Can we copy the terms of payment from Purchasing info record in PO instade

Dear All,
Can we copy the terms of payment from Purchasing info record in PO instade of Vendor master.
My requirement is that client want to maintain terms of payment as per Vendor - Material combination in Purchasing info record and same should be appeared while creation of PO.
I am able to maintain the terms of payment in Pinfo record but same is not getting copied while creation of purchase order thats the issue now.
I had maintain the terms of payment in condition tab-- addtional data tab but still system is taking the payment terms from vendor master.
its urgent if u have any solution please help.
Regards,
Sunil

Dear Sir,
I am able to maintain the terms of payment in Pinfo record but same is not getting copied while purchase order thats the issue now.
I had maintain the terms of payment in condition tab-- addtional data tab but still system is taking the payment terms from vendor master.
so please tell me if there is anything we have to do to update the terms of payment from info record not from vendor master.
VSR is not feasible as no. of record are very much.
regards,
umesh

Similar Messages

  • How can i remove the terms and conditions from my app store on iphone 5s ?

    How can i remove the terms and conditions from my app store icon on iphone 5s

    Hello mrh1962,
    Thank you for providing the details of the issue you are experiencing with accepting Terms & Conditions on your iPhone 5s.
    First, I recommend restarting your phone and then resetting if it's still not working:
    Restarting your device
    Press and hold the Sleep/Wake button for a few seconds until the red "slide to power off" slider appears, and then slide the slider.
    Press and hold the Sleep/Wake button until the Apple logo appears.
    Note: Reset your device only if you are unable to restart it.
    Resetting your device
    Press and hold the Sleep/Wake button and the Home button together for at least ten seconds, until the Apple logo appears.
    You can find the full article here:
    iPhone, iPad, iPod touch: Turning off and on (restarting) and resetting
    http://support.apple.com/kb/ht1430
    If you can access your home screen, I also recommend verifying that cookies are not blocked and private browsing is turned off in Settings>Safari:
    iPhone User Guide - Safari settings
    http://help.apple.com/iphone/7/#/iph3d7aa74dc
    Thank you for using Apple Support Communities.
    Best,
    Sheila M.

  • How to retrieve the long texts from  purchase Info record (ME13)

    Hi,
    How do I retrieve the long texts data from the tab, Texts of the Purchase Info record(ME13).  I want to retrieve the current long texts data(long text1, long text2 long text3, long text4) for a given purchase info record. These long texts points to the structure BRM06I.
    So, now how do I fetch the data from the structure BRM06I. Is there any function module for the same..
    Thanks.

    Hello,
    Texts are stored in tables STXH & STXL (header and item). You can search these tables by selecting Text object = EINA and Text name = Info Rec #. The text ID's you will see are the ID for various texts maintained.
    Cheers !

  • How to change the Qty Conversion on a Purchase Info Record.

    I am trying to change the Quantity Conversion for a particular Purchase Info Record as it is incorrect.  The inputs are greyed out on the Purchasing Organization1 Data Screen.   I have also gone to the Conditions screen and the Menu Selection is greyed out when I go to the Menu for EXTRAS->Conversion Factors.  The Conversion Factor has been changed at the Additional Data Screen of the Material Master.   Any help would be greatly apprectiated.  Thanks in Advance.

    I have solved this problem.    From the Condition Record I went to the Menu Path, GOTO->ADDITIONAL DATA.  From here I was able to go to the Conversion Factor and make the changes.

  • Inco terms not flowing in Purchasing Info record.

    Hi ,
    Eventhough I maintained Incoterms in Vendor master , while creating Purchasing Inforecord with the same vendor , Incoterms is not picking from the vendor master.
    Kindly give the reason for this ........
    regards,
    YK

    Hi Jurgen,
    Thanks for ur reply. I have not maintained contract PO. Checked in other Purchasing Info record , Incoterms field value  is not flowing in Purchasing Info record Eventhough I have maintained in all the vendor master.
    regards,
    Yogesh

  • How can I copy the Thunderbird Address Book from Windows to Ubuntu?

    I use Windows 8.1 on one Pc and Ubuntu 14.04 on the other.
    Thanks in advance for your help
    Best regards,
    Ep

    I think the best way is to export the required address books to LDIF files on the first machine and import those LDIF files on the second machine.
    Alternatively you can copy the the data *.mab files from one machine to the other. The two default address books are represented by abook.mab and history.mab and can be simply copied. Other user-defined address books will be named as abook1.mab etc and will need to be imported. I'd suggest MoreColumnsForAddressBook for this task.

