Can we create a analyses with measures as rows for comparision trend

I am working in OBIEE 11g.
Need to create a analyses with measures as rows and study their yearly progress in a single table
normally dimesions are used as rows and measures as columns but this one is slightly different ..tried using table and pivot but unable to show diff measures in single table
Something like this:
------------------------------------Yearly ------Prev year------change%
Shipped Qty ---------------------150----------100--------------50%
Delivered Qty---------------------150----------100--------------50%
Undelivered Qty-----------------150----------100--------------50%
Billed Qty---------------------------150----------100--------------50%
where shipped Qty , Delivered Qty , Billed Qty are the various measures
Please share your expertise in achieveing this
Would appreciate your help as its urgent
Regards
Pranati

Hi Pranati,
Create a Union report. You have one calculated column with just the text, eg.; 'Shipped Qty' and 3 columns with the 'Shipped Qty'-measures; Yearly ------Prev year------change%
Do the same for the other 3 Qty's
Good Luck,
Daan Bakboord
http://obibb.wordpress.com

Similar Messages

How can I create a video with effects using my ipad?

How can I create a video with effects (sepia, B&W, Negative, oval or any other shape borders) using my ipad? I would Like to keep a higher res and also be able to shrink it down to email or send in a MMS. Or should I just upload it to my PC and mess with it there? Some of the apps I have are very easy to use compared to the learning curve needed for video editing software.
Thanks

Thats the Problem . . . how many apps do I have to try until I find the one I want? I noticed a few will render the video thus losing its original size. When I went to edit it more in iMovie the video was smaller--not good. And what software do you suggest, Templeton, for the PC? I love the apps because they are easy. I dont have hours to mess around on a software to figure out if its something I want. Im looking for simplicity. Maybe Ill get more into it later. I just want to record simple video of my playing the guitar for self analysis and create a short video for family and friends.
Apps:
iMovie
CinemaFXV
VideoFix
Cartoonatic
Video illusion
VidEditor
Software:
Windows Movie maker (wont accept .mov files)
After Effects (Too little time, so much to learn)
Wondershare (Very easy but little choices)
VideoPad (Again. Few choices)

How can i create excel sheet with multiple tabs using utl file?

how can i create excel sheet with multiple tabs using utl file?
any one help me?

Jaggy,
I gave you the most suitable answer on your own thread yesterday
Re: How to Generating Excel workbook with multiple worksheets

How can I create a solution with Livecycle

I work for a high school and we have about 12 pdfs that we need parents to read/scroll through, then 10 (different) pages that we want them to print, complete and return to the school. Finally, we want them to see a "Thank you, you have done all you have to do" type screen. We want to make it as user friendly as possible so I was thinking...
Reading pages, 1 at a time with next at bottom.
Click next and it takes them on. When they get to printing pages 1 print button prints all pages we need them to print. Click next, and it takes them to optional print pages.
Click next and it says, thank you.
How can I make this happen if I already have all the pdfs?
Help please.
John Dent
[email protected]

Thank you soo much. A few questions?
They weren't created in designer but could I just import all of them?
How do "build the structure" for the naviagtion?
Where/how do you add the script.
Thanks again,
John Dent
Date: Fri, 30 Jul 2010 07:01:08 -0600
From: [email protected]
To: [email protected]
Subject: How can I create a solution with Livecycle
I assume that all of these PDFs were created in Designer. If so you can add any buttons that you want to appear on every page (Next, Previous) onto the Master page then there is script you can add to the buttons to actual move the pages (xfa.host.pageDown() and xfa.host.pageUp()). The Prin button can be added to the specific page and you can pass the page numbers that you want to print as a parameter to the print command. Lastly when you get to the last page and the click Complete you can display a messageBox with your Thank you message.
Hope that helps
Paul
>

How can I create a query with tables in INFOSET?

Dear Gurus,
How can I create a query with tables in INFOSET?
Just tables and fields INFOSET?
Kind Regards,

Hello
Check following SCN Article for your understanding/reference:
- [Using Infoset Query ,SAP Query and Quick Viewer|http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/10eab7af-0e54-2c10-28a5-87b47adbe1a5]
Regards
JP

How can I create a query with web service data control?

