Can we delete or cancel a Transfer order after confirmation?
Hi,
We want to delete or Cancel a Transfer order after confirmation.
We reversed PGI, cancelled shipment and trying to delete a line in the delivery, but it says "item already confirmed by TO".
Any pointers?
Thanks
Edited by: Chandru on Jun 28, 2008 3:01 AM
Hello,
Cancellation of TO - LT15.
Cancellation of TO for Storage unit - LT16.
LT0G - Return delivery to stock
Prase
Similar Messages
-
Hi,
I posted a MIGO mvt 101, then I create a TO (transfer order) then I confimed it.
Now when I try to cancel the transfer order system replies with the following error:
Transfer order X already confirmed or cancelled, or cancellat. sent
Message no. L3 354
How can I process it?Hi,
You cannot cancel a TO if it is confirmed. The only exceptions are TOs that were created for deliveries - these TOs can e cancelled via LT0G.
http://help.sap.com/saphelp_47x200/helpdata/en/c6/f83e744afa11d182b90000e829fbfe/frameset.htm
BR
Csaba -
Possible to delete delivery even though Transfer Order exists
Dear Experts
I am able to delete deliveries even though Transfer order exists and confirmed. How can I restrict this as in this Transfer Order remains open without delivery in Place.
Regards,
Neeraj SrivatavaHi Frenchy
Many thanks for your valuable inputs.
What is the reason I can delete delivery even after Transfer Order is confirmed. This will leave the Picked stock stranded in Dispatch area which cannot be linked with any delivery.
Regards,
Edited by: NEERAJ SRIVASTAVA on Aug 13, 2008 2:42 PM -
Report for deleted line-items in Transfer Orders
Dear All,
Please help me in writing the code for "Report for deleted line-items in Transfer Orders".
regards,
nishuThanks. Repor completed.
-
Why can't I change qty of Transfer Order
hi,guys
I had allow partially delivery goods in order, but when I created Transfer Order from delivery order, I found that I can not change pick qty in transfer order, I used LT03 to create transfer order, so, why can't I change pick qty in transfer order, it is gery!!!Hi there,
If you want to process only a partial quantity, then you have to create delivery only for a partial quantity.
In a transfer order TO you have to pick the entire delivery quantity. Partial picking is not allowed in TO. Quantity field is blank in TO.
For eg if you have 100 items in a sales order, but you want to process only 50 now. So create a delivery for 50 items & process TO. If you create delivery for 100 items, do picking in TO for all the 100 items. Just processing TO for 50 items is not permitted. This means that all quantities in delivery has to be picked to PGI.
Regards,
Sivanand -
FM or BAPI for Create/cancel stock transfer order invoice
FM or BAPI for Create/cancel stock transfer order invoice
Thanks and Regards,
Srinivas PHi,
use BAPI_PO_CREATE, po_header-doc_type = 'UB'
Thanks,
Reward If Helpful. -
i used my friends apple id in my device.how can i delete or cancel existing apple id account in my device and use my own
Depending on what you are using the AppleId for specifically, you will need to open the setting s app and sign out of his and sign inwith your own in the following areas:
iCloud
Mail,Contacts,Calendars
FaceTime
iTunes and App Store
Music (only for Home sharing) -
Can I delete the photos from my iPad after i have backed up in the iCloud?
Can I delete the photos from my iPad after i have backed up in the iCloud?
How much space is your Other using? You may be able to reduce.
How Do I Get Rid Of The “Other” Data Stored On My iPad Or iPhone?
http://tinyurl.com/85w6xwn
With an iOS device, the “Other” space in iTunes is used to store things like documents, settings, caches, and a few other important items. If you sync lots of documents to apps like GoodReader, DropCopy, or anything else that reads external files, your storage use can skyrocket. With iOS 5, you can see exactly which applications are taking up the most space. Just head to Settings > General > Usage, and tap the button labeled Show All Apps. The storage section will show you the app and how much storage space it is taking up. Tap on the app name to get a description of the additional storage space being used by the app’s documents and data. You can remove the storage-hogging application and all of its data directly from this screen, or manually remove the data by opening the app. Some applications, especially those designed by Apple, will allow you to remove stored data by swiping from left to right on the item to reveal a Delete button.
Cheers, Tom -
Cancellation of Transfer Order for Grouped Deliveries (Outbound) -Urgent!
Hi SAP Experts,
One of our users created a group for several outbound deliveries. Now the user decided to cancel one of the deliveries for administrative reasons. He cannot cancel the delivery since a transfer order has been created. How can we cancel this TO and the delivery as well?
Please help us with this issue. This is an urgent matter. I am willing to assign points to helpful answers.
Thanks in advance!Hello
Steps to reverse and delete delivery
1. With tcode VL09 reverse the PGI.. ( I hope u did this already)
2. Reverse TO with tcode LT0G
Here u enter WH no and delivery no to be reversed, Movt type 999 and putaway view as 'delivery view' and execute.
Select the line with delivery no and click on 'Return to stock'
this will again generate reversal TO, confirm it.
