Can we do poduct costing with out using cost sheet and overhead rates
Hi,
can we do product costing with out using cost sheets and overhead rates.
In that cast , how the cost estimation happens ?
Hi,
a costing sheet is used to calculate (on a base) overhead values. If you dont need / want to use this functionality just create/use a costing variant where not costing sheet is assigned.
Use this costing variant in CK11N or KKPAN, depending if ou have a quantity structure or not.
best regards, Christian
Similar Messages
-
I would like to know how i can create a bell graph with out using sub VIs, the data that i created consists in 500 readings with values of 0 to 100, i calculated the mean value and standard diviation. I hope some one can help me
Here's a quick example I threw together that generates a sort-of-bell-curve shaped data distribution, then performs the binning and plotting.
-Kevin P.
Message Edited by Kevin Price on 12-01-2006 02:42 PM
Attachments:
Binning example.vi 51 KB
Binning example.png 12 KB -
How to call a stored procedure on time basis with out using sql job and GOTO
Hi,
I wanted to call a stored proc, on time basis ,
please tel me how it can be done with out using sql job , goto .
1) That is, is there any timer aviable in sqlserver.
q2) And which one is better GOTO or sql job.
yours sincerleyRaj, Check if my explanation helps you:
Your job runs every 10 seconds.
Lets say first time you are scheduling and running your job at 12:00:00 PM
Now your proc will start executing.
Say it got finished at 12:00:07.
Now the next schedule time is 12:00:10 PM.
The moment this time hits, the job will get invoked and start executing the proc.
Lets say this time it finished at 12:00:22 PM (It took 2 extra seconds)
This time the scheduled time is already gone (12:00:20 PM), thus it'll now run at the next schedule that is 12:00:30 PM.
Thus if anytime your job takes more than 10 seconds to run, it'll just miss those particular schedules overlapping with execution time. Otherwise you are good to go.
PS: A job is the best way to handle this, in your problem statement you don't need a job but that would be wrong. You have another way to do that, if you keep running your procedure all the time and the moment your timestamp hits a multiple of 10
seconds you can run your logic and then returning to the timer. But this is extremely wrong for a system. Even if your requirement is extremely transactional and complex, I would not suggest this. If the job is taking more than 10seconds (which it might if
your logics inside are complex), you should optimize your code and table architecture.
Chaos isn’t a pit. Chaos is a ladder. Many who try to climb it fail and never get to try again. The fall breaks them. And some are given a chance to climb, but they refuse. They cling to the realm, or the gods, or love. Illusions. Only the ladder is real.
The climb is all there is. -
Cost Sheet and Overheads issue
Hi,
In my costing sheet i have to assign selling overheads.
for that i am collecting all expenses to one selling overheads cost center. so where i have to assign this cost center in costing sheet. upto COGM our company dont want to assign overheads. after assigning of selling overheads COGS should come. my question is where we have to enter our selling overheads cost center to cost sheet and when. please guide me with one example also.<b>Question 1</b>
<b>I have to assign selling overheads. For that, I am collecting all expenses to one selling overheads cost center. So, Where do I have to assign this cost center in costing sheet?</b>
You specify the cost center to where the credit shall go to under Define Credit. This is under Costing Sheet Components > Define Credit. Later you assign the credit under the relevant costing sheet.
<b>Question 2</b>
<b>Upto COGM our company don't want to assign overheads. After assigning of selling overheads COGS should come. My question is where we have to enter our selling overheads cost center to cost sheet and when. please guide me with one example also.</b>
You create the cost component OKTZ, wherein you specify the CC structure. Like, in the cost components with attributes,
10 for Raw materials
20 for Labour
30 for Mfg O'head
40 for Selling OH.
Select the component associated with Selling OH (say 40 here) and click on the magnifier icon (Goto> Details), select the Sales and Administration Costs radio button. This is under the filter criteria for cost component views on itemization. -
Can we do a interface With out assigning the TS and BS to the SWC
Hi,
With out assigning the Technical system and Business system to the particular software component.. can we do the Scenario..
my Scenario is the File to RFC... for this... the Receiver system ( SAP- R/3 ) is need to maintain entry in SLD.. or with out that also can we do the scenario..
Because with out maintaining an entry in the SLD.. under a new software component i have created a scenario... it is working fine.. then why we need to assign the Technical system and Business system to all the SWC 's...
Please clear my doubt
Thanks
JainHey Raj
Even help.sap says we need to use Business system for RFC
For Sender RFC
The communication channel in which the RFC adapter is defined must be defined for a service of type Business System in the area Service Without Party. In the PCK, you must create an empty party record.
