wireless network and I do not have a way of entering a password or identifiying the network on the Internet Phone. Will I be able to connect the phone to the LAN for Internet access or do I need something else? Normally I would simply try this out, but we have an old Airport express as the primary wireless router and we'll need to re-work out in home network a bit to get the newer Airport closer to the phone. I'd like to know if this is doable before we put all the effort in. Thank you

Tampadeb wrote:
Can I connect my Xbox 360 to the Ethernet port on my fios box? I have a wireless connection right now but is slow and lags. For me to run an ether from the router it would have to be very very long and go the the kitchen. So I was wondering if I could get it via the Ethernet port on my box directly into my xbox
The Ethernet port on the "fios box" (I assume you are referring to a DVR/STB) is not active. However it's easy to use a MoCA adapter to get a direct connection if you have a working coax outlet. Simply search "MoCA adapter" in the "Ask the Community" search box for details. Also look here:
http://forums.verizon.com/t5/High-Speed-Internet-DSL-and-Dial/Connecting-To-The-Internet/m-p/599649#...

I presently have a linksys wifi router, can i connect a time capsule through cat 5 cable for my apple products and to boost my signal ?

I presently have a linksys wifi router, can i connect a time capsule through cat 5 cable for my apple products and to boost my signal .i live in a three story home and my linksys is in the basement. I have one cable on the top floor where most of my computers/ipads are.

can i connect a time capsule through cat 5 cable for my apple products and to boost my signal
Yes, configure the Time Capsule to create a wireless network using the exact same wireless network name and password as the Linksys wireless network.

TS1398 have been connected to my wireless network using a netgear sky broadband router succesfully for a few weeks, suddenly can't connect, network is showing but no signal - all other wireless gadgets are connected just fine - including iphone - any idea

my ipad 4 has been connected to my wireless network using a netgear sky broadband router succesfully for a few weeks, suddenly can't connect, network is showing but no signal - all other wireless gadgets are connected just fine - including iphone - any ideas?

