Can we copy a Job?

Hi..
Is it possible to have a copy of a jon ?
If yes...how can we do that?
Thank you

Ya..Thanks
I am able to copy the job...
But what about the start conditions of the new job...?
System is not allowing me to create the start conditions for my copied job.
Is there anyway I can insert start conditions for my job?
I checked the thread given in the reply but there also the story ends after copying the job...no mention of start conditions in that thread also..
Thank You

Similar Messages

Can't copy and/or change Job

Hi everyone. This is my first post here, so I appologies if I'm posting it in the wrong section.
I'm getting the next issue:
When I try to copy a Job from SM37, I check it and go to Job --> Copy, and then, when I get the pop up where usually you could change the name of the job, this pop up is empty. I mean, it has only the title, but no info inside.
In addition, if I want to change this Job, I go to Job --> Change, I can not modify the start condition, since I don't have all the buttons we use to have there, like the check button, or the save button once you already check it. Even if I close this screen, I have disabled the save button in the main change job screen:
We already check permissions and we found that is not and authorization problem, since I have SAP_ALL and SAP_NEW profiles
Any idea or suggestion?
Thanks in advance.
Regards

Hi everyone. This is my first post here, so I appologies if I'm posting it in the wrong section.
I'm getting the next issue:
When I try to copy a Job from SM37, I check it and go to Job --> Copy, and then, when I get the pop up where usually you could change the name of the job, this pop up is empty. I mean, it has only the title, but no info inside.
In addition, if I want to change this Job, I go to Job --> Change, I can not modify the start condition, since I don't have all the buttons we use to have there, like the check button, or the save button once you already check it. Even if I close this screen, I have disabled the save button in the main change job screen:
We already check permissions and we found that is not and authorization problem, since I have SAP_ALL and SAP_NEW profiles
Any idea or suggestion?
Thanks in advance.
Regards

I can't copy and paste from Word to the Internet (Firefox or Chrome), but I can copy and paste from Internet to Word

I suddenly can't copy and paste text from Word to the internet (Firefox or Chrome, email or other websites), but I can do the reverse. Any ideas? Copy and paste works between Word docs, and it works between internet sites (e.g., web page to email), just not from Word to the internet. Please help. I need to copy and paste my resume for an online job application.

There are a range of different kinds of forms. For example, this site uses very simple controls that don't automatically convert Word's formatting to an online format. The site where you are trying to paste your resume probably works differently.
What methods have you tried using to paste? Typically one of these will work:
* Ctrl+v
* right-click > Paste
* Edit > Paste (from the menu)
Some sites offer their own buttons to paste, but for security/privacy reasons, Firefox usually disables those.

LCM - copy (promote) jobs from DEV to TEST

Hi all!
I am searching for a way to copy the LCM jobs (to promote objects from DEV to TEST) from the DEV environment to the TEST environment.
Is there a way to do so? Or do I need to recreate the jobs on the TEST new, when I want to transfer the same objects from TEST to PROD?
Thanks,
Hakan

And do you know, how an existing job can be refreshed?
I can create a job where a report is promoted from DEV to TEST. When the report now changes, so that a universe used is changed, the job itself is not updated.
The only way I found is to recreate the job again. If I can solve the refresh problem of a job, I could copy the jobs from DEV to TEST and exchange the logins from DEV -> TEST and from TEST -> PROD.
ciao Hakan

Copying background jobs of another user.

Respected gurus,
I have to delete an user id, he has schedluled several jobs, but jobs has to be continued.
Please let me know how to copy background jobs scheduled by other user.
Regards,
Daya

Daya
You donu2019t necessarily need to copy the jobs.
You can just change the owner of the step(s) in the jobs.
The name on the job itself will remain the same, but the job (steps) will run as the new name that you enter.
If displaying the previous owner is an issue, then you will need to copy the jobs.
Hope this helps.
PJ

How can i copy my contact from iphone to address book

how can i copy my contact from iphone to address book

When connection your iPhone to iTunes, go to the "info"-tab (I think it's called), and check the box "Sync contacts from Address Book". This should do the job.
Cheers

How do you ensure people can not copy your materials and steal your ideas.

