Can we edit the MIRO Document (Text, Payments Terms)

Hi,
While doing MIRO, we entered wrong data for Text, Payments Terms.
Is it possible to edit the above data once the MIRO Document is posted.
Please advice.
Regards,

Hi,
You canu2019t change a invoicing document after it had been posted. You have to cancel it, and register the invoice again.
Filipa

Similar Messages

Adobe Reader XI Pro does not recognize Samsung Multifunction Xpress M2875FD. I can not edit the PDF documents that I scan it. What do I do?

Adobe Reader XI Pro does not recognize Samsung Multifunction Xpress M2875FD. I can not edit the PDF documents that I scan it. What do I do?

We need to find out what you actually have here. There is no Adobe Reader Pro. There is Adobe Reader and Adobe Acrobat Pro.
With Acrobat Pro, you may be able to do some editing after running OCR. With Adobe Reader, you cannot edit.
Which one do you have?

Can I edit the rpt file & change the datasource before loading the report?

We are an ISV and our application has a lot of reports. Our reports use a SQL Server database as the data source and each SQL Server at our customer sites has a different name.
In our testing we have determined that ReportDocument.Load tries to connect to the SQL Server that is saved in the RPT. If it can't fine the SQL Server saved in the RPT the load take about 60 seconds while it is waiting for the SQL Server Connection to time out.
We are using the Visual Studio 2008 version of Crystal Reports. This did not seem to be a problem with VB6/CR8.5.
We would like to edit the RPT and change the data source to the appropriate SQL Server before we call ReportDocument.Load.
Is it possible to edit the rpt file and change the data source before loading the report?
Or is there some way to tell Crystal not to try connecting to the DB
during the report.load?
In our case we will NEVER use the data source that is saved in the RPT, we will always change the data source using ApplyLogOnInfo.
Thanks

HI Todd,
You Can Not edit the report document before ReportDocument.Load() because if you dont load the report then you dont have anything to Edit
But as far as changing the datasource is concerned you can change that at runtime.
For changing the datasource following code will help you if both databases have a same schema :
Code for changing the database
ConnectionInfo crConnectionInfo = new ConnectionInfo();
crConnectionInfo.ServerName = "SERVER";
crConnectionInfo.DatabaseName = "DATABASE";
crConnectionInfo.UserID = "USERID";
crConnectionInfo.Password = "PASSWORD";
// Loop through the ReportObjects in a report and find all the subreports
foreach(ReportObject crReportObject in crReportDocument.ReportDefinition.ReportObjects)
     // Check the kind of the ReportObject, if it is a subreport
     // proceed. If not skip.
     if(crReportObject.Kind == ReportObjectKind.SubreportObject)
          // Get the SubReport in the form of a ReportDocument
          string sSubreportName = ((SubreportObject)crReportObject).SubreportName;
          ReportDocument crSubReportDocument = crReportDocument.OpenSubreport(sSubreportName);
          // Use a loop to go through all the tables in the main report
          foreach(Table crTable in crSubReportDocument.Database.Tables)
// Get the TableLogOnInfo from the Table and then set the new
// ConnectionInfo values.
TableLogOnInfo crLogOnInfo = crTable.LogOnInfo;
crLogOnInfo.ConnectionInfo = crConnectionInfo;
// Apply the TableLogOnInfo
crTable.ApplyLogOnInfo(crLogOnInfo);
// Set the location of the database. This value will vary from database to
// database.
crTable.Location = "DATABASE.OWNER.TABLENAME" or crTable.Locations;
The sample for doing this is available on support site.
Thanks,
Prasad

Once I convert pdf to WORD, why can't I edit the WORD document?

Once i convert PDF to WORD, why can't i edit the WORD document?

Hi sophtex,
Kindly refer this FAQ:Can't edit converted Word or Excel file
Please let me know for further assistance.
Regards,
Florence

I am using CS3 and want to save a file as a pdf where someone can then edit the text. How can I do this please? Thank you :)

I am using CS3 and want to save a file as a pdf where someone can then edit the text. How can I do this please? Thank you

You might be able to use the newest adobe reader program/application for that.
You would have to save your pdf out of photoshop cs3 without any text and then add the text to the pdf in adobe reader.
The text added in adobe reader can't be edited in photoshop, so the other people would have to adobe reader or acrobat to edit the text.
https://helpx.adobe.com/reader.html

I have adobe illustrator CS5. When I save a document as a pdf and open it again later to edit Adobe reader can't read the whole document because it only shows part of the document. It is very frustrating. How can I fix this?

I have adobe illustrator CS5. When I save a document as a pdf and open it again later to edit Adobe reader can't read the whole document because it only shows part of the document. It is very frustrating. How can I fix this?

keokipineapples schrieb:
I do have all of my files I am working on located on an external drive. I plan to transfer them directly to the hard drive
Transfer them to your harddisk immediately.
External drives are not offiially supported and the source of errors of all kinds including complete loss of files.
Illustrator support for networks and removable media

Can I reverse the reversal document of MIRO ?

When i reverse the miro document ,the amount was not correct, Can I reverse the reversal document of MIRO ? if no , then what will be the solution?
Moderator: Please, search before posting

Hi Tamal,
Yes we can reverse the MIRO document.....You can use this T.Code MR8M
Her you can give Material document number.. then Execute it...
Regards
Madhu I

Can I edit the list of words that are suggested when texting?

