Can we detect the user first time he logs in ( appln uses embedded ldap )

Hi,
We are using weblogic embedded ldap for authentication in our application
The first time the user logs in to our applicaiton, we need to detect he is log-in the first time,
so take him to change password page.
Can we do like that ?
Regards,
Harsha
Edited by: harsha.karthigai on Aug 28, 2009 5:50 AM

Hi,
By default when you open a report it displays the report exactly as it was last saved. So even if you user views the report
drills down
then closes the report without saving
then views the report immediately
the report will open in its original state. There is no setting which can be amended to change this. It is possible to write your own viewer but that would be a significant piece of work
Regards
Alan

Similar Messages

  • How can  I  restrain the user login portal once, in the same time ???

    Hi
    I need to restrain the user can't repeat to login portal ....
    to reduce portal loading
    How can I restrain the user login portal once, in the same time???
    Which attributs in Identity Manager or amconsole I can do it to restrain the user ??
    tks

    Does your portal support anonymous access? If so, make sure you are using the authlessanonymous mode. This mode only creates one session that is shared for all anonymous users. This is much more efficient than anonymous access, which creates a session for each anonymous user.
    I have no other recommendation for limiting users to a single login. In general, web applications do not behave like this. What if a user closes their browser without logging out? Does the user have to wait until the session times out in order to log back in again?
    The same thing is true for users that are mobile. If a user leaves their office without logging out and then attempts to log in with a laptop in the conference room, then access will be denied in your implementation. Users do not expect this type of limitation being built into the system.
    If you are having problems scaling, then you need to look at your architecture and perhaps add some more resources. Also, make sure you are making efficient use of the authlessanonymous access mode as stated above.
    - Jim

  • HELLO, I UNLOCKED MY 3GS PHONE THEN RESTORED  IT TO FACTORY DEFAULTS THROUGH ITUNES THEN COULD NOT REACTIVATE THE IPHONE, I TRIED SEVERAL TIMES USING WIFI AND ITUNES, IT CAN NOT DETECT THE SIM, SOMEONE PLEASE HELP ME WITH FOLLOW UP, THANKS

    HELLO, I UNLOCKED MY 3GS PHONE THEN RESTORED  IT TO FACTORY DEFAULTS THROUGH ITUNES THEN COULD NOT REACTIVATE THE IPHONE, I TRIED SEVERAL TIMES USING WIFI AND ITUNES, IT CAN NOT DETECT THE SIM, SOMEONE PLEASE HELP ME WITH FOLLOW UP, THANKS

    sir as ur reply i guess that my phone has locked again as i restored to factory defaults, now if i try with a att active sim then can i activate the iphone ? and i think  i need to unlock again if i want to use sim other then att right ? pls reply me in details asap

  • How Can I record the user's logging time?

    How Can I record the user's login time?I create a table containing some column such as record_id,username,start_time,end_time,period.How can I create a process on logging in to record the start_time and a process on logging out to record the end_time?
    Thanks for any help.

    you can refer to the name of the currently logged in user using :APP_USER. to capture the login info, i'd add an htmldb process to my app that fired "After Authentication" and simply inserted :APP_USER and sysdate into my logging table. for the logout case, you could change the "Logout URL" of your current authentication scheme to one that does whatever it's currently doing plus the logging. so i Logout URL of...
    wwv_flow_custom_auth_std.logout?p_this_flow=&APP_ID.&p_next_flow_page_sess=&APP_ID.:101:&APP_SESSION.
    ...and i changed it to something like...
    my_schema_name.my_logout?p_user=&APP_USER.&p_app=&APP_ID.&p_session=&APP_SESSION.
    ...where my_logout was...
    create or replace procedure my_logout(
    p_user in varchar2,
    p_app in varchar2,
    p_session in varchar2) as
    begin
    insert into my_logging_table values (sysdate, 'logged out as '||p_user);
    wwv_flow_custom_auth_std.logout (
    p_this_flow => p_app ,
    p_next_flow_page_sess => p_app||':101');
    end;
    ...and things worked fine.
    hope this helps,
    raj

  • I can't move downloads onto my desktop nor can I move folders around desktop. Have been having trouble with iPhoto also. "Terminal" has shown up on my dock for the first time. I tried repairing using disk utilities.

