Can we convert a variant bom in to a multiple bom

my problem is i have  a variant bom for a material. i want to create  a alternative boms for that material.it says can not be done sine the bom is a variant bom. it can be done only for a multiple bom.

Hi,
Yes, This is the SAP standard functionality.
Regards,
V. Suresh

Similar Messages

  • How can I convert string to the record store with multiple records in it?

    Hi Everyone,
    How can I convert the string to the record store, with multiple records? I mean I have a string like as below:
    "SecA: [Y,Y,Y,N][good,good,bad,bad] SecB: [Y,Y,N][good,good,cant say] SecC: [Y,N][true,false]"
    now I want to create a record store with three records in it for each i.e. SecA, SecB, SecC. So that I can retrieve them easily using enumerateRecord.
    Please guide me and give me some links or suggestions to achieve the above thing.
    Best Regards

    Hi,
    I'd not use multiple records for this case. Managing more records needs more and redundant effort.
    Just use single record. Create ByteArrayOutputStream->DataOutputStream and put multiple strings via writeUTF() (plus any other data like number of records at the beginning...), then save the byte array to the record...
    It's easier, it's faster (runtime), it's better manageable...
    Rada

  • HT203433 Can I convert a single track audio book into multiple chapters?

    This is more for my 6 year old son, we have on CD Thomas the Tank Engine story CDs, which imported as individual songs/chapters, so they can be shuffled.  I recently purchased another Thomas story CD from itunes assuming it would download in the same way, but it was an audiobook.  It does not show different chapters, they are all lumped together in on single file.  I have gone through and made a note of the timings where the 12 stories start and stop, so is there any way that I can separate them into 12 separate files under one album? 

    _zeppelin2 wrote:
    Hello,
    Also, I understand that I can always "place" (i.e. drag and drop) the image requiring processing into the Photoshop document containing the adjustment layers, saving a merged copy as jpeg, and repeat... but such a manual method would border on insulting to this prowess of a program.
    If anyone can get creative and suggest a method of recording an action that can make use of the document with the adjustment layers and a variable document that will be passed through during the batch process, I'm all eyes!
    You have the other choice with drag/drop or duplicate where you copy the adjustment layers into the other image document.  Target all the adjustment layers in the layer palette click on the first one the Ctrl|CMD+click on the others or if adjacent Shift+click on the last one to target all the adjustment layer then use menu Layer>Duplicate Layers...  and use the pull down menu in the pop-up dialog to choose the other open image document.
    You can of course record an action when you add all the adjustment layers then play that action on the other images. Twenty adjustment layer on top of an image seems a bit extreme to me.

  • How do I convert a Variant of type=String to G data? (LV 5.1.1)

    I've tried to return a string in the Variant return of a VB function in a DLL. (I want to do this so that I can retain the interface and thus binary compatibility in the DLL.)
    When I use the DLL function in LabVIEW 5.1.1 I
    get an error in the call library function call (returning). It looks like there is a way to handle this in v 6.0 but I have to use 5.1.1 for this application. Is there a way for LV 5.1.1 to handle a Variant containing a string?
    Thanks
    Dave Karon
    Concepts NREC

    Hi Dave,
    you can use the type conversion function located under advanced -> data
    manipulation to convert the variant into a string.
    Henrik
    Dave Karon schrieb in im Newsbeitrag:
    [email protected]..
    > I've tried to return a string in the Variant return of a VB function
    > in a DLL. (I want to do this so that I can retain the interface and
    > thus binary compatibility in the DLL.)
    > When I use the DLL function in LabVIEW 5.1.1 I
    > get an error in the call library function call (returning). It looks
    > like there is a way to handle this in v 6.0 but I have to use 5.1.1
    > for this application. Is there a way for LV 5.1.1 to handle a Variant
    > containing a string?
    >
    > Thanks
    > Dave Karon
    > Concepts NREC

  • I recently purchased QuickTime 7 Pro to convert avi files to mov files for editing on Imovie. However, QuickTime won't play the files. How can I get them to play and how can I convert them to mov files?

    I recently purchased QuickTime 7 Pro to convert avi files to mov files for editing on Imovie. However, QuickTime won't play the files. How can I get them to play and how can I convert them to mov files?

