Can we create materialized view on the top of another materialized view.

Hi ,
can we create materialized view on the top of another materialized view.
Thanks
Naveen

Welcome , Just remember is not good apporch to do that since performance when MV refresh
Please mark this thread as answered .

Similar Messages

Please change the view in the top sites, the 6.1 upgrade has reverted back to a plane two dimensional view, which is a little plain. Can I revert back to an older version via my time capsule save?

Please change the view in the top sites, the 6.1 upgrade has reverted back to a plain two-dimensional view, which is a little dated. Can I revert back to an older version via my time capsule save? C'mon Apple upgrades supposed to leap into the future not the past. :-(

Please change the view in the top sites, the 6.1 upgrade has reverted back to a plain two-dimensional view, which is a little dated. Can I revert back to an older version via my time capsule save? C'mon Apple upgrades supposed to leap into the future not the past. :-(

I'm trying to multi-track using an m-audio device, I can record my guitar fine. However, I want to create a new track so I can record an acoustic tambourine over the top. Instead it records the original guitar as well as tambourine? its really annoying

I'm trying to multi-track using an m-audio device, I can record my guitar fine. However, I want to create a new track so I can record an acoustic tambourine over the top. Instead it records the original guitar as well as the tambourine coming out with a really distorted sound. I've managed to record over the top of a guitar before and add diferent riffs and sounds but I've tried all of the settings but its still not working. Basically I want to record different tracks without it recording my previous guitar riffs as well. Help would really be appreciated.

Ah that was it, thanks a lot common sense really but thanks for the help

How can you make your persona show on the top and bottom? Also can you make it bigger at the top to show more of the picture?

How can you make your persona show on the top and bottom?
Also can you make it bigger at the top to show more of the picture?

Add extra empty toolbars if you want to see more of the persona. 
You can create extra toolbars to get extra space via View > Toolbars > Customize 
You have to put something on a toolbar (drag a Space item onto it) before closing the Customize window because empty toolbars are automatically removed. 
See http://kb.mozillazine.org/Toolbar_customization

Can we create two POs for the same 3rd party Sales Order?

Hi MM experts,
Issue: Can we create two POs for the same 3rd party Sales Order
In Third party purchase process, first sales order created with a spl. item category and it creates the PR automatically with the Sales order material and Qty and this PR converted PO.
They got a pur.req. for sale order on same item for same delevery date. They did not get any warning msg. saying that a PO was prviously placed against this sale order.
How it is possible that we were able to place another PO? concern is that second PO was palced against SO which was already used & completed. they were able to place 2 POs for the same customer same delevery date. How it is possible?
If anyone face the same issue, please let me know if you have any answer to this questions.
Thanks in advance.
Suresh.

Suresh,
It is hard for me to give you a definitive answer since you have created a customized solution.
How it is possible that we were able to place another PO? concern is that second PO was palced against SO which was already used & completed. they were able to place 2 POs for the same customer same delevery date. How it is possible?
Normally, the system will not do this. A third party PR or PO will be 'account assigned' to the Sales order. SAP standard 3rd party will not create additional purchase reqs unless there has been manual intervention. Try searching for changes in the Sales order and changes in the original purchase order. They may give you a clue.
I believe the normal Item category for third party SO is TAS (I am working from memory here, I am not in front of a system). I don't know what ZTAG does. I confess I am not an SD expert. You might also want to post your question in an SD forum.
You mention two custom applications, ZMMPLAN and ZSTPMP. These somehow have functionality that is used to help you convert your PRs to POs. If I were in your position, I believe I would also look at these applications for clues to how they might be contributing to your problem. And please don't send me details about these apps. I will not comment on custom code in this forum.
Sorry I can't be of more help.
Rgds,
DB49

Typed material shifts to the top of the page when printed

When I try to print documents, they print out with everything shifted to the top of the page. I have tried cleaning and aligning the print head, and either did not change anything. I also tried to reset the printer by unplugging it, and that did not fix anything either. Thank you