    I can't move downloads onto my desktop nor can I move folders around desktop. Have been having trouble with iPhoto also. "Terminal" has shown up on my dock for the first time. I tried repairing using disk utilities.Please Help!

    I have the same issue-was there ever a solution that worked? Thanks.

  • How to use different xsl's for user first time logon in OAM

    Hi,
    We have a requirement to use different stylesheets (xsls) for employees and customers in OAM. How we can configure different XSLs for user first time logon to OAM (i.e for change password and configuring challenge and responses).
    Any pointers on this is appreciated.
    Thanks in advance..
    Srikanth

    XSLs displayed are controlled by the StyleCookie. So if you can set the value of this cookie to be different front customers and employees, they will see different styles.
    You can do this in various locations -> from the web server, from the url, custom plugins, etc....
    -Raj

  • For the first time, I'm trying to use adobe premiere elements10 that came with my pc Windows 8. I created a single project, saved it but cannot open it. My pc shows the file I created but I get an error message that says this type file is not supported or

    For the first time, I'm trying to use adobe premiere elements 10 that came with my pc Windows 8. I created a single project, saved it but cannot open it. My pc shows the file I created but I get an error message that says this type file is not supported or the codex is not installed. As a test, I created another very small project and get the same error message, when I try to open it. Pls give me a simple answer, a refund or a phone

    mike frischenmeyer
    What computer operating system is your Premiere Elements 10 running on? And, what video card/graphics card does that computer use?
    Is this the first time you are using Premiere Elements 10 or have you worked with it before successfully? There is no easy solution until we
    know the details and troubleshoot to determined what caused the problem.
    1. Can you open a new project?
    2. After you saved/closed the problem project, did you move, delete, or rename any of the files/folder that were related to the source media
    for that project?
    3. Please review the Adobe document on troubleshooting damaged projects.
    Troubleshoot damaged projects | Adobe Premiere Elements
    4. What are the steps that you are using to reopen this saved closed project.
    a. File Menu/Open Project/Name of Project
    b. Other
    Please review and consider and then we can decide what next based on your further details and results..
    Thank you.
    ATR

  • Ive just upgraded my late 2009 macbook, and things are not working properly. First of all, when I started the computer first time after installing Mountain Lion, some message advised me that some files were impossible to install.

    Ive just upgraded my late 2009 macbook, and things are not working properly. First of all, when I started the computer first time after installing Mountain Lion, some message advised me that some files were impossible to install. Once I wrote my password, and for now on, everytime I start the session, another window advise me that "Java SE 6" is missing, due that, the computer can't run some "CS5Service Manager". If I try to install it, the download ends with an error. If finally, you skip the istallation, you arrive to the dock, but the menu bar at the top of the screen doesn't show up.
    In addition, my trackpad doesn't works either. I can move the arrow but i can't click anywhere, probably because the option of clicking by touching is disabeled and I can't performance a regular click.
    I'll be very glad if someone know what the heck is happening with my computer. Anyway, I'm going to the genius bar next Saturday. Thx!

    We're sorry.
    We can't find the article you're looking for.
    Please return to the Apple Support homepage.
    Sigh.

  • TS1398 Just got the mini, specifically to get jobs on a certain website. Jobs change all the time. When I go to website, it has not updated from the first time I logged in on the mini. It works on my laptop just fine. HELP!

    My sons just bought me an ipad mini especially so that I could check a certain website on which I sign up for jobs throughout the day.  The website is updated constantly throughout the day with new jobs and the status of the jobs I already have accepted and worked on. (It shows the percentage of the job that has been done.)  It worked fine only the first time I logged on with the mini.  Since then (yesterday,) when I check the website, it lets me log in, but I only see the same exact information that was there the first time I went to the website using the mini.  It seems to be 'frozen' on that particular first look.  It doesn't update at all.
    I know it is not updating because I have also been checking with my notebook computer and with the notebook, the website is up to date.
    Maybe its Safari?
    I had the same problem when I used a friend's iPad.
    I wonder if there is a setting or something that I could change to allow the website to update to the time I check it.
    If not, then the ipad mini is a terrible disappointment and I would like to return it.
    If you can help me, I would be extremely grateful.
    Thanks in advance...