We have a number of training manuals and we just print them for our participants. A number of participants every year ask for e-copies. Its a great idea but how do I ensure they can not copy the materials and re-purpose it for their own use. In worse case scenerio they could copy huge chunks of the manuals and become competitors.
The searchable feature is one reason sited by clients for e-copies. This kind of shuts down the scan -OCR approach. To make it searchable would be a sizable task.
Some approach to limit easy copying;
bi-column writing columns
Waterwarks
encrypted passwords - however this still may allow it to be passed around to wider audiences.
I feel like I'm asking futile question in the modern e-era, how do i lock down my materials allow for ease of use and distribution and yet ensure our IP is not distributed beyond the intended audience.

Staying on paper provides only the perception of "protection".
It is trivial to prep a hardcopy source, scan the paper, OCR and have it all in PDF.
While Acrobat's OCR will do an adequate job one can step up to something more robust if desired.
Once PDFs with OCR output are in hand it is, again, trivial to export the textual content.
Going to TXT, RTF, DOC or DOCX lets one clean up, edit, etc.
Go digital. Apply appropriate copyright information to metadata and elsewhere.
Monitor your field of endeavor. At the end of the day it really is a limit field of play with limited players in a very big world.
Should you come across the baddies have the lawyers tree 'em eh.
If you've a end-user friendly, usable product you will get more "end-users".
Be well...

How can I copy mp3 files from my Itunes library to an SD card for use in a non-apple phone?

How can I copy mp3 files from my Itunes library to an SD card for use in a non-apple phone? I can physically copy the tunes as mp3's but the phone does not seem to be able to play all of them. Do I need to copy an entire album or can I just pick & choose individual songs? The phone is question is an LG running who knows what for an operating system.

AAC is Advanced Audio Coding. Basically it's a format that sounds better than MP3 but doesn't take up as much space as a lossless format (like you'd have on a CD). More than likely you've had that encoding turned on when you ripped your music into itunes (it's the default encoder). Therefore your LG phone won't play them.
You need to turn off the AAC format by going to the iTunes menu, Preferences, General (at the top), then clicking the "Import Preferences" button. Change the AAC Encoder to MP3 Encoder. After that you'll have to make MP3 copies of your songs by right clicking them and selecting "Create MP3 Version." You'll get a copy of the song that should transfer to your SD card and have MP3 encoding. Hopefully your phone will play that.

How can i copy apps from one computer to another?

how can i copy apps from one computer to another?

You don't mention which operating system you have so it's difficult to provide an answer since the mac and Windows stores the files differently.
The other thing you can do is just re-download the apps from the iTunes Store. Just login to the iTunes Store on the other computer using the same Apple ID. On the right-hand side of the iTunes Store page you will see a 'Purchased' link. Clicking on that will take you to a page that will list your past purchases which you can re-download to the new computer.

Can't copy files to hard disk

I have been having trouble copying/moving files to an external hard drive from my Macbook Air 3,2. I have moved and copied files from the MacBook Air many times to the external hard disk but this time I am having a lot of trouble.
I tried to move 2 movie files but it was taking an incredibly long time. So I clicked the "x" to cancel the transfer. However, it didn't stop it straightaway. The transfer just remained in limbo. Then I got a message saying something about how I didn't disconnect the hard disk properly and the hard disk just seemed to have disconnected itself from my computer even though I didn't eject it.
Then it caused problems for my MacBook Air. When I went to check on the disk in Utilities, it told me I had to use the installation disk to start it up. Other strange things happened like my desktop picture just disappeared and suddenly I had an extra 10GB on my hard drive.
I repaired the disk successfully using the installation thumb USB drive.
(I also repaired the external hard disk).
But I am having the same problem again when I try to move files onto the hard disk. It doesn't seem to work, as it's incredibly slow and when I cancel it, it says I ejected the hard disk wrongly. And the drive does not appear in the Finder Window.
I don't know why this is happening to me. I repaired the MacBook Air HD and I also repaired the external disk and I can't copy movie files onto the hard disk. I have enough space and both disks are Mac Ext Journal formatted. I copied lots of movies the other day (about three days ago and last night) onto the hard disk without any problems.
I really need to move the movies from my computer as I will runn out of disk space on the computer soon (I have about 12 GB left right now).
I tried copying a jpg picture as a test, and it copied it OK but it took a long time. Much longer than normal.
I got an error message just now:
The Finder can’t complete the operation because some data in “Elechxxxxxxxxxx.mp4” can’t be read or written.
(Error code -36)
I never got this sort of error message before but now I am getting this message today several times when I try and copy the movies. I don't think it's the files themselves because I copied the same sort of movie files last night without any problem.
And as I said, the jpg file took a really long time to copy, like 2 minutes even though it's only a very small file.

