Can we copy bt111h_oppt/salesteamlist view into zcomponent

Hi,
can any one tell me that in bt111h_oppt component salesteamlist view is there can i copy that view to another component?
if i want that view functionality in other component how can i do.
i am new to crm so kindly help me.
thanks
naveen

You can try to search some information about ComponentUsages in your created BSP application.
If you add an existing view in an existing application to the ComponentUsages, you will be able to use this specific view in your application.
regards,
Joris

Similar Messages

  • How can I copy and paste text into Word in Acrobat 9 Pro

    How can I copy and paste text into Word from Acrobat 9 Pro?

    You might find it easier to export the file to Word under File > Export > Word in Acrobat 9.

  • How can I copy current board  content into new board?

    Hi there.
    how can I copy current board  content  into new board?

    Hi-
    Can I drag it to the external drive or perhaps just the songs, then copy/drag them to my new computer ?
    Pretty much, Yes.
    If you wish to keep the formatting, notes, ratings, etc. that are with the library, you should allow the iTunes software to "discover" the library.
    If the iTunes Library from one machine is placed on an external drive, the iTunes software on the other machine can be directed to the library of the external drive when connected.
    Allowing "Copy to Home folder/music" will provide for copying of the library to the new machine.
    Alternatively, if the library is loaded onto an iPod, the iPod can be used to transfer the music.
    http://support.apple.com/kb/HT1329

  • How can I copy one material caracteristic into VBKD-BSTKD in VA02?

    Hi all,
    I need to find a user-exit or BADI to do some changes when I save the order (VA02)
    I have to copy the value of the material caracteristic (Configuration) into field VBKD-BSTKD.
    Any help would be useful..
    thx in advance.

    Yes that s my point of view too but my problem is that I need to copy the material caracteristic into the field in table VBKD..
    from where can I have the value of one caracteristic and what's the the internal table of caracteristics used in include MV45AFZZ

  • How can I copy a YouTube clip into iMovie?

    How can I copy a clip from YouTube into iMovie?

    Sorry, I edited it off, i don't know if it's forum approved. It is on others and i just seen older threads here with similar answers.
    If someone says this is okay, then i'll post.

  • Can't copy and paste text into quark

    hello, all:
    i can't copy any text (single word, nor sentence) from mail, word, indesign into quark. the only way i've been working around this is by exporting the text i want to copy, and "get text" when in quark.
    any words of wisdom much appreciated.

    BOILERPLATE TEXT:
    Note that this is boilerplate text.
    If you give complete and detailed information about your setup and the issue at hand,
    such as your platform (Mac or Win),
    exact versions of your OS, of Photoshop (not just "CS6", but something like CS6v.13.0.6) and of Bridge,
    your settings in Photoshop > Preference > Performance
    the type of file you were working on,
    machine specs, such as total installed RAM, scratch file HDs, total available HD space, video card specs, including total VRAM installed,
    what troubleshooting steps you have taken so far,
    what error message(s) you receive,
    if having issues opening raw files also the exact camera make and model that generated them,
    if you're having printing issues, indicate the exact make and model of your printer, paper size, image dimensions in pixels (so many pixels wide by so many pixels high). if going through a RIP, specify that too.
    etc.,
    someone may be able to help you (not necessarily this poster).
    a screen shot of your settings or of the image could be very helpful too.
    Please read this FAQ for advice on how to ask your questions correctly for quicker and better answers:
    http://forums.adobe.com/thread/419981?tstart=0
    Thanks!

  • How can you copy information from Safari into Pages

    Is there a way to easily copy data, such as financial tables from Safari into Pages and maintain the integrity of the table and the data within it?  When I copy and paste it comes out all misaligned and into multiple pages.  The same thing happens if I try to highlight the table in Safari and drag it into Pages.  Is there not a "paste special" function in Pages like there is in Microsoft??

    See:
    http://support.apple.com/kb/HT5775
    You can then drag the resulting image into a Pages document, and position.
    Ernie

  • Can't copy and paste paragraphs into Blogger

    Hi all,
    I don't know why Safari can't copy and paste paragraphs of text into Blogspot.com posts, but I just can't seem to get it to work. It drops the text below the entry field every time, even if I have the cursor flashing in the blogger typing box (composer). It's just not working. Any ideas?
    Also, wondering if Safari has any media download functions like Firefox's "Unplug"?

