Can we do caluculated keyfigure with in a restricted key figure

can we do caluculated keyfigure with in a restricted key figure give details

Hi,
Calculated key figures consist of formula definitions containing basic key figures, restricted key figures or precalculated key figures.
The key figures that are restricted by one or more characteristic selections can be basic key figures, calculated key figures or key figures that are already restricted.
For more help go to these links,
http://help.sap.com/saphelp_nw04s/helpdata/en/61/d0b143aa26b849b4e79a859ea1d7d1/content.htm
http://help.sap.com/saphelp_nw04s/helpdata/en/13/e072abaddb574284d22361f0b824bf/content.htm
assign points if it helps
Thanks & Regards,
santo

Similar Messages

Can we do caculated keyfigure with in a restricted key figure

can we do caculated keyfigure with in a restricted key figure

[Hello ,|http://chandranonline.blogspot.com]
Yes, an RKF can have CKF,keyfigure and an RKF as well in the restriction.
[Thanks|http://chandranonline.blogspot.com]
[Chandran|http://chandranonline.blogspot.com]

Can't change a Restricted Key Figure technical name in QD BEx 7.1.0

A few days ago I created a new Restricted Key Figure in Query Designer and it was autopopulated with a default technical name. So I immediately changed it to 'ZRNPVORDINTFACTPPP_FY'.
Now, today, I realized that the 'F' in the technical name is a typographical error and I need to remove it. I clicked the Restricted Key Figure on the left from within the list and clicked the Change/Display pencil icon in the properties window, but the Technical Name field is still greyed out. Also tried right clicking and selecting Edit, but same problem.
Would removing all instances of where the figure is used in the query and other queries allow me to change it? Could it be a user rights issue?
As always, thanks for the help!

Hi,
After creating a RKF , you cannot change its technical name.
If the RKF has a lot of restrictions and creation of another similar RKF is a big process ,
you can create a copy of the same through transaction RSZC.
In RSZC , give the source and target cube name as the name of the multiprovider on which your query is built,
select restricted keyfigure ,click on execute , in the list which comes after execute find your KF 'ZRNPVORDINTFACTPPP_FY'
and click on transfer/copy option available.Change the technical name as you want and then click on execute. A similar keyfigure with the desired technical name will be created in query designer ,global keyfigures .
Replace the same with your Old keyfigure in report.

[sapsem] BI-IP: Documents with restricted key figures in WAD

Hello,
we use documents for characteristics in WAD (BI IP) suscessfully.
We would like to use documents also for restricted key figures.
Example:
0Version has "document property" defined in RSA1
We have a restricted keyfigure ED_K10 with the restriction 0VERSION = 10
We are not able to use it, because document functionality can be used
for characteristics only.
Does anyone have an idea what to customise to be able to use documents
also for restricted keyfigures?
regards and thanks in advance for any feedback
Eckhard Lewin

Hi Eckhard,
I think 0version needs "document property" , too !
regards
Paul

How can we restrict Key Figure in the BI System

Hi All,
Can any one explain How can i restrict key figures in BI system.
So when i create a query a specific user can only execute it if a specific key figure is a part of query otherwise he is not allowed to execute a query.
For Example:
A user TEST123 is allowed to execute a query with keyfigure Quantity he is not allowed to execute the query if any other key figure is present in the query
Regards,
Deepak

Hay Diogo,
Bravo...
Your suggetions always work for me. The scenario was that
A user TEST_PLD08 should only allow to see output for the querys which consist of the keyfigure PLDQUACMP and not for other keyfigures while other user TEST_PLD07 is allowed to see the output for querys consist of any of the keyfiguers.
so I have assign a authorization profile PLD_TEST07 to the user TEST_PLD08 with KeyFigures authorization as mentioned below and it is working fine
I EQ :
I EQ PLDQUACMP
You can forward me more scenarios like this if you can think of more it will be really helpful for me
Regards,
Deepak

Can I restrict a restricted key figure on another Key Figure ?

Hi Experts,
I tried to acheive this but was not able to do it.
Can I restrict a restricted key figure on another Key Figure ? I have a restricted key figure named " No of Orders Completed" and I have a key figure " No of Repair Days". I want to only report on the orders which get completed in 5 days.
So I want to restrict " No of orders completed" by key figure "No of repair days" = 5.