Some things to try first:
1. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
2. Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
3. Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
4. Go into your router security settings and change from WEP to WPA with AES.
5. Renew IP Address: (especially if you are droping internet connection)
    •    Launch Settings app
    •    Tap on Wi-Fi
    •    Tap on the blue arrow of the Wi-Fi network that you connect to from the list
    •    In the window that opens, tap on the Renew Lease button
~~~~~~~~~~~~~~~~~~~~~~~~~
iOS 6 Wifi Problems/Fixes
How To: Workaround iPad Wi-Fi Issues
http://www.theipadfan.com/workaround-ipad-wifi-issues/
Another Fix For iOS 6 WiFi Problems
http://tabletcrunch.com/2012/10/27/fix-ios-6-wifi-problems-ssid/
Wifi Doesn't Connect After Waking From Sleep - Sometimes increasing screen brightness prevents the failure to reconnect after waking from sleep. According to Apple, “If brightness is at lowest level, increase it by moving the slider to the right and set auto brightness to off.”
Fix For iOS 6 WiFi Problems?
http://tabletcrunch.com/2012/09/27/fix-ios-6-wifi-problems/
Did iOS 6 Screw Your Wi-Fi? Here’s How to Fix It
http://gizmodo.com/5944761/does-ios-6-have-a-wi+fi-bug
How To Fix Wi-Fi Connectivity Issue After Upgrading To iOS 6
http://www.iphonehacks.com/2012/09/fix-wi-fi-connectivity-issue-after-upgrading- to-ios-6.html
iOS 6 iPad 3 wi-fi "connection fix" for netgear router
http://www.youtube.com/watch?v=XsWS4ha-dn0
Apple's iOS 6 Wi-Fi problems
http://www.zdnet.com/apples-ios-6-wi-fi-problems-linger-on-7000004799/
~~~~~~~~~~~~~~~~~~~~~~~
How to Fix a Poor Wi-Fi Signal on Your iPad
http://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Fix-A-Poor-Wi-Fi-Signal-O n-Your-iPad.htm
iOS Troubleshooting Wi-Fi networks and connections http://support.apple.com/kb/TS1398
iPad: Issues connecting to Wi-Fi networks http://support.apple.com/kb/ts3304
WiFi Connecting/Troubleshooting http://www.apple.com/support/ipad/wifi/
How to Fix: My iPad Won't Connect to WiFi
http://ipad.about.com/od/iPad_Troubleshooting/ss/How-To-Fix-My-Ipad-Wont-Connect -To-Wi-Fi.htm
iOS: Connecting to the Internet http://support.apple.com/kb/HT1695
iOS: Recommended settings for Wi-Fi routers and access points http://support.apple.com/kb/HT4199
How to Quickly Fix iPad 3 Wi-Fi Reception Problems
http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
iPad Wi-Fi Problems: Comprehensive List of Fixes
http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
Connect iPad to Wi-Fi (with troubleshooting info)
http://thehowto.wikidot.com/wifi-connect-ipad
Fix iPad Wifi Connection and Signal Issues http://www.youtube.com/watch?v=uwWtIG5jUxE
Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
How To Fix iPhone, iPad, iPod Touch Wi-Fi Connectivity Issue http://tinyurl.com/7nvxbmz
Unable to Connect After iOS Update - saw this solution on another post.
https://discussions.apple.com/thread/4010130
Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
~~~~~~~~~~~~~~~
If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
 Cheers, Tom

Deskjet 3050 can't connect now that i'm with Qwest isp with wireless modem

had it connected no problem with comcast and my netgear wireless modem. I now have a qwest PK5000Z wireless modem and can't get my desk jet 3050 online. someone at qwest said there is a driver update is that true?
i ran my HP network confi page and the active connection type says None. Network status says OFFLINE
wireless 802.11 says status: Disconnected
Network name SSID found FAIL
every time i press the window buttons on my printer in the wireless dept. it says either pin or push. and now matter which i push it comes back wps timed out try again or cancel. the trouble shooter test said no trouble detected. i tried inserting my disk that came with my printer but once starting it says already installed. i give up. is there a driver i can dowload? i set up my profile on HP to request this stuff weekly. about an hour ago.
i need to get this printer running. i have resumes to print out. hope someone can help. Thank you

PROBLEM SOLVED. I DELETED MY HP PRINTER INFO FROM MY PROGRAMS AFTER GOING INTO CONTROL PANEL.
THEN STARTED UP MY DISK THAT CAME WITH MY PRINTER AND FOLLOWED THE DIRECTIONS. TURNS OUT I HAD TO GO INTO A WEBPAGE THAT I VISITED BEFORE BUT FAILED TO WRITE IT DOWN. THE QWEST REP LED ME TO IT AGAIN AND THIS TIME I WROTE IT DOWN. I'M SO LAME. I FINALLY LOOKED ON THE DARN QWEST pk5000z MODEM TO FIND THE SSID NUMBER AND ALL THAT. TURNS OUT I FORGOT MY SETTINGS ENTIRELY. PRINTER WORKING...
GOOD NIGHT

How can I connect multiple devices to Mac mini display port? I need to connect a Canon 5D to my Mac and display the result on a VGA video projector. I am using mini hdmi to mini display for the camera. Can I connect the VGA to any other port?

Hi there I am connecting a Canon 5D to my laptop trying to use it as a webcam trough camtwist.