3. VL02N - Delete the delivery.
Hope this solves ur problem
Award points if found suitable
Amol -
How can I delete pics from photos in order to free up space on my iPod 5 with iOS 8?
In iOS 8, how can I delete pictures from photos app because I have run out of space, I need to delete at least 6 GB of pics. I deleted many purchased apps but it did not restore space. When I connect to iTunes it shows about 4 GB's allocated to documents & Data. I do not have any documents or data , also it shows a couple of GB's allocated to "other" I checked everything on the iPod and the only thing I can see using all my space is the pictures. Almost 12 GB's of space. I have all the videos and pics backed to iPhoto library on my iMac. The trash can is disabled on iPod, but enabled on iPhone and iPad. Why is the delete/trash can feature disable on my iopd? I need to delete the videos and a lot of pics.
Were the photos synced to the iPod?
If so you have to unsync them or use a third-party computer program like TouchCopy or PhoneView
An "other" larger than about 1 1/2 GB indicates corrupted files.
What is the Other on my iPhone and How to Remove It
What is "Other" and What Can I Do About It?
Next, usually restoring from backup eliminated the corrupted files. However, sometimes restoring to factory settings/new iPod is required.
To restore from backup see:
iOS: How to back up
To restore to factory settings/new iPod see:
iTunes: Restoring iOS software -
Issue with Transfer order after inbound delivery
HI SAP Experts ,
we have an issue where User inputed the Inbound delivery and then assigned with Handling Unit and then he has Created the Transfer order and which he has confirmed
later he has Unassigned Handling Unit , know how can he Proceed further
Case 1) I believe he has deleted the Inbound delivry also , How then the Transfer order Movements can be reverted
Case 2) inbound delivery exist in system , in unassigned state wrt Handling unit and Transfer order (Confirmed )also exist , if user Tries for vl09 for Reversing Delivery , system throws error , Reversing not possible -What should be done here
Awarded Full Points for correct answer
Thanks and Regards
AdarshHi
You use LT01 with the reverse movement (1 or 10 higher than the production receipt - standard SAP uses 103 fro GR and 104 for the reversal).
You then want to unprocess the transfer requirement if existent (look up the TR number in the TO header)
And cancel VL09 and then TA LT0G -
Hi all ,
I am in need of a fuction module to create a transfer order ( LT03 ) where i am able to pass / specify the source storage unit / handling unit from which the materials can be taken for the TO.
I also need a function module where i can confirm this TO in LT12.
Thank you in advance.
Ponits for sure!!!Hi,
Use FM : L_TO_CONFIRM to confirm the transfer order.
MOVE wa_to_tab4-tanum TO g_confirm_tab-tanum.
MOVE wa_to_tab4-tapos TO g_confirm_tab-tapos.
MOVE wa_to_tab4-altme TO g_confirm_tab-altme.
MOVE wa_to_tab4-nista TO g_confirm_tab-pickm.
IF NOT wa_to_tab4-vlenr IS INITIAL.
MOVE wa_to_tab4-vlenr TO g_confirm_tab-lenum.
ELSE.
MOVE g_vscfld TO g_confirm_tab-lenum.
ENDIF.
MOVE 'X' TO g_confirm_tab-parti.
IF NOT wa_to_tab4-nlpla_old IS INITIAL AND
NOT wa_to_tab4-nltyp_old IS INITIAL.
MOVE wa_to_tab4-nlpla TO g_confirm_tab-nlpla.
g_confirm_tab-squit = 'X'.
ENDIF.
IF wa_to_tab4-nistm > wa_to_tab4-nista.
l_diff = 'X'.
g_confirm_tab-kzdif = wa_to_tab4-kzdif.
ENDIF.
PERFORM get_bint_param USING g_lgnum wa_to_tab4-vltyp
CHANGING l_returns.
CASE l_returns.
WHEN '1' OR '3'.
IF l_diff EQ 'X'.
MOVE wa_to_tab4-nista TO g_confirm_tab-nista.
g_confirm_tab-ndifa = wa_to_tab4-vsolm - wa_to_tab4-nista.
ELSE.
MOVE wa_to_tab4-nista TO g_confirm_tab-nista.
ENDIF.
WHEN '2'.
IF l_diff EQ 'X'.
g_confirm_tab-diffm = wa_to_tab4-verme - wa_to_tab4-nista.
g_confirm_tab-restm = 0.
ELSE.
g_confirm_tab-restm = wa_to_tab4-verme - wa_to_tab4-nista.
g_confirm_tab-diffm = 0.
ENDIF.
g_confirm_tab-pickm = wa_to_tab4-nista.
CONCATENATE '00' wa_to_tab4-vlenr INTO g_confirm_tab-lenum.
ENDCASE.
APPEND g_confirm_tab.
