Can we create a pdf using data collected from a forms central form?

I have a form in Forms Central that is collecting data and I want to take the data and merge the fields into a pdf document with merge fields. Then send the completed merged pdf to someone else automatically?

Hi,
Kindly post your query in FormsCentral forums:https://forums.adobe.com/community/formscentral
Regards,
Florence

Similar Messages

How do I create a form using data collected from a previously completed form?

I need my users to fill in an initial registration form with a range of details. Six months or so later I need to ask the users to confirm the details and also fill in new information. Is there a way I can have the second form be automatically populated with the initial form information so they only have to fill in the new information. I need all the information to be stored in the one database. Thanks

Sorry we do not support this workflow.
Gen

Can't create a PDF using "print" from Office 2010 w/ Acrobat 9.5.1 installed

I've been working on a lengthy Word document for the past three days, upgrading most of the inserted images and straightening out the formatting. Converting the entire 180-odd page document every time I made a few updates is a bit time-consuming. I also noticed that when I converted the entire document as a whole, the quality of some (not all) of the images in the document was significantly degraded. So I'd been using the Adobe Acrobat printer selection in Word to create single page pdf files, and then used the documents tab in Acrobat to insert the new page and delete the undesirable page.
This was working fine for two days. Then I was attempting to print a page, and didn't notice the "Creating a PDF Document" window, nor did I see the requested filename in the target folder. I attempted to print the page a second time, but nothing happened. After closing several open pages, I found the "Creating a PDF Document" pop-up. But the progress bar was stuck at about 20% and never moved. Eventually I closed the pop-up and attempted to print again. The pop-up reappeared but stuck at 20%. Rebooted and got the same. I rebooted again and went into Program and Features and ran repair on both Office 2010 and Acrobat. No change.
I'm operating Win 7 (64 bit) w/ SP1 on an AMD E-350 1.60Ghz processor w/ 8GB of ram. I'm using Office Professional Plus 2010 build 14.0.6112.5000 (32 bit). I've included the System Report below. The only trick I have left is to uninstall and reinstall, but hoping for a more specific solution. Any help would be appreciated.
Available Physical Memory: 4194303 KB
Available Virtual Memory: 1511340 KB
BIOS Version: ALASKA - 1072009
Default Browser: C:\Program Files (x86)\Internet Explorer\iexplore.exe
Version: 9.00.8112.16421 (WIN7_IE9_RTM.110308-0330)
Creation Date: 2011/06/04
Creation Time: 17:17:11
Default Mail: Microsoft Outlook
mapi32.dll
Version: 1.0.2536.0 (win7_rtm.090713-1255)
Graphics Card: AMD Radeon HD 6300 series Graphics
Version: 8.17.10.1077
Check: Not Supported
Installed Acrobat: C:\Program Files (x86)\Adobe\Acrobat 9.0\Acrobat\Acrobat.exe
Version: 9.5.1.283
Creation Date: 2012/04/19
Creation Time: 22:26:37
Installed Acrobat: C:\Program Files (x86)\Adobe\Reader 10.0\Reader\AcroRd32.exe
Version: 10.1.3.23
Creation Date: 2012/04/04
Creation Time: 01:53:54
Locale: English (United States)
Monitor:
Name: AMD Radeon HD 6300 series Graphics
Resolution: 1920 x 1080 x 60