Hello
you can create a CKF (If you have RKFs created for No of days and orders completed) or Fomula (if you have selection created for No of days and orders completed) with the following condition.
(No of days <= 5)*No of orders completed + 0
this will give you No of orders completed for all the orders for which no of repair days <= 5.
Do not forget to apply the exception aggregation on the newly create formula. Set exception aggregation as total and reference characteristic as order.
After that creat a condition to hide all the records with 0 in the newly created formula.
I think that should solve your issue.
- Danny
Edited by: Danny Matt on Jul 6, 2009 11:30 AM

Problem with restricted key figures

Hi all,
I have four restricted key figures in my structure each one is restricted Fiscal period with user entry variable but when i execute the report and check one of the restricted keyfigure is actually not restricting the values.
suppose user entered 10.2006 in the selection for fiscal period then one of the column Goods receipts QTY which is restricted with Fiscal period display values other than that of 10.2006
Did anyone faced such problem earlier?
Please let me know if anyone had a clue.
Thanks in advance
Regards
Ajay

Hi gopi,
Thanks for all of the restricted keyfigures it is "include value".
Regards
Ajay

Problem with Restricted Key figure!

Hello BW Gurus,
Currently I am having problem with a report that is using a restricted key figure in the formula. When I filter down this restricted key figure, it is working fine but when I use this restricted key figure in formula that calculate greater than value, its giving me wrong figure and when I calculate less then value, its giving me zero total result. I am drilling down this restricted KF on a hierarchy. Did I miss any setting or do I need to do anything extra for this?
Please let me know and thanks in Advance,
Vaghar.

In that case create two calculated keyfigures CKF1 and CKF2 such that
CKF1 = ((Count >100)*1 + 0)
CKF2 = (Count<100)*1 + 0)
and then define Greater Count as a formula such that
Greater Count = Count (CKF1)
and similarly Lesser Count = Count (CKF2).
where Count is a data function which gives a value of 1 when the operand <>0 and returns a 0 when the operand = 0.
Hope this helps.

Can we give the more than 2 decimals for key figure

Hi,
can we give the more than 2 decimals for key figure while entering the manuall planning.
Ex:There is keyfigure called 0DEBIT which is having values as 1000.00 USD, 137688.00 USD.which are displaying bydefault whenever we entered the values while planing or File.
what Customer is asking us 0DEBIT keyfigure values should be display 1000.0000 USD, 137688.0000 USD. ( added two more decimals for keyfigure value).
Can we maintained decimals more than two.........?
Thanks,
Ven
Edited by: vanarasi venkat on Apr 13, 2009 4:35 AM

Hi,
Though you can specify the no of decimal places for each keyfigure in the 2nd screen of layout builder but say if you have entered scaling factor as 1 and decimal places as 4 and user enters value as 15.2546, then in the cube it will be stored as 15.25 because physically the keyfigure can store values only upto two decimal places, so it will round up the figure to two decimal places. But, if you specify the scaling factor as 2 and decimal places as 4 than value 15.2546 will be stored in the cube as 1525.46.
If above explanation doesn't help you i finding out the solution for your requirement than you have to either change the number of decimal places in the keyfigure or tell user that technically it's not possible in BPS.
Regards,
Deepti

Create restricted key figure with navigation attributes

Hi,
I need to create a restricted key figure using attributes of 0BP_COMPET.
On my report is :
Competitors (0BP_COMPET)
Quantity
Active Competitors = Expiry Date of Minority Status greater than or equal to system date
Inactive Competitors = Expiry Date of Minority Status less than to system date
Note : Expiry Date of Minority Status is a navigation attribute of 0BP_COMPET and system date is generate by variable 0DAT - Current Calendar Day (SAP Exit).
How can i apply the formula?
Thanks

Here's a good How to Document that explains what you are trying to do ....
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/72f4a790-0201-0010-5b89-a42a32223ffc
It is called How to.... Calculate with Attributes.
Brian

Restricted Key Figure with interval variable

Hi,
I've a restricted key figure for KF 0AMOUNT restricted by 0FISCPER. There is a variable restriction on 0FISCPER which determines the period interval in customer exit.
e.g. 001.2008 to 009.2008
The problem is, in query this RKF is returning only the values for period 009.2008. It should return the total for all the periods.
Can you tell me what could be missing?
Regards,
Amit

