Can we create ACL any where?

Hi,
as a part of my DB migration, i was asked to create the ACLS in the target DB and i am completely new to ACLS. Can any body guide me following points.
1) can i create ACLS in any location. for eg. in my source database. ACL related file is located @
/sys/acls/network_services.xml
but in my TARGET DB can i create in any other location?
for eg in ORACLE_HOME location.
2) How this will be managed in RAC(Active/passive) environment?
Thanks in-advance.
Regards
DBA.

Hi,
1) no you can't , the path /sys/acls is inside the database and not on the filesystem, when you configure an acl using
dbms_network_acl_admin, only refer to the xml filename without the path and the database will take care of properly
storing the xml file in the XDB repository,
2) since it's inside the db and not the filesystem there's no issue with RAC
greetings,
Harm ten Napel
Edited by: hnapel on Dec 31, 2012 4:46 AM

Similar Messages

How to install my WVC210 Wireless-G PTZ Internet Camera so I can view it from any where in the world.

Hi guys I just bught a
WVC210 Wireless-G PTZ Internet Camera
I need to install it so that I can view it from any where in the world. I have no Idea how to do this.
I would like if some one can send me a video tutorial on how to do it.
I have a website that I am runing so I guess I can use that if I need something like Hosting and Domain things.
I want to know if it is posible that I can some how configure it so I can view the camera on one of my websites page.
For exaple: www.example.com/mycamera???
If not well I would love to here the options I have.
Thank you very much in advance!

Rogerio,
I have never seen a router like you have and I wouldn't dare advise you about changing the settings. It appears that it is a router/modem that was provided by your ISP. If this is the case, I recommend that you call your ISP and ask them for Port Forwarding assistance. You need to forward port 80 to the LAN IP address of your camera. The LAN IP address of your camera is the IP address that you use to log into the web interface. You should not need to change any settings on the camera. After you have had the ISP help you forward the port to the camera, go to ipchicken.com and you will see your WAN IP address. Write that address down and then go to a remote location and type it into your web browser. You should get the login page of the camera. Note that your WAN IP is subject to change. You can ask your ISP to provide you with a static IP address which will be an additional charge each month but your IP address will not change. Another option is to use a service such as dyndns to create a unique URL that you can use to access the camera remotely even if your WAN IP address changes. We can discuss that after you get access to the camera if you have further questions.

Acro8pro/Win XP - can't create pdfs any more - says product not activated - then installs but cycle repeats

I have tried reinstalling product, but this doesn't fix problem

What "exactly" do you mean by "...can't create PDFs any more"? If the product says it's not Activate have you launched Acrobat yet?

Networkdriver use to mount Nas or pc share folder plus vpn you can see your file any where

http://www.box.com/s/7jram4o04175189xbpbe
here is network driver after install it you can mount nas or your pc share folder, combine with vpn you can see your file any where it is the good way to replace FTPit.
http://www.tinhte.vn/attachment.php?attachmentid=442957&stc=1&thumb=1&d=1321272433
http://forums.webosnation.com/nelsun-apps/303257-network-drives-enyo-network-drive-mapper.html
Post relates to: HP TouchPad (WiFi)

I was wondering whether it had anything to do with the network I was using. The router I am using can't access the internet and I am using the basic 192.168.1.X setup with 255.255.255.0 as the mask.
My computer has an ip of 192.168.1.2 and the xbox has an ip of 192.168.1.3. However, I am still unable to ping the xbox or even see it show up in the network. I did notice that whenever I am using another router that is connected to the internet, I can see other windows based computers in the network tab in thunar under "windows network"
Also, I do have a username and password associated with the samba setup.. so I assume maybe that has something do with it. I checked the permissions of the share folder and it was root:root with read and write permissions. I know samba is working fairly well.. but for whatever reason I can't get the xbox to connect even while it is on the same local network.

Can I create a network where the Time Capsule gets its internet connection from my iMac?

Hi,
I've recently bought a Time Capsulebut I'm having some problems with it on my university network. It is an Eduroam network, so each computer has to authenticate before it can get an Internet connection – I can't use the Time Capsule normally as it is unable to authenticate to the network. However, I'd like to be able to create a smaller network in my room (with my computer and iDevices on so that I can use Remote and stuff, as well as to potentially get my Xbox and Kindle,which can't connect either, online).
Last time I did this, I had my iMac create an internet connection which it shared with everything else. (This was before I had the Time Capsule.) One way of solving it seems like it might be to share the Wifi internet connection with the Time Capsule through the ethernet, and then the Time Capsule can share the interent to everything else. Would this be possible? Or can you think of any other way that this could be done?
In other terms, I have an iMac, a Time Capsule, an iPhone and iPad, a Kindle and an Xbox. Only the iMac can connect to the internet and I'd like them all to be able to, as well as being on the same network. Is this possible?
Thanks!