Bits per pixel: 32
OS Manufacturer: Microsoft Corporation
OS Name: Microsoft Windows Vista
OS Version: 6.1.7601 Service Pack 1
Page File Space: 4194303 KB
Processor: AMD64 Family 20 Model 1 Stepping 0 AuthenticAMD ~1600 Mhz
System Name: GARYSTOASTER-PC
Temporary Directory: C:\Users\GARYST~1\AppData\Local\Temp\
Time Zone: Eastern Standard Time
Total Physical Memory: 4194303 KB
Total Virtual Memory: 2097024 KB
User Name: Garys Toaster
Windows Directory: C:\Windows
Installed plug-ins:
C:\Program Files (x86)\Adobe\Acrobat 9.0\Acrobat\plug_ins\Accessibility.api
Version: 9.5.1.283
Creation Date: 2012/04/19
Creation Time: 22:26:48
C:\Program Files (x86)\Adobe\Acrobat 9.0\Acrobat\plug_ins\AcroForm.api
Version: 9.5.1.283
Creation Date: 2012/04/19
Creation Time: 22:26:47
C:\Program Files (x86)\Adobe\Acrobat 9.0\Acrobat\plug_ins\Annots.api
Version: 9.5.1.283
Creation Date: 2012/04/19
Creation Time: 22:26:52
C:\Program Files (x86)\Adobe\Acrobat 9.0\Acrobat\plug_ins\DigSig.api
Version: 9.5.1.283
Creation Date: 2012/04/19
Creation Time: 22:26:47
C:\Program Files (x86)\Adobe\Acrobat 9.0\Acrobat\plug_ins\EScript.api
Version: 9.5.1.283
Creation Date: 2012/04/19
Creation Time: 22:26:51
C:\Program Files (x86)\Adobe\Acrobat 9.0\Acrobat\plug_ins\IA32.api
Version: 9.5.1.283
Creation Date: 2012/04/19
Creation Time: 22:26:51
C:\Program Files (x86)\Adobe\Acrobat 9.0\Acrobat\plug_ins\ImageConversion.api
Version: 9.5.1.283
Creation Date: 2012/04/19
Creation Time: 22:26:46
C:\Program Files (x86)\Adobe\Acrobat 9.0\Acrobat\plug_ins\MakeAccessible.api
Version: 9.5.1.283
Creation Date: 2012/04/19
Creation Time: 22:26:50
C:\Program Files (x86)\Adobe\Acrobat 9.0\Acrobat\plug_ins\map2pdf\geo.api
Version: 5.7.0.01
Creation Date: 2011/06/08
Creation Time: 12:35:30
C:\Program Files (x86)\Adobe\Acrobat 9.0\Acrobat\plug_ins\map2pdf\geomark.api
Version: 5.7.0.01
Creation Date: 2011/06/08
Creation Time: 12:35:30
C:\Program Files (x86)\Adobe\Acrobat 9.0\Acrobat\plug_ins\map2pdf\jeo.api
Version: 6.0.0.18
Creation Date: 2011/06/08
Creation Time: 12:35:30
C:\Program Files (x86)\Adobe\Acrobat 9.0\Acrobat\plug_ins\PDDom.api
Version: 9.5.1.283
Creation Date: 2012/04/19
Creation Time: 22:26:50
C:\Program Files (x86)\Adobe\Acrobat 9.0\Acrobat\plug_ins\PPKLite.api
Version: 9.5.1.283
Creation Date: 2012/04/19
Creation Time: 22:26:50
C:\Program Files (x86)\Adobe\Acrobat 9.0\Acrobat\plug_ins\Preflight.api
Version: 9.2.0 (065)
Creation Date: 2012/04/19
Creation Time: 22:26:45
C:\Program Files (x86)\Adobe\Acrobat 9.0\Acrobat\plug_ins\reflow.api
Version: 9.5.1.283
Creation Date: 2012/04/19
Creation Time: 22:26:49
C:\Program Files (x86)\Adobe\Acrobat 9.0\Acrobat\plug_ins\SaveAsRTF.api
Version: 9.5.1.283
Creation Date: 2012/04/19
Creation Time: 22:26:49
C:\Program Files (x86)\Adobe\Acrobat 9.0\Acrobat\plug_ins\Search.api
Version: 9.5.1.283
Creation Date: 2012/04/19
Creation Time: 22:26:57
C:\Program Files (x86)\Adobe\Acrobat 9.0\Acrobat\plug_ins\TouchUp.api
Version: 9.5.1.283
Creation Date: 2012/04/19
Creation Time: 22:26:49
C:\Program Files (x86)\Adobe\Acrobat 9.0\Acrobat\plug_ins\Updater.api
Version: 9.5.1.283
Creation Date: 2012/04/19
Creation Time: 22:26:48
C:\Program Files (x86)\Adobe\Acrobat 9.0\Acrobat\plug_ins\weblink.api
Version: 9.5.1.283
Creation Date: 2012/04/19
Creation Time: 22:26:48
C:\Program Files (x86)\Adobe\Acrobat 9.0\Acrobat\plug_ins\WebPDF.api
Version: 9.5.1.283
Creation Date: 2012/04/19
Creation Time: 22:26:45