Hi , I would like to be able to help you with your print jobs shifting but I have a few questions first. Is the printer connected directly to a wall outlet or is it in a surge protector or a power bar? We want to connect it to a wall outlet just so we can eliminate the power source as the root cause. See this document for more information about Issues when Connected to an Uninterruptible Power Supply/Power Strip/Surge Protector (Note: This document is not limited to Laserjet printers.)  Do you know if the same thing happens when you print the test report or do a copy?
I just want to make sure it's not something with the hardware itself.  Try to print a Printer Status Report to make sure that the hardware functions correctly.On the printer control panel, swipe the display to scroll to Setup, and then touch the Setup icon (). The Setup menu displays.Touch Print Reports, and then touch Printer Status Report. The printer prints the report.
Figure : Example of a Printer Status Report
You could also make sure the printer has the current firmware updates installed. You can click on this link to learn how to Get Printer Updates for HP Officejet Pro 8610.  If the hardware is working correctly, I would need to know the following to help you further;What program are you printing from?Have you tried printing from another program? You could also try uninstalling and reinstalling the printer software. It is possible that pieces of it may still remain that could interfere with a reinstall. I recommend referencing the steps in this document to make sure you haven't missed anything; HP Single-Function and Multifunction Printers - Uninstalling the Printer Software. You may also want to Delete files using Disk Cleanup.  Other places software drivers may hide would be in your Device Manager.  To Open the Device Manager:
1) Click Start (Or Windows Icon) and enter 'Device Manager' into the Search field.
2) Click on the Device Manager.
3) You may want to click on View, at the top of the windows, and then Show hidden devices.
4) Expand the device types, and check for any driver related to your printer.
5) To remove a device from device manager, right-click the device name from the list and then click Uninstall. * For more information see Device Manager Information for Windows 7. It's the same for XP.  Then download and install the newest HP Officejet Pro 8610 e-All-in-One Printer series Full Feature Software and Drivers.   Please let me know if these steps resolved your issue, or if there is anything else I can do to help.  I look forward to hearing from you!   Thanks,

How can i remove favourite people from the top of my iPhone !

how can i remove favourite people from the top of my iPhone !

Hey donyh1,
Thanks for the question. You can hide the recent contacts in the multitasking screen by navigating to your Contacts settings:
Contacts settings - iPhone
http://help.apple.com/iphone/8/#/iph96b20610
Thanks,
Matt M.

How can I create an element in the model node?

Hi, Experts,
I create a model node that name is containerNode in the contxt. Cadinility is: 1..n
I write the code in the method:
private String getDataForOutputTable( IWDNode wageTypePayslip, IWDNode containerNode ){
 String betrgSumStr = "";
 int index = 0;
 Vector containerVector = new Vector();
 int size = wageTypePayslip.size();
 IWDNodeElement element = containerNode.createElement();// The system report error when I run the application.
 BigDecimal betrgSum = new BigDecimal( 0 );
I try to create a element in the containerNode, But the system report error when I run the application.
java.lang.IllegalArgumentException: model object must not be null
 at com.sap.tc.webdynpro.progmodel.context.ModelNodeElement.<init>(ModelNodeElement.java:66)
 at besuretech.com.wdp.IPrivatePayDataDispView$IOContainerElement.<init>(IPrivatePayDataDispView.java:1537)
 at besuretech.com.wdp.IPrivatePayDataDispView$IContextNode.doCreateElement(IPrivatePayDataDispView.java:88)
 at com.sap.tc.webdynpro.progmodel.context.NodeInfo.createElement(NodeInfo.java:884)
 at com.sap.tc.webdynpro.progmodel.context.Node.createElementInternal(Node.java:1351)
 at com.sap.tc.webdynpro.progmodel.context.Node.createElement(Node.java:1370)
 at besuretech.com.PayDataDispView.getDataForOutputTable(PayDataDispView.java:251)
 at besuretech.com.PayDataDispView.getAllData(PayDataDispView.java:196)
 at besuretech.com.PayDataDispView.onPlugPayListViewIn(PayDataDispView.java:154)
 at besuretech.com.wdp.InternalPayDataDispView.wdInvokeEventHandler(InternalPayDataDispView.java:391)
 at com.sap.tc.webdynpro.progmodel.generation.DelegatingView.invokeEventHandler(DelegatingView.java:87)
 at com.sap.tc.webdynpro.clientserver.cal.ClientApplication.navigate(ClientApplication.java:826)
 at com.sap.tc.webdynpro.clientserver.cal.ClientComponent.navigate(ClientComponent.java:881)
 at com.sap.tc.webdynpro.clientserver.window.WindowPhaseModel.doNavigation(WindowPhaseModel.java:498)
How can I create an element in the model node ?
Best regards,
tao

Hi,
You need to execute the model before creating the element.
Regards
Ayyapparaj

Include or create a view in the database and use this view?

Well, I need to get related data of the main table from another related tables, so one way to do that is to use the Include method in Entity Framework to get this related data.
However, I am thinking in another option, create a view in the database and use this view in entity framework. In this way, I avoid the needed of the include, because I think that is expensive in resources. But I am no very sure about that.
I would like to know if the use of views on entity framework is a good idea to improve the performace or is better to use the include.
For example, if I use the include I have the advantage that I get only one the main record and all the related data I have in the navigation properties, so the info is more shorted.
Which is the advanteges and disadvantages of both methods to get related data in entity framework?
Thank so much.