Hi Amit,
please check the cutomer exit, as the range might not be properly defined in the exit.
Firstly check if the variable is defined as range or single value, and if defined as range please check the below mentioned lines in the exit:
L_S_RANGE-SIGN = 'I'.
L_S_RANGE-OPT = 'BT'.
as they stand for:
SIGN (I)ncluding [ ] or (E)xcluding ] [
OPT Operators: EQ =, BT [ ], LE <=, LT <, GE >=, GT >, CP, and so on.
hope it helps
Regards,
Umesh

Problem with Restricted Key Figures Please Solve

Dear All.
i restrict the key figure on some GL's for Cumulative balance, this RKF show me the result base on the 0CALMONTH which is select in the variable screen.
i created one more RKF with the same GL's but i restrict that RKF also with fix 0Calmonth say DEC2008.
but the problem is when i run the report it shows me that data correct, but when i bring the 0CALMONTH on top of the Key Figure structure it only show me the data for selected month for the fix month RKF the result come empty.
my requirement is that i have to select month range and i need to show every month value minus the Dec2008 value, this only works if i donot bring the 0CALMONTH on top of Key figure structure but i want to keep it on the top of KF structure so i can show each month value - dec2008 value.
Please explain how can i control this.
Kind regards,
Edited by: Zeeshan haider on Nov 11, 2009 9:49 AM
Edited by: Zeeshan haider on Nov 11, 2009 9:59 AM

Dear Chandu.
I am creating the RKF on Cummulative Balance KF by restricting it with some combinations of GL's, let say the name of RKF is TRADE_Accounts.
My requirement is to give Calmonth selection from the variable in interval let say from 01.2009 - 05.2009
i simply want to display TRADE_Account balance for each month in selection but by doing the minus the value of Trade_Account from the same RKF i.e. TRADE_Account_2 which i restrict on DEC2008.
so i created Two RKF for KF cummulative balance one is restricted with 0CALMONTH value for DEC2008 only.
then i create on CKF let TRADE_BALANCE = TRADE_Account2008 - TRADE_Account.
and place the CKF in Key Figure Structure, it work fine but problem comes when i try to bring 0CALMonth on top of key figure structure so i can show the result for each selected month.
when i do this it only shows the Balance for selected months but it did not minus it with the other RKF i.e. TRADE_Account2008.
when for testing i also put the TRADE_Account2008 in Key figure structure it shows empty result when the 0CALMONTH is on top of the Key figure structure.
Please explain how can i achieve this.
Kind regards,

Query with characteristics and NO Key figures

Hi Everyone,
I need to create a query with 3 char ... customer segment, customer type, climate zone. All are characteristics and there are no key figures.
I went through the forum reading similar posts but couldn't figure out the best way.
It can be done using Replacement path, Create formula variable with replacement path of your characteristic. Some posts also talked about writing some code.
Like to know the best way of making this query.
Can you please give me step by step procedure.
Thanks,
Kumar.

I thought, if there are no key figures the query designer might give an error while saving, like "no key figures defined" or something like that. Thats why I came up with the question.
I still have to document the detail requirement of user and he is not available. So just figuring out all the possibilities.

How can we see restricted key figures in Portal

Hello,
We are using 0ANALYSIS_PATTERM template, when we use the "new analysis" and from the drop down at the top (view, query, infoprovider) when we choose the infoprovider as a cube for example (0PU_C02) we can see pretty much like a web version of query designer i guess, we can see all the objects. But is there any way the end user can see the restrcited key figures that are created in the query designer by BW developer, so that they can drag and drop their objects and create a report.
It would be great to have this function.
Thanks,
Kiran

Currently, this is not available. You could have a query that has all RKF as a starting point to achieve this. If you think this would be good to have by default, please log a development request on the OSS Messaging System.

Restricted key figure with operater symbol depending on characteristic v

We have a operating income report that shows actual, forecast and budget amounts, the variance and %variance in its columns and revenue and expense items (Hierarchy nodes, expandable) in its rows.
The %variance key figure for revenue and expenses is calculated the same way, except if it's a expense node it has to be multiplied by -1. We would like to show that key figure in one column only. What would be the easiest way to achieve that?
Thanks a lot,
Fabian

How do you identify the account as revenue or expense...if my understanding of your issue is correct....you must be having a GL Hierarchy (example) in the rows and you are tring to show the actual, plan by value type. To overcome with your issue, the best and definite solution that works (we did have the same approach) is to reverse the sign at the hierarchy level in rsh1 itself than worrying about it in the query.

Can we do caluculated keyfigure with in a restricted key figure

Similar Messages

Maybe you are looking for