DropBox is another possibility for sharing files and it is free for the first 2GB of storage.
Lou Picinich
Member Apple Developers Network
Certified Member Apple Consultants Network
ACSP 10.5 → 10.7, ACTC 10.5 → 10.7
ACS Security & Mobility 10.6
Mobility Technical Competency
[email protected]
www.SystemXperts.com
(623) 512-8992

I have got a new imac - set up my mail to access my hotmail account and i have logged on today and can't find mail any where - this is my first mac !!

I have got a new imac - set up my mail to access my hotmail account and i have logged on today and can't find MY mail ICON any where - this is my first mac !!

Hello
Have you checked the applications folder?
To quickly find it on the top right press the spotlight button it looks like that image
and type in Mail it should appear in the spotlight list, click it to launch mail or alternatively right click it and press open enclosing folder to find out where it has vanished too

Can't create ACL

Hi,
I tried to create a ACL in admin console.
When I go to compatibility security -> ACLs page
and press Create a new ACL link.
An error occured as below.
Any advise?
Thanks.
Error 404--Not Found
From RFC 2068 Hypertext Transfer Protocol -- HTTP/1.1:
10.4.5 404 Not Found
The server has not found anything matching the Request-URI. No indication is given
of whether the condition is temporary or permanent.
If the server does not wish to make this information available to the client,
the status code 403 (Forbidden) can be used instead. The 410 (Gone) status code
SHOULD be used if the server knows, through some internally configurable mechanism,
that an old resource is permanently unavailable and has no forwarding address.

Take a look at the Obj.conf ppath directive for Objects. It will help you for doing this.

How can I create a BlobInputStream (=where do I find the oracle.ord.media package)?

import oracle.ord.media.jai.io.*;
Hello,
does anybody know where I can download this package?
I need it to create a BlobInputStream and then a RenderedImage
from a Stream.
BlobInputStream inStream = new BlobInputStream(blob);
RenderedImage image = JAI.create("stream",inStream);
Please send answers to [email protected]
Many thanks in advance,
Alex

The only download for this is in 9i db. It is in
<ORACLE_HOME>/ord/jlib/ordimimg.jar after you install 9i

How Can I Create a Menu Where the Audio Loops Twice But the Video Loops Forever

I'm wanting to create a 50 second looping menu with a video background and some music, but I only want the music to play twice. After the second time the music plays, I'd like the video background to continue looping, but not have any music.
How could I achieve this while giving the user the ability to make menu selections at any time? I've seen it done on a number of commerically available DVDs and Blu-rays, but I can't figure out how to do it in Encore.
I'm using Encore CS6.
Thanks.

Stan Jones wrote:
I do not know if that works, but I don't see why it wouldn't.
I'm not sure what you're referring to. Are you referring the commercially available DVDs that I've seen achieving what I mentioned in the first post?
There's definately a way to do this, but perhaps Encore just insn't capable. I always find it annoying when a DVD menu loops music or some other audio infinately. I may stick a disc in the player and walk into the other room to do something while it's loading up. I always appreciate it when whoever made the disc only has the music or audio looping a couple of times, then it stops.
Just wish I could do the same.

How can I create a diagram where equal data from different cells will be added to one sector?

Hi,
I'm a new Mac user, so I have a lot of problems and questions every day. Moving to Mac from PC is not an easy thing)
Here is my problem:
I need to create a few diagrams for my science work, but can't correct one mistake. Every time one data from one cell from the table takes its own place in the diagram. But I need to ceparate equal data to show it is one section.
An example:
Sex
Age
Female
18
Female
18
Female
18
Female
25
Female
30
We need to create a diagram to show that we have
60% - 18 years
20% - 25 years
20% - 30 years
But Numbers doesn't show it that way. Here how it does:
So please help me. How can I do that?