Hello ComptonAlvaro,
>>I would like to know if the use of views on entity framework is a good idea to improve the performace or is better to use the include.
If your view would use a Join syntax to query master-child relationship tables, it actually is similar with the Include() method which actually results a duplicate records from master table, you could check this
link for detail description.
>>Which is the advanteges and disadvantages of both methods to get related data in entity framework?
One visible difference is that records from Views are not editable by default(if you want edit them, you could refer to this
blog).
In your case, my suggestion that you could use the lazying load which will load the matter table once and disable the trace if you only need to display data.
Regards.
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

I can't click on anything on the top of my screen.. help!

Hello,
When I first got firefox, it worked great, and i fell in love with it. But recently, something's happened. For some reason, I can't click on anything at the top of my screen. For example, if I go to Facebook, you know how you have to type you email and password in? Well it won't let me click in the bow to type them in. I also can't search google or go on youtube because of this. Please help! I've tried a lot, like downloading the newest version a few days ago, but no luck. I'm not sure what else I can try. Any suggestions or things that may get rid of this problem would be much appreciated.

Both the Yahoo! Toolbar extension and the Babylon extension have been reported to cause an issue like that. Disable or uninstall those add-ons.
* https://support.mozilla.com/kb/Troubleshooting+extensions+and+themes

HT5071 Can I create a book using the IBooks Author word processing software, save it as a PDF, then have it professionally printed by an offset press to sale in brick and mortar stores? If so, is this procedure free me from any IBooks restrictions?

Can I create a book using the IBooks Author word processing software, save it as a PDF, then have it professionally printed on an offset press to sale in brick and mortar stores? If so, is this procedure free from any IBooks restrictions?

It's your content, under your control.
If you output as an .ibooks file, and you want to sell it, the store is the only outlet, otherwise, you can do as you wish.

How can I create a drawing like the one pictured from a photo?

How can I create a drawing like the one pictured from a photo?

OK, you are getting closer. Now, use your result, and place a Layer above that. Use the Pen Tool to create the "pen strokes" basically tracing over your background image. Then, when you have created each Path (or Sub-Path), choose Stroke Path, with probably the Pencil Tool and a Brush size that is small enough.
Not sure which versions of PS these are good for, but here are some plug-ins, that might be helpful.
AKVIS Sketch
EdgeLine
Sketch Effects
Sketch Master
I see that one of my old favorites, Flaming Pear's India Ink is not around any more.
Good luck,
Hunt

HT5114 How can I create multiple accounts without the necessity to create multiple email addresses? I now have 2 i-phones (mine and my wife's#, 1 i-pad #mine#, 1 i-pad mini #10 year old's#, and 1 I-pod touch #11 year old's). I would like to maintain pur

How can I create multiple accounts without the necessity to create multiple email addresses? I now have 2 i-phones (mine and my wife's), 1 i-pad (mine), 1 i-pad mini (10 year old's), and 1 I-pod touch (11 year old's). I would like to maintain purchase control, but would like to be able to have a separate account ID for each person. Is that possible?

Each email address can only be on one iTunes account, and all purchases are tied to the account that buys them. If you want to have separate iTunes accounts on each then you will need separate email accounts for each iTunes account

I somehow am in full screen, which means I can't see any information at the top of the screen. How do I get back?

I don't know what other information you need. I have no Firefox or tabs or any other toolbar at the top of my screen. I don't even have a way to sign off the internet. I want to get my home screen back, or any other that will allow me to operate.

You can toggle Full Screen Mode on and off by tapping the F11 key. You can also move your cursor to the top of your screen, toolbars will slide down, right-click in the blank area at the end of the Tab bar, choose "Exit Full Screen Mode".
*See --> http://kb.mozillazine.org/Netbooks#Full_screen
'''If this reply solves your problem, please click "Solved It" next to this reply when signed-in to the forum.'''
Not related to your question, but...
You need to update some plug-ins:
*Plug-in check: https://www-trunk.stage.mozilla.com/en-US/plugincheck/
*Adobe Shockwave for Director Netscape plug-in: [https://support.mozilla.com/en-US/kb/Using%20the%20Shockwave%20plugin%20with%20Firefox#w_installing-shockwave Installing ('''''or Updating''''') the Shockwave plugin with Firefox]

HT1677 iOS 7 for iPad the bookmarks tab is now on the top right hand side how can I change this back to the top left hand side as in the previous versions?

iOS 7 for iPad the bookmarks tab is now on the top right hand side how can I change this back to the top left hand side as in the previous versions? Thanks

Sorry but you can't

Can we create materialized view on the top of another materialized view.

Similar Messages

Maybe you are looking for