  • Can i copy the entire data flow from one std-Infocube to a new RT Infocube

    Hi,
    I created a new Real Time Infocube , copy of an existing Standard Infocube. But is there any option to copy the entire data flow - like transformations, DSO and all that ?

    Hi,
    We can copy standard Infocube to Realtime Infocube ,it will work in BI7.0.
    The procedure is  1) Go to Context menu of Standard IC and select copy option.
                                 2)In Edit IC option select Real Time and create it ,it copies as real time info cube.
                                 3)But for Loading data,Go to context menu of Real time IC and select option Change Real Time Load Behavior
                                     we get 2 options the first one is  1)Real time data target can be loaded with data,planning not allowed ,if we select data will be loaded.
                                 4)if we go for second option that is 2)Real time data target can be planned , data Loading not allowed ,if we select this,it  is  used for planning that is comparison of data.
                                5) This is difference between standard and Real Time InfoCube.
    Thanks,
    Supriya@n

  • Delivery time calculation from purchase info records in MRP

    Hi experts.
    I am using MRP -manual reorder point planning . I have maintain the delivery lead time as 10 days . This material has a info-record for a vendor and a contract also. we maintain the delivery time for the supplier is 20 days in the info records. And a source list is also maintain for this material with reference to the contract and assigned as MRP relevant.
    We run  MRP of this material and create the PR directly.
    we run ME59N for automatic creation of PO also.
    what I see is the delivery time defined in the PR is consider as 10 days from the material master MRP view. But when we convert the PR to PO the delivery time is updated from the inforecord. but the delivery date in the PO line item is not update. It is showing the same delivery date as PR.
    Is it possible to update the delivery date bas eon the info record when we convert from PR to PO automatically?
    regards
    DP

    I don't know the answer to your question, but can point you in another direction; you can set the system up in such a way that already MRP (as per the way you have described that you work) will take into consideration the planned delivery from the Info record/Contract:
    In transaction OPPQ check the "Scheduling: Info Rec/Agreement" box!
    This will make MRP take the planned delivery time from the IR or Agreement, whenever the source (vendor) is identified during the MRP run.
    Regards,
    Mario

  • SRM PR Not picking UOM from Purchase Info Record

    Dear Experts,
    When we create a SC from SRM a PR is created automatically in ECC.
    This PR is created with UOM as QT but it should be EA .
    We checked from SRM side, the UOM passed to ECC is EA but when PR is created in ECC UOM is QT.
    In PIR record is EA and base UOM is QT, UOM should be pulled from PIR as EA.
    Why is it not pulling UOM from PIR?
    Thanks a lot ,
    Anubhav

    no there is no settings at PR level.
    since UOM is a global data which is attached with Master data in the materiual master.
    i may not answer your question.
    i believe your PRs are created in SRM because you dont have fixed sos in srm.
    however your PR must be converted into PO after assiging source of supply.
    you see in SRM, while creating a shopping cart , the system always propse you to create UOM (from source of supply like Contract maintained for material) .
    i believe your PRs are created from  SRM because you dont have fixed sos in srm.
    how many source of supply exists for that material . (inforecord / contract) .
    revisit your material master data.
    you are confusing every one here.
    since you have valid inforecord for the material and how PR created here .
    what is the settings in define back end system - is it always PR ?
    br
    muthu

  • I am switching computers. Is there a way to copy the mozilla program file from my old computer and "install" it on my new computer? Or do I need to redo the complette install?

    I have a new computer. Can I copy the mozilla program folder from my old computer to the new or do I need to do anew install from the website? I do know that I can transfer bookmarks and such but what about the entire program?
    == User Agent ==
    Mozilla/4.0 (compatible; MSIE 8.0; Windows NT 5.1; Trident/4.0; .NET CLR 1.1.4322; .NET CLR 2.0.50727; .NET CLR 3.0.4506.2152; .NET CLR 3.5.30729; .NET4.0C)

    Download CS5 products

  • Payment terms in Vendor Master data and purchasing info record

    Hi, all, I met one trouble. While I create Purchase Order. In the header item, payment terms is automatically pop up from the data maintaining the vendor master data or purchasing info record if there is difference payment terms between in vendor master data and in purchasing info record. What happend?
    Sometimes, When you create purchase order, payment terms is not automatically pop up even you maintained in the vendor master data or purchasing info record. Why? Is it meaning that I can manually to input payment terms while create each purchase order which can be difference data with vendor master data or purchase info record?
    Thank you very much in advance,