As far as the images are concerned, that may be a result of your choice of job settings. You may want to use the Press or Print option if the image quality is important. I assume you are talking about bit images in this case.
As to the hangup, have you checked to see if AcroTray is active on your system? It may not be running as needed. In the meantime, try checking print to file and then opening that file in Distiller to complete the conversion to PDF.
Before you ever try a reinstall, you need to do a repair first to see if that resolves the problem. There are a lot of unknowns about your exact process for the printing and your job settings that may be part of the problem. The rest of your system setup is useful in some cases, but did not help me see your problem.

Can Acrobat create a PDF using the same page numbers as FrameMaker?

I'm using FrameMaker 10 on Windows 7 and Acrobat Pro 9. I know I can set the page numbers after I create the PDF (Advanced > Document Processing > Page Numbering), but is there any way to tell Acrobat (or Distiller) to do this automatically based on the page format set up in FrameMaker? Right now, the cover and inside cover have no page numbers, but I could assign them numbers and hide them. The TOC is lower case Roman numerals, and the rest of the book uses Arabic page numbering. Someone has asked whether we can have the page numbers be reflected in the page field so that when you enter page 10, it takes you to page 10 of the book (where 10 appears in the corner of the page), not the tenth page of the PDF, which might land you in the TOC.
We produce PDFs as part of an automated system, which is why I can't mess with it after it's been produced.

There is a FrameMaker plug-in that can do this:
http://www.frameexpert.com/plugins/pagelabeler/index.htm
Or, you might consider using PDFMark to add page labels.

How can I create a chart using data (from formulas) in my header columns?

Hello,
I'm wanting to create a chart using formula totals in my header column. When I attempt to click on the chart icon after selecting my header column, the chart button doesn't appear. Any help would be greatly appreciated. Thanks!

Move your formulas in a non header column.
In the cell A2 of the table "aux", the formula is :
=IF(ISBLANK(main :: A2),"",main :: A2)
then I applied Fill Down.
Yvan KOENIG (VALLAURIS, France) mardi 2 août 2011 15:07:54
iMac 21”5, i7, 2.8 GHz, 4 Gbytes, 1 Tbytes, mac OS X 10.6.8 and 10.7.0
My iDisk is : <http://public.me.com/koenigyvan>
Please : Search for questions similar to your own before submitting them to the community
To be the AW6 successor, iWork MUST integrate a TRUE DB, not a list organizer !

Can't create a pdf, or see preview, from print function in Filemaker

I recently bought a 24" imac with 10.5.6 installed. I transferred everything over from my old G5. Everything works well except one function that I really need.
I Filemaker (8.5), in the print function, if I click on "pdf", the "save as pdf" choice doesn't work. Nothing happens. Also the "preview" button doesn't work. Nothing happens.
I can create a pdf from the "save/send records as" function in the FILE menu, but it's a pain.
The "save as pdf" works in all my other programs except Filemaker.
I've deleted the plist file, reinstalled Filemaker, even called Apple. Nobody seems to have an answer.
Any ideas?
Thanks.
alchait333
Message was edited by: alchait333
Message was edited by: alchait333

As far as the images are concerned, that may be a result of your choice of job settings. You may want to use the Press or Print option if the image quality is important. I assume you are talking about bit images in this case.
As to the hangup, have you checked to see if AcroTray is active on your system? It may not be running as needed. In the meantime, try checking print to file and then opening that file in Distiller to complete the conversion to PDF.
Before you ever try a reinstall, you need to do a repair first to see if that resolves the problem. There are a lot of unknowns about your exact process for the printing and your job settings that may be part of the problem. The rest of your system setup is useful in some cases, but did not help me see your problem.