This is not about saving the data on the external drive but I found this information to be helpful in case people have problems ejecting a drive:
https://discussions.apple.com/thread/1322931
I threw the following:
sudo umount -vf /dev/disk1s1
and the drive umounted. -v is verbose, just in case there were any errors thrown I wanted to know, and -f is force umount, which forces the drive to unmount. Check 'man umount' from terminal to see more info on these.
After doing this a couple times (I was doing some testing with some other things to find a faster solution than having to open terminal and umount) it just started umounting correctly. I have no idea why, but it did. So just keep that command in mind, just in case.
Gryyphyn, out.
This may prevent the drive from being damaged by incorrect ejection. Because I could not eject the drive using force eject, restarting the computer etc, I unplugged the drive, which damaged the hardware of the drive.
If I had known about the command window method, I might have been able to avoid all these problems now that I have with a damaged drive and trying to rescue the data on that drive.
That being said, I think Apple should try and resolve this problem they have with users not being able to eject drives. It seems to be a VERY common problem, and has nothing to do with users' negligence but to do with a systemic fault of Apple's.

"can not start a job" issue in AWM

Hi ALL,
I am maintaining my cube from PLSQL with following options
1. buildtype = "BACKGROUND"
2. trackstatus = "true"
3. maxjobqueues = 3
i get following error when i see the "olapsys.xml_load_log" table
***Error Occured: Failed to Build(Refresh) DB_OWNER.MY_ANALYTICAL_WORKSPACE Analytic Workspace. Can not start a job.
Can anybody explain when and why this error occurs? I have wasted a lot of time searching for this issue, but have found no person facing such issue.
Hi Keith, it will be great if you can answer this one.
My database version is 10.2.0.4.0 and AWM version is also 10.2.0.3.0
Kind Regards,
QQ
Message was edited by:
dwh_10g

Applies to:
Oracle OLAP - Version: 10.1 to 11.1
This problem can occur on any platform.
Symptoms
- We have an AW maintenance / refresh script or procedure that contains BuildType="BACKGROUND", so that the AW maintenance task will be sent to the Oracle Job queue.
- When we execute the AW maintenance / refresh script or procedure, we do not get any errors in the foreground, the script/procedure has been executed successfully.
- However when we look into the build/refresh log (see <Note 351688.1> for details) we see that the maintenance/refresh task failed with:
13:29:39 Failed to Submit a Job to Build(Refresh) Analytic Workspace <schema>.<AW Name>.
13:29:39 ***Error Occured in BUILD_DRIVER
- In the generated SQL trace for the session of the user who launches the AW build/refresh script or procedure, we see that ORA-27486 insufficient privileges error occurred at creation of the job.
We see from the relevant bit of the SQL trace that err=27486 occured while executing the #20 statement which is 'begin DBMS_SCHEDULER.CREATE_JOB ...', and the statement is parsed and tried to be executed as user having uid=91:
PARSING IN CURSOR #20 len=118 dep=2 uid=91 oct=47 lid=91 tim=1176987702199571
hv=1976722458 ad='76dd8bcc'
begin
DBMS_SCHEDULER.CREATE_JOB(:1, 'plsql_block', :2, 0, null, null, null,
'DEFAULT_JOB_CLASS', true, true, :3); end;
END OF STMT
PARSE
#20:c=1000,e=1100,p=0,cr=0,cu=0,mis=1,r=0,dep=2,og=1,tim=1176987702199561
EXEC #20:c=65990,e=125465,p=10,cr=1090,cu=3,mis=1,r=0,dep=2,og=1,tim=
1176987702325167
ERROR #20:err=27486 tim=465202984
Cause
User who tries to create a job (executes DBMS_SCHEDULER.CREATE_JOB() procedure) does not have the sufficient privileges.
Solution
1. Identify the user under which the job is supposed to be created. This user is not necessarily the same as the user who launched AW build/refresh script or procedure. Get the corresponding username from one of the %_USERS views e.g. from ALL_USERS.
e.g.
SELECT user_id,username FROM all_users WHERE user_id=91;
2. Identify the system privileges currently assigned to the user by connecting as the user whom the privileges need to be determined, and execute:
SELECT * FROM SESSION_PRIVS ORDER BY PRIVILEGE;
3. Ensure that the CREATE JOB privilege is listed.
The CREATE JOB privilege can be granted in various ways to a user:
- via role OLAP_USER or via role OLAP_DBA (see view ROLE_SYS_PRIVS for what privs are assigned to a role):
GRANT OLAP_USER TO <username>;
- explicitly
GRANT CREATE JOB TO <username>;