At the same time I need to output the streaming to a videoprojector.
The cam is connected to the mini display port do there is no port available for the VGA cable anymore.
Do I need to use a different port for the projector? Should I buy a video card?
Can't connect the camera via USB as that is too slow and it will freeze.
Many thanks for all your help
Best
Faeve

You might do better on a forum other than this one, which is "Using iPhone"

I get an error that says can't connect to the itunes store when I search for a specific artist only

Hi all,
When I try to search for music by a specific artist in the iTunes store on my iPhone 5, I get an error that says "Can't connect to the iTunes store". This only happens when I search for music by this band. I can search for other artists and listen to song clips and everything seems to be connecting to the iTunes store just fine. But for some reason, it doesn't work with this artist. The band name is July for Kings. Not sure if anyone else has had this issue, but I hope so!
Thanks,
Rick

IF you are not able to resolve your issue then contact Apple Support at https://getsupport.apple.com/GetproductgroupList.do?caller=ikb&PRKEYS=PL220,1316 29,PL113,PL302,PF3,PF4,PF9,PL303,PL339,p…
hopefully they can help. You may also be interested to know that for some reason it is just not available to a lot of people at the same time. Appears to be an issue of more users than their servers can handle. Has happened periodically for at least 6 months that I know of but apparently users are able to use within several days if there are no other issues with the users device.

I changed my password on Airport Express and now can't connect in iTunes. It does not ask for password ,I just see trying to connect and it fails. How do I enter new password in iTunes when it just keeps trying to connect ?

When I select the Airport Express as Remote Speaker in Itunes I just see trying to connect and it can't connect.
I changed my password on the Airport and I don't see where I can put in the new password in Itunes.
This problem is on my Imac. On my Mac Pro a window came up asking for password to connect because it was the first time.
I can connect on the Mac Pro but not my Imac.

Update on my problem connecting in Itunes with my Airport Express. Not sure if anything I tried made a difference
but I finally got the Pop up window saying this device requires a Password. I entered the password and I can once again use the Airport Express as a remote speaker.

How can I connect to sun fire v125 with serial mgr port by hyperterminal

Hi there!
My c.o. got a sun fire v125 server.My mission is finish setting up the server.But as I followed the sun
fire v125's document, it aint be connected to this server with serial mgr port by using windows xp hyperterminal .
My step as:
step1. Find the original RJ45 net cable from the v125 box, and put one side into
Serial MGR Port of V125.
step2. Combined the RJ45 net cable's other side with DB-9 converter,
then plug the DB-9 converter into the PC's serial port(9 pins).
step3. start the pc(windows xp sp2), and then creat a hyperterminal link in COM1 as:
Bits/Sec--9600, DataBits--8, Parity--None, Stop bits--1, Flow control--Xon/Xoff
And then pause connect. make it hang up.
step4. push the sun fire v125 power button. after 1mins, resume the hyperterminal,
connect to the v125.
as above all is all my step here. Somewhere incorrect?if theres no problem, why can't I receive the
"sc> " promote?
Theres only one thing what i can do is input from keyboard....?
I had known that there will be promoted the "sc> " after you start the connection of hyperterminal with the correct steps?
BTW,I had input "#." with enter key, but it doesnt work!
Is there anybody met this problem as mine? Or can you give me some hits?
Thank you for your reading.
Sinceley Regards
Maqintoshi. 2008.2.7 pm4:10
Edited by: maqintoshi on Feb 6, 2008 11:51 PM

Im sorry for replying so late.
I'd solved it long time ago.
finally I found I made a mistake that I connect the Serialport Cable which came from PC
to the RJ45(NIC) port which came from Sun Server :-@
If you still can not get the prompts, check these parameters of your hyperterminal:
connect a terminal or a terminal emulator (PC or workstation) to the SC serial management port.
Configure the terminal or terminal emulator with these settings:
* 9600 baud
* 8 bits
* No parity
* 1 Stop bit
* No handshaking

Can I connect an external hard drive to Time Capsule for off site back up?

I like having a copy of everything at another site in case of a house fire. Can I connect an external hard drive to Time Capsule to make a duplicate of what is on Time Capsule? I would store that hard drive at work and bring it home monthly or something to back up Time Capsule. Thanks!

Can I connect an external hard drive to Time Capsule to make a duplicate of what is on Time Capsule?