How can I create a PDF that conforms to PDFX/1-a:2001 form Pages

I have a 358 page B&W document created in PAGES - I need to submit this to the printers (Lightning Source) as a PDFX/1-a:2001. I have Adobe Acrobat Professional and Distiller. However, pdfs created by PAGES cannot be converted by Acrobat into PDFX/1-a:2001 (at least I haven't been able to figure out how to!). The solution proposed by Lightning Source is to:
print to a Postscript file first, then process the PostScript file using Adobe Acrobat Distiller Professional Version 6 or newer.
This allows you to produce a PDF that is of optimal compliance with our printing process (PDFX/1-a:2001 recommended)
The problem is that when PAGES creates the Postscript file it doesn't retain the correct sizing - it shifts it from 216x140mm to Letter size (the original document shifts to the lower-left corner surrounded by blank page). This size change continues when Distiller creates the PDFX/1-a:2001 so their solution doesn't work.
Anyone who has actually achieved this or with suggestions - all advice gratefully received!

Peter, thank you for your suggestions - I was a bit daunted by the colorsync filters, etc., however, after much searching I've put together an apparent solution. I'll find out if it works in a few days when Lightning Source get back to me:
Creating a Lightning Source pdf from a Pages document
Here is a walkthrough of the process I go through to create PDF in the format Lightning Source requires for B&W inner text - PDFX/1-a:2001. You need PAGES, ACROBAT DISTILLER and ACROBAT PROFESSIONAL.
In PRINT dialog go to the PDF button and select SAVE AS POSTSCRIPT.
Open this Postscript file in Distiller, it should save it as PDFX/1-a:2001.
If the page size is incorrect go to the following instructions.
Your pdf should be ready now to go to LS.
IF THE PAGE SIZE HAS BEEN MODIFIED
This was my major challenge as OS X’s export to Postscript seems to modify the file to A4 or Letter size. You need the following Applescript (thanks to Gregory Ledger for this essential tool):
http://macproductionartist.wordpress.com/2009/04/01/really-cropping-pages-in-acr obat/)
tell application "Adobe Acrobat Pro" tell active doc repeat with i from 1 to count of pages tell page i set cbox to crop box set media box to cbox end tell end repeat end tell end tell
With your new pdf opened in Acrobat Professional use the DOCUMENT: CROP PAGES dialog box.
Set the margins of the Crop Box to the required dimensions.
Keep the pdf open in Acrobat Pro.
Now run the APPLESCRIPT above - this modifies the pdf so that the page size is modified to match the new crop size.
Save your pdf and this should now be ready for use at LS.
Gregory Ledger also recommends exporting the cropped pdf to Postscript and then running this through Distiller again to ensure any artefacts are removed.
Thanks again for your time and suggestions, Richard

Can i open a pdf using adobe reader from desktop.

when i tried it did not give adobe reader as one of the options and did recognise it as being one of the options availalbe

i answered it myself. the option to use adobe reader came up the second time i tried

How can I create a ringtone using a song from my itunes library?

I have installed a number of ringtone apps for my iphone to create a special ringtone. I have followed all the steps adding the tune to my itune library, but am unable to complete the final step of moving the tune from the library to 'tone' and then syncing the tune to my iphone as a ringtone. Any suggestions would be appreciated.

In iTunes pref>General - is the Tones option enabled?
When you plug in the Device - from the DEvies window go to the Tones tab at the top and select the Tones that you want to laod on the iPhone.
MJ

HT5071 Can I create a book using the IBooks Author word processing software, save it as a PDF, then have it professionally printed by an offset press to sale in brick and mortar stores? If so, is this procedure free me from any IBooks restrictions?

Can I create a book using the IBooks Author word processing software, save it as a PDF, then have it professionally printed on an offset press to sale in brick and mortar stores? If so, is this procedure free from any IBooks restrictions?

It's your content, under your control.
If you output as an .ibooks file, and you want to sell it, the store is the only outlet, otherwise, you can do as you wish.

Can I create PAdES signature using Adobe Acrobat 8.0 or 9.0?