Can not see running jobs from, package

I have a problem with processing parallely runing jobs:
I am creating another immediately runned jobs in a main job. Those two parallel jobs (2 loads from different databases) have to be finished before I run next operation (working out loaded data). Problem is that, after starting those 2 parallel jobs, I can not see them by select from ALL_SCHEDULER_RUNNING_JOBS that is executed immediately after I create those jobs in a package. If I take a look into ALL_SCHEDULER_RUNNING_JOBS from anonymous statement I can see all my running jobs. Let's sum it up:
1/ Start of main job
2/ Running 2 immediately created jobs (load data)
3/ Checking in loop if jobs created in step 2 are still running
3.1/ Jobs are running (ALL_SCHEDULER_RUNNING_JOBS check) - sleep for a
while - It never happens - can't see any running jobs from select executed in
package but can see them in
anonymous statement
3.2/ Jobs finished - start processing loaded data
Can somebody help me with this task?
Thanks alot!
Jakub

Hi,
There is no reason a job should be visible from an anonymous block but not from inside a job. There are two things that may be happening here.
- jobs scheduled to run immediately my not start running as soon as they are created/enabled, you may need to wait a bit before they start running (they will appear in all_scheduler_jobs immediately but maybe not all_scheduler_running_jobs immediately)
- you may be running into privilege issues. Is the user that executes the anonymous block the same as the user that the job is running as (the job's schema) ? If not maybe the job user does not have privileges to see the job (you can grant alter on the job to the user to ensure this).
Can you see the jobs in the all_scheduler_jobs view from within the job with status RUNNING ? If you can see jobs in all_scheduler_jobs as RUNNING but not in all_scheduler_running_jobs then this is a bug of some sort.
Thanks,
Ravi.

How can I copy a file from adobe reader to my contacts

How can I copy a list of names and addresses from Adobe Reader to my contacts

you can buy imovie or other 3th party apps to edit videos
they will then let you import the movies to iphoto if you have osx
and access the files from my computer where the ipad show up as a camera in windows
you can't access the ios devices filesystem directly and they can't access something like an external harddisk themselvs

Can't copy file from SAP-directory to FTP server

Hello,
I can't copy files from the SAP server to the FTP server. The file is created with OPEN DATASET and CLOSE DATASET commands and is placed in the SAP-directory S:\usr\sap\DEV\DVEBMBGS00\work.
I can see and read the file with transaction al11, so I know it's there.
But the FTP command always gives the same error:
S:\usr\sap\DEV\DVEBMBGS00\work\[FILENAME] errno 22: invalid argument
I can connect to the FTP, but the put command keeps failing. Somehow, the file in the SAP directory can't be read, it seems, even when
Any ideas?
Thanks in advance.
Dave

Ok, I found out that I have to use SAPFTPA as RFC destination type, instead of SAPFTP, otherwise the folders can't be located.
But with SAPFTPA I can't seem to connect to the FTP server. I've tested the connection with sm59 and it works, but for the FTP it doesn't work. When I use SAPFTP as destination type, it still works.
What can I do?
Thanks.

Can't copy files from mounted DMG. What's up??

So all of a sudden, I can't copy files from mounted DMG files. It's strange because if there is one file and I drag it to another location, like desktop, it won't copy. If I drag 2 files from the mounted DMG to the desktop one of them copies. If I drag 3, then 2 copy... it's always all but one of the files... never all of them.
I've tried repairing permissions but nothing works. I'm at a loss...
thanks
D
iMac Core Duo 17", 1.5 gig RAM Mac OS X (10.4.8)

Try holding option when you drag the files. This tells the mac to move the files to the desktop of your computer not the desktop folder of the DMG (usually a hidden folder)
If that doesn't work it may be that you need administrative privileges to move the files. Make sure you are logged on as as an administrator by selecting the account tab in system preferences and making sure it says "admin" under your user name. Log on to or create an administration account then try moving the file.
Hope this helps, let me know
Thom

Can we copy a Job?

Similar Messages

Maybe you are looking for