I need to create a query with web service data control, in WSDL, it's query operation, there is a parameter message with the possible query criteria and a return message contains the results. I googled, but cannot find anything on the query with web service. I cannot find a "Named Criteria" in web service data control like normal data control. In Shay's blog, I saw the topics on update with web service data control. How can I create a query with web service data control? Thanks.

Hi,
This might help
*054. Search form using ADF WS Data Control and Complex input types*
http://www.oracle.com/technetwork/developer-tools/adf/learnmore/index-101235.html

How can i create a button with a dynamic picture?

How can i create a button with a dynamic picture using
mcLoader.loadClip
I did create one with it doesnt seem to be working. It loses
all its
functions (eg onPress onRelease)
Thanks

I solved thep roblem anyway creating a mc.. then creating
another MC withing
the first MC and i change the picture on the second MC. And i
apply the
propierities to the first MC , and works
If i have troubles with mu sistem on the future I will use
yours!
Thanks!
"the fleece" <[email protected]>
escribi� en el mensaje
news:e67i88$jlf$[email protected]..
> the image loading will remove any properties or
functions the mc had.
>
> you need to apply them in the onLoadInit function
>
> mclListener.onLoadInit = function(target_mc:MovieClip) {
> target_mc.onRollOver=blah blah
> };
> var image_mcl:MovieClipLoader = new MovieClipLoader();
> image_mcl.addListener(mclListener);
> image_mcl.loadClip(blah, blahblah);
>
>

HOW CAN I CREATE A GROUP WITH MY CONTACTS FOR TEXTING

HOW CAN I CREATE A GROUP WITH MY CONTACTS FOR TEXTING

Olga, this is not a default feature in iPhone. You need a 3rd party application. I have created a free one, Easy Group, for group texting and group emailing.
http://itunes.apple.com/fr/app/easy-group/id461469079?mt=8
Rémi
Note: I may receive some form of compensation, financial or otherwise,from my recommendation or link.

Can I Create A Hotspot With My iPhone 4 To Use For iPod Touch?

I'm considering signing up for the tethering plan with AT&T.
My main purpose would be to create a hotspot for my iPod Touch.
I use my iPod Touch at work using Keynote. I would like the ability to download my Keynotes via Dropbox on my iPod Touch.
Can I create a hotspot with my iPhone 4 so my iPod touch would have access to the internet?

Yes.

Can we create outbound delivery with reference of purchase order

Hi All,
can we create outbound delivery with reference of purchase order?

dear friend,
as far as i know you can create it with the following references:
-to sales order;
-to STO;
-to subcontract order;
-to project;
-without any ref
are you talking about stock transport order ?
regards,

How can you create a playlist with music and music video and play those from same playlist through Apple TV?

How can you create a playlist on Ipod touch with music and music video, and play those from same playlist through Apple TV? I can download, create a playlist with both music and music video, stream that through the Apple TV with no problem. The sound and the information show up on the TV, but when it gets to a music video, it only shows the information and "artwork".
I also have a video playlist - videos play fine through the Apple TV, but will not shuffle through all videos - continues to repeat the same one. I have most definitely selected shuffle in both locations - from the playlist and on the ipod video screen while video is playing.

I finally got it... had to sync the photos with the music in iMovie, arrange the voiceover in GarageBand then export to iTunes, and then I was able to put it all together in iMovie and burn in iDVD... had a few glitches along the way but finally finished : )
Message was edited by: jpewald

Hello. I have an iPad2, and iMovie software. My main problem, for the moment, is the length of the videos: I can´t create a video with more than 56 seconds. When I try, the app shuts off... Can anyone help me?

Hello. I have an iPad2, and iMovie software. My main problem, for the moment, is the length of the videos: I can´t create a video with more than 56 seconds. When I try, the app shuts off... Can anyone help me?

Sorry. We can't help you. It's no longer an iPhone. Apple won't touch it.
Take it to whoever replaced the screen and see if they can help you.
iPhones are not user servicable and Apple does not sell iPhone parts at all. I'd be surprised if you were actually able to back it up at this point. It sounds like it's completely borked.