    BOILERPLATE TEXT:
    Note that this is boilerplate text.
    If you give complete and detailed information about your setup and the issue at hand,
    such as your platform (Mac or Win),
    exact versions of your OS, of Photoshop (not just "CS6", but something like CS6v.13.0.6) and of Bridge,
    your settings in Photoshop > Preference > Performance
    the type of file you were working on,
    machine specs, such as total installed RAM, scratch file HDs, total available HD space, video card specs, including total VRAM installed,
    what troubleshooting steps you have taken so far,
    what error message(s) you receive,
    if having issues opening raw files also the exact camera make and model that generated them,
    if you're having printing issues, indicate the exact make and model of your printer, paper size, image dimensions in pixels (so many pixels wide by so many pixels high). if going through a RIP, specify that too.
    etc.,
    someone may be able to help you (not necessarily this poster).
    a screen shot of your settings or of the image could be very helpful too.
    Please read this FAQ for advice on how to ask your questions correctly for quicker and better answers:
    http://forums.adobe.com/thread/419981?tstart=0
    Thanks!

  • How can I copy a sound track into photoshop

    In the past I thought I put the soundtrack as a AIF file in Soundtrack Pro and then copied and pasted it into a photoshop window, but that doesn't seem to work now.

    Roger Longley wrote:
    In the past I thought I put the soundtrack as a AIF file in Soundtrack Pro and then copied and pasted it into a photoshop window, but that doesn't seem to work now.
    Roger Longley wrote:
    What I want is an image of the waveform.
    Photoshop does not have the ability to analyse audio files, are you sure you know how you did this in the past? You must do that in an audio editor, like, oh, Soundtrack. You'd use Grab to copy the window and paste that into Photoshop. If you want the waveform display to move in sync with an audio file, you ust export the waveform as a movie file and that is a bit more complicated.
    bogiesan

  • I no longer see the URL of any website so can't copy and past URLs into any emails, etc. Is there some setting to make URLs visible? when I updated, the URLs disappeared. I'm on a MacBook.

    When I updated to the latest version of Firefox, the URLs disappeared so they are no longer visible at the top of the Firefox page. I can enter sites, but I can't copy and past the URLs anymore. Why can't I see the http://... info anymore? Is there some setting I changed or what might be the problem?
    thanks.
    TVDoc

    Try this:
    Click on the orange Firefox tab > Highlight Options > click Navigation Toolbar.

  • I have songs missing on iTunes but they are on my iPhone. How can I copy from the iPhone into iTunes on my mac air

    I have songs missing from my iTunes on the computer but they are on my iPhone 3s and my iPad mini. How can I get them into iTunes so they are in my library.?I have the latest iTunes on my commuter. Thanks for any suggestions.

    If they were purchased from iTunes then connect the phone to your Mac's iTunes and the File > Devices > Transfer Purchases should copy them over. If they came from other sources (e.g. copied from CDs) then you will need a third-party program on your Mac to copy them back - there are some listed half-way down this page : Recover your iTunes library from your iPod or iOS device.
    If by 'missing' you mean that you have them listed in the Music part of your iTunes library but get the 'would you like to locate' message when trying to play them then you will need to delete them from there for the Transfer Purchases to work - otherwise that will see those entries in your library and assume that you still have them somewhere and not copy them back.

  • How can I copy a mailing list into address book without having to type them individualy

    Hi
    I have a mailing list and I would like to send emails to everyone on the list in one go, I copied and pasted the list into my email, but can I have this group somewhere so that I can just call it up like an ordinary address from the address book, preferably without having to type every name individualy into the address book. I tried making a group in the address book and pasting the list in without success,if this is possible can some explain how I can acheive this
    Thankyou
    Richard

    Richard,
    Unfortunately, you have to add them one at a time - wait a sec... oh, yeah, if the contact is in your contact list it will 'auto-fill' as you begin to type. So if I want Wendy Whatshername, all I have to do is type Wen and the contacts will show up for you to select and auto-fill the name and email address.
    Hope this helps,
    Clinton

  • Bulk-copy from Sybase View into a File using Java Runtime...help !!!