    This issue can be caused by corrupted cookies or cookies that are blocked.
    *check the permissions on the about:permissions page and in "Tools > Page Info > Permissions"
    Clear the cache and remove cookies only from websites that cause problems.
    "Clear the Cache":
    *Firefox/Tools > Options > Advanced > Network > Cached Web Content: "Clear Now"
    "Remove Cookies" from sites causing problems:
    *Firefox/Tools > Options > Privacy > "Use custom settings for history" > Cookies: "Show Cookies"
    Start Firefox in <u>[[Safe Mode|Safe Mode]]</u> to check if one of the extensions (Firefox/Tools > Add-ons > Extensions) or if hardware acceleration is causing the problem.
    *Switch to the DEFAULT theme: Firefox/Tools > Add-ons > Appearance
    *Do NOT click the Reset button on the Safe Mode start window
    *https://support.mozilla.org/kb/Safe+Mode
    *https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes

  • Do I need a computer to use my ipad for the very first time?

    I would like to know if I buy an iPad, shall I need to have a computer to start it for the very first time?
    I mean do I need to do plug in or can I start without  plug in?

    The new iPad does not need to be activated using iTunes. You will need a WiFi connection to activate it, but not a computer.
    If you are buying an iPad2, if it does not already have iOS 5 on it, then you would need a computer running the latest version of iTunes,

  • Can I increase the capacity of Time Machine with an external hard drive connected to Time Capsule?

    Can I increase the capacity of Time Machine with an external hard drive connected to Time Capsule via the USB port?  My current Time Machine has a total capacity of 1TB.  I'd like to double or triple its memory.  I don't want to use the external hard drive in lieu of the Time Capsule hard drive.  I'd like to use it in addition to.  Just don't know if/how it's possible.
    This is another one of those questions that I've searched the web for answers, and have gotten tricky answers back.  So now I'm trying to introduce a clean slate to the mix.
    Thank you for your time!

    Well, what you mentioning is possible.  However, I don't know whether it's supported (as in, "easy to set up.").  Time Machine officially supports backing up to a locally attached drive, to a machine running a Time Machine server (i.e. running OS X Server software), and to a Time Capsule.  I don't know that it officially supports a drive attached to an AirPort or to a Time Capsule.  Though I know some people have gotten it to work.
    Best I can say is to try it.  Plug the drive into the Time Capsule, ensure it's shared on the network, and then try and set it as a backup target from a machine in the Time Machine backup panel (you'll need to ensure it's mounted first).  If it works, you're all set.

  • On the web how can I check the user role to display the form suitable for this role i

    Hello
    How can I check on the web the use role to display the a form for each role
    Example
    If the admin login I display admin_form.fmb and if user login I display
    user_form.fmb
    Thankx
    Tamer

    In my forms I hide tab pages according the role using something like the following script in the WHEN_NEW_FORM_INSTANCE trigger.
    So the user can not navigate to tabs which are vorbiden by his role.
    CURSOR users_roles_cur IS SELECT granted_role FROM user_role_privs
    WHERE username=(SELECT user FROM dual);
    user_roles_rec users_roles_cur%ROWTYPE;
    IF users_roles_cur%ISOPEN
    THEN
    CLOSE users_roles_cur;
    END IF;
    OPEN users_roles_cur;
    LOOP
    FETCH users_roles_cur INTO user_roles_rec;
    EXIT WHEN users_roles_cur%NOTFOUND;
    MESSAGE (user_roles_rec.granted_role);
    PAUSE;
    IF RTRIM(user_roles_rec.granted_role,' ') = 'BLA-BLA'
    THEN
    tb_pg_id := FIND_TAB_PAGE('activity');
    IF GET_TAB_PAGE_PROPERTY(tb_pg_id, visible) = 'FALSE' THEN
    SET_TAB_PAGE_PROPERTY(tb_pg_id, visible, property_true);
    END IF;
    END IF;
    END LOOP;
    CLOSE users_roles_cur;
    Other solution may be is to use an initial form which only will detect the user role and run the appropriate form.
    Other solutions are also possible.
    Joseph

  • How can I detect the Mac OS version in JavaScript?