Hi ProCauda,
Some example data of people and their age:
The COUNTIF function will give the number of people of each age.
In another table, B2 contains this formula (and Fill Down to the bottom of B)
=COUNTIF(Table 1::B,"="&A2)
In this example, 3 people are 18 years old, 0 people are 19 years old, and so on. Use this table to calculate each age as the % of the total, then use that as the data for your diagram (graph, chart).
Regards,
Ian.

I can't create program any more.

Display an error message like is
[click here|http://hiphotos.baidu.com/zltpc007/pic/item/52cfd1d43e323e20a08bb769.jpeg]
How can I figure this problem out? Thank you!

Hi Joshua Lee,
I saw the message u r getting. Even i have come across such message.
See, at times there are 2 ids, of which 1 is a development id where the abaper can do developments or changes and another one is a sandbox (cross-client) where abaper can only view / debug / test the same programs which u urself develop.
u dont have authorizations to make changes in sandbox.
In such scenario, the abaper writes the code in development client and being cross client, the code automatically gets updated to the sandbox id. (In case of sap scripts, where it is client dependent, u need to use transaction SCC1, to manually send changes from development client to sandbox).
The message u are getting is because, u r in sandbox & u r trying to change something in sandbox, which as i told before has no authorization for making changes. you can just use it for displaying.
Solution : 1) either ask the basis person to give u the authorization for change in that client (not actually recommended)
2) find out which is the client used for development, which has cross client with the one u r trying currently. make changes in that development client and u'll see the changes automatically reflecting in sandbox (the client u r trying to change). thus u wont need to make changes in this client.
Note : Generally sandbox client means, it has all possible test data and programs, just for the sake of testing. and since its for testing, no one is allowed to mess up with the code by changing it. so the change authorization is not given.
If anymore doubts do revert.
Regards,
Radhika

Hi I have iPod touch 2nd gen. I'm trying to find a app WE DOODLE. My friend has it but I can't find it any where I'm just thinking maybe I don't have the up to date app store or something can anyone help? Ty

Hi I'm having trouble finding some apps my friend has. she had the same iPod as me so I don't understand why. I haven't had my iPod long. So I have no idea but can someone help ?

In April 2010 it was removed from the App store. (Via Google)

How do I find the "Preferences" file within Elements 10 to fix the runtime error? I can't find it any where

I am trying to fix the runtime error that occurs when I open the Photoshop Elements 10 editor and shuts down the program. I am using the instructions found on the abode website here:
http://helpx.adobe.com/x-productkb/global/troubleshoot-c-runtime-errors-products.html
There are no good instructions telling me what the Preferences file is named or how to find it. If someone could help that would be great.

If you are using Windows 7 then the preference file that needs to be renamed is at this location:
<C:\Users\USERNAME\AppData\Roaming\Adobe\Photoshop Elements\10.0\Editor>
In the above path, replace USERNAME with your windows profile name which could be something like jblogetc or whatever. Also the preference file is called: Adobe Photoshop Elements 10 Prefs.psp and this needs to be renamed to Adobe Photoshop Elements 10 Prefs.old
Once this done, restart PSE 10 and then see if it works.

Error while relocating (Can't create folder)

I have been running a referenced library for some time now. I seem to have run into a problem where I can no longer move originals from my hard drive to the referenced external drive.
When trying to do so, I get the following message:
Error while relocating (Can’t create folder)
Any ideas what has changed and how to fix this error?
Thanks
Robert

I did the verify disk from drive utility, checked out as ok. I decided to run the repair disk anyways. I first chose the name of the drive "1 TB Seagate" and all was well with both verify and repair.
I then chose "GoFlex Aperture" and did the same. Verify was fine, but as you can see, something is amiss with trying to repair it.
Here's the get info grab.
Here's the console shot, did find something about the goflex aperture database drive, although that is far beyond my ability to comprehend.
I appreciate your help. I'm running to the post office, be back in a bit.
Thanks,
Robert

Is there any exception used any where in the block

Hi All,
Is there is any Exception that can be used inside any where in the pl/sql block.
Thanks & Regards
Srikkanth.M

Yes, Srikanth.. many kind of exceptions are there which can be raised within a pl/sql block, after a begin keyword..
for example: if you have wrote select query, it can raise no data found exception (if select query doesn't return anything), multiple rows fond exception ( if query selects multiple rows) other select query related exceptions like table or column not found..
Exception List is here:
http://download.oracle.com/docs/cd/B10501_01/appdev.920/a96624/07_errs.htm#784
Regards,
Dipali..

Can we create ACL any where?

Similar Messages

Maybe you are looking for