    The following is a bulk-copy operation, from a table in Sybase database into a file in Unix machine.
    bcp view_name out file_name -c -U user_id -P password -S server_name
    This bulk-copy utility is working fine when run from command line of a Unix machine, for any number of records.
    But when I try to do it from a Java application for more than 1.84 lakh records in the view, the following problem occurs.
    The file is created and from the view, 1.84 lakh records are copied into the file.
    Then the program hangs.
    The application waits for the bulk-copy process to be completed, which does not resume after copy of 1.84 lakh records.
    No exceptions are thrown.
    Even for just one record more than 1.84 lakh records, this happens.
    The number of bytes corresponding to 1.84 lakh records many records are 11040060.
    This is the bulk-copy portion of the application.
    String strCommand = "bcp view_name out file_name -c -U user_id -P password -S server_name";
    Runtime run = Runtime.getRuntime();
    Process proc = run.exec(strCommand);
    int i = proc.waitFor();
    I am capturing InterruptedException, IOException and the superset Exception also.
    Pls throw some light on this.

    Sorry to bother you, but I saw this topic you posted on the Sun Java Forum and was wondering if you were ever able to resolve it.
    I am experiencing the exact same problem and was hoping to get it resolved soon.
    Thanks in advance!

  • Can I copy an entire event into a project?

    This is day 2 with my new iMac after starting with Apple II 30 years ago and working with MS products for 25 years, so go easy on me.
    I have a Canon HV20 HD Camcorder (DV tape-based) and it imports easily into iMovie 08. Of course, if I have an hour of video, I get a TON of clips in my new Event. At this very moment, my concern is to empty the tapes onto the computer and have something that can be watched even without editing.
    Is there any way to move the entire event into a project which can be burned to a DVD or watched as-is? (As opposed to selecting each clip and dragging it into the project.) Or should I just leave it down in the event area, since, as I am just finding out, it cannot be cleaned out because that is where the actual video resides.
    I am not an editing freak, so mainly my movies are just video snapshots to be viewed casually at some distant point in the future.
    Also, is there a really simple way to dump a project onto a DVD (remember I am recording in 1080i) so that it can be watched on an HDTV? Do I need Blu-Ray or HD-DVD to do this???
    BTW, a salesperson at B&H Photo in NYC recommended for me to get tape (I hate tape!) since it would be a better way to edit and save, and WOW, he was right!!!
    Randy

    There is an easy way to move your movies onto DVD, subject only to the capacity of the DVD. In iDVD, there is an option for One-Step DVDs, that creates a DVD of exactly what is on your tape. It is an option that comes up when you start iDVD.
    The problem you may encounter is that blank DVDs hold a relatively small amount of video, so if you're recording in 1080i, you might not be able to put much onto an individual DVD. I'm not aware of any Blu-Ray or HD-DVD burners that work on a Mac, but I have to confess I've not looked into them.

  • Can I 'copy' albums, or photos, into a new iPhoto library??

    I am doing an iPhoto library rebuild after my iPhoto editing tool stopped working.  A quick test of a new library has solved this issue, but the rebuild of the original library is taking ages and I'm concerned this will not work. So far it's been nearly 25 minutes. 
    iPhoto quickly generated this message:
    Rebuilding Library: 1974 versions restored
    But it continues to 'work'.  I don't have too many photos yet, but am traveling in Gautemala and so am looking for the quickest and easiest way to get my old library photos into the new, working one.  It won't take me very long to re-create albums or anything, so this I am unconcerned about.  I simply wish to get the photos from my original library, including the ones I edited/cropped/enhanced, into my new one that has a functioning editing tool....
    Is there any way to do this simply?  Can I just copy the pictures into the new library?  I've read/heard that 'importing' will not work.  If importing simply destroys the organization of the library, I don't mind.  At this point, I simply want my photos as they are now...
    Cheers!  Thanks in advance...

    Thanks for your response...
    In other words, by 'changes', you mean none of my editing will be brought over??  If I want to re-crop images, etc, I will have to do so?
    Also...I'm fairly new to Mac.  What exactly do you mean by restoring my backup to see if that fixed my editing problems?  Unless there is some application that automatically backs up everything in my library somewhere, I actually have been unable to back anything up yet (another issue, another story, you can see my other posts today!).
    Thanks again in advance....

Maybe you are looking for