    I know how to detect the OS (e.g. Mac or Win) using navigator.userAgent, but I need a way to know the OSX "version" that the user is running.

    You cannot detect the Mac OS X version directly through JavaScript; you can use this information to determine whether they're using a PowerPC or Intel Mac. If a visitor is using Safari, you can estimate the Mac OS X version by getting the browser's version and then using this table to translate that.
    (19662)

  • I missed the "save password?" prompt the first time I logged in to a site. How do I get it to ask again, or to save the password for that site now??

    The first time I logged in to a site which has now become a frequently used one, I skipped past the prompt where it asks if you want it to save the password so as not to have to type it in each time. I would like to use that option but don't know how to get it to prompt me again so that I can answer "yes" this time.

    Are you still using the original Firefox 3.6 version (Help > About) ?<br />
    If you do then you should update to the latest Firefox 3.6.17 version via Help > Check for Updates.
    Your above posted system details show outdated plugin(s) with known security and stability risks that you should update.
    # Shockwave Flash 10.0 r42
    # Next Generation Java Plug-in 1.6.0_17 for Mozilla browsers
    Update the [[Managing the Flash plugin|Flash]] plugin to the latest version.
    *http://kb.mozillazine.org/Flash
    *http://www.adobe.com/software/flash/about/
    Update the [[Using the Java plugin with Firefox|Java]] plugin to the latest version.
    *http://kb.mozillazine.org/Java
    *http://www.oracle.com/technetwork/java/javase/downloads/index.html (Java Platform: Download JRE)
    Remove cookies here:
    * Tools > Options > Privacy > Cookies: "Show Cookies"
    See:
    *https://support.mozilla.com/kb/Deleting+cookies
    Make sure that you not run Firefox in (permanent) [[Private Browsing]] mode.
    * You enter Private Browsing mode if you select: Tools > Options > Privacy > History: Firefox will: "Never Remember History"
    * To see all History and Cookie settings, choose: Tools > Options > Privacy, choose the setting <b>Firefox will: Use custom settings for history</b>
    * Uncheck: [ ] "Automatically start Firefox in a private browsing session"

  • Can Iphoto display the date and time of a pic on the pic?

    I know I can get info and see a pics info, but can Iphoto display the date and time of a pic on the pic itself?

    Use the Photos->Batch Change menu option to set the Title to Date and Time. That will give you what you want under each thumbnail.
    TIP: For insurance against the iPhoto database corruption that many users have experienced I recommend making a backup copy of the Library6.iPhoto (iPhoto.Library for iPhoto 5 and earlier versions) database file and keep it current. If problems crop up where iPhoto suddenly can't see any photos or thinks there are no photos in the library, replacing the working Library6.iPhoto file with the backup will often get the library back. By keeping it current I mean backup after each import and/or any serious editing or work on books, slideshows, calendars, cards, etc. That insures that if a problem pops up and you do need to replace the database file, you'll retain all those efforts. It doesn't take long to make the backup and it's good insurance.
    I've created an Automator workflow application (requires Tiger or later), iPhoto dB File Backup, that will copy the selected Library6.iPhoto file from your iPhoto Library folder to the Pictures folder, replacing any previous version of it. There are versions that are compatible with iPhoto 5, 6, 7 and 8 libraries and Tiger and Leopard. Just put the application in the Dock and click on it whenever you want to backup the dB file. iPhoto does not have to be closed to run the application, just idle. You can download it at Toad's Cellar. Be sure to read the Read Me pdf file.
    NOTE: iPhoto 8's new option in the library rebuild pane, "Rebuild the iPhoto Library Database from automatic backup" may make this tip obsolete. We'll know when users have occasion to use it and see if that's the case.

Maybe you are looking for