For Receiver RFC
The communication channel in which the RFC adapter is defined must be defined for a service of type Business System in the area Service Without Party. In the PCK you must create an empty party record.
http://help.sap.com/saphelp_nw04/helpdata/en/67/6d0540ba5ee569e10000000a155106/frameset.htm
You need to mention Gateway Host and gateway service in SM59 for RFC communication,there you need business system.
Thanx
Aamir -
Analytical reports with out using BI poss ?
Hi,
Got a query
Can we develop any analytical reports on portal which access the data directly from R/3 with out using BI. And it will provide the front end report as it has been already designed.?
Cheers
*RAJ*Hi,
You can also use a Character variable as a msg as follows;
Data : lv_msgtxt(100) type C.
Concatenate 'Email not found for vendor' ':' gv_lifnr into lv_msgtxt Separated by space.
Message lv_msgtxt Type 'S'.
Regards
Karthik D -
How to get the line in the template (smartform) with out using under score
Hi,
How to get the line in the template (smartform) with out using under score,
and how to print the box (line the check box - small squre box (which is used ot mark the tick by the user in front of the item).
Please provide the valueble answer as early as possible.
Thanks,
RaviHi Ravi,
Line -
Use a SMATSTYLE for this purpose.in the smartstyle create a paragraph or character with underline atribute.Then call the smartstyle in the text.
Search SDN with Key <b>UNDERSCORE</b>.. will get few more posts on the same.
For Checkbox - refer link
Re: Quick Question on Smartforms
Re: putting tick mark into check box in smartform
Reward points if this Helps.
Manish
Message was edited by:
Manish Kumar -
Complex Product Costing Scenario- Separate overhead rates to same material
Hello- I have a strangely complex scenario at my current client.
They wish to apply different overhead rates to the same raw material (one material number in SAP) which is a part of two different BOMs to the same Semi-Finished product (one material number in SAP). This semi-finished product needs to be costed 2 different ways with 2 different BOMs, routings and overhead rates and then i need to use mixed costing to come up with a blended rolled-up cost to update in the material master of the semi-finished product. I am able to get past all challenges but the only open item is to be able to apply different overhead rates to the same material.
Limitations:
1- We have to use Standard price, not moving average.
2- Split valuation idea thrown out the window.
3- Using 2 different material numbers for the raw materials thrown out of the window.
4- Business area idea thrown out of the window.
basically, coming back to the original issue at hand, the challenge is to be able to apply different overhead rates to one material number in SAP.Hi
There are available,, But you have thrown them out of the window already
I believe you need to rampup your overhead absorption mechanism... if ovh is dependant on the component, then it should remain fixed/.. however, if it is getting changed bsaed on the parent material, then driver is not the component, but the Parent material
hence, your overhead should be based on Parent material... Assign an overhead group to the Parent material say, 100 and 110 to the 2 Parent materials.... Now you maintain separate % of overhead per overhead group.... BASE would be the raw material consumption cost element
@ Subodh: Do you think above suggestion will work?? I think exit need not be used if I have understood his requirement clear
br, Ajay M -
I bought another iPad for my daugther. Because she has no PC, I loaded her iPad with apps from My PC. Now she is in Oceanside CA. And I am in Iraq with my iPad and PC.. My question is: How can my daughter load some apps of her own? If I buy her iTunes gift cards, can she redeem them on her iPad with out using my Pin number (as that would give her access to my credit card)! I prefer to gifted her purchases, not allow her to purchase with access to my credit card. Can this be done?
well if the ipad is on your itunes account then her apps and music etc will be billed to you. but if you give her gift cards you should take off your credit card because itunes won't tell you when you are all through with your gifted money and are back to useing your credit card until after you have made a purchase
-
can i connect a external hard drive to apple tv 3 generation, for see my movies itunes with out use streaming or icloud? in apple tv 3 and 2?
That i want to know is i can connect a external hard drive to apple tv, for see my movies that i keep in my external hard drive, i dont want to see then whit the streaming and icloud, or used my laptop o pc for access de movies and stuff.
i put iny spanish to, because i feel my english is not so good, but i hope you understand me.
if i can´t connect a external hard drive, wich others media players divices you know that can see itunes movies?