    I recently purchased QuickTime 7 Pro to convert avi files to mov files for editing on Imovie. However, QuickTime won't play the files. How can I get them to play and how can I convert them to mov files?
    Both the AVI and the MOV file extensions refer to the file container and not the compressed data the file contains. Both are generic file containers in that each may contain any valid combination of audio and/or video data that is compatible with the codec component configuration of the system on which the file was created. On the other hand, whether a file is playback compatible, conversion compatible, and/or edit compatible depends on the data actually contained in the file container. So, you are basically dealing with two separate issues here—the container and what is inside it.
    Basically, if you want to make your files ediit compatible with iMovie, you must change your file container to one that is acceptable to iMovie and convert the data to edit compatible audio and/or video compression formats as may be necessary. The best approach is to determine what codecs were actually used to create the original AVI files and add them to your system if possible. In most cases a codec package like Perian can be added to your system's codec component configuration to may the AVI file playable. Once they are playable, in the QT 7 app then they can be chnged or converted to file types and compression formats that can be edited in iMovie. (While Perian handles most codecs commonly used to create AVI files, it does not handle all possibilities and, while the Perian codec package still works under cureent Mac OS versions, its development group has decided to drop further development/support of the package.)
    Background: AVI is a file container originally developed by Microsoft back in 1992 but for which official support was discontinued about 11 years. Despite its limitations, Windows users still tend to use this file based on its open source ease of use and generic nature, thus, making its use so popular that most users are unwilling to switch to more modern but less generic file types. Since some AVI legacy compression formats have never been transcoded for the Mac or use beyond OS 9 or OS X PPC platforms, it is often important to know what specific compression formats are contained in the AVI file to know which codecs to add to your system and which not to add in order to avoid possible codec conflicts.
    You can use many different converters to convert AVI files to iMovie edit compatible files. Most third-party apps contain their own buit-in codecs which do not relay on the Mac codec component configuration. Free ones, like HandBrake, usually have limited conversion capabilities while those that have more varied outputs are usually commercial in nature and will cost you additional cash. QT 7 Pro or the free MPEG Streamclip app allow you to access you own system's component configuration and use any available codec component like DV, AIC, MPEG-4, H.264, Photo JPEG, etc.—all of which are iMovie compatible for editing purposes—but only after making the AVI file QT 7 player compatible.
    In order to determine what compression formats wewre used in your AVI files you can
    1) Try checking the Finder "Info" window,
    2) Use the "Inspector", "Media Info", or "Properties" window of any player app that will open the file, or
    3) Use a general media utility app like "MediaInfo" to read the file characteristics.

  • How can I convert MP3 to AWB or AMR format

    How can I convert MP3 to AWB, AMR format?

    Because I faced the same issue today and although the Nokia Multimedia Converter was last updated in the year 2003, it did the trick for me. Instead of giving the setup.exe your Nokia Account, go back one step, and use this to ‘register’ that product.
    In that converter, as audio, select AMR Wideband (WB AMR) which creates .awb files. Those have a sampling rate of 16 000 Hz which is great for HD-Voice like audio books. Actually for voice-only media, I went for a bit-rate of just 12.2 kbps, still great as explained by Wikipedia. With that bit-rate only go for standard AMR if your phone does not support the wideband variant, because there is not difference in size.

  • Routings for Variant BOMs

    Hi,
               I've created a variant BOM for material T-F. The variants are T-FX, T-FZ, etc. Now I need to create routings for the variant BOM. Could u guide me how to create routings for these variants, Whether I've to create individual routings for all these variants, or a single routing is enough?
          awaiting for ur replies.
    Thanks and Regards,
    R.Jeyaraman

    Hi,
         For variant configuration, you create routing in the normal procedure. But assign the object dependencies(Selection conditions) in the operation, operation sequences wherever it is needed to select a particular variant.
    You can also refer  for more details:
    [Super Routing procedure|http://help.sap.com/erp2005_ehp_03/helpdata/EN/92/58d455417011d189ec0000e81ddfac/frameset.htm]
    Thanks
    Muthu

  • For Variant BOM & Variant configuration

    Dear All,
    Is there any tool to upload Variant BOM & Routing in standard SAP. Is it complete manual ?
    Regards
    Aniruddha

    1. Since youare using class item you will hvae one more characteristics called Plastic type in the Class
    2. You can maintian one variant table, in which you can maintain Plastic Type and specific Gravity
    3. Now using this you can try to infer the value and using a procedure you should be able to calculate the weight for the BOM item.
    Kindly let me know for feedback
    Reg,
    Dsk

  • How can I convert a Microsoft Publisher document to PDF format. I have free version of Acrobat.

    How can I convert a Microsoft Publisher document to PDF format. I have free version of Acrobat.

    Hi raythree,
    I'm sorry that your PDF conversion is working. Can you please tell me if you're getting a specific error message? Knowing that can help pinpoint the cause of the conversion failure. However, here are a couple of things that you could try:
    Clear your browser cache (steps to do this vary by browser).
    If you're using a work computer, check with your IT team to confirm if you have firewall/proxy settings that restrict the ability to upload files to the Internet.
    Try another web browser.  A list of supported browsers for accessing the ExportPDF service is available here: http://www.adobe.com/acom/systemreqs/.
    Also, note that there is a 100MB file size limit, so if your publisher file is larger than that, it won't upload to ExportPDF.
    I hope this helps. But let us know if you need further assistance.
    Best,
    Sara

  • How to remove the Variant BOM?