    Hi,
    The payment terms is usually defaulted from either vendor master or purchasing master data record such as contract/outline agreement.  Unless it is set through configuration that the payment terms be set as mandatory, any failure to maintain payment terms won't stop you from posting your PO as this information will only be useful during invoice receipt maintenance.  Having said that if you are setting up your system with discount condition type as part of your PO pricing schema then it is necessary that the payment terms shall be maintained during PO creation.
    Cheers,
    HT

  • Price from Pur Info record not picking up

    Hi All,
    We have a requirement to pick Price from Purchasing Info record for Standard Cost estimate (CK11N/CK40N).
    The purchase info record has been created and price maintained in both u201CNet Priceu201D and u201CEffective Priceu201D fields in info record.
    I have selected Strategy L Price from Purchasing Info record and maintained sub-strategies 3, 4 and 5 in Valuation variant:
    Strategy 3 u2013 Net Quotation Price
    Strategy 4 u2013 Gross Quotation Price
    Strategy 5 u2013 Effective Price from Quotation
    Though I maintained the above, system is not picking up price from info record in CK11N.
    Am I missing anything on this?
    Any help is appreciated.
    Thanks.
    Regards,
    Sree

    Sreechakravarty,
    Per your description, system picked up the price other than the Purchase Info Record price, right? If so, you can try to remove other pricing priorities while only leave the pricing priority "L", and then run CK11N again to see whether system can find the info record, otherwise system will give error message such like "can not find material price in plant code &1/batch &2".
    If the system do can not find the purchase info record, you should check anything wrongly maintained to the info record such like valid period. Make sure the valuation date you entered during CK11N should be within the valid period of the info record.

  • I have copied my CDs into iTunes  (currently running v11) to play on my iPod.  I have now bought a non Apple mp3 player to use when I am out running.  How can I copy the many tracks I want from iTunes onto the new player?

    I have copied my CDs into iTunes  (currently running v11) to play on my iPod.  I have now bought a non Apple mp3 player to use when I am out running.  How can I copy the many tracks I want from iTunes onto the new player?
    Thanks

    I tried Notpod but can't get it to work.  Part of the problem, I suspect, is that I can't create a folder on my player (a SanDisk Clip+).  I also can't do this in Windows Explorer.  Whilst I can see the Clip+ in Explorer, the option to create a new folder isn't there.
    The error mesag I get in Notpod is:
    "Unhandled exception has occurred in your application.  If you click Continue, the application will ignore this error and attempt to continue.  If you click Quit the application will close immediately.
    InvalidArgument=Value of '0' is not valid for 'SelctedIndex'. Parameter name: SelectedIndex"
    Then, when I plug the Clip+ into a USB port, iTunes thinks it is my iPad - which is because, I guess, Notpod hasn't worked.
    I can drag and drop files from the Music folder where my iTunes tracks are stored onto the Clip+ and they get converted but I'd rather synchronise a Playlist from iTunes if I can.
    Thanks anyone who can help

  • How can I copy programs (iWorks) and files from Time Capsule to my HD manually? The problem is that the migration assistant does not recognize my backup file and the user on the TC. (If I open the TC on finder, it it there though)

    How can I copy programs (iWorks) and files from Time Capsule to my HD manually? The problem is that the migration assistant does not recognize my backup file and the user on the TC. (If I open the TC on finder, it it there though)

    How can I copy programs (iWorks) and files from Time Capsule to my HD manually? The problem is that the migration assistant does not recognize my backup file and the user on the TC. (If I open the TC on finder, it it there though)

  • The computer that I used to sync my Ipad with crashed.  How can I copy the pictures from my Ipad to my new computer?

    The computer that I used to sync my Ipad with crashed.  How can I copy the pictures from my Ipad to my new computer?  When I try to use Picassa to import them I can only see the 'Camera Roll; folder but I have several other folders with hundreds of pictures in them

    To copy photos to your computer that were taken with the iPad, copied to it via the camera connection kit, or saved from emails/websites then see this page - on a PC you can use the windows camera wizard
    To copy photos that were originally synced from a computer you will need a third-party app on your iPad such as Simple Transfer which can copy them off via your wifi network. But as photos are 'optimised' when they are synced to the iPad, any that you then copy back to a computer may not be exactly the same as they originally were on your computer.

Maybe you are looking for