That is exactly what the Archive function on the Time Capsule is for. Connect a USB drive and click Archive, and a mirror image of your Time Capsule will be copied over to the USB drive. It's a slow process that will take 4-8 hours depending on how much data is on the Time Capsule, so best to start things late at night and let them run overnight.
Another option would be to use a commercial application like Carbon Copy Cloner to keep your backup. The advantage to this approach is that once the first "master" backup is done, the application will only back up the changes on the Time Capsule that have occurred since the last backup. So, subsequent backups will be much faster, probably only taking about 10-15 minutes.

SE-YARI- Can't connect to 3G network after having used it for almost an year on the same phone. :(

HI, i use a sony ericsson Yari phone that i bought in March '10, and i have been using BSNL 3G network on it for quite some time now.. But for the past few weeks i can't connect to a 3G HSDPA network. at times the display shows "NO access to network" and at other times i can't make calls from the phone though the phone shows coverage in the top left corner in the display.. My phone has been updated with the latest software upgrades. Reinstalled the software from the SE site through update srvice twice last week. What could possibly be wrong??
My doubts are:
1) Is it a prob i can troubleshoot myself or does it need to be given to the service centre?
2) If it has to be repaired at the service centre, how long will it take them to resolve this prob? I ask this specifically because the last time i gave my phone in for some display prob they took an annoying TWO MONTHS!!
I love my phone.. And i can't live without intrnet on the go.
P.S. Let me put in some additional info.. the phone works fine on the GSM network and the GPRS is ok too. Jus that the slooooow net speeds test my patience.
Yes, my phone supports 3G , my network supports 3G and my sim is a registered 3G sim. (and pls MODS, don't advice me to chek if ther is 3G coverage at my location,coz ther is and i ve been using 3G for quite awhile). The sim and the network work fine on any other phone when i checked(incidentally, on a Sony Ericsson ELM).

I know you checked the SIM in another phone and it seems OK, but it might still be worth trying another 3G SIM in your phone.Otherwise, it could be an issue with the SIM card module in the phone.

Connect a PIC/MCU micro controller to serial port of phone

Hello,
I am relatively new to j2me programming and i would lke to ask if it's possible to connect a MCU to the serial port of the phone and receive streamng data while the MIDlet is on?
If so how can this be done> Does it work the same way a serial connection? I connect the MCU to the USB pins then to the mobile phone.
Does anyone who have worked with this care to share their valuable experience? Thanks in advance.

Hi, i checked with the helpdesk from motorola and they replied that i require a license to access the proprietary interface (please refer to the reply below). I'm thinking ofusing Sony Ericsson k610i since it's JP-7. However, I wonder if they have similar issues with it.
It seems that since we are to interfacing with a PC, the allocation of a virtual port might be a problem, that'smy main concern.
FAQ found in motorola website:
We'd like to connect a RS232 device to a RAZR V3 phone. From a Java API perspective this is possible via the CommAPI.
We have succesfully tested to connect the RAZR V3 Mini-USB with a PC via a USB-cable - and we were able to transmit data from the RAZR V3 to the PC (Hyper Terminal) and vice versa.
Which technology is needed in the RS232 device (no PC - just a stand alone RS232 device) to communicate to the RAZR V3 via the Mini-USB?
Answer
We do not normally support the use of non-PC RS232 connections to current Motorola handsets. The only serial connection supported is serial-over-USB, where the handset is connected to a USB port on a PC, and the PC operating system assigns a virtual COM port to the USB connection for this purpose. Microsoft Windows is normally needed to meet this requirement.
Although RS232 functionality exists within the handsets, it is a Motorola proprietary interface only available to firms who licence the technology from us. Motorola currently licenses the CE Bus technology to selected 3rd party companies interested in building accessories for our PCS devices. Please contact Gene Eggleston ([email protected]) or telephone 847-523-4976 (USA) for information on the license and business arrangement. As a licensee you will receive a specification that details the access and use of Motorola's CE Bus.

Can we connect xbee to cfp2020 controller​s serial port for wireless communicat​ion

Similar Messages

Maybe you are looking for

Can we connect xbee to cfp2020 controllers serial port for wireless communication