Hi
Can I create PAdES (PDF Advanced Electronic Signatures, Technical Specification ETSI TS 102 778) signature using Adobe Acrobat 8.0 or 9.0?
ETSI Technical Specification (TS) 102 778 contains five parts:
• Part 1: PAdES Overview – a framework document for PAdES
• Part 2: PAdES Basic – Profile based on ISO 32000-1
• Part 3: PAdES Enhanced – PAdES-Basic Electronic Signatures and PAdES-Explicit Policy Electronic Signatures Profiles
• Part 4: PAdES Long Term – PAdES-Long Term Validation Profile
• Part 5: PAdES for XML Content – Profiles for XAdES signatures of XML content in PDF files
All five parts were published on 31 July 2009.
Thanks for answer.
Dragan

Hi,
The short answer is yes.
Acrobat 8 and later support all of requirements of PAdES such as serial signing, long term validation (time stamping and embedded revocation responses) and signatures in the PKCS#7 format.
Steve

How can I create a pdf file from an existing word file?

I have a valid account on adobe but I can´t create a pdf.... What should I do?

In Adobe Acrobat use the menu File > Create > ...

How do I create a PDF using Acrobat 7.0 in Windows 8 from a Visio drawing on a 64-bit system

I used to be able to create a PDF using Acrobat 7.0 from a Visio drawing in XP. Now I'm running a 64-bit system, no Adobe printer can be installed, and it is unsupported. Help?

On a 32-bit system, there is a workaround. I do not think it is possible to get AA7 to work on a 64-bit system (no one has reported success and only 1 has suggested success with AA8). You may be able to print to a PS file and then open that in Distiller. I suspect that is the only way and you will have to find a decent PS printer driver to do it. I suspect the printer driver (and associated AcroTray) will not work in a 64-bit Win8 -- Acrobat and Distiller may.

Can't create a pdf from a Word docx

I downloaded the trial version of acrobat pro dc but it will not allow me to create a pdf. it says to use the print to pdf option but that is not available. i reinstalled it but that did not fix it.

Hi Rahul, please see my answers below:
Are you using 64bit version of office 2010? - 32bit version
Are you able to convert any other file type into pdf format? - jpgs convert to pdf but no other Office file type will
Also, Do you see any 'convert to Adobe pdf' option when you right click a .docx file? - yes the options are there when I right-click but I get a message saying: "Unable to find "Adobe PDF" Printer or "Acrobat Distiller" printer.
Thanks,
John
Software Support Specialist
Ext. 6332
[email protected]
>>> RahulTyagi4you <[email protected]> 4/18/2015 6:04 AM >>>
Can't create a pdf from a Word docx created by RahulTyagi4you ( https://forums.adobe.com/people/RahulTyagi4you ) in Document Cloud PDF services - View the full discussion ( https://forums.adobe.com/message/7449723#7449723 )
Hi johnm82926422 ( https://forums.adobe.com/people/johnm82926422 ),
I need to know certain things in order to assist you more accurately...!!
Are you using 64bit version of office 2010?
Are you able to convert any other file type into pdf format?
Also, Do you see any 'convert to Adobe pdf' option when you right click a .docx file?
Regards,
Rahul
If the reply above answers your question, please take a moment to mark this answer as correct by visiting: https://forums.adobe.com/message/7449723#7449723 and clicking ‘Correct’ below the answer
Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page:
Please note that the Adobe Forums do not accept email attachments. If you want to embed an image in your message please visit the thread in the forum and click the camera icon: https://forums.adobe.com/message/7449723#7449723
To unsubscribe from this thread, please visit the message page at , click "Following" at the top right, & "Stop Following"
Start a new discussion in Document Cloud PDF services by email ( mailto:[email protected]jivesoftware.com ) or at Adobe Community ( https://forums.adobe.com/choose-container.jspa?contentType=1&containerType=14&container=48 70 )
For more information about maintaining your forum email notifications please go to https://forums.adobe.com/thread/1516624.

How can I create a PDF catalog direct from my website?

I need to be able to easily create a PDF catalog/brochure direct from my website. Can I use the .xml file that I use for the Google Merchant Centre feed to create a catologue as this would seem to be a quick and easy solution. We have 1200 products so creating a PDF catalog from scratch will take a lot of time and effort.

This forum is only to discuss how the forums operate, not products
If you go to the Forums Index http://forums.adobe.com/index.jspa
You will be able to select a forum for an Adobe product to use
You might check the Acrobat forum

Can we create a pdf using data collected from a forms central form?

Similar Messages

Maybe you are looking for