CALL FUNCTION 'L_TO_CONFIRM'
EXPORTING
i_lgnum = wa_to_tab4-lgnum
i_tanum = wa_to_tab4-tanum
I_SQUIT = ' '
I_QUKNZ = ' '
I_SUBST = ' '
i_qname = sy-uname
i_ename = sy-uname
I_SOLEX = 0
I_PERNR = 0
I_STDAT = INIT_DATUM
I_STUZT = 0
I_ENDAT = INIT_DATUM
I_ENUZT = 0
I_ISTWM = 0
I_KOMIM = ' '
I_EINLM = ' '
I_TBELI = ' '
I_UPDATE_TASK = ' '
i_commit_work = 'X'
I_AUSFB = ' '
TABLES
t_ltap_conf = g_confirm_tab
T_LTAP_CONF_HU =
T_LTAP_CONF_HU_SERIAL =
EXCEPTIONS
to_confirmed = 1
to_doesnt_exist = 2
item_confirmed = 3
item_subsystem = 4
item_doesnt_exist = 5
item_without_zero_stock_check = 6
item_with_zero_stock_check = 7
one_item_with_zero_stock_check = 8
item_su_bulk_storage = 9
item_no_su_bulk_storage = 10
one_item_su_bulk_storage = 11
foreign_lock = 12
squit_or_quantities = 13
vquit_or_quantities = 14
bquit_or_quantities = 15
quantity_wrong = 16
double_lines = 17
kzdif_wrong = 18
no_difference = 19
no_negative_quantities = 20
wrong_zero_stock_check = 21
su_not_found = 22
no_stock_on_su = 23
su_wrong = 24
too_many_su = 25
nothing_to_do = 26
no_unit_of_measure = 27
xfeld_wrong = 28
update_without_commit = 29
no_authority = 30
lqnum_missing = 31
charg_missing = 32
no_sobkz = 33
no_charg = 34
nlpla_wrong = 35
two_step_confirmation_required = 36
two_step_conf_not_allowed = 37
pick_confirmation_missing = 38
quknz_wrong = 39
hu_data_wrong = 40
no_hu_data_required = 41
hu_data_missing = 42
hu_not_found = 43
picking_of_hu_not_possible = 44
not_enough_stock_in_hu = 45
serial_number_data_wrong = 46
serial_numbers_not_required = 47
no_differences_allowed = 48
serial_number_not_available = 49
serial_number_data_missing = 50
to_item_split_not_allowed = 51
OTHERS = 52
Regards
Kannaiah -
Transfer Order Change & Confirmation
Hi,
I have a requirement to confirm the transder order from RF transaction for Picking.
The requirement is for some reason the material is not present in the source bin proposed by the transfer oder, the user must be able to select a function key, where the system must direct him to the next available bin for that material based on the picking strategy.
I dont know how to change the tranfer order and update the destination bin and then confirm.
Is there anyone who can help me with function module or sample code to update the tranfer order with a different destination bin.
Thanks for your help in advance
RajuHi
Have a look at Business Object BUS2018(Warehouse transfer order)
The business object <ZH>Warehouse transfer order</> is an instruction to
move materials from a source storage bin to a destination storage bin
within a warehouse complex at a specified point in time.
<ZH>Structure </>
A warehouse transfer order consists of items that contain the quantity
of the material to be moved and specifies the source and destination
storage bins.
<ZH>Integration</>
A warehouse transfer order can be created based on a customer delivery,
a warehouse transfer request or a posting change notice.
<ZH>Comment</>
Source and destination storage bins can be in different warehouses.
Regards,
Raj -
Need to trigger an idoc from transfer order on confirmation
Hi,
I need to trigger an outbound idoc on the confirmation of a Transfer Order, but I don't know how to do.
The IDoc type i'll use WMTOID02.
Any Help would be greatly appreciated.
Regards,
Supaporn R.Hi
I think you need to do some configuration using OMKY transaction, pls take help from functional consultant
Regards
MD -
Storage Type change in the transfer order after creation with MDE
Hello ,
With the MDE transaction ZMDETSP the transfer between storage locations is done and the transfer order created in the background.
I would like to know if in standard SAP the modification of the storage type is possible after the TO is created therefore also in MDE.
I changed the bin with LT1D but impossible for the storage type.
I know, user exits BUT there must be other solutions, no ?!!
Thanks in advance for your answer(s),
PatriciaYou have to do the configuration to change the storage type in TO.
IMG>LE>WM>Strategies>Activate storage type search , Here you have to give both the storage type.
Also you need to change the storage type at the time of TO creation not duirn confirmation
Maybe you are looking for
-
How do I get my PC's iTunes Library to my iPhone
So I know there is a way to get my PC's iTunes library to play on my iPhone, yet the way eludes me. Can someone please explain it?
-
Problem in starting Managed Servers
I am getting probelm in starting managed servers in WL 6.0,i tried with giving password while starting [wlerror.txt]
-
At the time of open MS office Excel file it shown error message-the workbook can not opened or repaired by Microsoft Excel because it is corrupt.
-
Https changes into http in workshop 8.1
Hi! I've come across a problem in our application, that when I access a page/pageflow/portal using https, the links that I have in f.e. any JSP-pages are rendered in http and not in https as i would hope to. Is there some easy configuration that is n
-
I need help. My daughtér's friend got on her iphone4s and plugged in the wrong passcode so now it's disabled. I did as the directions say and turned the phone off while it is plugged into the usb port while turning it back on, but it doesn't say "d