Can we create multiple application with single MSI(or Same MSI) in biztalk admin console ?

Can we create multiple application with single MSI(or Same MSI) in biztalk admin console ?
My client requirement is process 100 files from biztalk with in 5 min ,actually it is taking 20 min .
So I decided to created same instance of the application with multiple time in BTS admin console ,as I understand biztalk admin console never allow to install same
schema’s with multiple time .
Any help can be appreciate ..

BizTalk will automatically process multiple messages on separate threads so you may need to tune your system. The following link should get you started:
http://social.technet.microsoft.com/wiki/contents/articles/7801.biztalk-server-performance-tuning-optimization.aspx
Another possibility is to set the Batch Size property on your receive location if the adapter uses batch size to determine how messages are picked up. As an example, it you want the MSMQ adapter to immediately pick up messages and start
to process them, set the batch size to 1.
You may also need to distribute the processing across multiple BizTalk servers by installing BizTalk on additional servers and joining the existing BizTalk group.
David Downing... If this answers your question, please Mark as the Answer. If this post is helpful, please vote as helpful.

How can I create drop shadows with PSE10

How can I create drop shadows with PSE10 & PE10?

Layer styles let you quickly apply effects to an entire layer. In the Effects panel, you can view a variety of predefined layer styles and apply a style with just a click of the mouse.
Three different layer styles applied to text
The boundaries of the effect are automatically updated when you edit that layer. For example, if you apply a drop shadow style to a text layer, the shadow changes automatically when you edit the text.
Layer styles are cumulative, which means that you can create a complex effect by applying multiple styles to a layer. You can apply one style from each style library per layer. You can also change a layer’s style settings to adjust the final result.
When you apply a style to a layer, a style icon appears to the right of the layer’s name in the Layers panel. Layer styles are linked to the layer contents. When you move or edit the contents of the layer, the effects are modified correspondingly.
Once you choose Layer > Layer Style > Style Settings, you can edit the settings of a layer’s style or apply other style settings or attributes available in the dialog box.
Lighting Angle Specifies the lighting angle at which the effect is applied to the layer.
Drop Shadow
Specifies the distance of a drop shadow from the layer’s content. You can also set the size and opacity with the sliders.
Outer Glow Size Specifies the size of a glow that emanates from the outside edges of the layer’s content. You can also set the opacity with the slider.
Inner Glow Size Specifies the size of a glow that emanates from the inside edges of the layer’s content. You can also set the opacity with the slider.
Bevel Size Specifies the size of beveling along the inside edges of the layer’s content.
Bevel Direction Specifies the direction of the bevel, either up or down.
Stroke Size Specifies the size of the stroke.
Stroke Opacity Specifies the opacity of the stroke.

Can we create inbound delivery with refernce to outbound delivery?

Dear all,
can we create inbound delivery with refernce to outbound delivery?
Regards
ahmad

Dear Ahamed
I beleive it is a stock movement between 2 different plants
If so then the receiving plant will have to do GR against the outbound delivery only
The outbound delivery of the supplying plant
The outbound delivery of the supplying plant will not become the inbound delivery of the receiving plant in SAP
But logically yes
Your second post talks about outbound delivery only and that is correct
My point is your proces doesnot involve inbound delivery at all
In STO there is no inbound delivery at all
Inbound delivery in SAP means shipping notification that means the confirmation from the vendor about the despatches
That will not have muck material details and it is just a confirmation
Meaning of inbound delivery from SCM 601 logistics execution
The goods receipt process using inbound deliveries realistically maps standard
processes in many companies. If the vendor announces the goods receipt with a
shipping notification, the inbound delivery can be created either manually or
automatically on the basis of the shipping notification. It contains information
transmitted by the vendor concerning the expected delivery times and quantities,
as well as any information about packaging. It is also the reference document for
the subsequent putaway using a transfer order. If you also use the transportation
function as part of Logistics Execution, you can summarize inbound deliveries
into inbound shipments.
Regards
Raja

Can we create a analyses with measures as rows for comparision trend

Similar Messages

Maybe you are looking for