When inputting letters into the keyboard, suggested words appear when the word is incomplete or misspelled.
Can one edit the list of words that the computer (Iphone 4S) retrieves from?
Thanks!

No, the list isn't directly editable. However, if you reject the suggestion by tapping the "x" it will eventually learn the original word you typed and stop suggesting alternatives.

I am not able to post the MIRO Document with reference of PO

Hello friends
My user while posting the MIRO document TDS (service tax ) amount not appering in the MIRO screen
But last month it was working fine.
before that i have checked out vendor master in that they given tax code properly.
can any body please give me suggestion on the same
Regards
vamsi
Edited by: asuvamsi on Mar 2, 2010 4:53 PM

Hello friends
Thanks For all my problem was resloved
Solution is
An message has been occuring like withhold tax has been refreshed. it is just an information message not an error message. this message will trigger when the trans. type is non project type activity. No back end process has been disturbed due to this message. it just passing the information to the user.
we changed the trans. type to manufacturing activity and it is working fine.
I hope it ll help in future
Thanks and Regards
vamsi

Posting the MIRO Document with reference of PO

Hello friends
while user posting the MIRO Document with reference of PO , he is getting difference in balance
Total amount is 31,237.00
Posting amount is 28,320.05
Balance amount is 2,916.95 this balance amount not getting post in MIRO
Before that i have seen GR amount is 28,320.05 but In IR amount same 28,320.05 but withholding tax tab not appering withholding tax amount
Can any body please help me on the same
Regards
sudharshana vamsi
Edited by: asuvamsi on Feb 24, 2010 1:43 PM

Hello friends
Thanks For all my problem was resloved
Solution is
An message has been occuring like withhold tax has been refreshed. it is just an information message not an error message. this message will trigger when the trans. type is non project type activity. No back end process has been disturbed due to this message. it just passing the information to the user.
we changed the trans. type to manufacturing activity and it is working fine.
I hope it ll help in future
Thanks and Regards
vamsi

Can you edit a pdf document without exporting it into a word document?

Can you edit a pdf document without exporting it into a word document?

Hi sylvias99766822,
You can if you have Acrobat. If you don't, feel free to give it a try. You can download a 30-day trial from http://www.adobe.com/products/acrobat.html.
Keep in mind, though, that Acrobat isn't intended to be a word processor. So, while you can make adjustments to text and graphics, if you need to do a major overhaul of the text in the document, it's best to go back to the source document and edit the content there.
Best,
Sara

How do I drag an image or text box to the "workspace" off of my working file but where I can still see the image and text box for future use?

How do I drag an image or text box to the "workspace" off of my working file but where I can still see the image and text box for future use?
When I drag the item off of the trifold that I am creating, it just disappears but I still want to use it. I just need to move it out of the way to modify other portions of the document.
thanks,
C

Add another page below the current one to use as a storage area. You can't use the grey area around the page for storing items you want to use later.
Go to the Pages Menu>Provide Pages Feedback if you would like to request this feature be added in future versions.

Not able to edit the emailed document to SharePoint library

Did anyone try to edit the Word Documents that are populated from the outlook emails into the SharePoint library using Incoming Email setttings?
This library doesn't have any required cols but still it is giving this error message all the time:
The File cannot be saved because some properties are missing or invalid.
Use the document Information panel to provide the correct property values. errors for required properties are marked with red asterisk and errors for invalid properties are marked with a red dashed border.
When I go to the information panel, I just see a red asterisk beside the
location- populated with the path of the file location.
Does anyone faced this issue before?
Advanced thanks for the help.

Hi,
It seems a default behavior in SharePoint 2010 for an email enabled list.
You can try the workaround below:
1. Go to the doc library where you have enabled incomingemail> go to Library Settings
2. Go to the Content Types section (you have to enable manage Content types
from Advanced Settings if not done already)
3. Add a new content type fromthe list of existing content types > good to try with Basic Page. Make that as the Default (select it as #1).
4. Once you are done with the changes, go to our Outlook client and send an
emailto the same list with an attached Word or Excel file and try Saving it after
Edit.
Xue-mei Chang
TechNet Community Support

How can i edit a PDF document?

would like to edit a pdf doc. how can i do that?

It is always best to edit the source document - MS Word, for example - then create a new PDF. If the source document is not available, you can try saving the PDF as a Word document. Sometimes that works reasonably well, other times not so much. It is possible to make small edits using the Content Editing tools in Acrobat, but do not expect too much. Acrobat is not a word processor.

How to edit the Step status text

For example, I want to change the status result which is produced on a report from 'Passed' to 'GO' or 'Failed' to 'NOGO'. I know that you can edit the report colors for the result text in the Report Options menu, but I can't seem to find a way to edit the actual result text. I've also looked in the horizontal.xsl stylesheet to no avail.

I would start with modifying the report header. In the sequence ModifyReportHeader look at the parameter ReportHeader. It contains the UUT Result, usually "Passed" "Failed", "Error" or "Terminated". Replace that part of the string accordingly.

Can we edit the MIRO Document (Text, Payments Terms)

Similar Messages

Maybe you are looking for