    Dear All,
    I am currently having the variant BOM. I need to create alternative BOM for all the BOM headers.
    I cannot create it till i remove the variant bom tag from the BOM headers.
    Kindly let me know the procedure to remove the Variant BOM tag from the BOM header materials.
    Thanks.
    Aditya.

    Hi,
    As you have already maintained alternative BOM for materials system will not allow you to create variant BOM as already alternative BOM is present for the same.
    So you need to delete all alternative BOM for required materials. Then you can create variant BOM for those materials.
    You can delete BOM's on mass basis also. Use CS28 for the same.
    Hope this will help you.
    Regards,
    Ashish

  • Multiple BOM and Variant BOM

    Hi Gurus
    Just a small question...
    Can we change the technical type of the BOM from V(Variant) to M(Multiple).
    As that field is always grayed out in editing mode (CS02).
    If we can change, how ??
    Thanks Vineet

    Dear Vineet,
    If a product has more than more than one alternative BOM(more than one BOM for the same BOM
    usage) for that products under the BOM header you will be able to see the technical type as M -
    Multiple BOM.
    You cannot change this.
    variant BOM
    Production Planning and Control (PP)
    A combination of a number of bills of material that lets you describe a product, or several products that have a lot of identical parts.
    The variant BOM describes each object completely, for example, the product "lamp." Each variant BOM contains all the components. This type of BOM is not configurable.
    Procedure
    The system allocates technical types:
    according to the number of alternative BOMs
    When you create the first alternative for a BOM, the technical type is not yet defined. If you extend the BOM by creating an alternative, the system automatically assigns the technical type multiple BOM.
    according to the transaction
    If you create a BOM using the Create variant of... function, the system assigns the technical type variant BOM. After this, you can no longer create alternatives for the BOM.
    Regards
    Mangalraj.S

  • Trying to drag pdf files i have and combine them into one pdf file in the account i just purchased with Adobe. when i drag a pdf file over Adobe doesn't accept it. says it can not convert this type of file. but it is an Adobe file. Do I need to change it?

    Trying to drag pdf files i have and combine them into one pdf file in the account i just purchased with Adobe. when i drag a pdf file over Adobe doesn't accept it. says it can not convert this type of file. but it is an Adobe file. Do I need to change it in some other form befor dragging it?

    Hello djensen1x,
    Could you please let me know what version of Acrobat are you using.
    Also, tell me your workflow of combining those PDF files?
    Please share the screenshot of the error message that you get.
    Hope to get your response.
    Regards,
    Anubha

  • How can I convert an int to a string?

    Hi
    How can I convert an int to a string?
    /ad87geao

    Here is some the code:
    public class GUI
        extends Applet {
      public GUI() { 
        lastValue = 5;
        String temp = Integer.toString(lastValue);
        System.out.println(temp);
        showText(temp);
      private void showText(final String text) {
        SwingUtilities.invokeLater(new Runnable() {
          public void run() {
            tArea2.setText(text + "\n");
    }

  • How can I convert an InputStream to a FileInputStream ???

    How can I convert an InputStream to a FileInputStream ???

    Thanks for you reply, however, I am still stuck.
    I am trying to convert my application (which runs smoothly) to a signed applet. The following is the original (application) code:
    private void loadConfig() {
    String fileName = "resources/groupconfig";
    File name = new File(fileName);
    if(name.isFile()) {
    try {
         ObjectInputStream in = new ObjectInputStream(new FileInputStream(fileName));
         pAndGConfig = (PAGroupsConfig)in.readObject();
         in.close();
         return;
    } catch(ClassNotFoundException e) {
         System.err.println("++ERROR: "+e);
    } catch(IOException e) {
         System.err.println("++ERROR: "+e);
    System.out.println("Can't find file: " + fileName);
    Because all code and resources now reside in a Jar file (for the signed applet), I must use the following line to access the resources:
    InputStream is = this.getClass().getResourceAsStream(fileName);
    I then need to convert the 'InputStream' to 'ObjectInputStream' or 'FileInputStream' so that I can work with it.
    I would be very grateful if you could help shed some light on the matter - Cobram

  • How can I convert an OVM vm (.img) to VDI (virtualbox)?

    Hi,
    how can I convert an OVM vm (.img) to VDI (virtualbox)?
    Is .img format a raw image? If yes can I use "VBoxManage convertdd" to convert from .img to vdi?
    tnx & regards,
    S.

    Hi,
    "VBoxManage convertdd" solved.
    Regards,
    S.

Maybe you are looking for