¿quisiera saber si se puede conectar una memoria externa al apple tv, para ver el contenido de itunes que tengo guardado en esa memoria como peliculas, ect?
lo que no quiero es usar la icloud, o el servicio streamig para ver mi contenido, ni tener que usar la computadora para ver mi contenido el la tv?
y de no poderse conectar que otros dispositivos media pleyer conoces para ver peliculas de itunes en la tv?Welcome to the Apple Community.
can i connect a external hard drive to apple tv 3 generation
Unfortunately not. -
How can i get new apple id with out using credit card or visa card
how can i get a new apple id with out using credit card or visa card?
Hi xianlycier06,
If you are looking to create an Apple ID without using a credit card, you may find the following article helpful:
Apple Support: Creating an iTunes Store, App Store, iBooks Store, and Mac App Store account without a credit card
http://support.apple.com/kb/HT2534
Regards,
- Brenden -
I am using i 4 phone. recently I had a problem with my lap top and had formatted hard disk of it. Now I want to sync data in my iphone back to itune on my lap top. how can I perform this task with out loosing data in my i phone.
Hey floridiansue,
Do you have an installed email program such as Microsoft Outlook? If your email is through an online login, such as Gmail, etc, then one will have to create an email association with a program such as Microsoft Outlook on the PC for this Scan to Email system to function.
-------------How do I give Kudos? | How do I mark a post as Solved? --------------------------------------------------------
I am not an HP employee. -
Can I add my digital copy movie to my iTunes with out using the disk, my gateway laptop/netbook does not have a disk drive I have the unused code and everything, I just can't stuck the movie into the computer itself and my desktop computer has no internet on it. Is there a way to add my movie to my iPod touch 2nd generation tuning 4.2.1
Hiya!
It depends on what kind of digital copy you have. This article goes ino details regarding the two types, and depending on the type you have, you may or may not need the DVD to redeem the code.
Transferring video from DVDs with iTunes digital content
http://support.apple.com/kb/HT1539
I hope this helps! Best wishes and good luck! -
How can i get apps with out using credit card info because i do not have a card ?
how can i get apps with out using credit card info because i do not have a card ?
Yo Chris. I've been following your answers to different threads and quite frankly, you're very keen in answering everybody regarding this stupidity that Apple has brought upon its customers. Kudos to you. But the problem is, most of the time, in some devices, your solution doesn't work because the NONE option is not there. The same goes for me.
Meanwhile, I found a temporary workaround for the iPhone 4s, iPad 2 and iPod Touch 4th Gen.
Register a free Apple ID from the iCloud Settings.
Go to Settings>iCloud>Account>Tap Payment Information on the Storage Plan Category.
Fill in the other boxes and choose "None" on Credit Card Information.
That's it! Hope I helped those who still couldn't find the "None" Option.
Must be running IOS 5.0.1 though, else there would be no iCloud. -
)How can we schedule the info package daily run at 6 AM, with out useing in
Hi
Can any one explain 1) what is information broadcasting &how can we use this.
2)What are the settings we have to do when we use the charts in WAD's
3)How can we schedule the info package daily run at 6 AM, with out useing in process chains
Thanks
BharathHi,
Information broadcaster :
you can precalculate and distribute(thru mail) the query, workbook and webtemplate through online link or html file to the receipents (users).
have a look at the below link.
http://help.sap.com/saphelp_nw04/helpdata/en/3a/0e044017355c0ce10000000a1550b0/frameset.htm
Infopackage scheduling:
you can schedule the infopackage daily at your desired time .In the schedule tab ,select the start later in background and in the scheduling option give the date and time and give the period values as daily.
Regards,
Siva.
Maybe you are looking for
-
When I click on a picture or map in i.e. Kijiji real estate pages, Firefox opens it all crunched to the right side of the page. How can I correct this? For instance I view an apartment ad which has various pictures attached. It says click on the pict
-
I'm getting no power on the MacBook when plugged in. The battery has drained.
The battery has drained on my MacBook and the power cord does not seem to connect. The light on the plug does not light. I pulled the battery to reset and plugged it in again but it does not charge or turn on. What can I do now?
-
Hi I was organizing pictures in iphoto. I am new at this. I was deleting a bunch of duplicate pictures and I kept getting a 'warning box" that kept asking "are you sure you want to delete?" I knew I wanted to delete all these pics so I checked the
-
I think not, but... Is possible to activate notifications (badge icon) on Calendar App about birthdays and other events saved in it? Is Apple working on it for next iOS updates? Is there an app in the AppStore that can do that?
-
How to convert a number in to a time string?
I have calculated a time in minutes: 3.75. But I will show it as a time string: 3:45 or 00:03:45 or anything like this. Yes, I can convert it manually, but then I can not use it in a diagram. I have a formula that calculates times for a given diamete